Mechanism of mercury detection based on interaction of single-strand DNA and hybridized DNA with gold nanoparticles

Mechanisms of interaction of single-strand DNA and hybridized DNA on gold nanoparticles in the presence of Hg²⁺ was studied in this work. Recently the detection of Hg²⁺ using unmodified gold nanoparticles (AuNPs) combined with DNA is becoming a promising technique with the advantages of simplicity, cost-effectiveness and high sensitivity. However, few studies focused on the interaction of ssDNA and hybridized DNA on AuNPs to date. In the present work, we compared the interactions of different DNA probes on AuNPs using both absorption and fluorescence detection. It was found that there were only small partial dsDNA dissociated from the surface of AuNPs after hybridization in the presence of Hg²⁺. Moreover, we found that the aggregated AuNPs/DNA system tended to be dispersed again with increasing Hg²⁺ concentration up to 250 μM. Based on these results, the mechanisms of mercury detection based on interaction between DNA-conjugated gold nanoparticles were investigated. Positively charged dsDNA could bind to the surface of AuNPs and dominate the electrostatic interactions and consequently aggregation of the AuNPs/DNA system.     

A novel H(2)O(2) amperometric biosensor based on gold nanoparticles/self-doped polyaniline nanofibers

A new kind of gold nanoparticles/self-doped polyaniline nanofibers (Au/SPAN) with grooves has been prepared for the immobilization of horseradish peroxidase (HRP) on the surface of glassy carbon electrode (GCE). The ratio of gold in the composite nanofibers was up to 64%, which could promote the conductivity and biocompatibility of SPAN and increase the immobilized amount of HRP molecules greatly. The electrode exhibits enhanced electrocatalytic activity in the reduction of H₂O₂ in the presence of the mediator hydroquinone (HQ). The effects of concentration of HQ, solution pH and the working potential on the current response of the modified electrode toward H₂O₂ were optimized to obtain the maximal sensitivity. The proposed biosensor exhibited a good linear response in the range from 10 to 2000 μM with a detection limit of 1.6 μM (S/N = 3) under the optimum conditions. The response showed Michaelis–Menten behavior at larger H₂O₂ concentrations, and the apparent Michaelis–Menten constant K_m was estimated to be 2.21 mM. The detection of H₂O₂ concentration in real sample showed acceptable accuracy with the traditional potassium permanganate titration.     

A colorimetric and surface-enhanced Raman scattering dual-signal sensor for Hg based on Bismuthiol II-capped gold nanoparticles

The addition of Bismuthiol II to the gold nanoparticles (AuNPs) solution led to the aggregation of AuNPs with a color change from red to blue. As a result, hot spots were formed and strong surface-enhanced Raman scattering (SERS) signal of Bismuthiol II was observed. However, the Bismuthiol II-induced aggregation of AuNPs could be reversed by Hg²⁺ in the system, accompanied by a remarkable color change from blue to red. As evidenced by UV–vis and SERS spectroscopy, the variation in absorption band and SERS intensity was strongly dependent on the concentration of Hg²⁺, suggesting a colorimetric and SERS dual-signal sensor for Hg²⁺. The sensor had a high sensitivity, low detection limits of 2 nM and 30 nM could be achieved by UV–vis spectroscopy and by SERS spectroscopy, respectively. Other environmentally relevant metal ions did not interfere with the detection of Hg²⁺. The method was successfully applied to detect Hg²⁺ in water samples. It was simple, rapid and cost-effective without any modifying or labeling procedure.     

Label-free aptamer-based colorimetric detection of mercury ions in aqueous media using unmodified gold nanoparticles as colorimetric probe

We report a simple and sensitive aptamer-based colorimetric detection of mercury ions (Hg²⁺) using unmodified gold nanoparticles as colorimetric probe. It is based on the fact that bare gold nanoparticles interact differently with short single-strand DNA and double-stranded DNA. The anti-Hg²⁺ aptamer is rich in thymine (T) and readily forms T–Hg²⁺–T configuration in the presence of Hg²⁺. By measuring color change or adsorption ratio, the bare gold nanoparticles can effectively differentiate the Hg²⁺-induced conformational change of the aptamer in the presence of a given salt with high concentration. The assay shows a linear response toward Hg²⁺ concentration through a five-decade range of 1 × 10⁻⁴ mol L⁻¹ to 1 × 10⁻⁹ mol L⁻¹. Even with the naked eye, we could identify micromolar Hg²⁺ concentrations within minutes. By using the spectrometric method, the detection limit was improved to the nanomolar range (0.6 nM). The assay shows excellent selectivity for Hg²⁺ over other metal cations including K⁺, Ba²⁺, Ni²⁺, Pb²⁺, Cu²⁺, Cd²⁺, Mg²⁺, Ca²⁺, Zn²⁺, Al³⁺, and Fe³⁺. The major advantages of this Hg²⁺ assay are its water-solubility, simplicity, low cost, visual colorimetry, and high sensitivity. This method provides a potentially useful tool for the Hg²⁺ detection.     

Simple and sensitive colorimetric detection of cysteine based on ssDNA-stabilized gold nanoparticles

In this paper, we demonstrate a simple and sensitive colorimetric detection of cysteine based on the cysteine-mediated color change of ssDNA-stabilized gold nanoparticles (AuNPs). Cysteine is capable of absorbing onto AuNPs surfaces via the strong interaction between its thiol group and gold. ssDNA molecules which stabilize AuNPs against salt-induced aggregation are removed away by cysteine encapsulation on the AuNPs surfaces, resulting in a characteristic color change of AuNPs from red to blue as soon as salt is added. The ratio of absorptions at 640 to 525 nm (A ₆₄₀/A ₅₂₅) is linear dependent on the cysteine concentration in the range from 0.1 to 5 μM. Furthermore, amino acids other than cysteine cannot mediate the color change under the identical conditions due to the absence of thiol groups, suggesting the selectivity of the proposed method toward cysteine. The employment of complicated protocols and sophisticated processes such as the preparation of modified AuNPs are successfully avoided in design to realize the simple and low-cost cysteine detection; and the high sensitivity and low cost of the method is favorable for practical applications. Figure In the presence of cysteine, cysteine binds to the AuNPs surface via Au-S bond, spontaneously driving ssDNA molecules away from the nanoparticles, which leads to the AuNPs aggregation under the condition of NaCl introduction, and the corresponding color change from red to blue. However, the presence of other amino acids results in no color change due to the absence of thiol groups. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Highly selective and sensitive visualizable detection of Hg2+ based on anti-aggregation of gold nanoparticles

For the widely used gold nanoparticles (AuNPs)-based colorimetric probes, AuNPs generally change from dispersion to aggregation state accompanying with corresponding color turning from red to blue. Although colorimetric probes based on the anti-aggregation of AuNPs show exceptional selectivity and sensitivity, few examples have been reported in literature. A facile but highly sensitive and selective colorimetric probe based on the anti-aggregation of AuNPs transferred from the deactivation of aggregation agent 4,4′-dipyridyl by Hg²⁺ was developed in this work. This reported probe is suitable for real-time detection of Hg²⁺ in water with a detection limit of 3.0 ppb for Hg²⁺, and exhibits a selectivity toward Hg²⁺ by two orders of magnitude over other metal ions. The dynamic range of this probe can be conveniently tuned by adjusting the amount of 4,4′-dipyridyl used.     

Development of a test strip based on DNA-functionalized gold nanoparticles for rapid detection of mercury(II) ions

A rapid,sensitive,selective and reliable strip assay based on DNA-functionalized gold nanoparticles for Hg²⁺ detection has been developed,with a detection limit 5 nmol/L.The measurement principle was based on thymine-Hg²⁺-thymine(T-Hg²⁺-T) coordination chemistry and streptavidin-biotin interaction.The major advantages of this assay are that results can be read visually without any instrument in less than 10 min and that it does not require any sample pretreatment.     

Catalytic gold nanoparticles for fluorescent detection of mercury(II) and lead(II) ions

In this study, we developed a fluorescence assay for the highly sensitive and selective detection of Hg²⁺ and Pb²⁺ ions using a gold nanoparticle (Au NP)-based probe. The Hg–Au and Pb–Au alloys that formed on the Au NP surfaces allowed the Au NPs to exhibit peroxidase-mimicking catalytic activity in the H₂O₂-mediated oxidation of Amplex UltraRed (AUR). The fluorescence of the AUR oxidation product increased upon increasing the concentration of either Hg²⁺ or Pb²⁺ ions. By controlling the pH values of 5 mM tris–acetate buffers at 7.0 and 9.0, this H₂O₂–AUR–Au NP probe detected Hg²⁺ and Pb²⁺ ions, respectively, both with limits of detection (signal-to-noise ratio: 3) of 4.0 nM. The fluorescence intensity of the AUR oxidation product was proportional to the concentrations of Hg²⁺ and Pb²⁺ ions over ranges 0.05–1 μM (R² = 0.993) and 0.05–5 μM (R² = 0.996), respectively. The H₂O₂–AUR–Au NP probe was highly selective for Hg²⁺ (>100-fold) and Pb²⁺ (>300-fold) ions in the presence of other tested metal ions. We validated the practicality of this simple, selective, and sensitive H₂O₂–AUR–Au NP probe through determination of the concentrations of Hg²⁺ and Pb²⁺ ions in a lake water sample and of Pb²⁺ ions in a blood sample. To the best of our knowledge, this system is the first example of Au NPs being used as enzyme-mimics for the fluorescence detection of Hg²⁺ and Pb²⁺ ions.     

Ultrasensitive and rapid screening of mercury(II) ions by dual labeling colorimetric method in aqueous samples and applications in mercury-poisoned animal tissues

Rapid and ultrasensitive detection of trace heavy metal mercury(II) ions (Hg²⁺) are of significant importance due to the induced serious risks for environment and human health. This presented article reports the gold nanoparticle-based dual labeling colorimetric method (Dual-COLO) for ultrasensitive and rapid detection of Hg²⁺ using the specific thymine–Hg²⁺–thymine (T–Hg²⁺–T) as recognition system and the dual labeling strategy for signal amplification. Both qualitative and quantitative detections of Hg²⁺ are achieved successfully in aqueous samples. More importantly, the achieved detection limit of 0.005 ng mL⁻¹ (0.025 nM) without any instruments is very competitive to other rapid detection methods even ICP-MS based methods. This Dual-COLO method is also applied directly for real water sample monitoring and, more importantly, applied in analysis of mercury poisoned animal tissues and body fluidic samples, indicating a potentially powerful and promising tool for environmental monitoring and food safety control.     

A colorimetric sensor array for detection and discrimination of biothiols based on aggregation of gold nanoparticles

Developments of sensitive, rapid, and cheap systems for identification of a wide range of biomolecules have been recognized as a critical need in the biology field. Here, we introduce a simple colorimetric sensor array for detection of biological thiols, based on aggregation of three types of surface engineered gold nanoparticles (AuNPs). The low-molecular-weight biological thiols show high affinity to the surface of AuNPs; this causes replacement of AuNPs’ shells with thiol containing target molecules leading to the aggregation of the AuNPs through intermolecular electrostatic interaction or hydrogen-bonding. As a result of the predetermined aggregation, color and UV–vis spectra of AuNPs are changed. We employed the digital mapping approach to analyze the spectral variations with statistical and chemometric methods, including hierarchical cluster analysis (HCA) and principal component analysis (PCA). The proposed array could successfully differentiate biological molecules (e.g., cysteine, glutathione and glutathione disulfide) from other potential interferences such as amino acids in the concentration range of 10–800 μmol L⁻¹.     

Self-assembled gold nanoparticles on functionalized gold (111) studied by scanning tunneling microscopy

Nanogold colloidal solutions are prepared by the reduction of HAuClO4 with sodium citrate and sodium borohydride.4-Aminothiophenol (ATP) self-assembled monolayers (SAMs) are formed on gold(111) surface,on which gold nanopartides are immobilized and a sub-monolayer of the particles appears.This sub-monolayer of gold nanopartides is characterized with scanning tunneling microscopy (STM),and a dual energy barrier tunneling model is proposed to explain the imageability of the gold nanopartides by STM.This model can also be used to construct multiple energy barrier structure on solid/ liquid interface and to evaluate the electron transport ability of some organic monolayers with the aid of electrochemical method.     

A highly selective nanogold-aptamer catalytic resonance scattering spectral assay for trace Hg using HAuCl4-ascorbic acid as indicator reaction

Single strand DNA (ssDNA) was used to modify nanogold to obtain a nanogold-aptamer resonance scattering (RS) probe (NGssDNA) for Hg²⁺, based on the formation of stable thymine-Hg²⁺-thymine (T-Hg²⁺-T) mismatches and aggregation of the released nanogold particles. After removing the aggregated particles by filtrate membrane, the excess NGssDNA in the filtration solution exhibit catalytic effect on the gold particle reaction between HAuCl₄ and ascorbic acid (AA) that appear as RS peak at 596 nm. When Hg²⁺ concentration increased, the RS intensity at 596 nm decreased. The decreased intensity is linear to Hg²⁺ concentration in the range of 0.00008-0.888 ng/mL Hg²⁺, with detection limit of 0.000034 ng/mL. The nanogold-aptamer catalytic RS assay was applied to determination of Hg²⁺ in water with satisfactory results.     

Interaction Between Two Similar Plane Parallel Double Layers for (NH4)2Fe(SO4)2 or (NH4)2Cu(SO4)2 Type Complex Salt Electrolytes at Positive Surface Potential

Interaction energies between two similar plane parallel double layers for (NH₄)₂Fe(SO₄)₂ or (NH₄)₂Cu(SO₄)₂ type complex salt electrolytes at positive surface potential were expanded in a power series and accurate numeral results were given for 0.1 ≤ y _e  < y ₀ ≤ 20. The general expressions were given for the interaction energies of A _ν +B _ν′ +C_ν? type complex salt electrolytes at y > 0. The interaction energies for simple salts NaCl, CaCl₂, Na₂SO₄, FeCl₃, Na₃PO₄, Mg₃(PO₄)₂, Al₂(SO₄)₃, and complex salts (NH₄)₂Fe(SO₄)₂ or (NH₄)₂Cu(SO₄)₂ at y ₀ = 1 were compared. There was hardly difference between these simple salts and this complex salt for the interaction energies. The interaction energy for complex salt (NH₄)₂Fe(SO₄)₂ was close to that for simple salt Na₃PO₄.

Supplemental files are available for this article. Go to the publisher's online edition of the Journal of Dispersion Science and Technology to view the free supplemental file.     

Energetics of formation of alkali and ammonium cobalt and zinc phosphate frameworks

Alkali and ammonium cobalt and zinc phosphates show extensive polymorphism. Thermal behavior, relative stabilities, and enthalpies of formation of KCoPO₄, RbCoPO₄, NH₄CoPO₄, and NH₄ZnPO₄ polymorphs are studied by differential scanning calorimetry, high-temperature oxide melt solution calorimetry, and acid solution calorimetry.α-KCoPO₄ and γ-KCoPO₄ are very similar in enthalpy. γ-KCoPO₄ slowly transforms to α-KCoPO₄ near 673 K. The high-temperature phase, β-KCoPO₄, is 5-7 kJ mol⁻¹ higher in enthalpy than α-KCoPO₄ and γ-KCoPO₄. HEX phases of NH₄CoPO₄ and NH₄ZnPO₄ are about 3 kJ mol⁻¹ lower in enthalpy than the corresponding ABW phases. There is a strong relationship between enthalpy of formation from oxides and acid-base interaction for cobalt and zinc phosphates and also for aluminosilicates with related frameworks. Cobalt and zinc phosphates exhibit similar trends in enthalpies of formation from oxides as aluminosilicates, but their enthalpies of formation from oxides are more exothermic because of their stronger acid-base interactions. Enthalpies of formation from ammonia and oxides of NH₄CoPO₄ and NH₄ZnPO₄ are similar, reflecting the similar basicity of CoO and ZnO.     

The thermal decomposition of (NH4)[VO(O2)2(NH3)]

The compound, (NH₄)[VO(O₂)₂(NH₃)], thermally decomposes to ammonium metavanadate, which then decomposes to vanadium pentoxide. Using a heating rate of 5 deg·min^–1, the first decomposition step occurs between 74° and 102°C. The transformation degree dependence of the activation energy (-E) is shown to follow a decreasing convex form, indicating that the first decomposition step is a complex reaction with a change in the limiting stage of the reaction. Infrared spectra indicated that the decomposition proceeds via the gradual reduction of the ratio of the (NH₄)₂O to V₂O₅ units from the original 11 ratio in ammonium metavanadate, which may be written as (NH₄)₂O·V₂O₅, to V₂O₅.The assistance of Professor A. M. Heyns (University of Pretoria) and Professor K. L. Range (University of Regensburg) is gratefully acknowledged as well as the financial assistance of the University of Pretoria and the FRD.     

Novel thionin-functionalised core shell magnetic nanoparticles for dispersive solid-phase extraction of Hg(II) in food and water samples

To develop an accurate and precise method for separation and pre-concentration of Hg(II), a novel thionin functionalised core shell structure magnetic material has been prepared and characterised. The extraction ability of the material was evaluated by magnetic solid-phase extraction coupled with inductively coupled plasma mass spectrometry determination of Hg(II) in food and water samples. Combining the advantages of magnetic separation with selective extraction of thionin towards Hg(II), the material exhibits enhanced enrich selectivity and efficiency for Hg(II). The experimental parameters influencing Hg(II) extraction efficiency, including pH of the aqueous solution, the dosage of the adsorbent, extraction time and sample volume, were systematically investigated. Under the optimised conditions, concentration of Hg(II) at 1.0 μg L^?1 can be successfully enriched by the material without the interference of the common co-existing ions. The enrichment factor and adsorption capacity were 250 and 75.2 mg g^?1, and precise of the method was confirmed by analysing the spiked food, water samples and standard water reference samples with the recoveries of 92.5–101.8%.     

Novel,highly selective detection of Cr(III) in aqueous solution based on a gold nanoparticles colorimetric assay and its application for determining Cr(VI)

A simple, rapid, sensitive and field-portable colorimetric technique for the determination of Cr(III) in aqueous solution based on an aggregation-induced color transition of gold nanoparticles (AuNPs) has been developed. AuNPs were first functionalized with a dithiocarbamate-modified N-benzyl-4-(pyridin-4-ylmethyl)aniline ligand (BP-DTC). Chelation of Cr(III) by several of these ligands, bound to different nanoparticles, led to nanoparticle aggregation in solution. This gave rise to a color change from wine-red to blue that was discernible by the naked eye and an easily measurable alteration in the extinction spectrum of the particles. The method could be used to determine Cr(III) with a detection limit of 31 ppb. Furthermore, selective detection of trace Cr(III) in aqueous solution in the presence of 12 other transition metal ions has been achieved. Toward the goal of practical applications, the sensor has been further evaluated with a view to monitoring Cr(III) in nutritional supplements and the blood of diabetes patients and also applied in the indirect determination of Cr(VI) in waste water.     

Highly sensitive and selective assay method for iodide ion determination based on gold nanoparticles conjugated with glycol chitosan

A sensitive colorimetric method for the determination of iodide ions was developed using gold nanoparticles (AuNPs) functionalised with glycol chitosan (GCS). The iodide ions were at the centre of the O–I^––O coordination structure, formed with the GCS-AuNPs, reducing their interparticle distance and inducing aggregation. Time-of-flight secondary ion mass spectrometry analyses showed that the bound iodide ions were coordinated to the oxygen atoms of the ethylene glycol in GCS, with this aggregation leading to a considerable variation in colour from light red to dark violet. Using this GCS-AuNP probe, the iodide ion concentration in environmental, biological and pharmaceutical samples could be determined by both the naked eye and UV-Vis spectroscopy. Additionally, the sensitivity of the detection was found to be markedly enhanced at pH 6, where a more pronounced colour change was observed. The absorption ratio A₇₀₀/A₅₂₁ of the functionalised AuNP solution correlated linearly with the iodide ion concentration within the range 0.0–10.0 mg/L, and the limits of detection in tap water, pond water, and bovine serum solution were 3.5, 3.6, and 3.4 μg/L, respectively. The present assay method can thus be utilised to rapidly measure the concentration of iodide ions in aqueous samples.     

Sensitive and selective detection of glutathione based on anti-catalytical growth of gold nanoparticles colorimetric sensor

Gold nanoparticles (AuNps) are often employed in different detection paths based on the catalytic growth mechanism; AuNps could act as catalyst for the reduction of AuCl₄^? and result in the enlargement of the original AuNps. However, there are few probes based on the anti-catalytical growth of AuNps in previous studies. In this article, we proposed a simple colorimetric sensor for the detection of glutathione (GSH) based on the anti-catalytical growth of AuNps, the strong affinity of GSH make it readily combine with AuNps or metal ions (AuCl₄^?), and thus inhibit the catalytical growth of AuNps through the specific property of GSH. Therefore, the UV absorbance of detection system could be used to estimate the concentration of GSH, and the probe exhibits highly sensitive and selective detection of the concentration of GSH with a wide linear from 13 to 800 nM within 20 min. Meanwhile, a good linear relationship with correlation coefficient of R² = 0.9795 was obtained. It is believed that this research could broaden the choices of GSH detection methods.