Partial molar volumes and partial molar adiabatic compressibilities of a short chain perfluorosurfactant: Sodium heptafluorobutyrate in aqueous solutions at different temperatures

Density and ultrasound measurements of sodium heptafluorobutyrate in aqueous solutions at T = (283.15, 288.15, 293.15, 298.15, 303.15, 308.15, 313.15, 318.15, and 323.15) K have been obtained. From these results partial molar volumes and isentropic partial molar adiabatic compressibilities were calculated. Deviations from the Debye-Hückel limiting law provide evidence for limited association at lower concentrations. The change of the partial molar volume and isentropic partial molar adiabatic compressibility upon aggregation was calculated. Variations of the change of partial molar volumes and isentropic partial molar adiabatic compressibility upon aggregation are discussed in terms of temperature.     

Excess molar volumes of binary mixtures (an ionic liquid + water): A review

This review covers recent developments in the area of excess molar volumes for mixtures of {ILs (1) + H₂O (2)} where ILs refers to ionic liquids involving cations: imidazolium, pyridinium, pyrrolidinium, piperidinium, morpholinium and ammonium groups; and anions: tetraborate, triflate, hydrogensulphate, methylsulphate, ethylsulphate, thiocyanate, dicyanamide, octanate, acetate, nitrate, chloride, bromide, and iodine. The excess molar volumes of aqueous ILs were found to cover a wide range of values for the different ILs (ranging from −1.7 cm³ · mol⁻¹ to 1.2 cm³ · mol⁻¹). The excess molar volumes increased with increasing temperature for all systems studied in this review. The magnitude and in some cases the sign of the excess molar volumes for all the aqueous ILs mixtures, apart from the ammonium ILs, were very dependent on temperature. This was particularly important in the dilute IL concentration region. It was found that the sign and magnitude of the excess molar volumes of aqueous ILs (for ILs with hydrophobic cations), was more dependent on the nature of the anion than on the cation.     

Determination of the excess molar and partial molar volumes of the constituents in the binary mixtures with tri-ethylamine

The excess molar volume and excess partial molar volumes of binary mixtures of tri-ethylamine with toluene (Tn), ethylbenzene (Ebz) and n-propylbenzene (n-PBz) have been calculated using the MS-Excel method. The excess molar volumes have been found to be negative throughout the entire range of composition. The temperature effects are found to be insignificant, so the mixtures may be termed regular mixtures of Hildebrand.     

Partial molar volumes of amino acid derivatives in water

The partial molar volumes at infinite dilution for a number of hydrochlorides and sodium salts of N-methyl derivatives of , -aminocarboxylic acids in water at 25°C are measured and related to their van der Waals volumes. Results indicate that 4.96±0.48 water molecules hydrate a betaine hydrochloride. Volumes of proton ionization and interaction terms are evaluated. Group contributions to the partial molar volumes are also reported.     

Thermodynamics of aqueous mixtures of nonelectrolytes. I. Excess volumes of water-n-alcohol mixtures at several temperatures

Excess volumes of binary mixtures of water with methanol, ethanol and 1-propanol were obtained from density measurements at 5 degree intervals from 15 to 35°C over the entire composition range. Excess thermal expansion coefficients, partial molar excess volumes, and expansibilities at 25°C were derived from the results. The significance of these values is discussed in relation to hypothesized structural changes in the mixtures.     

Excess volumes,partial molar and adiabatic compressibilities of binary mixtures of n-alcohols with monoethanolamine

Speed of sound and densities of solution mixtures of four aliphatic alcohols with monoethanolamine were measured over a full range of composition. The density measurements were carried out from 298 to 358 K. Results of these measurements were used to calculate adiabatic compressibilities, excess adiabatic compressibilities, excess volumes and partial molar quantities. From the analysis of the results, the nature of interaction between the aliphatic alcohols and monoethanolamine is deduced.     

Viscosities of oxalic acid and its salts in water and binary aqueous mixtures of tetrahydrofuran at different temperatures

Relative viscosities for the solutions of oxalic acid and its salts, viz. ammonium oxalate, sodium oxalate and potassium oxalate, at different concentrations have been determined in water and in binary aqueous mixtures of tetrahydrofuran (THF) [5, 10, 15 and 20% by weight of THF] at 298.15 K, and in water and in 5% (w/w) THF + water at five different temperatures. The data have been evaluated using the Jones-Dole equation and the obtained parameters have been interpreted in terms of solute-solute and solute-solvent interactions. The activation parameters of viscous flow have been obtained which depicts the mechanism of viscous flow. The oxalic acid and its salts behave as structure breakers in water and in binary aqueous mixtures of THF.     

Molar and partial molar excess volumes of di-n-butylamine with chloroalkanes at 25°C

Molar excess volumes and partial molar excess volumes are reported for binary mixtures of dibutylamine+dichloromethane, trichloromethane and tetrachloromethane at 25°C, over the whole concentration range. A comparative study is made between the primary and secondary amines and their mixtures with chloroalkanes. The applicability of the so-called ERAS model for predicting thermodynamic excess properties is tested here for excess molar volumes; the calculated values agree quite well with experimental data.     

Excess molar volumes of binary mixtures of 4-methyl-2-pentanone and some hydrocarbons

Summary Excess molar volumes (V ^E) for binary mixtures of 4-methyl-2-pentanone and some hydrocarbons (cyclohexane, benzene, toluene, andp-xylene) over the whole mole fraction range are determined by density measurement at 293.15 K. The variation of theV ^E values with the composition for all binary systems is symmetrical except for benezene where the dependence is sigmoid. TheV ^E values are positive for the binary mixture of the ketone with cyclohexane. For the other hydrocarbons, theV ^E values are progressively negative over the entire mole fraction range except the system containing benzene, where a few values at higher mole fractions of benzene are positive. The results are discussed in terms of molecular interactions steric effects.

---

Molare Zusatzvolumina von binären Mischungen von 4-Methyl-2-pentanon und einigen Kohlenwasserstoffen

Zusammenfassung Molare Zusatzvolumina (V ^E) von binären Mischungen von 4-Methyl-2-pentanon und einigen Kohlenwasserstoffen (Cyclohexan, Benzol, Toluol undp-Xylol) wurden bei 293.15 K durch Dichtemessungen über den gesamten Molenbruchbereich bestimmt. Mit Ausnahme der binären Mischung mit Benzol (sigmoide Kurvenform) ist die Änderung vonV ^E in Abhängigkeit von der Zusammensetzung der Mischungen symmetrisch. Für das System Keton/Cyclohexan sind dieV ^E-Werte stark positiv, während sie für die anderen Gemische negativ sind. Eine Ausnahme bildet wieder das System mit Benzol als Kohlenwasserstoff, wo einige Werte bei höheren Molenbrüchen von Benzol positiv sind. Die Ergebnisse werden im Zusammenhang mit intermolekularen Wechselwirkungen und dem Einfluß sterischer Faktoren diskutiert.

     

Partial molar volumes of organic compounds in water. VI. α,ω-diaminoalkane hydrochlorides

Measurements of the partial molar volumes in water at 25°C of the mono-and dihydrochlorides of the ,-diaminoalkanes, up to a chain length of 10 carbon atoms, are reported. Volumes of ionization have been determined and the electrostriction of the solvent calculated. Effects of the substituents are felt up to the -carbon atom, but thereafter are only very weak or nonexistent.     

Partial molar volumes and adiabatic compressibilities ofN-acetyl-DL-serinamide andN-acetyl-L-threonmamide in dilute aqueous solutions

Densities and sound velocities in dilute aqueous solutions ofN-acetyl-DL-serinamide andN-acetyl-L-threoninamide were measured at 5, 15, 25, 35, and 45°C. Partial molar volumes and partial molar adiabatic compressibilities of these amino acid derivatives at infinite dilution were determined. The partial molar quantities for the parent amino acids, serine and threonine, were also determined and compared with the acetyl amide derivatives. The contribution of the side chain of theN-acetyl amino acid amide or amino acid to the partial molar quantities were estimated from the difference between the partial molar quantities for the solute studied and those for the corresponding species,N-acetyl-glycinamide or glycine, without the side chain.     

Thermodynamics of aqueous phosphate solutions: Apparent molar heat capacities and volumes of the sodium and tetramethylammonium salts at 25°C

A Picker flow microcalorimeter and a flow densimeter were used to obtain apparent molar heat capacities and apparent molar volumes of aqueous solutions of Na₃PO₄ and mixtures of Na₂HPO₄ and NaH₂PO₄. Identical measurements were also made on solutions of tetramethylammonium salts to evaluate the importance of anion-cation interaction. The experimental apparent molar properties were analyzed in terms of a simple extended Debye-Hückel model and the Pitzer ion-interaction model, both with a suitable treatment for the effect of chemical relaxation on heat capacities, to derive the partial molar properties of H₂PO ₄ ^– (aq), HPO ₄ ^2– (aq) and PO ₄ ^3– (aq) at infinite dilution. The volume and heat capacity changes for the second and third ionization of H₃PO₄(aq) have been determined from the experimental data. The importance of ionic complexation with sodium is discussed.     

Densities,excess molar volumes,and partial molar volumes for binary mixtures of water with monoethanolamine,diethanolamine, and triethanolamine from 25 to 80°C

We have measured densities of binary mixtures of water with monoethanolamine (MEA), diethanolamine (DEA), and triethanolamine (TEA) over the full range of compositions and over the temperature range from 25 to 80°C. Results of these measurements have been used in calculating excess molar volumes and partial molar volumes. Knowledge of the volumetric properties of these mixtures is useful in connection with industrial treatment of acidic gases; derived excess molar volumes and partial molar volumes can be used as a basis for understanding some of the molecular interactions in water-organic mixtures.Presented at the Symposium, 76^th CSC Congress, Sherbrooke, Quebec, May 30–June 3, 1993, honoring Professor Donald Patterson on the occasion of his 65^th birthday.     

Excess and partial excess molar volumes of 1,4-dichlorobutane with butanols at 25 and 40°C

From density measurements over the whole composition range at 25 and 40°C excess molar volumes for binary mixtures of 1,4-dichlorobutane with l-butanol, 2-butanol, 2-methyl-l-propanol or 2-methyl-2-propanol are calculated. V^E results were fitted by the method of least squares to a smoothing equation. Excess partial molar volumes and limiting excess partial molar volumes at 25° are also calculated.     

Relative partial molar enthalpies and apparent molar volumes of dipeptides in aqueous solution

Enthalpies of dilution at 25°C of aqueous solutions of the dipeptides glycylglycine, glycylalanine and alanylalanine have been determined and used to calculate the partial molar enthalpies of the solvent water in the solutions. The partial molar volumes of these dipeptides are also reported. The results are discussed in terms of the likely solute-solvent interactions.     

Standard partial molar volumes of alcohols in aqueous dodecyltrimethylammonium bromide solutions

Density measurements of water-dodecyltrimethylammonium bromide (DTAB)-alcohol ternary systems as a function of alcohol and surfactant concentrations were carried out at 25°C. The alcohols were propanol (PrOH), 2-propanol (2-PrOH) and hexanol (HexOH). The apparent molar volume V_,R of alcohols have been calculated and the standard (infinite dilution) partial molar volumes of alcohols V _R at each surfactant concentration were obtained by means of a least squares fit of V_,R vs. the alcohol concentration. The V _R vs. surfactant concentration curves have been rationalized in terms of the partial molar volume of alcohol in the aqueous V _f and the micellar V _b phases and the distribution constant of alcohol between the aqueous and the micellar phases K. The V _b values for PrOH and HexOH together with those of butanol and pentanol previously reported satisfy the additivity rule giving a methylene group contribution of 16.7 cm³-mol^–1 which is identical to that reported in the literature from the study of pure liquid alcohols. No difference between V _b for PrOH and 2-PrOH has been found. From density data of water-alcohol and water-surfactant binary systems and of water-surfactant-alcohol ternary system, the apparent molar volume of the surfactant in the water-alcohol mixed solvent V_,S have been calculated as a function of the surfactant concentration and of the mixed solvent composition. The effect of the alkyl chain length of the alcohols and the effect of isomerization of the alcohols on the V_,S vs. surfactant concentration trends have been analyzed.     

Effect of charge on the standard partial molar volumes and heat capacities of organic electrolytes in methanol and water

Previously developed additivity schemes for nonelectrolytes have been used to estimate and for tetraalkyl and tetraphenyl methanes in methanol and water. Corrections have been applied to the thermodynamic values of these model compounds to account for a variation in size of the central atom, and these were used to ascertain the effect of charge on and of alkyl and phenyl quaternary ions having N, P and B as central atoms. Investigations of R₄NBr, (R=methyl to heptyl) salts show that the charge effect on and of R₄N⁺ ions is large and relatively independent of ion size suggesting that the solvent molecules penetrate the ions. The ability to estimate and of the quaternary ions in the bromide salt solutions has made it possible to make ionic assignments with some confidence; (Br^–) has been evaluated as 19.7±2 and 30.2±7 cm³-mol^–1 and (Br^–) as –83±7 and –68±30 J-K^–1-mol^–1 in methanol and water, respectively. The use of organic ions for making ionic assignments of and is critically examined and comparisons with other assignments are made. The scaled particle theory is employed to divide the heat capacities of electrolytes into cavity and interaction contributions.     

Partial molar volumes in aqueous mixtures of nonelectrolytes. II. Isopropyl alcohol

Densities of isopropyl alconol-water mixtures were measured over the entire mole fraction range at 5, 15, 25, 35 and 45°C. Apparent and partial molar volumes and partial molar expansibilities were derived for both components. The results were compared with those of a previous investigation of t-butyl alcohol-water mixtures.     

Partial molar volumes of organic compounds in water. III. Carbohydrates

Partial molar volumes in water at 25°C have been determined for a number of carbohydrates, including mono-, di-, tri-, tetra-, penta-, hexa-, hepta-, and polysaccharides and their derivatives. The experimental values can be calculated from the van der Waals volumes of the molecules if account is taken of the shrinkage in volume caused by hydrogen-bonding of solvent molecules to the hydroxyl groups of the sugars.