利用互补核酸杂交富集金胶实现信号扩增的电化学凝血酶蛋白生物传感器研究

介绍了一种利用互补核酸杂交富集金胶实现信号扩增的蛋白质生物传感器. 以凝血酶蛋白为研究对象, 利用凝血酶蛋白相对应的两段核酸适配体, 将适配体Ⅰ固定在磁性颗粒上, 用于特异性地捕获蛋白, 将适配体Ⅱ标记金胶作为检测信标. 由凝血酶蛋白和相对应的两段核酸适配体构建三明治结构的凝血酶蛋白生物传感器. 另外, 再通过信标金胶上过剩的核酸适配体链与另一段标记有金胶的互补核酸进一步杂交, 获得金胶的选择性聚集, 实现了信号扩增. 通过信号扩增, 使此传感器的灵敏度大大提高, 对凝血酶蛋白的检测下限可达到4.52×10-15 mol/L. 平行测定浓度为7.47×10-14 mol/L的凝血酶8次, 其RSD为3.0%. 该生物传感器对凝血酶蛋白有很好的特异性, 其它蛋白如溶菌酶和牛血清白蛋白的存在对于检测没有影响.     

基于纳米金适配体传感器的激光诱导检测凝血酶

利用激光可使纳米金修饰的双链DNA(dsDNA)去杂化和适配体的特异性,设计了一种新颖、稳定、可控且高灵敏的凝血酶检测方法。将两端分别修饰金纳米粒子与荧光标记物的核酸适配体与其互补链杂化制成稳定的dsDNA传感器,当凝血酶存在时,通过激光触发传感器去杂化释放适配体并与凝血酶结合,拉近金纳米粒子与荧光标记物的距离,产生猝灭使荧光信号发生变化。对激光照射时间、激光输出功率、温育时间等条件进行优化。在最优条件下,荧光强度变化值(ΔI)与凝血酶浓度在0.55~33 nmol/L范围内呈现出良好的线性关系,其线性回归方程为y=0.0082x+0.2714,相关系数R^2为0.98,血清中加标回收率为95.5~102.7%,且溶菌酶等无明显干扰。该方法可作为凝血酶的检测方法。     

Au Nanoparticle-DNAzyme Dual Catalyst System for Sensitively Colorimetric Detection of Thrombin

A novel colorimetric aptasensor was developed for thrombin detection with high sensitivity and specificity. The assay takes the advantage of Au nanoparticles-DNAzyme as a dual catalytic system for signal amplification. Au nanparticles were modified with peroxidase mimicking DNAzyme sequence as well as thrombin binding aptamer. And then the thrombin binding aptamer hybridized with its complementary sequence which was immobilized on the surface of the magnetic nanoparticles to construct the colorimetric aptasensor. In the presence of thrombin, the target-induced displacement takes place, resulting in the dissociation of the aptasensor. The DNAzyme functioned Au NPs are released due to the combine ability of thrombin binding aptamer with thrombin. The released Au NPs are capable of catalyzing the colorless 2,2'-azino-bis(3-ethylbenzothiazoline)-6-sulfonic acid(ABTS) conversion into a blue-green product by H₂O₂-mediated oxidation, thus can amplify the colorimetric readout signals of thrombin detection. Such a device can serve as a novel selectivity sensor for thrombin with a detection limit of 0.6 nmol/L.     

A electrochemiluminescence aptasensor for detection of thrombin incorporating the capture aptamer labeled with gold nanoparticles immobilized onto the thio-silanized ITO electrode

A novel electrochemiluminescence (ECL) aptasensor was proposed for sensitive and cost-effective detection of the target thrombin adopted an aptamer-based sandwich format. To detect thrombin, capture aptamers labeled with gold nanoparticles (AuNPs) were first immobilized onto the thio-silanized ITO electrode surface through strong Au-S bonds. After catching the target thrombin, signal aptamers tagged with ECL labels were attached to the assembled electrode surface. As a result, an AuNPs-capture-aptamer/thrombin/ECL-tagged-signal-aptamer sandwich type was formed. Treating the resulting electrode surface with tri-n-propylamine (TPA) and applying a swept potential to the electrode, ECL response was generated which realized the detection of target protein. Spectroscopy and electrochemical impedance techniques were used to characterize and confirm the fabrication of the ECL aptasensor. AuNPs amplification and smart sensor fabrication art were implemented for the sensitive and cost-effective detection purpose. Signal-to-dose curve excellently followed a sandwich format equation and could be used to quantify the protein, and the detection limit was estimated to be 10 nM. Other forms of thrombin such as β- and γ-thrombins had negligible response, which indicated a high specificity of α-thrombin detection. The aptasensor opened up new fields of aptamer applications in ECL domain, a highly sensitive technique, and had a promising perspective to be applied in microarray analysis.     

基于金胶的选择性聚集实现p53基因的电化学超灵敏检测

介绍了一种利用金胶的选择性聚集实现信号扩增的超灵敏的电化学方法, 用于人类p53肿瘤抑制剂基因的检测. 在实验中, 根据p53基因的序列设计了能特异性检测p53肿瘤抑制剂基因的二段探针, 在一段探针上固定磁性颗粒以捕获并富集目标基因, 同时在另一段探针上标记金纳米颗粒作为检测信标. 另外, 通过硫代三聚氰酸和金纳米颗粒的自组装作用, 形成金纳米颗粒和硫代三聚氰酸的网状结构, 获得金纳米颗粒的选择性聚集, 实现信号扩增. 用此法检测目标p53野生型DNA, 最低检测限为2.24×10-17 mol/L, 同时进一步研究了该探针对p53野生型和一碱基错配的突变型的选择性.     

Homogeneous DNA Detection Based on Fluorescence Quenching by Nanoparticles in Single-step Format :Target-Induced Configuration Transform

A new strategy for homogeneous detection of DNA hybridization in single-step format was developed based on fluorescence quenching by gold nanoparticles. The gold nanoparticle is functionalized with 5’-thiolated 48-base oligonucleotide (probe sequence), whose 3’-terminus is labeled with fluorescein (FAM), a negatively charged fluorescence dye. The oligonucleotide adopts an extended configuration due to the electrostatic repulsion between negatively charged gold nanoparticle and the FAM-attached probe sequence. After addition of the complementary target sequence, specific DNA hybridization induces a conformation change of the probe from an extended structure to an arch-like configuration, which brings the fluorophore and the gold nanoparticle in close proximity. The fluorescence is efficiently quenched by gold nanoparticles. The fluorescence quenching efficiency is related to the target concentration, which allows the quantitative detection for target sequence in a sample. A linear detection range from 1.6 to 209.4 nmol/L was obtained under the optimized experimental conditions with a detection limit of 0.1 nmol/L. In the assay system, the gold nanoparticles act as both nanoscaffolds and nanoquenchers. Furthermore, the proposed strategy, in which only two DNA sequences are involved, is not only different from the traditional molecular beacons or reverse molecular beacons but also different from the commonly used sandwich hybridization methods. In addition, the DNA hybridization detection was achieved in homogenous solution in a single-step format, which allows real-time detection and quantification with other advantages such as easy operation and elimination of washing steps.     

Metal-enhanced fluorescent probes based on silver nanoparticles and its application in IgE detection

In this paper, a novel metal plasmon coupled with an aptamer–nucleotide hybridized probe was fabricated and applied for protein detection. The specific aptamer and single-strand oligonucleotide were chemically bound to silver nanoparticles (AgNPs), and Cy5-labeled, complementary single-strand oligonucleotides were hybridized with the particle-bound oligonucleotides. The hybridized DNA duplexes were regarded as rigid rods that separated the fluorophore Cy5 and the surface of AgNPs to reduce the competitive quenching. Using a model system comprising human immunoglobulin E (IgE) as the analyte and goat antihuman IgE as immobilized capture antibody on glass slides, we demonstrate that the detection performance of the synthetic probe was superior to the aptamer-based fluorescent probes. The results showed a good linear correlation for human IgE in the range from 10 ng/ml to 6.25 μg/ml. The detection limit obtained was 1 ng/ml, which was 50 times lower than that using Cy5 oligonucleotide/aptamer hybrid duplex (Probe2) due to the metal-enhanced fluorescence effect. This new strategy opens the possibility for the preparation of high-sensitivity detection probes based on metal nanoparticles.     

Time-resolved fluorescence aptamer-based sandwich assay for thrombin detection

In the present study, the authors report a novel sensitive method for the detection of thrombin using time-resolved fluorescence sensing platform based on two different thrombin aptamers. The thrombin 15-mer aptamer as a capture probe was covalently attached to the surface of glass slide, and the thrombin 29-mer aptamer was fluorescently labeled as a detection probe. A bifunctional europium complex was used as the fluorescent label. The introduction of thrombin triggers the two different thrombin aptamers and thrombin to form a sandwich structure. The fluorescence intensity is proportional to the thrombin concentration. The present sensing system could provide both a wide linear dynamic range and a low detection limit. The proposed sensing system also presented satisfactory specificity and selectivity. Results showed that thrombin was retained at the aptamer-modified glass surface while nonspecific proteins were removed by rinsing with buffer solution. This approach successfully showed the suitability of aptamers as low molecular weight receptors on glass slides for sensitive and specific protein detection.     

Electrochemiluminescence biosensor for the assay of small molecule and protein based on bifunctional aptamer and chemiluminescent functionalized gold nanoparticles

An electrochemiluminescence (ECL) biosensor for simultaneous detection of adenosine and thrombin in one sample based on bifunctional aptamer and N-(aminobutyl)-N-(ethylisoluminol) functionalized gold nanoparticles (ABEI-AuNPs) was developed. A streptavidin coated gold nanoparticles modified electrode was utilized to immobilize biotinylated bifunctional aptamer (ATA), which consisted of adenosine and thrombin aptamer. The ATA performed as recognition element of capture probe. For adenosine detection, ABEI-AuNPs labeled hybridization probe with a partial complementary sequence of ATA reacted with ATA, leading to a strong ECL response of N-(aminobutyl)-N-(ethylisoluminol) enriched on ABEI-AuNPs. After recognition of adenosine, the hybridization probe was displaced by adenosine and ECL signal declined. The decrease of ECL signal was in proportion to the concentration of adenosine over the range of 5.0 × 10⁻¹²–5.0 × 10⁻⁹ M with a detection limit of 2.2 × 10⁻¹² M. For thrombin detection, thrombin was assembled on ATA modified electrode via aptamer–target recognition, another aptamer of thrombin tagged with ABEI-AuNPs was bounded to another reactive site of thrombin, producing ECL signals. The ECL intensity was linearly with the concentration of thrombin from 5 × 10⁻¹⁴ M to 5 × 10⁻¹⁰ M with a detection limit of 1.2 × 10⁻¹⁴ M. In the ECL biosensor, adenosine and thrombin can be detected when they coexisted in one sample and a multi-analytes assay was established. The sensitivity of the present biosensor is superior to most available aptasensors for adenosine and thrombin. The biosensor also showed good selectivity towards the targets. Being challenged in real plasma sample, the biosensor was confirmed to be a good prospect for multi-analytes assay of small molecules and proteins in biological samples.     

Enzyme-free surface plasmon resonance aptasensor for amplified detection of adenosine via target-triggering strand displacement cycle and Au nanoparticles

Herein, we combine the advantage of aptamer technique with the amplifying effect of an enzyme-free signal-amplification and Au nanoparticles (NPs) to design a sensitive surface plasmon resonance (SPR) aptasensor for detecting small molecules. This detection system consists of aptamer, detection probe (c-DNA1) partially hybridizing to the aptamer strand, Au NPs-linked hairpin DNA (Au-H-DNA1), and thiolated hairpin DNA (H-DNA2) previously immobilized on SPR gold chip. In the absence of target, the H-DNA1 possessing hairpin structure cannot hybridize with H-DNA2 and thereby Au NPs will not be captured on the SPR gold chip surface. Upon addition of target, the detection probe c-DNA1 is forced to dissociate from the c-DNA1/aptamer duplex by the specific recognition of the target to its aptamer. The released c-DNA1 hybridizes with Au-H-DNA1 and opens the hairpin structure, which accelerate the hybridization between Au-H-DNA1 and H-DNA2, leading to the displacement of the c-DNA1 through a branch migration process. The released c-DNA1 then hybridizes with another Au-H-DNA1 probe, and the cycle starts anew, resulting in the continuous immobilization of Au-H-DNA1 probes on the SPR chip, generating a significant change of SPR signal due to the electronic coupling interaction between the localized surface plasma of the Au NPs and the surface plasma wave. With the use of adenosine as a proof-of-principle analyte, this sensing platform can detect adenosine specifically with a detection limit as low as 0.21 pM, providing a simple, sensitive and selective protocol for small target molecules detection.     

A homogeneous hemin/G-quadruplex DNAzyme based turn-on chemiluminescence aptasensor for interferon-gamma detection via in-situ assembly of luminol functionalized gold nanoparticles,deoxyribonucleic acid,interferon-gamma and hemin

A homogeneous hemin/G-quadruplex DNAzyme (HGDNAzyme) based turn-on chemiluminescence aptasensor for interferon-gamma (IFN-γ) detection is developed, via dynamic in-situ assembly of luminol functionalized gold nanoparticles (lum-AuNPs), DNA, IFN-γ and hemin. The G-quadruplex oligomer of the HGDNAzyme was split into two halves, which was connected with the complementary sequence of P1 (IFN-γ-binding aptamer) to form the oligonucleotide P2. P2 hybridized with IFN-γ-binding aptamer and meanwhile assembled onto lum-AuNPs through biotin–streptavidin specific interaction. When IFN-γ was recognized by aptamer, P2 was released into the solution. The two lateral portions of P2 combined with hemin to yield the catalytic hemin/G-quadruplex DNAzyme, which amplified the luminol oxidation for a turn-on chemiluminescence signaling. Based on this strategy, the homogeneous aptasensor enables the facile detection of IFN-γ in a range of 0.5–100 nM. Moreover, the aptasensor showed high sensitivity (0.4 nM) and satisfactory specificity, pointing to great potential applications in clinical analysis.     

双链荧光核酸适体探针用于蛋白质的简便快速检测

发展了一种基于双链荧光核酸适体(F-Aptamer)探针的简单快速检测蛋白质的分析方法.该双链荧光Aptamer探针由一条带荧光标记的Aptamer探针和带猝灭标记的互补DNA组成,当靶蛋白存在时,能形成比双链荧光Aptamer探针更稳定的F-Aptamer/蛋白质复合物,并发出荧光,从而实现对蛋白质的简便快速检测,检测线性范围为6~100 nmol/L,检出限为6 nmol/L.该方法设计简单,对核酸适体分子的大小和空间结构没有要求,可作为一种通用的基于F-Aptamer识别机理的蛋白质检测方法.     

L-Argininamide biosensor based on S1 nuclease hydrolysis signal amplification

A sensitive method is presented for the detection of L-argininamide. It is based on the amplification of the hydrolysis of S1 nuclease of single-stranded regions of an aptamer-target complex. The S1 nuclease, which is sequence-independent, is used to “recycle” target molecules, thus leading to strongly enhanced chemiluminescence (CL). L-Argininamide was chosen as model analyte. The DNA aptamer and its complementary DNA were labeled with the CL reagent N-(4-aminobutyl)-N-ethylisoluminol (ABEI). The DNA complementary to the aptamer was labeled with ABEI and immobilized on magnetic beads (MBs) coated with gold. The aptamer was also labeled with ABEI and self-assembled on the MBs. A duplex was formed due to hybridization between the DNA aptamer and the DNA complementary to the aptamer. In the presence of the target L-argininamide, a stem-loop aptamer structure is formed which subsequently denatures the duplex. This switch from a duplex structure to a stem-loop structure causes the formation of single-stranded regions both in the target-aptamer and in the single-stranded DNA on the MBs. The nuclease hydrolyzes the single-stranded regions and single-stranded DNA. Ultimately, L-argininamide is released which then interacts with another aptamer on the MB, thereby leading to one more L-argininamide. This autocatalytic cycle can generate substantial quantities of ABEI which then can be sensitively determined by the diperiodatonickelate-isoniazide reaction system. L-argininamide can be detected in the concentration range from 3.0?×?10^?4 to 3.0?×?10^?7 M, and the limit of detection is 1.0?×?10^?7 M.

纳米探针芯片技术用于微量乙肝病毒DNA的检测

利用两组探针修饰的微粒:(1)表面标记有可与待测乙肝病毒(HBV) DNA另一端结合的纳米金探针1(信号探针)以及可与信号探针部分结合的纳米金探针2(检测探针);(2)表面标记有可与待测HBV DNA一端结合的磁珠探针(捕捉探针1).检测靶HBV DNA时,磁珠探针与信号探针在液相中可分别与HBV DNA靶序列一端结合最终形成三明治样结构.再以磁场将三明治样复合物从反应液中分离,以DTT溶液将信号探针从纳米金颗粒上洗脱.洗脱后的信号探针数量反映靶基因的多寡,信号探针一段与预先点样的基因芯片上的捕捉探针2结合,检测探针与信号探针另一段相结合,最后用银染液将检测探针显色从而得到靶目标DNA相对定量信息.结果表明,本检测方法的检测灵敏度达到10-15 mol/L水平.检测时间少于1.5 h,检测结果与HBV DNA水平呈现较好的线性关系且无假阳性结果;本方法有望用于乙肝病人血清中HBV DNA的快速筛测及其它微生物基因的检测.     

Novel application of fluorescence coupled capillary electrophoresis to resolve the interaction between the G‐quadruplex aptamer and thrombin

The dynamic binding status between the thrombin and its G‐quadruplex aptamers and the stability of its interaction partners were probed using our previously established fluorescence‐coupled capillary electrophoresis method. A 29‐nucleic acid thrombin binding aptamer was chosen as a model to study its binding affinity with the thrombin ligand. First, the effects of the cations on the formation of G‐quadruplex from unstructured 29‐nucleic acid thrombin binding aptamer were examined. Second, the rapid binding kinetics between the thrombin and 6‐carboxyfluorescein labeled G‐quadruplex aptamer was measured. Third, the stability of G‐quadruplex aptamer–thrombin complex was also examined in the presence of the interfering species. Remarkably, it was found that the complementary strand of 29‐nucleic acid thrombin binding aptamer could compete with G‐quadruplex aptamer and thus disassociated the G‐quadruplex structure into an unstructured aptamer. These data suggest that our in‐house established fluorescence‐coupled capillary electrophoresis assay could be applied to binding studies of the G‐quadruplex aptamers, thrombin, and their ligands, while overcoming the complicated and costly approaches currently available.     

高灵敏纳米金比色芯片检测乙型肝炎病毒DNA及其变异

构建了新型纳米金比色芯片,利用Taq DNA连接酶的连接特异性,将其与乙型肝炎病毒DNA( HBV-DNA)靶序列完全互补杂交的捕获探针(固定在芯片上)和纳米金修饰的探针连接成一条链,从而将纳米金颗粒固定到芯片点阵上,再通过银染反应放大,形成裸眼可见的显色信息.通过点阵的位置及灰度,即可判断HBV-DNA靶序列的单碱基突变,并得出相对定量信息.本实验对不同浓度的HBV-DNA靶序列进行了检测.结果显示:此技术对单碱基突变有很强的特异性识别能力,并且具有较高的灵敏度(约10 pmol/L),在10～100 pmol/L浓度范围内表现出较好的线性关系.该技术检测时间短(＜1 h)、操作简单、不需要特殊的检测设备,具有很好的临床应用前景.     

基于Ru(bpy)32+-SiO2纳米颗粒的核酸适配体传感器对凝血酶的电致化学发光检测

本文应用核酸适配体构建了一种新型的电致化学发光检测蛋白体系。两个核酸适配体结合凝血酶的两个不同位点,利用这两核酸适配体与凝血酶的高亲和力构建三明治传感体系检测凝血酶。一个核酸适配体固定在金电极上用来捕获凝血酶,另一个标记有包裹电致化学发光活性物Ru(bpy)₃²⁺的二氧化硅纳米颗粒,用来检测电致化学发光信号。此核酸适配体传感器对凝血酶具有特异识别性,电致化学发光信号与凝血酶的浓度直接相关,非特异性识别的牛血红蛋白、牛血清白蛋白不干扰测定。由于在检测的核酸适配体上标记的纳米颗粒包裹有多个发光活性物,因此大大提高了发光效率和灵敏度,此法对凝血酶的线性响应范围为2.0 fmol•L^-1～2.0 pmol•L^-1,检测限可达1.0 fmol•L^-1。     

Simultaneously fluorescence detecting thrombin and lysozyme based on magnetic nanoparticle condensation

In this protocol, a fluorescent aptasensor based on magnetic separation for simultaneous detection thrombin and lysozyme was proposed. Firstly, one of the anti-thrombin aptamer and the anti-lysozyme aptamer were individually immobilized onto magnetic nanoparticles, acting as the protein captor. The other anti-thrombin aptamer was labeled with rhodamine B and the anti-lysozyme aptamer was labeled with fluorescein, employing as the protein report. By applying the sandwich detection strategy, the fluorescence response at 515 nm and 578 nm were respectively corresponding to lysozyme and thrombin with high selectivity and sensitivities. The fluorescence intensity was individually linear with the concentration of thrombin and lysozyme in the range of 0.13-4 nM and 0.56-12.3 nM, and the detection limits were 0.06 nM of thrombin and 0.2 nM of lysozyme, respectively. The preliminary study on simultaneous detection of thrombin and lysozyme in real plasma samples was also performed. It shows that the proposed approach has the good character for simultaneous multiple protein detection.     

基于胸腺嘧啶-汞离子-胸腺嘧啶结构和纳米金放大传感器检测汞离子

利用Hg2+与DNA中胸腺嘧啶(T)结合的高度特异性和纳米金在石英晶体微天平(QCM)上的信号放大作用,设计了一种简便灵敏的Hg2+检测方法.纳米金采用柠檬酸钠还原法制备,其表面用末端带巯基的寡核苷酸探针进行自组装修饰,并用6-巯基己-1-醇(MCH)部分取代表面探针,以减少杂交空间位阻.结果表明,寡核苷酸链长为9bp、T个数为7的序列具有较高灵敏度;线性范围为5.0～100 nmol/L;检出限为2.0 nmol/L;Ca2+、Mg2+等其它金属离子无明显干扰.用于环境水样中Hg2+的测定, RSD<2.9%;加标回收率为97.3%～101.2%     

采用纳米金和荧光标记的适配体检测凝血酶

将荧光染料分子标记的含29个碱基的可识别凝血酶的DNA适配体非特异吸附到纳米金表面,荧光发生猝灭,加入凝血酶后,凝血酶与适配体特异性结合,使适配体空间结构发生改变,荧光染料分子远离纳米金表面,荧光恢复,因此可以实现对凝血酶的检测。实验结果表明,这种检测方法简便、快速、特异性强,检出限为0.54 nmol/L(对应样品体积为200μL)。