Multiway chemometric decomposition of EEM of fluorescence of CdTe quantum dots obtained as function of pH

The effect of the pH (from 3 to 10) on the excitation emission matrices (EEMs) of fluorescence of CdTe quantum dots (QDs), capped with mercaptopropionic acid (MPA), were analyzed by multiway decomposition methods of parallel factor analysis (PARAFAC), a variant of the parallel factor analysis method (PARAFAC2) and multivariate curve resolution alternating least squares (MCR-ALS). Three different sized CdTe QDs with emission maximum at 555 nm (QDa), 594 nm (QDb) and 628 nm (QDc) were selected for analysis. The three-way data structures composed of sets of EEMs obtained as function of the pH (EEMs, pH) do not have a trilinear structure. A marked deviation to the trilinearity is observed in the emission wavelength order—the emission spectra suffers wavelength shift as the pH is varied. The pH-induced variation of the fluorescence properties of QDs is described with only one-component PARAFAC2 or MCR-ALS models—other components are necessary to model scattering and/or other background signals in (EEMs, pH) data structures. Bigger sized QDs are more suitable tools for analytical methodologies because they show higher Stokes shifts (resulting in simpler models) and higher pH range sensitivity. The pH dependence of the maximum wavelength of the emission spectra is particularly suitable for the development of QDs/EEMs wavelength-encoded pH sensor bioimaging or biological label methodologies when coupled to multiway chemometric decomposition.     

Surface-modified CdSe quantum dots as luminescent probes for cyanide determination

Luminescent surface-modified CdSe semiconductor quantum dots (QDs), with nanoparticle (NP) size distribution in the order of 2-7 nm, have been synthesized for optical determination of cyanide ions. The nanoparticles have been functionalised with tert-butyl-N-(2-mercaptoethyl)-carbamate (BMC) groups and exhibit a strong fluorescent emission at about 580 nm with rather long fluorescence lifetimes (several hundred nanoseconds) in aerated methanolic solution. The observed luminescence emitted by the synthesized nanocrystals was tremendously increased by photo-activation under sunlight exposure. The functionalised QDs turned out to exhibit excellent long-term stability when stored in the dark (no significant changes in QDs luminescence emission intensity was observed even after two months from synthesis). The functionalisation of the NPs with carbamate ligand allowed a highly sensitive determination of free cyanide via analyte-induced changes in the photoluminescence (fluorescence quenching of intensity at 580 nm and lifetime changes) of the modified quantum dots (excited at 400 nm). A detection limit of 1.1 × 10⁻⁷ M (2.9 μg l⁻¹) of cyanide ions was obtained, while the interfering effect of other inorganic anions (including NO₃⁻, Cl⁻ or SCN⁻) was negligible even at 200-fold level concentrations in excess of cyanide.     

A potential visual fluorescence probe for ultratrace arsenic (III) detection by using glutathione-capped CdTe quantum dots

The interaction between mercaptoacetic acid (MA)-capped CdTe QDs, MA-capped CdTe/ZnS QDs or glutathione (GSH)-capped CdTe QDs with As(III) was studied using fluorescence spectrometry. As (III) has a high-affinity to reduced-GSH to form As(SG)₃, and the emission of the GSH-capped CdTe QDs (λ_em. = 612 nm) is quenched effectively. Thus, a novel fluorescence spectrometric method was developed for As (III) determination by using GSH-CdTe QDs. Under optimal conditions, the quenched fluorescence intensity (F₀/F) increased linearly with the concentration of As (III) ranging from 5.0 × 10⁻⁶ to 25 × 10⁻⁵ mol L⁻¹. The limit of detection (3σ) for As (III) was found to be 2 × 10⁻⁸ mol L⁻¹. This method is potentially useful in visual detection of As (III) under irradiation of the ultraviolet light.     

Ultrasensitive determination of 1,4-dihydroxybenzene based on fluorescence resonance energy quenching of luminescent quantum dots modified on surface of silica nanoparticles

An ultrasensitive solid-phase fluorescence resonance energy quenching (FREQ) method for determination of 1,4-dihydroxybenzene (DHB) using mercaptosuccinic acid (MSA)-capped CdTe quantum dots (QDs) immobilized on silica nanoparticles (NPs) as donors was developed. In the method, silica NPs were first modified with 3-aminopropyltriethoxysilane (APTS). Then, MSA-capped CdTe QDs were immobilized on the surface of the APTS-modified silica NPs. Finally, DHB in the solution was attached to the empty sites on the surface of silica NPs with QDs through electrostatic interaction. The fluorescence emission of the QDs was quenched by the proximal DHB molecules on the silica NPs. The quenching efficiency of the solid-phase FREQ method was 200-times higher than that of the solution-phase FREQ method. Using the ultrasensitive solid-phase FREQ method, DHB as low as 2.4 × 10⁻¹² mol/L could be detected. The method was applied to quantify trace DHB in water samples.     

水溶性CdTe量子点的合成及其用于荧光猝灭法测定肌红蛋白

以3-巯基丙酸为稳定剂,合成了具有特殊光学性质的水溶性CdTe量子点,其最大发射波长位于544 nm.利用荧光光谱、紫外可见光谱及圆二色光谱法系统的研究了CdTe量子点与肌红蛋白(Mb)二者结合前后体系光谱的变化,从而证实了CdTe量子点与Mb之间静电结合反应的特征.在pH 7.0的PBS缓冲液中,用CdTe量子点作为荧光探针研究了肌红蛋白与量子点的相互作用,并基于肌红蛋白对CdTe量子点有显著的荧光猝灭作用,建立了肌红蛋白的快速检测方法.在最佳实验条件下,该体系荧光强度的猝灭程度(△F)与肌红蛋白质量浓度呈良好的线性关系,线性范围为0.3～24 μg/mL,检出限为0.13 μg/mL.该方法已对合成样品中肌红蛋白进行检测,并用于人体尿样中肌红蛋白的测定.     

Thermodynamic and conformational investigation of the influence of CdTe QDs size on the toxic interaction with BSA

Water-soluble fluorescent colloidal quantum dots (QDs) have been widely used in some biological and biomedical fields, so the interaction of QDs with biomolecules recently attracts increasing attention. In this study, the fluorescence (FL) quenching method, circular dichroism (CD) technique, attenuated total reflection-Fourier transform infrared (ATR-FTIR) and UV-vis absorption spectra were used to investigate systematically the influence of CdTe QDs size on the toxic interaction with bovine serum albumin (BSA). Three size CdTe QDs with maximum emission of 543 nm (green-emitting QDs, GQDs), 579 nm (yellow-emitting QDs, YQDs) and 647 nm (red-emitting QDs, RQDs) were tested. The Stern-Volmer quenching constant (K_sv) at different temperatures, corresponding thermodynamic parameters (ΔH, ΔG and ΔS), and information of the structural features of BSA were gained. The FL results indicated that QDs can effectively quench the FL of BSA in a size-dependent manner, electrostatic interactions play a major role in the binding reaction, and the nature of quenching is static, resulting in forming QDs-BSA complexes. The CD and ATR-FTIR spectra showed that the secondary structure of BSA was changed by QDs, indicating the toxic on protein.     

Sized dependence and microstructural defects on highly photocatalytic activity based on multisized CdTe quantum dots sensitized TiO2

A series of sensitized TiO₂ NPs with enhanced photocatalytic activity were prepared by different sized CdTe QDs with bifunctional ligand interlinking. The microstructures and morphologies of four different sizes of CdTe QDs and CdTe QDs sensitized TiO₂ NPs were characterized systematically by fluorescence spectroscopy, UV-Vis diffuse reflectance spectroscopy, FT-IR, XRD, XPS, FE-SEM, HRTEM, BET, and positron annihilation lifetime spectroscopy (PALS). The photocatalytic performance of CdTe QDs sensitized TiO₂ NPs was investigated by degrading MO and MB in aqueous solution under visible light irradiation. The process of degradation complied with the first-order reaction kinetics. Four different sized CdTe QDs sensitized TiO₂ exhibited higher photocatalytic activities than TiO₂. Particularly, yellow emitting CdTe QDs (3.28 nm) sensitized TiO₂ (CT_1.5) showed the best photocatalytic performance, which may be attributed to the optimal NP size, and has a moderate light absorption and electron injection. The effect of microstructural defects on CdTe QDs sensitized TiO₂ has been confirmed effectively by positron lifetime measurements.     

One-pot synthesis of strongly luminesencing CdTe quantum dots and their conjugation with mouse antibody to alpha-fetoprotein

In this paper, strongly luminescent CdTe quantum dots (QDs) were synthesized in aqueous solution by a facile one-pot method. The CdTe QDs were synthesized in a weakly acidic or neutral buffer solution composed of sodium borate (Na₂B₄O₇) and sodium citrate (C₆H₅Na₃O₇). The pH of buffer solution and the ratio of the precursors were systematically optimized; the high-quality CdTe QDs with progressively increasing fluorescence during 60 days storage were obtained. As-prepared QDs can be conjugated with a mouse antibody alpha-fetoprotein via the reaction mediated by N-hydroxysuccinimide and 1-ethyl-3(3-dimethylaminopropyl) carbodiimide hydrochloride. The conjugate showed a red shift of 9 nm for the emission position.     

Electrogenerated chemiluminescence from thiol-capped CdTe quantum dots and its sensing application in aqueous solution

In this paper, the electrogenerated chemiluminescence (ECL) from thiol-capped CdTe quantum dots (QDs) was reported. The ECL emission was occurred at −1.1 V and reached a maximum value at −2.4 V when the potential was cycled between 0.0 and −2.5 V. The reduced species of CdTe QDs could react with the coreactants to produce the ECL emission. The CdTe QD concentration (6.64 × 10⁻⁷ mol L⁻¹) of ECL is lower than that (1.0 × 10⁻³ mol L⁻¹) of chemiluminescence (CL). Based on the enhancement of light emission from thiol-capped CdTe QDs by H₂O₂ in the negative electrode potential, a novel method for the determination of H₂O₂ was developed. The light intensity was linearly proportional to the concentration of H₂O₂ between 2.0 × 10⁻⁷ and 1.0 × 10⁻⁵ mol L⁻¹ with a detection limit of 6.0 × 10⁻⁸ mol L⁻¹. Compared with most of previous reports, the proposed method has higher sensitivity for the determination of H₂O₂. In addition, the ECL spectrum of thiol-capped CdTe QDs exhibited a peak at around 620 nm, which was substantially red shifted from the photoluminescence (PL) spectrum, suggesting the surface states play an important role in this ECL process.     

Preparation of strongly fluorescent silica nanoparticles of polyelectrolyte-protected cadmium telluride quantum dots and their application to cell toxicity and imaging

Based on the polyelectrolyte-protected CdTe quantum dots (QDs), which were prepared by self-assembling of QDs and poly-diallyldimethylammonium chloride (PDADMAC) in the help of electrostatic attraction, the strong fluorescence silica nanoparticles (QDs-PDADMAC@SiO₂) have been prepared via a water-in-oil reverse microemulsion method. Transmission electron microscopy and Zeta potential analysis were used to characterize the as-prepared nanoparticles. All of the particles were almost spherical and there is a uniform distribution of the particle size with the average diameter about 25 nm. There is a large Zeta potential of −35.07 mV which is necessary for good monodispersity of nanoparticles solution. As compared with the QDs coated by SiO₂ (QDs@SiO₂), the QDs-PDADMAC@SiO₂ nanoparticles have much stronger fluorescence, and their fluorescence stability could be obviously improved. Moreover, QDs-PDADMAC@SiO₂ exhibits good biological compatibility which promotes their application in cellular imaging.     

Ultrafast synthesis of near-infrared-emitting aqueous CdTe/CdS quantum dots with high fluorescence

The traditional aqueous route to synthesis CdTe/CdS Core/shell (c/s) quantum dots (QDs) via decomposition of Cd-thiol complexes is usually time consuming. Herein, an ultrafast and facile aqueous synthetic approach under atmospheric pressure for CdTe/CdS c/s QDs with emission from the green to the near-infrared window (535–820 nm) is reported. With purified CdTe core QDs diluted in solution of Cd-3-mercaptopropionic acid (MPA) complexes, CdTe/CdS c/s QDs with emission wavelengths at 700 and 800 nm can be obtained within 20- and 45-min refluxing under the optimized experimental conditions, respectively. This is the most rapid way to prepare CdTe/CdS c/s QDs in aqueous phase, and the obtained QDs were highly luminescent without postsynthesis treatment. The influences of various experimental factors, including Cd²⁺ concentration, MPA-to-Cd ratio, pH value, and dilution ratio on the growth rate and luminescent properties of the obtained CdTe/CdS c/s QDs, have been taken into consideration. The three processes “purification-dilution-addition” ensure the synthesis environment with high pH value and low core concentration and have a marked impact on the rapid synthesis rate and the resulting high fluorescence of CdTe/CdS c/s QDs.     

An ultrasensitive method for the determination of melamine using cadmium telluride quantum dots as fluorescence probes

An ultrasensitive and simple method for the determination of melamine was developed based on the fluorescence quenching of thioglycolic acid (TGA) capped CdTe quantum dots (QDs) at pH 11.0. In strong alkaline aqueous solution, the selectivity of the method has been greatly improved due to most heavy metal ions show no interference as they are in the precipitation form or in their anion form. Furthermore, CdTe quantum dots have higher quantum yields at higher pH. The method has a wider concentration range and lower detection limit. The influence factors on the determination of melamine were investigated and the optimum conditions were determined. Under optimum conditions, the fluorescence intensity change of TGA coated CdTe quantum dots was linearly proportional to melamine over a concentration range from 1.0 × 10⁻¹¹ to 1.0 × 10⁻⁵ mol L⁻¹ with a correlation coefficient of 0.9943 and a detection limit of 5 × 10⁻¹² mol L⁻¹. The mechanism of fluorescence quenching of the QDs has been proposed based on the infrared spectroscopy information and electrophoresis experiments in presence of melamine under alkaline condition. The proposed method was employed to detect trace melamine in milk powder and pet feeds with satisfactory results.     

Surface‐State‐Mediated Charge‐Transfer Dynamics in CdTe/CdSe Core–Shell Quantum Dots

Herein, we report the synthesis of aqueous CdTe/CdSe type‐II core–shell quantum dots (QDs) in which 3‐mercaptopropionic acid is used as the capping agent. The CdTe QDs and CdTe/CdSe core–shell QDs are characterized by X‐ray diffraction (XRD), high‐resolution transmission electron microscopy (HR‐TEM), steady‐state absorption, and emission spectroscopy. A red shift in the steady‐state absorption and emission bands is observed with increasing CdSe shell thickness over CdTe QDs. The XRD pattern indicates that the peaks are shifted to higher angles after growth of the CdSe shell on the CdTe QDs. HR‐TEM images of both CdTe and CdTe/CdSe QDs indicate that the particles are spherical, with a good shape homogeneity, and that the particle size increases by about 2 nm after shell formation. In the time‐resolved emission studies, we observe that the average emission lifetime (τ_av) increases to 23.5 ns for CdTe/CdSe (for the thickest shell) as compared to CdTe QDs (τ_av=12 ns). The twofold increment in the average emission lifetime indicates an efficient charge separation in type‐II CdTe/CdSe core–shell QDs. Transient absorption studies suggest that both the carrier cooling and the charge‐transfer dynamics are affected by the presence of traps in the CdTe QDs and CdTe/CdSe core–shell QDs. Carrier quenching experiments indicate that hole traps strongly affect the carrier cooling dynamics in CdTe/CdSe core–shell QDs.     

A high-precision ratiometric fluorosensor for pH: implementing time-dependent non-linear calibration protocols for drift compensation

We present a versatile time-dependent non-linear calibration protocol for optical sensors, implemented on the pH sensitive ratiometric fluorophore 8-hydroxypyrene-1,3,6-trisulfonic acid (HPTS) immobilized in ethyl-cellulose. The calibration protocol individually compensated for the progressive drift of calibration parameters, whereby sensor precision and accuracy, as well as applicable lifetime were improved. A severely reduced photoacidity was observed for the immobilized fluorophore, for which excited state dynamics was characterized and benefited from during measurements. Due to the significantly reduced photoacidity of HPTS immobilized in the ethyl-cellulose sensing membrane, a dual excitation/dual emission (F₁, ex/em: 405/440 nm and F₂, ex/em: 465/510 nm) ratiometric (RF₁,F₂ = F₁/F₂) sensing scheme could be used to amplify sensor response. The signal to noise (S/N) ratio was enhanced by ∼400% utilizing the dual excitation/dual emission ratiometric sensing scheme, rather than the more commonly used protocol of dual excitation/single emission for HPTS fluorescence. Apparent pK_a of the fluorophore ranged from 6.74 to 8.50, mainly determined by the immobilization procedure. The repeatability (IUPAC, pooled standard deviation) over three pH values (6.986, 7.702 and 7.828) was 0.0044 pH units for the optical sensor, compared to 0.0046 for the electrode used for standardization. Sensor analytical characteristics were thereby in principle limited by the performance of the standardization procedure.     

Functionalized cadmium sulfide quantum dots as fluorescence probe for silver ion determination

CdS quantum dots (QDs) modified with l-cysteine has been prepared by one step. They are water-soluble and biocompatible. To improve CdS QDs stability and interaction between silver ion and functionalized CdS QDs in aqueous solution, some amounts of fresh l-cysteine were added to functionalized CdS solution. Based on the characteristic fluorescence enhancement of CdS QDs at 545 nm by silver ions in the presence of some amounts of fresh l-cysteine, simultaneously, a gradual red shift of fluorescence emission bands of CdS QDs from 545 to 558 nm was observed. A simple, rapid, sensitive and specific detection method for silver ion was proposed. Under optimum conditions, the fluorescence intensity of CdS QDs is linearly proportional to silver concentration from 2.0 × 10⁻⁸ to 1.0 × 10⁻⁶ mol/L with a detection limit of 5.0 × 10⁻⁹ mol/L. In comparison with single organic fluorophores, functionalized CdS quantum dots are brighter, more stable against photobleaching, and don’t suffer from blinking. Furthermore, owing to the fluorescence enhancement effect of CdS QDs by silver ion, the proposed method showed lower detection blank and higher sensitivity. Possible fluorescence enhancement mechanism was also studied.     

水溶性CdTe量子点的合成及影响因素研究

本文以巯基乙酸(TGA)为稳定剂,在水相中合成了高荧光CdTe量子点.其荧光发射波长在507 ～ 628nm范围内可调,最窄半峰宽37 nm,粒径约3.4nm,量子产率达42.1％.本实验在固定前躯体配比不变的情况下,考察了前躯体中镉离子的浓度、pH及回流时间对CdTe生长的影响.并用透射电子显微镜(TEM),荧光分光光度计(FS),X射线衍射仪(XRD)等手段对制备的量子点进行了表征.结果表明:CdTe量子点的尺寸随回流时间而增长;反应的pH对量子点的荧光强度有显著影响;镉离子的浓度越大,量子点的生长速度越快,荧光强度却随之降低.     

Size-dependent electrochemiluminescence behavior of water-soluble CdTe quantum dots and selective sensing of l-cysteine

Water-soluble CdTe quantum dots (QDs) with five sizes (2.25, 2.50, 2.77, 3.12, and 3.26 nm) were synthesized with the hydrothermal method. The electrochemiluminescence (ECL) of CdTe QDs was investigated in detail in air-saturated solution without adding foreign oxidant. It was found that the ECL of CdTe QDs displayed a size-dependent property. With the increasing in the particle size of the CdTe QDs, the ECL intensity was gradually increased, in addition, both ECL peak potentials and ECL onset potentials of CdTe QDs were shifted positively. Influences of some factors on the ECL intensity were investigated. Under the optimal conditions, the ECL intensity had a linear relationship with the concentration of l-cysteine (l-Cys) in the range from 1.3 × 10⁻⁶ to 3.5 × 10⁻⁵ mol L⁻¹ (R² 0.996) with a detection limit of 8.7 × 10⁻⁷ mol L⁻¹ (S/N = 3). The proposed method was applied to the determination of l-Cys in real samples with satisfactory results. Compared with previous reports, it has better selectivity for the determination of l-Cys.     

CdSe包覆层数对水溶性CdTe/CdSe (II型)核壳量子点的光学特性和微观结构的影响

在水相合成的CdTe量子点的体系中通过分批次加入新鲜配制的NaHSe和CdCl2溶液,制备出了CdSe包覆层数不同的CdTe/CdSe核壳量子点,并着重考察了CdSe包覆层数对CdTe/CdSe核壳量子点的光学特性以及微观结构的影响.与CdTe量子点相比,CdSe单层包覆的CdTe/CdSe核壳量子点的吸收峰和荧光发射峰出现明显红移;随着CdSe包覆层数的增多,CdTe/CdSe核壳量子点吸收光谱的覆盖范围向长波方向扩展,荧光发射峰强度逐步下降,荧光寿命大幅延长,体现出Ⅱ型核壳量子点的特征.X射线衍射(XRD)分析表明,随着CdSe包覆层数的增多,CdTe/CdSe核壳量子点的粉末衍射峰由CdTe衍射峰位置逐步向CdSe衍射峰位置靠近.CdTe/CdSe核壳量子点因其延伸到近红外区域的宽吸收特性致使其在太阳电池领域具有重要的应用前景.     

Ligand displacement-induced fluorescence switch of quantum dots for ultrasensitive detection of cadmium ions

This paper reports the construction of a simple CdTe quantum dots (QDs)-based sensor with 1,10-phenanthroline (Phen) as ligand, and the demonstration of a novel ligand displacement-induced fluorescence switch strategy for sensitive and selective detection of Cd²⁺ in aqueous phase. The complexation of Phen at the surface quenches the green photoluminescence (PL) of QDs dominated by a photoinduced hole transfer (PHT) mechanism. In the presence of Cd²⁺, the Phen ligands are readily detached from the surface of CdTe QDs, forming [Cd(Phen)₂(H₂O)₂]²⁺ in solution, and as a consequence the PL of CdTe QDs switches on. The detection limit for Cd²⁺ is defined as ∼0.01 nM, which is far below the maximum Cd²⁺ residue limit of drinking water allowed by the U.S. Environmental Protection Agency (EPA). Two consecutive linear ranges allow a wide determination of Cd²⁺ from 0.02 nM to 0.6 μM. Importantly, this CdTe QDs-based sensor features to distinctly discriminate between Cd²⁺ and Zn²⁺, and succeeds in real water samples. This extremely simple strategy reported here represents an attempt for the development of fluorescent sensors for ultrasensitive chemo/biodetection.     

一锅合成绿色到近红外发射的CdTe量子点

以3-巯基丙酸(MPA)为稳定剂,采用水相合成法制备了从绿色到近红外发射的CdTe量子点。系统研究了反应液pH值、镉和碲的物质的量之比及镉和3-巯基丙酸的物质的量之比等实验条件对CdTe量子点体系的发射波长和荧光量子产率的影响。在pH值为10.5,且nCd2+∶nTe2-∶nMPA=1∶0.05∶1.1的条件下,回流0.5 h,CdTe量子点体系在569 nm波长处的荧光量子产率达到30.8%;在7 h的回流时间内,制备的量子点的波长覆盖范围为525～730 nm。分别用X射线粉末衍射、透射电镜和红外光谱对CdTe量子点的晶体结构、形貌及表面基团进行表征。