Oligonucleotide Functionalized Microporous Gold Electrode for the Selective and Sensitive Determination of Mercury by Differential Pulse Adsorptive Stripping Voltammetry (DPAdSV)

Abstract

A novel electrode modified with oligonucleotide and microporous gold was fabricated for the determination of mercury by differential pulse adsorptive stripping voltammetry (DPAdSV). Microporous gold was synthesized by electrochemical reduction using dynamic hydrogen bubble template. The oligonucleotide was immobilized on microporous gold by self-assembly. The prepared electrode exhibited an improved electrochemical response for mercury(II) ion because of the large surface area and excellent electron transfer capacity provided by microporous gold and the specific coordination between mercury ion and thymine bases in oligonucleotides. Under the optimal experiment conditions, the oligonucleotide functionalized microporous gold electrode had a linear relationship between the stripping current and mercury ion concentration in the range from 0.5 to 30?µg/L with a detection limit of 0.021?µg/L. Moreover, the prepared electrode exhibited good selectivity, reproducibility, repeatability and stability. Furthermore, the prepared electrode was applied to detect mercury in tap water with satisfactory results.     

Characterization of New Natural Cellulosic Fiber from Acacia leucophloea Bark

There is a need to explore the possibility of natural fibers as a novel reinforcement to fabricate lightweight composite structures. This investigation was aimed at understanding the characteristics of fiber extracted from the bark of the Acacia leucophloea (AL) plant and its physico-chemical properties. Cellulose content (68.09 wt.%), density (1385 kg/m³), crystallinity index (51%), tensile strength (317–1608 MPa), and Young’s modulus (8.41 ? 69.61 GPa) properties were identified in the AL fibers, and thermal studies using TG and DTG analysis revealed that they degraded at a temperature of 220°C with kinetic activation energy of 73.1 kJ/mol.     

Structural characteristics and cyclic voltammetric behaviour of Sonogel-Carbon tyrosinase biosensors. A detailed comparative study of three immobilization matrixes

Structural characteristics an cyclic voltammetry of three amperommetric biosensors based on immobilization of tyrosinase on a Sonogel-Carbon electrode for detection of phenols are described. Cyclic voltammetry was applied to study the electrochemical behaviour of the electrode and the electrochemical reaction on the electrode surface. Scanning electron microscopy, X-ray energy dispersive spectroscopy and atomic force microscopy were used for the structure characterization of the electrode surface, enzyme film and polymers coatings. The influence of additive-protective polymers, such as polyethylene glycol and perfluorinated-Nafion ion-exchanger on the surface of the biosensor were explored.     

Synthesis and characterization of fluoro-substituted polyaniline

Poly(2-fluoroaniline) was prepared by both chemical and electrochemical polymerization in acidic medium. Characterization of poly(2-fluoroaniline) was accomplished experimentally using ultraviolet-visible, Fourier transform infrared, differential scanning calorimetry, thermal gravimetric analysis, and X-ray diffraction techniques, respectively. Scanning electron microscopy studies revealed globular morphology of chemically synthesized poly(2-fluoroaniline). The cyclic voltammetric studies revealed diffusion-controlled phenomenon in electrochemically synthesized poly(2-fluoroaniline).     

Poly(ester sulphonic acid) coated mercury thin film electrodes: characterization and application in batch injection analysis stripping voltammetry of heavy metal ions

Mercury-thin film electrodes coated with a thin film of poly(ester sulphonic acid) (PESA) have been investigated for application in the analysis of trace heavy metals by square wave anodic stripping voltammetry using the batch injection analysis (BIA) technique. Different polymer dispersion concentrations in water/acetone mixed solvent are investigated and are characterised by electrochemical impedance measurements on glassy carbon and on mercury film electrodes. The influence of electrolyte anion, acetate or nitrate, on polymer film properties is demonstrated, acetate buffer being shown to be preferable for stripping voltammetry applications. Although stripping currents are between 30 and 70% less at the coated than at bare mercury thin film electrodes, the influence of model surfactants on stripping response is shown to be very small. The effect of the composition of the modifier film dispersion on calibration plots is shown; however, detection limits of around 5 nM are found for all modified electrodes tested. This coated electrode is an alternative to Nafion-coated mercury thin film electrodes for the analysis of trace metals in complex matrices, particularly useful when there is a high concentration of non-ionic detergents.     

SEM–FTIR spectroscopic evaluation of deterioration in an historic coffered ceiling

Microorganisms generally degrade wood when moisture, oxygen and other environmental factors provide favorable growing conditions. Scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FTIR) were used to study the development and transformation of the products formed during the biomineralization process that follows the deterioration of wood from an historical coffered ceiling (Cloister of St Francesc (XIV century), Palma de Mallorca, Spain). After fungi colonization, cellulose and lignin disappear and inorganic salts are formed. Thus, the secretion of numerous acids (initially oxalic acid) by fungal hyphae also leads to the precipitation of authigenic salts. Damaged cells or tissues enhance the formation and growth of crystals, which is strongly favored by fungi that function as calcification nuclei. Finally, the presence of dihydrated calcium sulfate reveals the contribution of environmental factors to the weathering of wood.     

1-(3-硝基苯基)-3-[4-(苯基偶氮)苯基]-三氮烯修饰碳糊电极测定痕量锡

制备了三氮烯修饰碳糊电极(m-NPPAPT/CPE),并研究了Sn(Ⅱ)在该电极上的吸附伏安行为,建立了一种测定痕量锡(Ⅱ)的新方法。采用二阶导数线性扫描溶出伏安法进行分析。结果表明:在1mL 0.5mol/L HCl溶液中,于-1200mV处搅拌富集一定时间,在-1200～-200mV范围内以150mV/s的扫描速度线性扫描,Sn(Ⅱ)吸附在修饰电极表面,于约-476mV(vs SCE)处产生一个灵敏的阳极溶出峰,峰电流比未修饰电极增大约11倍。其峰电流与Sn(Ⅱ)浓度在4.0×10-10～1.0×10-8 mol/L和1.0×10-8～4.0×10-6 mol/L范围内分两段呈良好线性关系,其线性回归方程分别为ip(μA)=1.646C(μmol/L)+2.9566和ip(μA)=52.804C(μmol/L)-0.6402,相关系数分别为0.9973和0.9967;检出限(S/N=3)为2.7×10-10 mol/L(富集时间120s)。本方法操作简便、灵敏度高,应用于罐头食品中锡含量的测定,结果满意。     

1,2,5-Thiadiazole 2-oxides: selective synthesis,structural characterization,and electrochemical properties

A new general procedure for the selective synthesis of 1,2,5-thiadiazole 2-oxides (including fused derivatives) 8a,b,c,g,h from the reaction of vic-glyoximes with S₂Cl₂ and pyridine in acetonitrile was elaborated together with general procedure for the synthesis of 1,2,5-thiadiazoles 7a–i, 10, 12, and 14 from the same starting materials and reagents. Molecular structures of 3,4-dimethyl-1,2,5-thiadiazole 2-oxide 8a and [1,2,5]thiadiazolo[3,4-b]quinoxaline 10 were confirmed by single-crystal X-ray diffraction. Electrochemical properties of 1,2,5-thiadiazole 2-oxides 8 were studied by cyclic voltammetry and different behavior was observed for monocyclic and benzo-fused derivatives. With compounds 8g and 17, previously unknown deoxygenation of 2,1,3-benzothiadiazole 1-oxides was discovered by electrochemical reduction, and resulted 2,1,3-benzothiadiazoles 7g and 19 were detected in the forms of their radical anions by EPR spectroscopy combined with DFT calculations.     

Determination of 1-aminocyclopropane-1-carboxylic acid in apple extracts by capillary electrophoresis with laser-induced fluorescence detection

A rapid and sensitive method for the determination of 1-aminocyclopropane-1-carboxylic acid (ACC) in apple tissues has been described. This method is based on the derivatization of ACC with 3-(2-furoyl)quinoline-2-carboxaldehyde (FQ), and separation and quantification of the resulting FQ-ACC derivative by capillary electrophoresis coupled to laser-induced fluorescence detection (CE-LIF). Our results indicated that ACC derivatized with FQ could be well separated from other interfering amino acids using 20 mM borate buffer (pH 9.35) containing 40 mM sodium dodecyl sulfate and 10 mM Brij 35. The linearity of ACC was determined in the range from 0.05 to 5 microM with a correlation of 0.9967. The concentration detection limit for ACC was 10 nM (signal-to-noise = 3). The sensitivity and selectivity of this described method allows the analysis of ACC in crude apple extracts without extra purification and enrichment procedure.     

TZAAP-Nafion修饰电极溶出伏安法测定痕量铜

近年来,化学修饰电极以其独特的优越性,在分析测试中具有广阔的应用前景[1-6],因此对于新的修饰剂的研究,以及用修饰电极探讨灵敏度高,选择性好的测定方法具有重要的意义。2[2,3,5-三氮唑偶氮]-5-乙酰基氨基苯酚(2-(2,3,5-triazolylazo)-5-acetam idophenol,简称TZAAP)是一种新合成的有机化合物,其结构式为:由于TZAAP可以和金属离子形成稳定的配合物,在光谱法中可以作为显色剂用于环境及生物样品中微量元素的测定[7,8]。Nafion是一种优良的阳离子交换剂,用作电极修饰材料具有良好的离子交换特性[9]。本文作者制备了TZAAP-Nafion修饰…     

2-(1-Aryliminoethylidene)quinolylnickel(II) dibromides: Synthesis, characterization and ethylene dimerization capability

A series of 2-(1-aryliminoethylidene)quinoline derivatives (L1-L9) and the nickel(II) dibromides (C1-C9) thereof, were synthesized and characterized. The molecular structures of C2 (R¹ = Et, R² = H, R = Me) and C9 (R¹ = ⁱPr, R² = H, R = ⁱPr) were confirmed as being distorted tetrahedral at nickel by single crystal X-ray diffraction. On treatment with diethylaluminium chloride (Et₂AlCl) or ethylaluminum sesquichloride (EASC), these nickel pre-catalysts exhibited high activity for selective ethylene dimerization (0.89-3.29 × 10⁶ g mol⁻¹(Ni) h⁻¹) at 20 °C under 10 atm of ethylene. The influence of the reaction parameters on the catalytic behaviour was investigated for these nickel systems, including variation of Al/Ni molar ratio and reaction temperature.     

TpPa-1/Nafion修饰电极的差分脉冲阳极溶出伏安法同时测定铜离子和汞离子

通过机械化学合成法合成了一种共价有机框架材料TpPa-1,以此作为电极材料制备化学修饰电极,研究了修饰电极的差分脉冲阳极溶出伏安法(DPASV)同时测定铜离子和汞离子。结果表明,TpPa-1/Nafion修饰电极在磷酸盐缓冲溶液中可实现对Cu^2+和Hg^2+的同时检测。Cu^2+的检出限为5.0×10^-8 mol/L线性范围为1.0×10^-7~5.0×10^-5 mol/L,R^2=0.9975。Hg^2+的检出限为1.0×10^-8 mol/L,线性范围为2.0×10^-8~1.0×10^-4 mol/L,R^2=0.9988。采用上述方法对实际样品进行检测,回收率为97.6%~105.5%,RSD均小于4.0%。     

Heteropolyacid/saponite-like clay complexes and their blends in amphiphilic SEBS

A synthetic saponite-like clay, Sumecton SA (SSA), was self-assembled with 12-phosphotungstic acid (PTA) heteropolyacid for the preparation of new hybrid nanocomposites for proton exchange membranes. Thermogravimetric analysis (TGA) and Fourier transformed diffuse reflectance spectroscopy (DRIFT) measurements indicate the formation of robust PTA-SSA complexes. The Keggin structure of PTA is preserved within the complexes and is thermally stable up to 450 °C. The amount of PTA incorporated into the clay depends on the PTA-SSA weight ratio used for the complex preparation. PTA incorporation achieved is approximately 2-3 times the PTA content of most reported literature. However, higher PTA incorporation is accompanied by a significant loss of structural clay integrity. Low PTA-SSA weight ratios tend to preserve clay structure, but do not preclude its general amorphization generated by the PTA acidic treatment. PTA-SSA complexes present a low degree of order. Inorganic complexes were blended by melt extrusion with chemically-modified styrene/ethylene-co-butylene/styrene block copolymer (SEBS). Poly(oxyethylene/oxypropylene)-grafted-SEBS is more efficient than maleic anhydride-grafted-SEBS at dispersing PTA-SSA complexes. For both nanocomposite systems, nanoparticles’ size varies between 30 and 300 nm.     

Microfluidic cells with interdigitated array gold electrodes: Fabrication and electrochemical characterization

Microfluidic flow cells combined with an interdigitated array (IDA) electrode and/or individually driven interdigitated electrodes were fabricated and characterized for application as detectors for flow injection analysis. The gold electrodes were produced by a process involving heat transfer of a toner mask onto the gold surface of a CD-R and etching of the toner-free gold region by short exposure to iodine-iodide solution. The arrays of electrodes with individual area of 0.01 cm² (0.10 cm of length × 0.10 cm of width and separated by gaps of 0.05 or 0.03 cm) were assembled in microfluidic flow cells with 13 or 19 μm channel depth. The electrochemical characterization of the cells was made by voltammetry under stationary conditions and the influence of experimental parameters related to geometry of the channels and electrodes were studied by using K₄Fe(CN)₆ as model system. The obtained results for peaks currents (I_p) are in excellent agreement with the expected ones for a reversible redox system under stationary thin-layer conditions. Two different configurations of the working electrodes, E_i, auxiliary electrode, A, and reference electrode, R, on the chip were examined: E_i/R/A and R/E_i/A, with the first presenting certain uncompensated resistance. This is because the potentiostat actively compensates the iR drop occurring in the electrolyte thin layer between A and R, but not from R to each E_i. This is confirmed by the smaller difference between the cathodic and anodic peak potentials for the second configuration. Evaluation of the microfluidic flow cells combined with (individually driven) interdigitated array electrodes as biamperometric or amperometric detectors for FIA reveals stable and reproducible operation, with peak heights presenting relative standard deviations of less than 2.2%. For electrochemically reversible species, FIA peaks with enhanced current signal were obtained due to redox cycling under flow operation. The versatility of microfluidic flow cells, produced by simple and low-cost technique, associated with the rich information content of electrochemical techniques with arrays of electrodes, opens many future research and application opportunities.     

Metal Precursor Influence on Performance of CuIn1-xGaxSe2 Films

CuIn_1-xGa_xSe₂ (CIGS) films were prepared by a two-stage method, in which Cu-In-Ga metallic precursors were firstly deposited on unheated Mo-coated soda lime glass substrates by direct current sputtering CuGa (20%Ga) and radio frequency sputtering In targets inan Ar atmosphere, followed by selenization at 520 oC for 40 min in Se vapor. By adjust-ing the sputtering thickness ratio of surface CuGa (20%Ga) and bottom CuGa (20%Ga) alloy layers in metal precursor, different CIGS thin films were fabricated. Through X-ray diffraction spectra, Raman spectra, local energy dispersive spectrometer, planar- and cross-sectional views of scanning electron microscopy measurements, it revealed that the CIGS thin films from selenization of metal precursor with CuGa:In:CuGa thickness ratio of 7:20:3 (sample-2-se) was of chalcopyrite structure with the preferred (112) orientation, and the grains sizes ranged from 0.5 μm to 2 μm, and sample-2-se had no binary compound phase of In-Se and order defect compound phase. Consequently, the results of illuminated current-voltage curve and quantum efficiency measurements showed that the CIGS film device made from sample-2-se had relative higher photo-electric conversion efficiency (3.59%) and good spectrum response.     

Differential Pulse Anodic Stripping Voltammetric Determination of Bismuth(III) with 1‐(2‐Pyridylazo)‐2‐naphthol and Ionic Liquid Modified Carbon Paste Electrode

In this paper 1‐(2‐pyridylazo)‐2‐naphthol (PAN) and ionic liquid 1‐ethyl‐3‐methylimidazolium tetrafluoroborate (EMIMBF₄) were mixed with graphite powder to get a modified carbon paste electrode (PAN‐IL‐CPE), which was further used for the sensitive determination of bismuth(III). By the co‐contribution of the formation of PAN‐Bi complex and the accumulation effect of IL, more bismuth(III) was electrodeposited on the surface of the PAN‐IL‐CPE. Then the reduced Bi was oxidized and detected by differential pulse anodic stripping voltammetry (DPASV) with the oxidation peak appeared at 0.17 V (vs. SCE). Under the optimal conditions the oxidation peak current was proportional to the bismuth(III) concentration in the range from 0.04 to 7.5 μmol L^?1 with the detection limit as 3.9 nmol L^?1. The proposed method was successfully applied to the stomach medicine sample detection with good recovery.     

酒石酸与La~(3+)对草酸钙结晶的影响

采用X射线衍射(XRD)、傅立叶红外光谱(FTIR)和扫描电镜(SEM)分析了凝胶体系中混合添加剂酒石酸和La~(3+)对草酸钙(Ca Oxa)晶体生长的影响。研究结果显示,酒石酸可以抑制Ca Oxa晶体的生长、聚集,并诱导二水草酸钙(COD)生成;La~(3+)不仅可诱导COD生成,而且可使一水草酸钙(COM)的形貌发生变化;而酒石酸和La~(3+)的联合作用则不仅增强了对COD的诱导能力,并使COM的聚集程度降低、比表面积减小。酒石酸和La~(3+)的联合疗法对尿石病的预防和治疗有较大的参考价值。     

Ion-exchange and permselectivity properties of poly(sodium 4-styrenesulfonate) coatings on glassy carbon: application in the modification of mercury film electrodes for the direct voltammetric analysis of trace metals in estuarine waters

The present work describes the optimisation and characterization of poly(sodium 4-styrenesulfonate)-coated thin mercury film electrodes (PSS-TMFE) for the direct analysis of trace metals in estuarine waters by square-wave anodic stripping voltammetry (SW-ASV). The morphology, thickness and ion exchange ability of the poly(sodium 4-styrenesulfonate) coatings onto glassy carbon were evaluated and these features particularly favoured the incorporation of cationic species, such as dopamine or lead cation. For the case of the heavy metal cations, a simple, sensitive and very reproducible methodology for their SW-ASV analysis could be developed. In fact, with the PSS-TMFE, a significant increase in the sensitivity of the ASV determination of lead was obtained compared both to the uncoated TMFE (ca. 82%) as well as to Nafion-coated electrodes of similar thickness (ca. 43-49%). Furthermore, the permselectivity of the poly(sodium 4-styrenesulfonate) coatings, based both on electrostatic interaction and molecular size, leads to an improved anti-fouling ability against surfactant species. The analytical usefulness of the poly(sodium 4-styrenesulfonate)-coated thin mercury film electrodes is demonstrated by application to the direct ASV determination of trace heavy metals at the low nanomolar level, in estuarine waters with moderate contents of dissolved organic matter, where the uncoated TMFE failed due to fouling.     

Antibacterial 3-(arylamino)-1-ferrocenylpropan-1-ones: Synthesis, spectral, electrochemical and structural characterization

Syntheses of fourteen new 3-(arylamino)-1-ferrocenylpropan-1-ones have been achieved in good to excellent yields by an aza-Michael addition of different arylamines to acryloylferrocene. The reaction was performed by microwave (MW) irradiation (500 W/5 min) of a mixture of reactants and montmorillonite K-10, without a solvent. The obtained compounds were spectrally and electrochemically (cyclic voltammetry) fully characterized, whereas single-crystal X-ray analysis has been performed for three of them. In a microdilution assay, all of the compounds were shown to have a broad-spectrum effect on Gram-negative and -positive bacteria, although the degree of inhibition varied. A notable activity was observed for all compounds in inhibiting the growth of an important human pathogen Staphylococcus aureus.     

Synthesis and characterization of polymeric triphenyltin and cyclotetrameric tricyclohexyltin 2-(1H-imidazol-1-yl)acetates

The reaction of 2-(1H-imidazol-1-yl)acetic acid with (Ph₃Sn)₂O or Cy₃SnOH (Cy?=?cyclohexyl) yields triphenyltin 2-(1H-imidazol-1-yl)acetate (1) and tricyclohexyltin 2-(1H-imidazol-1-yl)acetate (2), respectively. 2-(1H-imidazol-1-yl)acetates in these two complexes show remarkably different coordination modes. Complex 1 forms a polymeric chain structure through intermolecular Sn–N interactions, while 2 displays a 28-membered macrocyclic tetranuclear structure by the assembly of Sn–N coordination bonds.