Synchronous fluorescence determination of DNA based on the interaction between methylene blue and DNA

The fluorescence intensity of methylene blue (MB) quenched by DNA in the pH range of 6.5-8.0 was studied with synchronous fluorescence technology. A novel method for detecting single-stranded and double-stranded DNA was developed. The decreased fluorescence intensity at 664 nm is in proportion to the concentration of DNA in the range of 0.28-11.0 μmol L⁻¹ for ctDNA, 0.14-8.25 μmol L⁻¹ for thermally denatured ctDNA and 0.28-8.25 μmol L⁻¹ for hsDNA. The detection limits (S/N = 3) are 0.11, 0.04 and 0.04 μmol L⁻¹, respectively. The method is rapid, selective, and the reagents are lower toxic. It has been used for the determination of DNA in synthetic samples with good satisfaction. In addition, the interaction modes between MB and ctDNA and the mechanism of the fluorescence quenching were also discussed in detail. The experimental results from absorption spectra and fluorescence polarization indicate that the possible interaction modes between MB and DNA are the electrostatic binding and the intercalation binding.     

Determination and on-line clean-up of (fluoro)quinolones in bovine milk using column-switching liquid chromatography fluorescence detection

A simple, cost-effective, and high throughput method using on-line column-switching liquid chromatography fluorescence detection was developed and validated for analysing five (fluoro)quinolones (FQs)--enrofloxacin (ENRO), ciprofloxacin (CIPR), sarafloxacin (SARA), oxolinic acid (OXOL), and flumequine (FLUM) in bovine milk. Norfloxacin (NORF) and nalixidic acid (NALI) were used as internal standards. After simple deproteination of milk sample with 5% (w/v) metaphosphoric acid, the supernatant was subject to on-line column clean-up and direct analysis by LC-FLD. The extraction cartridge was prepared in-house by slurry packing with hydrophilic-lipophilic polymer sorbent. The accuracy of measurement for each (fluoro)quinolone at different maximum residue limits (MRL) was 101-103% (ENRO), 92.8-97.4% (CIPR), 89.8-92.8% (SARA), 116-121% (OXOL), and 81.3-85.5% (FLUM), whilst the precision was 2.9-6.1% (ENRO), 2.5-5.1% (CIPR), 2.3-5.0% (SARA), 3.1-5.9% (OXOL), and 5.6-6.5% (FLUM). The decision limits, detection capabilities, specificity and analytes stability during storage were also investigated.     

Study of the interaction between terazosin and serum albumin: Synchronous fluorescence determination of terazosin

The interactions between terazosin and bovine serum albumin (BSA) were studied by spectrofluorimetry. The binding constants of terazosin with BSA were measured at different temperatures. The effects of various metal ions on the binding constants of terazosin with BSA were also studied. The optimum conditions of synchronous fluorometric determination of terazosin were studied and the method was successfully applied to the determination of terazosin added to serum and urine samples (3σ detection limit 0.21 mg l⁻¹).     

Development and application of a capillary electrophoresis-electrochemiluminescent method for the analysis of enrofloxacin and its metabolite ciprofloxacin in milk

Enrofloxacin (ENR) is a fluoroquinolone developed exclusively for the use in veterinary practice for the treatment of respiratory and gastrointestinal infections, and ciprofloxacin (CIP) is its main active metabolite. Their contents are regulated by the EU Council Regulation no. 2377/90 in animal edible tissues. We developed a sensitive and rapid method for the determination of ENR and CIP by capillary electrophoresis (CE) with electrochemiluminescence (ECL) detection. The method is based on the detection of aliphatic tertiary or secondary amino moieties in ENR and CIP with end-column tris(2,2-bipyridyl)ruthenium(II) electrochemiluminescence. Parameters that affect separation and detection were optimized. Under the optimized conditions, the calibration functions were linear in the range of 0.03–1 μg ml⁻¹ for ENR and 0.05–1.2 μg ml⁻¹ for CIP. The detection limits of ENR and CIR were 10 ng ml⁻¹ and 15 ng ml⁻¹, respectively, based on the signal-to-noise ratio of 3. The relative standard derivations of the peak height and the migration time for ENR and CIP were less than 4.13%. The developed method was successfully applied to determine ENR and CIP in milk with a solid-phase extraction procedure.     

Ultrasensitive determination of silver ion based on synchronous fluorescence spectroscopy with nanoparticles

Based on the characteristics of synchronous fluorescence spectroscopy (SFS), a new method with high sensitivity and selectivity was developed for rapid determination of silver ion with functional cadmium sulphide (CdS) nanoparticles as a fluorescence probe. When Δλ (λ_em − λ_ex) = 215 nm, maximum synchronous fluorescence is produced at 304 nm. Under optimal conditions, functional cadmium sulphide displayed a calibration response for silver ion over a wide concentration range from 0.8 × 10⁻¹⁰ to 1.5 × 10⁻⁸ mol L⁻¹. The limit of detection was 0.4 × 10⁻¹⁰ mol L⁻¹ and the relative standard deviation of seven replicate measurements for the lowest concentration (0.8 × 10⁻¹⁰ mol L⁻¹) was 2.8%. Compared with several fluorescence methods, the proposed method had a wider linear range and improved the sensitivity. Furthermore, the concentration dependence of the synchronous fluorescence intensity is effectively described by a Langmuir-type binding isotherm.     

The luminescence system of yttrium(III)-BPMPHD-CTMAB and the determination of yttrium(III)

The study indicated that yttrium(III) could form an ion association compound with a new synthetic reagent, 1,6-bi(1′-phenyl-3′-methyl-5′-pyrazolone-4′-)hexanedione (BPMPHD) and cetyl trimethyl ammonium bromide (CTMAB). The compound could enhance the natural fluorescence of BPMPHD by about 260 times, upon which a new fluorescence method was developed for determining yttrium in rare earth (RE) samples. The determination range was 9–900 ng/ml. The detection limit was 1.8 ng/ml. The composition of the ion association was [Y(BPMHD)₂]⁻CTMAB⁺.     

Single‐step extraction followed by LC for determination of (fluoro)quinolone drug residues in muscle,eggs, and milk

In this study, a simplified method for the extraction and determination of seven fluoroquinolone residues (danofloxacin, difloxacin, enrofloxacin, marbofloxacin, orbifloxacin, ofloxacin, and sarafloxacin) and three quinolones (oxolinic acid, flumequine, and nalidixic acid), in porcine muscle, table eggs, and commercial whole milk, which required no cleanup step, was devised. This procedure involves the extraction of analytes from the samples via liquid‐phase extraction, and the subsequent quantitative determination was accomplished via LC‐fluorescence detection. Analyte separation was successfully conducted on an XBridge‐C₁₈ column, with a linear gradient mobile phase composed of acetonitrile and 0.01 M oxalic acid buffer at pH=3.5. The one‐step liquid‐liquid extraction method evidenced good selectivity, precision (RSDs=0.26–15.07%), and recovery of the extractable analytes, ranging from 61.12 to 115.93% in matrices. The LOQs ranged from 0.3 to 25 μg/kg. A survey of ten samples purchased from local markets was conducted, and none of the samples harbored fluoroquinolone residues. This method is an improvement over existing methodologies, since no additional cleanup was necessary.     

Synchronous fluorescence for simultaneous determination of hydroquinone and resorcinol in air samples

Several phenolic compounds are present in tobacco smoke. They are formed from the pyrolysis of tobacco during the smoking process and all of them are toxic. Therefore, the determination of these compounds in air samples is important. A rapid, simple, and sensitive method using a synchronous spectrofluorimetry technique was developed to quantify hydroquinone and resorcinol simultaneously. One of the advantages of this method is the simple and rapid sampling technique, which uses water as the absorption solution of the analytes in the air sample. The precision of the method (%RSD) was 1.8% and the detection limits were 0.125 mg m^–3 and 0.292 mg m^–3 for hydroquinone and resorcinol, respectively.     

Classification of edible and lampante virgin olive oil based on synchronous fluorescence and total luminescence spectroscopy

Total luminescence and synchronous fluorescence spectroscopies were tested as regards their ability to differentiate edible from lampante virgin olive oils. Total luminescence spectra were recorded by measuring the emission spectra in the range 350-720 nm at excitation wavelengths from 320 to 535 nm. The synchronous fluorescence spectra of 41 edible and 32 lampante virgin olive oils were acquired by synchronous scanning the excitation and emission monochromator maintained at an offset value of 80 nm. Classification of virgin olive oils based on their synchronous fluorescence spectra was performed by hierarchical cluster analysis and principal component analysis using the spectral range of 429-545 nm. Principal component analysis provided better discrimination between the two classes, without any classification error, while hierarchical cluster analysis allowed 97.3% correct classification. These results indicate the capability of fluorescence techniques to differentiate virgin olive oils according to their quality.     

A liquid chromatographic method, with fluorometric detection, for the determination of enrofloxacin and ciprofloxacin in plasma and endometrial tissue of mares

The aim of this work was to develop and validate a simple and sensitive analytical method for determining enrofloxacin (EFX) and ciprofloxacin (CFX) in equine plasma and endometrial tissue samples, as a precursor to conducting pharmacokinetic/pharmacodynamic studies on equine endometritis This was achieved in the form of a liquid chromatographic procedure, with fluorometric detection, which also gave good separation of other fluoroquinolones including marbofloxacin (MFX), danofloxacin (DFX) and ofloxacin (OFX). Analytes were separated on a C₁₈ reversed phase column using an acidified mobile phase. The exact composition of the mobile phase differed for plasma (16% acetonitrile:methanol [13:1,v/v] 84% water containing 0.4% triethylamine and 0.4% phosphoric acid [35%]) and endometrial tissue (14% acetonitrile, 86% water, without methanol) samples. EFX and CFX were both detected at excitation and emission wavelengths of 294 and 500 nm, respectively. Prior to chromatography, EFX and CFX were purified by solid phase extraction from plasma, and a combination of solvent/solid phase extraction from endometrial tissue.

Mean absolute recoveries for EFX and CFX from plasma were 94.1 and 78.0%, respectively, and from endometrial tissue, 78.0 and 57.8%, respectively, with a percentage residual standard deviation (%R.S.D.) <10% in each case. Mean relative recoveries for EFX and CFX from plasma were 91.3 and 119.4%, respectively, and from endometrial tissue, 80.2 and 108.0%, respectively, with a %R.S.D. <20% in each case.

Standard curves constructed using blank plasma and endometrial tissue samples, spiked with authentic EFX and CFX in the ranges 0.005–10.0 μg mL⁻¹ and 0.05–10.0 μg g⁻¹, respectively, all showed acceptable linearity with correlation coefficients, r² ≥ 0.977. Mean intra- and inter-day precision (expressed as %R.S.D.) was <6 and <13%, respectively, with an associated accuracy (expressed as percentage relative error, %R.E.) of <20% for both analytes in both matrices. Acceptable precision and accuracy was also demonstrated at the pre-assigned LOQs of 0.005 μg mL⁻¹ for both EFX and CFX in plasma, and 0.05 μg g⁻¹ for both drugs in endometrial tissue. EFX and CFX were stable in both plasma and endometrial tissue for at least 60 days at −20 °C.     

Easy sample treatment for the determination of enrofloxacin and ciprofloxacin residues in raw bovine milk by capillary electrophoresis

An easy, selective, and sensitive method has been developed for the determination of enrofloxacin (ENR) and its main active metabolite, ciprofloxacin (CIP), in raw bovine milk using CE with UV detection at 268 nm. Milk samples were prepared by a clean‐up/extraction procedure based on protein precipitation with hydrochloride acid followed by being defatted by centrifugation and SPE using a hydrophilic‐lipophilic balance cartridge. Optimum separation was obtained using a 50 mM phosphoric acid at pH 8.4 and the total electrophoretic run time was 6 min. Sample preparation by this method yielded clean extracts with quantitative and consistent mean recoveries from 89 to 97% for CIP and from 93 to 98% for ENR. LODs obtained were lower to the maximum residue limits for these fluoroquinolones. The precision of the ensuing method is acceptable; thus, the RSD for peak area and migration time was less than 8.5 and 0.5% for CIP and 9.9 and 0.9% for ENR, respectively. The results showed that the proposed method was efficient showing good recoveries, sensitivity, and precision for the studied compounds and could be satisfactorily applied in routine analysis for the monitoring of ENR and CIP residues in milk, due to its ruggedness and feasibility demonstrated.     

Comparison of synchronous and laser-induced fluorescence spectroscopy applied to the Eu(III)-fulvate complexation

The complexation of europium ion (Eu(III)) with a soil fulvic acid (FA) has been studied at pH 5 in 0.01 M NaClO₄ by different experimental methods, i.e. synchronous fluorescence spectroscopy (SyFS) and time resolved laser-induced fluorescence spectroscopy (TRLFS). A series of SyFS quenching spectra was obtained by increasing the Eu(III) concentration and keeping the FA concentration constant. The emission spectra and fluorescence lifetimes of the Eu(III) bound to the FA were also measured by a TRLFS system using the same solution used in the SyFS spectral measurement. From the analysis of the fluorescence data obtained by the SyFS and the TRLFS using a non-linear least-squares method, the concentration of the binding sites (C_L) of the FA accessible for the Eu(III) and the corresponding conditional stability constants (log K) were estimated. The two different methods gave rise to constants being comparable with one another. The log K and C_L values (mean ± standard deviation of three determinations) determined by the SyFS were 6.4 ± 0.2 (6.7 ± 0.1 μmol L⁻¹: by the TRLFS) and 10 ± 1 μmol L⁻¹ (7 ± 1 μmol L⁻¹: by the TRLFS), respectively. The applicability of the FA fluorescence quenching techniques for estimating the europium binding parameters was proved by the direct monitoring of the Eu(III) bound to the FA using the TRLFS system.     

Synchronous fluorescence spectroscopy and gas chromatography to determine the effect of UV irradiation on crude oil

The fate of the crude oil under irradiation was studied. After the UV irradiation, the fraction present in the highest percentage shifted from C8–C9 fraction to C13 one, in GC–MS analysis. An increase of the relative amount of the C13–C25 fraction was observed, while a decrease in the relative amount of the C7–C12 fractions was present. The synchronous fluorescence spectrum showed a maximum at 396 nm. Two hours irradiation of the sample induced an increase of the fluorescence emission in the region 420–550 nm. After 20, 40, 60, and 100 h irradiation we observed a decrease of the fluorescence emission.     

荧光反猝灭法测定药剂中卡托普利

建立荧光反猝灭法测定卡托普利(CAT)的体系.碘(I-3)与罗丹明B(RhB)缔合作用使罗丹明B荧光信号强度减弱直至荧光猝灭,而卡托普利可将I-3还原为I-,使体系荧光信号再现.在2～20μmol·L-1范围内荧光强度再现值ΔF与卡托普利浓度有线性关系:ΔF=-8.438+10.774c(r=0.9986),检出限为3...     

Laser induced fluorescence coupled to capillary electrophoresis for the determination of fluoroquinolones in foods of animal origin using molecularly imprinted polymers

A method for the simultaneous determination of four fluoroquinolones of veterinary use (ciprofloxacin, danofloxacin, enrofloxacin and sarafloxacin) in two complex matrixes, such as bovine raw milk and pig kidney, has been established and validated. The method is based on the use of capillary electrophoresis (CE) coupled with a very sensitive detection mode, such as laser induced fluorescence (LIF) detection, due to the fact the all the compounds selected show native fluorescence. In order to achieve high selectivity in the sample treatment procedure, a commercially available molecularly imprinted polymer has been used for the solid phase extraction of the analytes. Once the retention and elution processes were optimized, the final extract was analyzed by CE-LIF using a 325 nm He–Cd laser. Optimum separation was obtained in a 70 cm × 75 μm capillary using a 125 mM phosphoric acid solution at pH 2.8 with 36% methanol as background electrolyte. The method provided very low detection limits, ranging from 0.17 to 0.98 μg/kg for milk and 1.10 to 10.5 μg/kg for kidney, with acceptable precision and satisfactory recoveries.     

探针5-硝基水杨酸同步荧光法测定生物样品中蛋白质的应用研究

在模拟人体生理条件下,基于5-硝基水杨酸与人血清白蛋白(HSA)相互作用生成复合物,导致血清白蛋白的内源荧光产生特异性变化,而建立了以5-硝基水杨酸为分子探针,用固定波长同步荧光光谱分析测定蛋白质的新方法。体系同步荧光光谱特征及强度受Δλ、反应介质、反应温度等因素的影响。对上述实验条件进行了优化,结果表明,在最佳实验条件下,体系的同步荧光强度(ISF)与人血清白蛋白在2.21 ~ 469.2 mg/L 的浓度范围内呈良好的线性关系,检测限为0.81 mg/L(n=11)。本实验对血清、尿样和唾液样品进行了测定,回收率在98.4% ~ 102.6 %之间。     

Synchronous determination of mercury (II) and copper (II) based on quantum dots-multilayer film

A sensitive sensor for mercury (II) and copper (II) synchronous detection was established via the changed photoluminescence of CdTe quantum dots (QDs) multilayer films in this work. QDs were deposited on the quartz slides to form QDs-multilayer films by electrostatic interactions with poly(dimethyldiallyl ammonium chloride) (PDDA). Hg²⁺ or Cu²⁺ could quench the photoluminescence of the QDs-multilayer films, and glutathione (GSH) was used to remove Hg²⁺ or Cu²⁺ from QDs-multilayer films due to strong affinity of GSH-metal ions, which resulted in the recovered photoluminescence of QDs-multilayer films. There are good linear relationships between the metal ions concentration and the photoluminescence intensity of QDs in the quenched and recovered process. It was found that the Stern–Volmer constants for Hg²⁺ are higher than that for Cu²⁺. Based on different quenching and recovery constant between Hg²⁺ and Cu²⁺, the synchronous detection of Hg²⁺ and Cu²⁺ can be achieved. The linear ranges of this assay were obtained from 0.005 to 0.5 μM for Hg²⁺ and from 0.01 to 1 μM for Cu²⁺, respectively. And the artificial water samples were determined by this method with satisfactory results, the recoveries for Hg²⁺ and Cu²⁺ ions were found in the range of 90.4–106.4%. To the best of our knowledge, it is the first report about the synchronous detection of Hg²⁺ and Cu²⁺ by using quenched and recovered photoluminescence of quantum dots multilayer films.     

基于荧光染料和氧化石墨烯同步荧光法同时检测多种流感病毒亚型

分别采用三种不同发射波长的荧光染料,通过共价偶联的方式分别标记三种流感病毒亚型H1N1、H5N1和H9N2的抗体,再利用氧化石墨烯猝灭所标记染料的荧光。当将荧光标记抗体和氧化石墨烯一并加入到流感病毒溶液中时,由于抗原和抗体之间的特异性相互作用,病毒会和抗体作用而使得氧化石墨烯远离荧光染料,染料的荧光得以恢复。通过恢复的荧光发射波长位置和荧光强度,可以定性和定量检测三种不同的流感病毒亚型。在最佳实验条件下,对三种流感病毒亚型H1N1、H5N1和H9N2进行同时检测,H1N1的检出限为0.48ng/mL,线性范围为1~18ng/mL;H5N1的检出限为0.46ng/mL,线性范围为1~18.5ng/mL;H9N2的检出限为0.42ng/mL,线性范围为1~16ng/mL。该方法具有较好的稳定性、重现性和灵敏度,可实现多个流感病毒亚型的分型和同时检测。     

Improvement of stability and luminescence properties in water of Eu(III) and Tb(III) complexes photosensitized by a bipyridine antenna

The convenient synthesis of a new macrocyclic octadentate chelate based on 2,2′-bipyridine chromophore and diethylenetriaminetriacetic acid core is described. In aqueous solutions, the corresponding Eu(III) and Tb(III) neutral complexes are kinetically inert and show very bright luminescence when excited with UV radiation (Φ=11 and 25% respectively). We also report the potentiality of these complexes to act as donors in delayed fluorescence resonance energy transfer (DEFRET).     

Determination of phenol, resorcinol and hydroquinone in air samples by synchronous fluorescence using partial least-squares (PLS)

The determination of phenolic compounds is of great importance owing to their high toxicity. Some of them are present in tobacco smoke and it is important for their monitoring in air of closed room. A simple, rapid and sensitive method was developed for simultaneous determination of hydroquinone, resorcinol and phenol in this kind of samples. Synchronous fluorescence technique was used and the data were processed by using the partial least-squares (PLS) chemometric algorithm. The concentrations for experimental calibration matrix were varied between 0.02 and 0.2 mg L⁻¹ for hydroquinone, between 0.05 and 0.6 mg L⁻¹ for resorcinol and between 0.05 and 0.4 mg L⁻¹ for phenol in accordance with the national legislation. The cross-validation method was used to select the number of factors. To check the accuracy of the proposed method a recovery study on real samples was carried out.