A fluorescence reagent for the highly selective recognition and separation of lead ion (II) from aqueous solutions

A new fluorescence reagent, N,N-bi[4(1-pyrene)-butyroyl]-lysine (1) was synthesized. The new fluorescence sensor showed high sensitivity (detection limit up to 20.7 μg L⁻¹) and specific selectivity for Pb²⁺ over other metal ions examined in aqueous solutions. It could also be used to remove Pb²⁺ from aqueous solutions by filtering the insoluble 1–Pb²⁺ complex with sufficient reversibility.     

Design and synthesis of fluorescent 6-aryl[1,2-c]quinazolines serving as selective and sensitive ‘on-off’ chemosensor for Hg in aqueous media

Three fluorescent quinazolines thiophen-2-yl-5,6-dihydrobenzo-[4,5]imidazo[1,2-c]quinazoline (1), pyridin-3-yl-5,6-dihydrobenzo-[4,5]imidazo-[1,2-c]quinazoline (2) and phenyl-5,5′,6,6′-dihydrobenzo-[4,4′,5,5′]imidazo-[1.1′,2-c,2′-c]quinazoline (3) have been synthesized. Structures of 1 and 3 have been authenticated crystallographically. Quinazolines 1-3 exhibit highly selective ‘on-off’ switching for Hg²⁺ ions. The fluorescence intensity displayed a linear relationship with respect to Hg²⁺ concentration (0.1-1.0 μM; R² = 0.99) with detection limit of 2.0 × 10⁻⁷ M.     

Manganese (II) selective PVC based membrane sensor using a Schiff base

N,N′,N″,N′′′-1,5,8,12-tetraazadodecane-bis(salicylaldiminato)(H₂L) has been used as ionophore for preparing Mn²⁺ selective sensor. Membranes of different composition with regard to ratio of H₂L:PVC:NPOE:NaTPB have been prepared and investigated. The best performance was obtained with the membrane of composition 10:150:150:10 (H₂L:PVC:NPOE:NaTPB) (w/w; mg). This membrane generated linear potential response in the concentration range of 5.0 × 10⁻⁶ to 1.0 × 10⁻¹ M with a Nernstian slope of 30.0 mV/decade of activity and fast response time (10 s). Hydrogen ion does not effect to the performance of sensor in the pH range 3.0-6.5. The sensor was found to be sufficient selective for Mn²⁺ over a number of alkali, alkaline and heavy metal ions and could therefore be used for the determination of manganese in various samples by direct potentiometry.     

A convenient synthesis of substituted 2,2′:6′,2″-terpyridines

The 2,2′:6′,2″-terpyridines 8a and 8b were prepared in good yield by reacting α-acetoxy-α-chloro-β-keto-esters 1 (R¹ = ⁿPr and Ph) with the bis-amidrazone 7 and 2,5-norbornadiene 5 in ethanol at reflux.     

Synthesis,crystal structure and DNA-binding properties of ruthenium(II) polypyridyl complexes with dicationic 2,2′-dipyridyl derivatives as ligands

New Ru(II) complexes with dicationic ligand, [Ru(phen)₂L¹]⁴⁺(1) and [Ru(phen)₂L²]⁴⁺(2) (phen = 1,10-phenanthroline; L: L¹ = 5,5′-di(1-(triethylammonio)methyl)-2,2′-dipyridyl cation; L² = 5,5′-di(1-(tributylammonio)methyl)-2,2′-dipyridyl cation) have been synthesized and structurally characterized. The interaction of these complexes with calf thymus DNA (CT-DNA) has been investigated. The intrinsic binding constants (K_b: 1, 7.73 × 10⁴ M⁻¹; 2, 2.50 × 10⁴ M⁻¹) determined by absorption spectral titrations of these complexes with CT-DNA indicate the DNA-binding affinity of 1 is stronger than that of 2. Both complexes can display luminescence either alone in aqueous solution or in the presence of DNA. Equilibrium dialysis experiments monitored by CD spectroscopy reveal the preferential binding of the Δ-enantiomer to the right-handed CT-DNA. DNA-viscosity studies suggest that the binding modes are different, 1 may partially intercalate between DNA base-pairs while 2 most likely interact with DNA in an electrostatic binding mode.     

Structural and magnetic properties of metal complexes with pyridine-2,6-dicarboxylate and 5-(4-bromophenyl)-2,4′-bipyridine

A series of complexes has been synthesized based on pyridine-2,6-dicarboxylate (L1) as the bridging ligand and 5-(4-bromophenyl)-2,4′-bipyridine (L2) as the pendant with different metal ions such as Ni^II, Co^II, and Cu^II, under hydrothermal conditions. In nickel and cobalt complexes [M(L1)(L2)₂ · H₂O]_n (M = Ni²⁺ or Co²⁺), the metal ions are bridged by L1 to form 1D coordination zigzag polymeric chains with L2 pendants possessing hexa-coordinated distorted octahedral geometries. While the copper ions are penta-coordinated by L1 and L2 with distorted square pyramidal geometries forming the tetranuclear cluster with the formula [Cu₄(L1)₄(L2)₄] · 2H₂O. It has been found that both the structure and magnetic property of these complexes are metal ions dependent. Intramolecular antiferromagnetic interactions were observed in the nickel and cobalt 1D coordination polymers, while ferromagnetic coupling was found in the tetranuclear copper cluster. Density functional theory calculations suggested that the O–C–O bridges of L1 in a basal–apical mode are responsible for intracluster intermetallic ferromagnetic exchange for the tetranuclear copper cluster.     

Photoactive building blocks for coordination complexes: Gilding 2,2′:6′,2″-terpyridine

The alkyne unit of 4′-ethynyl-2,2′:6′,2″-terpyridine has been functionalized with Ph₃PAu, (2-tolyl)₃PAu or Au(dppe)Au units to produce compounds 1-3, respectively. These derivatives have been characterized by electrospray mass spectrometry, solution ¹H and ¹³C NMR, UV-Vis and emission spectroscopies, and single crystal X-ray diffraction. In the solid state, molecules of 1 or 2 pack with separated domains of tpy and R₃PAu units; the tpy units in 2 (but not 1) exhibit face-to-face π-stacking. Compound 3 crystallizes as 2(3)^.CHCl₃, and the folded conformation of the dppe backbone results in a short (2.9470(8) Å) aurophilic interaction. Folded molecule 3 captures CHCl₃, preventing intramolecular face-to-face π-interactions between the tpy units. In CH₂Cl₂ solution, 1-3 are emissive when excited between 230 and 300 nm, but over minutes when λ_ex = 230 nm, the emission bands decay as the compounds photodegrade.     

Synthesis,spectral, thermal and BVS investigations on ZnS4N^N/N coordination environment: Single crystal X-ray structures of bis(dibenzyldithiocarbamato)(N^N)Zinc(II) complexes (N^N = 1,10-phenanthroline,tetramethylethylenediamine and 4,4′-bipyridine)

The current paper describes the synthesis and spectral investigations on the adducts of [Zn(dbzdtc)₂] (1) with 1,10-phen (2), tmed (3), 2,2′-bipy (4) and 4,4′-bipy (5) (where, dbzdtc = dibenzyldithiocarbamate anion, 1,10-phen = 1,10-phenanthroline, tmed = tetramethylethylenediamine, 2,2′-bipy = 2,2′-bipyridine, 4,4′-bipy = 4,4′-bipyridne) and single crystal X-ray structures of [Zn(dbzdtc)₂(1,10-phen)] (2) and [Zn(dbzdtc)₂(tmed)] (3) and [Zn(dbzdtc)₂(4,4′-bipy)] (5). ¹H and ¹³C NMR spectra of 1,10-phen, tmed, 2,2′-bipy and 4,4′-bipy adducts were recorded. ¹H NMR spectra of the complexes show the drift of electrons from the nitrogen of the substituents forcing a high electron density towards sulfur via the thioureide π-system. In the ¹³C NMR spectra, the most important thioureide (N¹³CS₂) carbon signals are observed in the region: 206–210 ppm. Fluorescence spectra of complexes (2) and (4) show intense fluorescence due to the presence of rigid conjugate systems such as 1,10-phenanthroline and 2,2′-bipyridine. The observed fluorescence maxima for complexes with an MS₄N₂ chromophore in the visible region are assigned to the metal-to-ligand charge transfer (MLCT) processes. Single crystal X-ray structural analysis of (2) and (3) showed that the zinc atom is in a distorted octahedral environment. Bond Valence Sum was found to be equivalent to 1.865 for (2), 1.681 for (3) supporting the correctness of the determined structure. BVS of (3) deviates from the formal oxidation number of zinc due to the non-aromatic, sterically hindering tetramethyl bonding end of tmed. Thermal studies on the compounds show the formation of Zn(NCS)₂ as an intermediate during the decay.     

A highly selective and sensitive fluorescein-based chemodosimeter for Hg2+ ions in aqueous media

A new fluorescein-based chemodosimeter (II) for Hg²⁺ ion was designed and synthesized, and it displayed excellent selective and sensitive toward Hg²⁺ ion over other commonly metal ions in aqueous media. II was a colorless, non-fluorescent compound. Upon addition of Hg²⁺ to the solution of II, the thiosemicarbazide moiety of II would undergo an irreversible desulfurization reaction to form its corresponding oxadiazole (IV), a colorful and fluorescent product. During this process, the spirocyclic ring of II was opened, causing instantaneous development of visible color and strong fluorescence emission in the range of 500-600 nm. Based on the above mechanism, a fluorogenic Hg²⁺-selective chemodosimeter was developed. The fluorescence increase is linearly with Hg²⁺ concentration up to 1.0 μmol L⁻¹ with a detection limit of 8.5 × 10⁻¹⁰ mol L⁻¹ (3σ). Compared with the rhodamine-type chemodosimeter, II is more stable in aqueous media and exhibits higher sensitivity toward Hg²⁺. The findings suggest that II will serve as a practical chemodosimeter for rapid detection of Hg²⁺ concentrations in realistic media.     

Fluorescence switching of photochromic vinylpyrene-substituted 2′-deoxyguanosine

We synthesized C8-vinylpyrene-substituted 2′-deoxyguanosine ^VPyG and studied the photoregulated reversible E-Z isomerization. When E-isomer was irradiated with visible light (>420 nm), E- toZ-isomerization took place very rapidly, while upon irradiation with UV-light (∼365 nm), Z-isomer was converted to E-isomer. When Z-isomer was illuminated with 365-400 nm light, no fluorescence was observed, while E-isomer showed a very strong fluorescence emission, indicating that ^VPyG could be a useful fluorescence switching molecule.     

Synthesis and photophysical properties of 8-arylbutadienyl 2′-deoxyguanosines

We have developed novel push-pull-type 8-arylbutadienyl 2′-deoxyguanosine derivatives, ^ABG (1a) and ^CBG (1b). These nucleosides exhibit strong solvent polarity dependent fluorescence emission at long wavelength (ca. 490-550 nm). These environmentally sensitive fluorescent deoxyguanosines are powerful tools for structural studies of nucleic acids and also in molecular diagnostics.     

Synthesis,structure, optical and magnetic properties of [CrL(X)3], {L = 4′-(2-pyridyl)-2,2′:6′,2″-terpyridine; X = Cl,N3, NCS}

Three complexes of composition [CrL(X)₃], where L = 4′-(2-pyridyl)-2,2′:6′,2″-terpyridine and X = Cl⁻, N₃⁻, NCS⁻ are synthesized. They are characterized by IR, UV–Vis, fluorescence, EPR spectroscopic, and X-ray crystallographic studies. Structural studies reveal that the Cr(III) ion is coordinated by three N atoms of L in a meridional fashion. The three anions occupy the other three coordination sites completing the mer-N₃Cl₃ (1) and mer-N₃N₃ (2 and 3), distorted octahedral geometry. The Cr–N2 has a shorter length than the Cr–N1 and Cr–N3 distances and the order Cr–N(NCS⁻) < Cr–N(N₃⁻) < Cr–Cl is observed. They exhibit some of the d–d transitions in the visible and intra-ligand transitions in the UV regions. The lowest energy d–d transition follows the trend [CrLCl₃] < [CrL(N₃)₃] < [CrL(NCS)₃] consistent with the spectrochemical series. In DMF, they exhibit fluorescence having π → π^∗ character. All the complexes show a rhombic splitting as well as zero-field splitting (zfs) in X-band EPR spectra at 77 K.     

Synthesis and thermal reaction of hydrido(selenolato) platinum(II) complex having a 9,10,11,12,14,15-hexahydro-9,10[3′,4′]-furanoanthracenyl group

The oxidative addition of selenol, HhfSeH (2, Hhf = 9,10,11,12,14,15-hexahydro-9,10[3′,4′]-furanoanthracenyl) with [Pt(η²-nb)(Ph₃P)₂] (nb = norbornene) in toluene afforded the corresponding hydrido(selenolato) Pt(II) complex [cis-PtH(SeHhf)(Ph₃P)₂] (3) as a stable compound. Refluxing a xylene solution of 3 produced two isomers of five-membered selenaplatinacycles 4 in moderate yield as an inseparable mixture. In addition, the molecular structures of HhfSeH 2 and the minor selenaplatinacycle 4a were determined by X-ray crystallography.     

A pyrazolyl-terminated 2,2′:6′,2″-terpyridine ligand: Iron(II), ruthenium(II) and palladium(II) complexes of 4′-(3,5-dimethylpyrazol-1-yl)-2,2′:6′,2″-terpyridine

The preparation of 4′-(3,5-dimethylpyrazol-1-yl)-2,2′:6′,2″-terpyridine (2) under acidic conditions results in the formation of the salts [H₂2][MeOSO₃]₂ and [H₂2][EtOSO₃]₂, treatment of which with base leads to neutral 2. The structure of [H₂2][EtOSO₃]₂ · H₂O has been established by single crystal X-ray diffraction. The complexes [Fe(2)₂][PF₆]₂ and [Ru(2)₂][PF₆]₂ have been prepared and characterized, and the single crystal structure determination of [Ru(2)₂][PF₆]₂ is reported; [Fe(2)₂][PF₆]₂ is isostructural with [Ru(2)₂][PF₆]₂. Treatment of [Fe(2)₂]²⁺ with PdCl₂ produces [Pd(2)Cl]⁺, isolated and structurally characterized as the hexafluoridophosphate salt, illustrating that metal exchange within the tpy-binding domain occurs in preference to palladium(II) coordination by the N-donor atom of the pendant 3,5-dimethylpyrazol-1-yl unit in 2. [Pd(2)Cl]²⁺ can also be prepared from PdCl₂ and [H₂2][MeOSO₃]₂ in refluxing methanol.     

Weak ferromagnetism in 1D coordination polymers: Syntheses,crystal structures,spectroscopic and magnetic properties of [Cu(L)(Memal)]n (Memal = the dianion of methylmalonic acid,L = 1,10-phenanthroline, 2,2′-bipyridine)

Investigation of the CuCl₂/H₂Memal/L (H₂Memal = methylmalonic acid, L = 1,10-phenanthroline or 2,2′-bipyridine) reaction system in MeOH and various molar ratios has lead to the isolation of two one-dimensional coordination polymers presenting the [Cu(L)(Memal)] repeating unit (1, L = 1,10-phen; 2, L = 2,2′-bpy). The Memal²⁻ ligand adopts the bidentate [chelating] + unidentate coordination mode between the Cu^II ions. Magnetic susceptibility measurements on 1 and 2 indicated the existence of weak ferromagnetic intrachain interactions and X-band EPR spectra from powdered samples of 1 and 2 are consistent with the stereochemistry of the Cu^II ions and with the presence of weak exchange interactions.     

A selective fluorescent sensor for Pb(II) in water

A new fluorescent sensor (1) containing bis(2-pyridylmethyl)amine group as a binding moiety for Pb²⁺ was developed. Compound 1 shows selective response to Pb²⁺ over other metal ions in pH 7.0 HEPES buffer solution. The fluorescence intensity enhancement was ascribed to the complex formation between Pb²⁺ and 1 which blocked the photo-induced electron transfer process.     

Reactivity of M(en)Cl2 (M = Pd/Pt,en = 1,2-diaminoethane) with N,N′-bis(salicylidene)-p-phenylenediamine: Binding with hexafluorobenzene

Schiff base N,N′-bis(salicylidene)-p-phenylenediamine (LH₂) complexed with Pt(en)Cl₂ and Pd(en)Cl₂ provided [Pt(en)L]₂ · 4PF₆ (1) and Pd(Salen) (2) (Salen = N,N′-bis(salicylidene)-ethylenediamine), respectively, which were characterized by their elemental analysis, spectroscopic data and X-ray data. A solid complex obtained by the reaction of hexafluorobenzene (hfb) with the representative complex 1 has been isolated and characterized as 3 (1 · hfb) using UV–Vis, NMR (¹H, ¹³C and ¹⁹F) data. A solid complex of hfb with a reported Zn-cyclophane 4 has also been prepared and characterized 5 (4 · hfb) for comparison with complex 3. The association of hfb with 1 and 4 has also been monitored using UV–Vis and luminescence data.     

Fluorogenic ratiometric dipodal optode containing imine-amide linkages: Exploiting subtle thorium (IV) ion sensing

The (13E,19E)-N1′,N3′-bis[4-(diethylamino)-2-hydroxybenzylidene]malonohydrazide (L) has been developed for the detection of Th⁴⁺ ions using dual channel signalling system. The UV–vis absorbance and fluorescence spectroscopic data revealed the formation of L–Th⁴⁺ complex in 1:1 equilibrium. The density functional theory (DFT) also confirms the optimum binding cavity for the recognition of metal ion. The binding constant computed from different mathematical models for an assembly of L–Th⁴⁺. The detection limit of L for Th⁴⁺ recognition is to a concentration down to 0.1 μM (0.023 μg g⁻¹). The present sensing system is also successfully applied for the detection of Th⁴⁺ ion present in soil near nuclear atomic plants.