Surface modification of porous graphite for ion exchange chromatography

Summary Three distinct types of weak anion exchanger have been prepared by adsorption of polyethyleneimine (PEI) on to porous graphite (PGC): PGC coated dynamically with PEI, PGC coated with. an insoluble monolayer of PEI, and PGC coated with a cross-linked polymeric PEI. Using model solutes iodate, bromide, nitrate and nitrite, dissolved in aqueous buffers, the modified PGC's show typical ion exchange behaviour, and give chromatographic performance similar to that of bonded ion-exchange silica gels. Retention is reduced by increasing the ionic strength of the buffer, and by increasing the pH. A mechanism to explain the observed trends is presented.     

Potentiometric detection of monovalent anions separated by ion chromatography using all solid-state contact PVC matrix membrane electrode

Summary An all solid-state contact tubular PVC-matrix membrane electrode has been applied for potentiometric detection of inorganic and organic monovalent anions using phosphate and hydrogen phosphate eluents at low concentrations. This is a “monovalent detection method” as the selectivity of the electrode towards monovalent anions results in some other anions being undetected unless the concentration of those other anions is higher than 10⁻³ mol dm⁻³ in the sample solution injected. It takes only eight minutes to complete the separation with a good resolution. Theoretical and practical considerations are discussed, and in particular, sensitivity, linearity, detection limit and dynamic behaviour are presented. The use of an all solid-state contact bromide-selective electrode as a detector offers so far the best simultaneous sensitivity toward all anions when compared with other detection methods. Determination of Cl⁻ and NO₃ ⁻ ions in river, rain and drinking water samples without any further sample preconcentration has been successfully achieved. The detection limit is sub-ppb for most of anions in a 20 μL injection volume.     

Halogenated compound response in an oxygen doped ion mobility detector for capillary gas chromatography

An ion mobility detector that has been specifically developed for interfacing with capillary gas chromatography is investigated in the negative ion mode. Like the electron capture detector, to which this instrument is closely related, the ion mobility detector shows an enhanced response to low molecular weight halogenated compounds when a small quantity of oxygen is doped into the make-up gas flow. Under O₂ doping conditions, the device can operate in a reactant ion monitoring mode responding universally to compounds capable of capturing thermal electrons and in a tunable selective product ion mode providing increased selectivity over that achieved by the ECD. At an oxygen concentration of 0.5%, minimum detectable amounts as low as 600 femtograms have been realized for carbon tetrachloride. Selectivity of chloro- versus bromo- compounds is demonstrated using a mixture of p-dichlorobenzene and p-dibromobenzene.     

Rapid-scanning electrochemical detector with micro working electrode for micro high-performance liquid chromatography

Summary A voltammetric system controlled by a personal computer was developed using a PC-8801 mk II computer (NEC, Tokyo, Japan) for rapid-scanning voltammetry. The system was combined with an ultra-small-volume electrolytic cell with a single-carbon-fiber (7-μm diameter and 3-mm length) working electrode and used as a new detector for micro high-performance liquid chromatography. The system's capability for the detection of catecholamines and their related compounds was investigated. Three-dimensional voltamo-chromatograms were obtained by adding the potential axis of the electrode to the conventional current and time axes, leading to a dramatic improvement in the identification of each chroamtographic peak.     

A simple method for the study of salbutamol pharmacokinetics by ion chromatography with direct conductivity detection

A simple method for the study of the pharmacokinetics of salbutamol using ion chromatography with direct conductivity detection without chemical suppression is presented in this paper. Baseline separation of salbutamol from plasma components was achieved by using diluted HNO₃ (2 mmol l⁻¹) as mobile phase with acetonitrile (6%, v/v) as modifier. Atenolol was utilized as internal standard. Under the optimal conditions, the linear regression coefficients of the calibration curves are 0.996 within the concentration range of 1000-3 ng ml⁻¹ salbutamol. The detection limit (signal-to-noise ratio = 3) was 1 ng ml⁻¹ salbutamol. The noncompartmental pharmacokinetic parameters for salbutamol following administration of 8 mg salbutamol to 18 subjects were tested. The results coincided most satisfactorily with the results obtained by using reversed-phase high performance liquid chromatography (HPLC) with fluorescence detection.     

Preparation and chromatographic performance of polymer-based anion exchangers for ion chromatography: A review

In the last decade the developments in the field of ion chromatography (IC) were aimed at increasing the efficiency, sensitivity and rapidity of analysis, as well as on improving separation selectivity. Since selectivity and efficiency to the large extent depend on the surface chemistry of the stationary phase, the development of novel anion exchangers remains one of the priority tasks in modern IC. The exact chemistry of commercially available resins is not known and not many literature data devoted to the procedures of preparing anion exchangers for IC have become available in the last 10–15 years. However, the knowledge about the surface chemistry of anion exchangers can provide understanding of the trends in selectivity and efficiency changes, as well as help with the choice of the stationary phase type suitable for solving a particular analytical task. The current review is devoted to the methods of preparing anion exchangers based on polystyrene-divinylbenzene (PS-DVB) and ethylvinylbenzene-divinylbenzene (EVB-DVB) for IC of inorganic and small organic anions and is aimed at demonstrating the improvement of their performance over the years, which was brought by the development of the new types of stationary phase architecture.     

A novel ion selective membrane potentiometric sensor for direct determination of Fe(III) in the presence of Fe(II)

A new PVC membrane potentiometric sensor that is highly selective to Fe(III) ions was prepared by using 2-[(2-hydroxy-1-propenyl-buta-1,3-dienylimino)-methyl]-4-p-tolylazo-phenol [HPDTP] as a suitable carrier. The electrode exhibits a linear response for iron(III) ions over a wide concentration range (3.5 × 10⁻⁶ to 4.0 × 10⁻²) with a super Nernstian slope of 28.5 (±0.5) per decade. The electrode can be used in the pH range from 4.5 to 6.5. The proposed sensor shows fairly a good discriminating ability towards Fe³⁺ ion in comparison to some hard and soft metals such as Fe²⁺, Cd²⁺, Cu²⁺, Al³⁺ and Ca²⁺. It has a response time of <15 s and can be used for at least 2 months without any measurable divergence in response characteristics. The electrode was used in the direct determination of Fe³⁺ in aqueous samples and as an indicator electrode in potentiometric titration of Fe(III) ions.     

A new procedure, based on combustion to sulphate and ion chromatography for the analysis of elemental sulphur in sediments

Summary A procedure exploiting the bomb preparation method for the analysis of total sulphur in organic materials has been developed for the determination of zero-valent sulphur (S^o) in sediments. Sediment samples were dried over magnesium oxide and sonicated in the presence of toluene to extract S^o. Toluene solutions were directly oxidized by combustion in a bomb containing sodium carbonate-bicarbonate buffer, which trapped sulphur species generated from S^o as sulphate ions. These were in turn analysed by suppressed anion chromatography with ion-conductivity detection. The method was used to determine the distribution of S^o in saltmarsh sediment cores.     

Rapid and ultra-sensitive GC/MS analyses with a microchannel plate array detector Part I: Possibilities of simultaneous ion detection in narrow-bore GC/MS

Identification and detection limits for scanning and non-scanning mass spectrometers are discussed. It is theoretically deduced and experimentally confirmed that these limits are on the low pico-and femtogram levels, respectively, when using conventional secondary electron multiplier-amplifier systems. The sensitivity can be increased at least tenfold by pulse-counting techniques, instead of current amplification, provided the chemical noise is sufficiently low. The potential advantages of a detection system for simultaneous ion detection in a significant mass range, for obtaining complete mass spectra in fast GC/MS analyses, are demonstrated. A double focusing mass spectrometer was constructed, using the well-proven Mattauch-Herzog principles. By application of an “electronic photoplate”, substance identification in the low femtogram range on a millisecond time scale, so far only accessible for single ion monitoring techniques, is feasible.     

Simple, stable and sensitive electrogenerated chemiluminescence detector for high-performance liquid chromatography and its application in direct determination of multiple fluoroquinolone residues in milk

A simple, stable and sensitive electrogenerated chemiluminescence (ECL) detector was developed. It was based on tris(2,2-bipyridyl)ruthenium(II) (Ru(bpy)₃²⁺) immobilized on the surface of a Pt wire with Nepem-105D ion exchange solution. The detector was prepared by inserting a Pt wire with immobilized Ru(bpy)₃²⁺ (working electrode) into a capillary tube, followed by inserting another Pt wire (counter electrode) in this tube and sealing. ECL behavior was investigated using ofloxacin as an analyte. Under optimal conditions, stable ECL intensity was obtained. This detector has been used in HPLC-ECL for the determination of multiple target fluoroquinolone residues in milk. There is no post column reagent addition, which would dilute the analytes, potentially leading to chromatographic band-broadening. The system is very simple with low dead volume, low baseline and background noise, together with high sensitivity and stability. The as-prepared ECL detector, when was used for the determination of ofloxacin, pefloxacin, enrofloxacin and difloxacin in milk, demonstrated adequate sensitivity to allow quantification of trace FQ levels in commercial milk samples. One or more of the target FQ analytes were present at levels above the LOD of the new ECL detector in each and every one of the 22 milk samples analysed.     

A new tool for inorganic nitrogen speciation study: simultaneous determination of ammonium ion, nitrite and nitrate by ion chromatography with post-column ammonium derivatization by Nessler reagent and diode-array detection in rain water samples

The paper presents a new method for a simultaneous determination of inorganic nitrogen species in the oxidized (NO₂⁻, NO₃⁻) and reduced (NH₄⁺) form in rain water samples. The method is based on a system of nitrogen species separation employing ion exchange and diode-array detection. The ions are separated in a strong ion-exchanger, nitrites and nitrates are determined directly at 208 and 205 nm, respectively, while the ammonium ions are determined in the column hold-up time after a post-column derivatization by the Nessler reagent, at 425 nm. The use of a diode-array detector permits a simultaneous identification of the inorganic nitrogen species in 8 min. The detection limits obtained are: NO₂⁻, 0.1 mg L⁻¹; NO₃⁻, 0.05 mg L⁻¹; NH₄⁺, 1 mg L⁻¹. The method proposed has been successfully used for speciation analysis of inorganic nitrogen in precipitation.     

A simplified version of the total kjeldahl nitrogen method using an ammonia extraction ultrasound-assisted purge-and-trap system and ion chromatography for analyses of geological samples

The total Kjeldahl nitrogen (TKN) method was simplified by using a manifold connected to a purge-and-trap system immersed into an ultrasonic (US) bath for simultaneous ammonia (NH₃) extraction from many previously digested samples. Then, ammonia was collected in an acidic solution, converted to ammonium (NH₄⁺), and finally determined by ion chromatography method. Some variables were optimized, such as ultrasonic irradiation power and frequency, ultrasound-assisted NH₃ extraction time, NH₄⁺ mass and sulfuric acid concentration added to the NH₃ collector flask. Recovery tests revealed no changes in the pH values and no conversion of NH₄⁺ into other nitrogen species during the irradiation of NH₄Cl solutions with 25 or 40 kHz ultrasonic waves for up to 20 min. Sediment and oil free sandstone samples and soil certified reference materials (NCS DC 73319, NCS DC 73321 and NCS DC 73326) with different total nitrogen concentrations were analysed. The proposed method is faster, simpler and more sensitive than the classical Kjeldahl steam distillation method. The time for NH₃ extraction by the US-assisted purge-and-trap system (20 min) was half of that by the Kjeldahl steam distillation (40 min) for 10 previously digested samples. The detection limit was 9 μg g⁻¹ N, while for the Kjeldahl classical/indophenol method was 58 μg g⁻¹ N. Precision was always better than 13%. In the proposed method, carcinogenic reagents are not used, contrarily to the indophenol method. Furthermore, the proposed method can be adapted for fixed-NH₄⁺ determination.     

A simple and efficient protocol for large‐scale preparation of three flavonoids from the flower of Daphne genkwa by combination of macroporous resin and counter‐current chromatography

In this paper, macroporous resin column chromatography and counter‐current chromatography (CCC) were applied for large‐scale preparative separation of three flavonoids from the flower of Daphne genkwa, a famous Chinese medicinal herb. Nine kinds of resins were investigated by adsorption and desorption tests and D101 macroporous resin was selected for the first cleaning‐up, in which 40% aqueous ethanol was used to remove the undesired constituents and 90% aqueous ethanol was used to elute the targets. The crude extract after the first step was directly subjected to the preparative CCC purification using the solvent system composed of n‐hexane–ethyl acetate–methanol–water (4:5:4:5, v/v). The compounds apigemin (823 mg), 3‐hydroxyl‐genkwanin (842 mg) and genkwanin (998 mg) with the purities of 98.79, 97.71 and 93.53%, respectively, determined by HPLC were produced from 3‐g crude extract only in one CCC run. Their chemical structures were identified by MS, UV and the standards.     

A rapid and convenient method for preparative separation of three indissolvable polyphenols from Euphorbia pekinensis by the flexible application of solvent extraction combined with counter‐current chromatography

A rapid and convenient method was established to preparatively isolate the three ellagic acid types of compounds, which were the main polyphenols in Euphorbia pekinensis, by flexibly applying solvent extraction combined with counter‐current chromatography (CCC). The total extract (extracted using 95% ethanol) of E. pekinensis was pretreated by two simple steps before CCC isolation, following the procedure: the total extract was extracted by classical solvent extraction using petroleum ether and ethyl acetate, respectively, and then the ethyl acetate extract was suspended using 95% ethanol, after being allowed to stand overnight, the sediment was obtained. Partial sediment (100 mg) was then directly separated by CCC with a two‐phase solvent system composed of chloroform‐95% ethanol‐water‐85% formic acid (50:50:50:5, v/v/v/v). About 22 mg of 3,3′‐dimethoxy ellagic acid (1), 12 mg of 3,3′‐di‐O‐methyl‐4‐O‐(β‐d ‐xylopyranosyl)ellagic acid (2), and 35 mg of ellagic acid (3) with purities of 96.0, 95.2, and 95.4% were obtained respectively in one step within 4 h. After being purified by washing with methanol, the purities of the three compounds obtained were all above 98%. The purities were determined by HPLC and their chemical structures were further identified by ¹H and ¹³C NMR spectroscopy. The recoveries were calculated as 84.6, 85.7, and 89.5%, respectively. The result demonstrated that the present isolation method was rapid, economical and efficient for the preparative separation of polyphenols from E. pekinensis.     

A consecutive preparation method based upon accelerated solvent extraction and high‐speed counter‐current chromatography for isolation of aesculin from Cortex fraxinus

A consecutive preparation method based upon accelerated solvent extraction (ASE) coupled with high‐speed counter‐current chromatography (HSCCC) was presented and aesculin was obtained from Cortex fraxinus. The extraction condition of ASE was optimized with response surface methodology; some significant parameters such as the solvent system and its stability, the amount of loading sample in HSCCC were also investigated. The original sample was first extracted with methanol at 105°C and 104 bar for 7 min using ASE, then the extracts were consecutively introduced into the HSCCC system and separated and purified with the same ethyl acetate/n‐butanol/water (7:3:10, v/v/v) solvent system for five times without further exchange and equilibrium. About 3.1 ± 0.2 mg/g in each time and total of 15.4 mg/g aesculin with purity over 95% was isolated from Cortex fraxinus. The results demonstrated that the consecutive preparation method was time and solvent saving and high throughput, it was suitable for isolation of aesculin from Cortex fraxinus, and also has good potential on the separation and purification of effective compounds from natural product.     

Combining chromatography and chemometrics for the characterization and authentication of fats and oils from triacylglycerol compositional data—A review

The characterization and authentication of fats and oils is a subject of great importance for market and health aspects. Identification and quantification of triacylglycerols in fats and oils can be excellent tools for detecting changes in their composition due to the mixtures of these products. Most of the triacylglycerol species present in either fats or oils could be analyzed and identified by chromatographic methods. However, the natural variability of these samples and the possible presence of adulterants require the application of chemometric pattern recognition methods to facilitate the interpretation of the obtained data. In view of the growing interest in this topic, this paper reviews the literature of the application of exploratory and unsupervised/supervised chemometric methods on chromatographic data, using triacylglycerol composition for the characterization and authentication of several foodstuffs such as olive oil, vegetable oils, animal fats, fish oils, milk and dairy products, cocoa and coffee.