Triazolo-linked cinchona alkaloid carbamate anion exchange-type chiral stationary phases: Synthesis by click chemistry and evaluation

Immobilization strategy based on Huisgen 1,3-dipolar cycloaddition (click chemistry) of 10,11-didehydrocinchona tert-butylcarbamates to azido-grafted silica gels has been evaluated for preparation of novel chiral stationary phases (CSP 1-3). The resultant 1,2,3-triazole-linked CSPs were tested under various mobile phase conditions (polar organic and reversed phase mode) with a representative set of structurally diverse racemic acids including N-protected aminoacids, aromatic and aryloxycarboxylic acids as well as binaphthol phosphate. The chiral recognition performance of the C3-triazole-linked CSPs was found to mirror largely that of the known C3-thioether-linked CSP in terms of elution order, enantioselectivity and retention behavior. In an effort to assess the non-specific binding expressed as retention increment of these triazole-linked CSPs, the parent azidopropyl- and triazole-modified silica materials (thus not containing the chiral head ligand) were studied independently. Compared with the corresponding CSPs, the analyte retention on the azidopropyl control column was very low, and practically negligible on the corresponding triazole-modified reference column. Only minor losses in analyte retention behavior (<5%) were observed with triazole-linked CSPs after two month of continuous use with polar-organic and reversed-phase-type mobile phases, highlighting the excellent stability of the 1,2,3-triazole linker.     

反相毛细管整体柱的制备及其在多肽混合物分离中的应用

采用甲基丙烯酸月桂酯为基础功能单体,乙二醇二甲基丙烯酸酯为交联剂,正十二醇、1,4-丁二醇及二甲基亚砜为致孔剂,在内径为75 μm的石英毛细管内制备了具有良好机械性能及化学稳定性的反相毛细管整体柱。考察了致孔剂的种类、比例以及交联剂在单体混合物中的比例对柱压和分离效果的影响;以单体15%、交联剂15%、致孔剂70%(均为质量分数)作为优化配方,在70 ℃条件下反应24 h;并对所合成的毛细管整体柱进行了电镜表征,测试了流速、柱长与柱压的关系。结果表明,毛细管整体柱的通透性良好,可通过延长柱长的方法提高分离效果。将所制备的毛细管整体柱装于纳升级高效液相色谱仪上进行牛血清白蛋白及血浆样本的胰蛋白酶酶切液的分离,获得了比较理想的分离效果。     

Click chemistry for facile immobilization of cyclodextrin derivatives onto silica as chiral stationary phases

Click chemistry was applied to immobilize mono-azido-β-cyclodextrin derivatives onto the surface of silica to give novel chiral stationary phases (CSPs). The desired CSPs showed high stability and excellent enantioseparation effects in capillary electrochromatography (CEC).     

Preparation of a weak anion exchange/hydrophobic interaction dual‐function mixed‐mode chromatography stationary phase for protein separation using click chemistry

In this study, 3‐diethylamino‐1‐propyne was covalently bonded to the azide‐silica by a click reaction to obtain a novel dual‐function mixed‐mode chromatography stationary phase for protein separation with a ligand containing tertiary amine and two ethyl groups capable of electrostatic and hydrophobic interaction functionalities, which can display hydrophobic interaction chromatography character in a high‐salt‐concentration mobile phase and weak anion exchange character in a low‐salt‐concentration mobile phase employed for protein separation. As a result, it can be employed to separate proteins with weak anion exchange and hydrophobic interaction modes, respectively. The resolution and selectivity of the stationary phase were evaluated in both hydrophobic interaction and ion exchange modes with standard proteins, respectively, which can be comparable to that of conventional weak anion exchange and hydrophobic interaction chromatography columns. Therefore, the synthesized weak anion exchange/hydrophobic interaction dual‐function mixed‐mode chromatography column can be used to replace two corresponding conventional weak anion exchange and hydrophobic interaction chromatography columns to separate proteins. Based on this mixed‐mode chromatography stationary phase, a new off‐line two‐dimensional liquid chromatography technology using only a single dual‐function mixed‐mode chromatography column was developed. Nine kinds of tested proteins can be separated completely using the developed method within 2.0 h.     

Synthesis, crystal structures and properties of three new mixed-ligand d metal complexes constructed from pyridinecarboxylate and in situ generated amino-tetrazole ligand

Three new metal-organic frameworks, [Zn(atz)(nic)]_n(1), [Zn(atz)(isonic)]_n·nHisonic(2) and [Cd(atz)(isonic)]_n(3) (Hnic=nicotinic acid, Hisonic=isonicotinic acid), have been firstly synthesized by employing mixed-ligand of pyridinecarboxylate with the in situ generated ligand of 5-amino-tetrazolate(atz⁻), and characterized by elemental analysis, IR spectroscopy, TGA and single crystal X-ray diffraction. The results revealed that 1 presents a two-dimensional (2D) “sql” topological network constructed from the linear chain subunit of Zn(nic)₂ and atz⁻ ligand. A remarkable feature of 2 is a 2-fold interpenetrated diamondoid network with free Hisonic molecules locating in the channels formed by the zigzag chain subunits of Zn(isonic)₂. Complex 3 is a 3D non-interpenetrated pillared framework constructed from the double chain subunits of Cd-COO⁻-Cd. It possesses a rarely observed (4,6)-connected “fsc” topology. The thermal stabilities and fluorescent properties of the complexes were investigated. All of these complexes exhibited intense fluorescent emissions in the solid state at room temperature.     

Hydrothermal chemistry of Th(IV) with aromatic dicarboxylates: New framework compounds and in situ ligand syntheses

A novel thorium (IV) coordination polymer, Th(C₅H₂N₂O₄)₂(H₂O)₂ (1), has been prepared under the hydrothermal reaction of thorium nitrate tetrahydrate and 3,5-pyrazoledicarboxylic acid (H₃pdc). Compound 1 (orthorhombic, P2₁2₁2₁, a=6.9362(5) Å, b=10.7806(8) Å, c=17.9915(14) Å, Z=2, R₁=0.0210, wR₂=0.0470) consists of thorium metal centers connected via H₃pdc linkages to form an overall three-dimensional structure containing π-π interactions between the pyrazole rings. 2,3-Pyrazinedicarboxylic acid (H₂pzdc) was explored as well to (1) study the effect of the location of the carboxylic groups around the aromatic ring and (2) produce heterometallic compounds. Thorium (IV) and copper (II) were combined with H₂pzdc, resulting in an interesting decomposition reaction characterized though the isolation of Th(C₂O₄)₂(H₂O)₂·2H₂O (2) (monoclinic, C2/c, a=13.8507(12) Å, b=7.8719(7) Å, c=10.7961(16) Å, β=118.0310(10)°, Z=2, R₁=0.0160, wR₂=0.0349), Cu(C₆H₂N₂O₄) (3) (monoclinic, C2/c, a=11.499(3) Å, b=7.502(2) Å, c=7.402(2) Å, β=93.892(5)°, Z=4, R₁=0.0472, wR₂=0.0745) and Cu(C₅H₃N₂O₂)(NO₃)(H₂O) (4). The capture of these species provides mechanistic evidence for the formation of the oxalate anions observed in 2 via the decarboxylation of H₂pzdc to yield the linker in 4: 2-pyrazinecarboxylate anions.     

Synthesis and structural characterization of three copper coordination polymers with pyridine derivatives from hydro(solvo)thermal in situ decarboxylation reactions of 2,5-dicarboxylpyridine

The hydro(solvo)thermal self-assembles of CuI, KI and 2,5-dicarboxylpyridine [2,5-(COOH)₂py] in different molar ratios in H₂O/alcohol solutions produced three Cu coordination polymers as 2-D [N-C₂H₅py][Cu₃I₄] 1, 1-D [N-CH₃py][Cu₂I₃] 2 as well as 1-D [Cu(2-COOpy)₂]H₂O 3 (N-C₂H₅py=N-ethylpyridine, N-CH₃py=N-methylpyridine, 2-COOpy=2-carboxylpyridine). N-C₂H₅py in 1 and N-CH₃py in 2 derived from the solvothermal in situ simultaneous decarboxylation and N-alkylation reactions of 2,5-(COOH)₂py. The semi-decarboxylation reaction of 2,5-(COOH)₂py into 2-COOpy occurred in the preparation of 3. X-ray single-crystal analysis revealed that CuI is transformed into a 2-D [Cu₃I₄]⁻ layer in compound 1 and a 1-D chain in compound 2, templated by [N-C₂H₅py]⁺ and [N-CH₃py]⁺, respectively. Compound 3 is a divalent Cu compound. The Cu(II) centers with a 4+2 geometry are coordinated by μ₃-mode 2-COOpy ligands. All of the title compounds were characterized by CHN analysis, IR spectrum analysis and TG analysis. Compounds 1 and 2 exhibit fluorescence properties with the maximum emissions at 581 nm for 1 and 537 nm for 2.     

Thermo-Raman spectroscopy in situ monitoring study of solid-state synthesis of NiO-Al2O3 nanoparticles and its characterization

Hyphenation of thermogravimetric analyzer (TGA) and thermo-Raman spectrophotometer for in situ monitoring of solid-state reaction in oxygen atmosphere forming NiO-Al₂O₃ catalyst nanoparticles is investigated. In situ thermo-Raman spectra in the range from 200 to 1400 cm⁻¹ were recorded at every degree interval from 25 to 800 °C. Thermo-Raman spectroscopic studies reveal that, although the onset of formation is around 600 °C, the bulk NiAl₂O₄ forms at temperatures above 800 °C. The X-ray diffraction (XRD) spectra and the scanning electron microscopy (SEM) images of the reaction mixtures were recorded at regular temperature intervals of 100 °C, in the temperature range from 400 to 1000 °C, which could provide information on structural and morphological evolution of NiO-Al₂O₃. Slow controlled heating of the sample enabled better control over morphology and particle size distribution (∼20-30 nm diameter). The observed results were supported by complementary characterizations using TGA, XRD, SEM, transmission electron microscopy, and energy dispersive X-ray analysis.     

大黄素键合硅胶固定相的制备及其在核苷碱基药物分离中的研究

通过γ-[(2,3)-环氧丙氧]丙基三甲氧基硅烷(KH-560)偶联剂将具有抗菌功能的植物有效成分大黄素键合到硅胶上,制备了大黄素液相色谱键合固定相(EDSP)。采用元素分析、红外光谱和热分析对该固定相的结构进行表征。以嘧啶、嘌呤和核苷为溶质探针,并用ODS柱做参比,对固定相的色谱性能及保留机理进行了研究。研究结果表明,该固定相具有类似ODS的反相色谱性能,除疏水作用外,由于大黄素的大π共轭体系,为溶质提供了n-π和π-π作用位点;且两个邻位羟基和两个羰基的存在,能够与溶质之间发生氢键作用和偶极-偶极作用。与ODS柱相比,该固定相在极性化合物分离中占优势,且分析速度较快。此外,实验还发现,该固定相能较好地分离二甲苯同分异构体,预示着该固定相有一定的立体选择性分离能力。     

A facile and efficient one‐step strategy for the preparation of β‐cyclodextrin monoliths

A novel, facile, and efficient one‐step copolymerization strategy was developed for the preparation of β‐cyclodextrin (β‐CD) methacrylate monolithic columns using click chemistry. The novel mono‐(1H‐1,2,3‐triazol‐4‐ylmethyl)‐2‐methylacryl‐β‐CD monomer was synthesized by a click reaction between propargyl methacrylate and mono‐6‐azido‐β‐CD, and then monolithic columns were prepared through a one‐step in situ copolymerization of the mono‐(1H‐1,2,3‐triazol‐4‐ylmethyl)‐2‐methylacryl‐β‐CD monomer and ethylene dimethacrylate. The physicochemical properties and column performance of the fabricated monolithic columns were characterized by elemental analysis, SEM, and micro‐HPLC. Satisfactory column permeability, efficiency, and separation performance were obtained for the optimized poly(mono‐(1H‐1,2,3‐triazol‐4‐ylmethyl)‐2‐methylacryl‐β‐CD‐co‐ethylene dimethacrylate) monolithic columns. Additionally, typical hydrophilic interaction chromatography retention behavior was observed on the monoliths at high acetonitrile content in the mobile phase. Although the enantioselectivity of our monolithic columns did not meet the level of other reported β‐CD monolithic columns, this one‐step strategy based on click chemistry still provides an interesting and effective model as it offers the possibility to easily prepare related novel CD methacrylate monoliths through a one‐step copolymerization strategy.     

Synthesis of a stationary phase based on silica modified with branched octadecyl groups by Michael addition and photoinduced thiol–yne click chemistry for the separation of basic compounds

A novel silica‐based stationary phase with branched octadecyl groups was prepared by the sequential employment of the Michael addition reaction and photoinduced thiol–yne click chemistry with 3‐aminopropyl‐functionalized silica microspheres as the initial material. The resulting stationary phase denoted as SiO₂‐N(C18)₄ was characterized by elemental analysis, FTIR spectroscopy and Raman spectroscopy, demonstrating the existence of branched octadecyl groups in silica microspheres. The separations of benzene homologous compounds, acid compounds and amine analogues were conducted, demonstrating mixed‐mode separation mechanism on SiO₂‐N(C18)₄. Baseline separation of basic drugs mixture was acquired with the mobile phase of acetonitrile/H₂O (5%, v/v). SiO₂‐N(C18)₄ was further applied to separate Corydalis yanhusuo Wang water extracts, and more baseline separation peaks were obtained for SiO₂‐N(C18)₄ than those on Atlantis dC18 column. It can be expected that this new silica‐based stationary phase will exhibit great potential in the analysis of basic compounds.     

Feasibility of using in situ fusion for the determination of Co,Cr and Mn in Portland cement by direct solid sampling graphite furnace atomic absorption spectrometry

In situ fusion on the boat-type graphite platform has been used as a sample pretreatment for the direct determination of Co, Cr and Mn in Portland cement by solid sampling graphite furnace atomic absorption spectrometry (SS-GF AAS). The 3-field Zeeman technique was adopted for background correction to decrease the sensitivity during measurements. This strategy allowed working with up to 200 µg of sample. The in situ fusion was accomplished using 10 µL of a flux mixture 4.0% m/v Na₂CO₃ + 4.0% m/v ZnO + 0.1% m/v Triton® X-100 added over the cement sample and heated at 800 °C for 20 s. The resulting mould was completely dissolved with 10 µL of 0.1% m/v HNO₃. Limits of detection were 0.11 µg g^− 1 for Co, 1.1 µg g^− 1 for Cr and 1.9 µg g^− 1 for Mn. The accuracy of the proposed method has been evaluated by the analysis of certified reference materials. The values found presented no statistically significant differences compared to the certified values (Student's t-test, p < 0.05). In general, the relative standard deviation was lower than 12% (n = 5).     

Exploiting in situ hydride trapping in tungsten coil atomizer for Se and As determination in biological and water samples

A flow injection hydride manifold was coupled to a 150 W tungsten coil electrothermal atomizer for in situ hydride collection followed by selenium and arsenic determination by ET AAS. Rhodium (200 μg), thermally reduced over the double layer tungsten atomizer, was very efficient at collecting selenium or arsenic hydrides. Prior to analysis, biological samples were digested in closed-vessels microwave digestion system. Prior to the hydride formation, both selenium and arsenic were reduced to valence state (IV) and (III), respectively. The detection limit was 35 ng L⁻¹ for selenium and 110 ng L⁻¹ for arsenic. Sample throughput was 70 h⁻¹ using 30 s of hydride trapping time. Method accuracy was evaluated by analyzing biological-certified reference materials from the National Institute of Standard and Technology (SRM-1577a and SRM-1577b “bovine liver” and RM-8414 “bovine muscle powder”) and from the International Agency for Energy Atomic (A-13 “animal blood”) and one water-certified reference material from the National Institute of Standard and Technology (SRM-1640 trace elements in natural water). By applying a t-test, there was no significant difference at the 95% probability level between the results obtained with the proposed method and those certified values.     

An advanced multivariate approach for processing X-ray fluorescence spectral and hyperspectral data from non-invasive in situ analyses on painted surfaces

In the last decades, in situ non-invasive analytical techniques have been widely used for the analysis of paintings. These techniques are useful to extensively map the surface in a non-invasive way, in order to identify the most representative areas to be sampled. When spectroscopic investigations, such as X ray fluorescence (XRF), are conducted, they usually imply the acquisition of a huge amount of measurements. Subsequently, all these data should be processed in situ, in order to immediately support the sampling strategies. To this aim, an appropriate and fast strategy for multivariate treatment of XRF spectral and hyperspectral data sets is presented, able to account for inter-correlation among variables, which is an issue of high importance for elemental analyses. The main advantage of the approach is that XRF spectral profiles are analysed directly, without computation of derived parameters, by means of principal component analysis (PCA). This procedure allows a fast interpretation of results that can be accomplished in situ. Particular attention was paid to the selection of proper spectral pre-treatments to be applied on data together with the use of several chemometric tools (peak alignment, spectra normalisation and exploratory analysis) aimed at improving the interpretation of XRF results. In addition, the application of multivariate exploratory analysis on XRF hyperspectral maps was studied by using an interactive brushing procedure. The multivariate approach was validated on data obtained from the analysis of the famous Renaissance panel painting “The Ideal City”, exhibited in Palazzo Ducale of Urbino, Italy.     

In situ emulsification microextraction using a dicationic ionic liquid followed by magnetic assisted physisorption for determination of lead prior to micro-sampling flame atomic absorption spectrometry

For the first time, a simple and efficient in situ emulsification microextraction method using a dicationic ionic liquid followed by magnetic assisted physisorption was presented to determine trace amounts of lead. In this method, 400 μL of 1.0 mol L⁻¹ lithium bis (trifluoromethylsulfonyl) imide aqueous solution, Li[NTf₂], was added into the sample solution containing 100 μL of 1.0 mol L⁻¹ 1,3-(propyl-1,3-diyl) bis (3-methylimidazolium) chloride, [pbmim]Cl₂, to form a water immiscible ionic liquid, [pbmim][NTf₂]₂. This new in situ formed dicationic ionic liquid was applied as the acceptor phase to extract the lead-ammonium pyrrolidinedithiocarbamate (Pb-APDC) complexes from the sample solution. Subsequently, 30 mg of Fe₃O₄ magnetic nanoparticles (MNPs) were added into the sample solution to collect the fine droplets of [pbmim][NTf₂]₂, physisorptively. Finally, MNPs were eluted by acetonitrile, separated by an external magnetic field and the obtained eluent was subjected to micro-sampling flame atomic absorption spectrometry (FAAS) for further analysis. Comparing with other microextraction methods, no special devices and centrifugation step are required. Parameters influencing the extraction efficiency such as extraction time, pH, concentration of chelating agent, amount of MNPs and coexisting interferences were studied. Under the optimized conditions, this method showed high extraction recovery of 93% with low LOD of 0.7 μg L⁻¹. Good linearity was obtained in the range of 2.5–150 μg L⁻¹ with determination coefficient (r²) of 0.9921. Relative standard deviation (RSD%) for seven repeated measurements at the concentration of 10 μg L⁻¹ was 4.1%. Finally, this method was successfully applied for determination of lead in some water and plant samples.     

Carbon nanoparticles from corn stalk soot and its novel application as stationary phase of hydrophilic interaction chromatography and per aqueous liquid chromatography

Carbon nanoparticles (CNPs) (6–18 nm in size) were prepared by refluxing corn stalk soot in nitric acid. The obtained acid-oxidized CNPs are soluble in water due to the existence of carboxylic and hydroxyl groups. ¹³C NMR measurement shows the CNPs are mainly of sp² and sp³ carbon structure different from CNPs obtained from candle soot and natural gas soot. Furthermore, these CNPs exhibit unique photoluminescence properties. Interestingly, the CNPs might be exploited to immobilize on the surface of porous silica particles as chromatographic stationary phase. The resultant packing material was evaluated by high-performance liquid chromatography, indicating that the new stationary phase could be used in hydrophilic interaction liquid chromatography (HILIC) and per aqueous liquid chromatography (PALC) modes. The separation of five nucleosides, four sulfa compounds and safflower injection was achieved by using the new column in the HILIC and PALC modes, respectively.     

Determination of daphnetin in Daphne tangutica and its medicinal preparation by liquid chromatography

A liquid chromatographic (LC) technique coupled with photodiode array (PDA) detection was developed for determining daphnetin in extracts of Daphne tangutica and its medicinal preparation. The optimized method was achieved for the separation and detection of selected constituent using methanol-0.5% phosphonic acid as the mobile phase at a flow rate of 0.8 mL min⁻¹, and 325 nm as the detection wavelength. Daphnetin showed good linearity in a relatively wide concentration range (r > 0.999). Intra- and inter-assay accuracy and precision were all lower than 5.0%. Sample extracting and purifying procedures were intensively explored. The recovery of the method was 94.8%-105.0% with a relative standard deviation (R.S.D.) of 4.0%. The concentration of daphnetin in D. tangutica from different locations and in its medicinal preparation manufactured by different factories was quite different. The current method may serve as a valuable tool for quality control of D. tangutica and its preparation.     

A simple and sensitive HPLC method for the simultaneous determination of eight bioactive components and fingerprint analysis of Schisandra sphenanthera

A simple and sensitive high performance liquid chromatography method with photodiode array detection (HPLC-DAD) was developed for simultaneous determination of eight bioactive constituents (schisandrin, schisandrol B, schisantherin A, schisanhenol, anwulignan, deoxyshisandrin, schisandrin B and schisandrin C) in the ripe fruit of Schisandra sphenanthera and its traditional Chinese herbal preparations Wuzhi-capsule by optimizing the extraction, separation and analytical conditions of HPLC-DAD. The chemical fingerprint of S. sphenanthera was established using raw materials of 15 different origins in China. The chromatographic separations were obtained by an Agilent Eclipse XDB-C18 reserved-phase column (250 mm × 4.6 mm i.d., 5 μm) using gradient elution with water-formic acid (100:0.1, v/v) and acetonitrile, at a flow rate of 1.0 mL min⁻¹, an operating temperature of 35 °C, and a wavelength of 230 nm. The constituents were confirmed by (+) electrospray ionization LC-MS. The new method was validated and was successfully applied to simultaneous determination of components in 13 batches of Wuzhi-capsule. The results indicate that this multi-component determination method in combination with chromatographic fingerprint analysis is suitable for quantitative analysis and quality control of S. sphenanthera.     

Synthesis of (S)-naproxen-benzotriazole and its application as chiral derivatizing reagent for microwave-assisted synthesis and indirect high performance liquid chromatographic separation of diastereomers of penicillamine, cysteine and homocysteine

(S)-Naproxen-benzotriazole was synthesized by the reaction of (S)-naproxen with 1H-benzotriazole using coupling reagent dicyclohexyl carbodiimide and 4-dimethylamino pyridine (DCC/DMAP). It was used as chiral derivatizing reagent for microwave irradiated synthesis of diastereomers of penicillamine, cysteine and homocysteine. The diastereomers were separated by reversed phase high performance liquid chromatography using gradient elution of triethylammonium phosphate (pH 3.5)-acetonitrile (30-65% within 30 min). The method was validated for accuracy, precision, and limit of detection.