BUCKLING ANALYSIS OF ELASTIC FILM BONDED ON SMP SUBSTRATE1)

形状记忆聚合物具有形状变化后在特定条件下可恢复的特点,因此作为一种柔性基底材料在柔性电子中得到广泛应用。对于形状记忆聚合物基底和弹性薄膜组成的双层结构,当 基底收缩时,其表面的弹性薄膜可以形成屈曲波形。针对基底收缩过程中波形的变化, 本文实验测得形状记忆聚合物材料在不同温度下的 属性,结合一维应变恢复函数,利用柔性基底表面薄膜屈曲波形参数(波幅、波长等)表达式,求解得到了在基底收缩的过程中,弹性薄膜屈曲波形的变化规律,和实验结果吻合很好。     

形状记忆聚合物力学行为及其物理机制

形状记忆聚合物是一类环境响应主动形变智能软材料,是智能材料与结构领域的新兴研究内容之一。宏观概括其物理和力学行为的研究热点,主要包括三个方面：材料与环境之间的信息交换（如热量、能量等）,主动形变控制（如驱动方法、形变行为本构建模等）,软材料及其结构力学（如相变/转变热力学、复合材料设计等）。形状记忆聚合物的记忆效应源于分子链段本征结构的热运动,受外场激励影响,是分子链段结构（包括构型和构象）松弛行为的宏观表象,遵循Arrhenius定律。本文从物理和力学两方面讨论了形状记忆聚合物的分子链段热力学行为及其熵弹效应、分子结构松弛力学行为、环境效应记忆行为的物理和力学机制,系统地对形状记忆聚合物分子结构本征属性及其物理机理、记忆效应转变机制及其力学内涵、温度记忆效应、多场耦合效应响应行为等热点和难点问题进行了分析和讨论。最后,论文展望了形状记忆聚合物力学行为研究的未来发展方向。     

Modeling size-dependent thermo-mechanical behaviors of shape memory polymer Bernoulli-Euler microbeam

The objective of this paper is to model the size-dependent thermo-mechanical behaviors of a shape memory polymer(SMP) microbeam. Size-dependent constitutive equations, which can capture the size effect of the SMP, are proposed based on the modified couple stress theory(MCST). The deformation energy expression of the SMP microbeam is obtained by employing the proposed size-dependent constitutive equation and Bernoulli-Euler beam theory. An SMP microbeam model, which includes the formulations of deflection, strain, curvature, stress and couple stress, is developed by using the principle of minimum potential energy and the separation of variables together. The sizedependent thermo-mechanical and shape memory behaviors of the SMP microbeam and the influence of the Poisson ratio are numerically investigated according to the developed SMP microbeam model. Results show that the size effects of the SMP microbeam are significant when the dimensionless height is small enough. However, they are too slight to be necessarily considered when the dimensionless height is large enough. The bending flexibility and stress level of the SMP microbeam rise with the increasing dimensionless height, while the couple stress level declines with the increasing dimensionless height.The larger the dimensionless height is, the more obvious the viscous property and shape memory effect of the SMP microbeam are. The Poisson ratio has obvious influence on the size-dependent behaviors of the SMP microbeam. The paper provides a theoretical basis and a quantitatively analyzing tool for the design and analysis of SMP micro-structures in the field of biological medicine, microelectronic devices and micro-electro-mechanical system(MEMS) self-assembling.     

Pseudoelastic effect in autoparametric non-ideal vibrating system with SMA spring

In this paper a three degrees of freedom autoparametric system with limited power supply is investigated numerically. The system consists of the body, which is hung on a spring and a damper, and two pendulums connected by shape memory alloy (SMA) spring. Shape memory alloys have ability to change their material properties with temperature. A polynomial constitutive model is assumed to describe the behavior of the SMA spring. The non-ideal source of power adds one degree of freedom, so the system has four degrees of freedom. The equations of motion have been solved numerically and pseudoelastic effects associated with the martensitic phase transformation are studied. It is shown that in this type system one mode of vibrations might excite or damp another mode, and that except different kinds of periodic vibrations there may also appear chaotic vibrations. For the identification of the responses of the system's various techniques, including chaos techniques such as bifurcation diagrams and time histories, power spectral densities, Poincarè maps and exponents of Lyapunov may be used.     

Theoretical analysis of the deformation of SMP sandwich beam in flexure

Shape memory polymers (SMPs) can have a large frozen strain but with a very small recovery stiffness in comparison with shape memory metals or ceramics. To provide more deployable stresses for the application of actuators, sandwich beams consisting of a SMP core and two thin metallic skins were considered. The packaging behaviors of two types of SMP sandwich beams, aluminum/SMP/aluminum and steel/SMP/steel, were discussed. Due to the high compliance of SMP core on packaging condition that the testing temperature is above the activation temperature of the material, buckling and post-buckling are the essential deformation mechanisms of SMP sandwich beams under bending. Theoretical solutions were derived in studying such non-linear behaviors, including the initiation of critical buckling, post-buckling response, and final failure modes. Systematic parameter’s analyses, e.g., buckling half-wavelength, amplitude, location of the neutral-strain surface in different packaging curvatures, were also presented.     

A thermoviscoelastic model for amorphous shape memory polymers: Incorporating structural and stress relaxation

A thermoviscoelastic constitutive model is developed for amorphous shape memory polymers (SMP) based on the hypothesis that structural and stress relaxation are the primary molecular mechanisms of the shape memory effect and its time-dependence. This work represents a new and fundamentally different approach to modeling amorphous SMPs. A principal feature of the constitutive model is the incorporation of the nonlinear Adam–Gibbs model of structural relaxation and a modified Eyring model of viscous flow into a continuum finite–deformation thermoviscoelastic framework. Comparisons with experiments show that the model can reproduce the strain–temperature response, the temperature and strain-rate dependent stress–strain response, and important features of the temperature dependence of the shape memory response. Because the model includes structural relaxation, the shape memory response also exhibits a dependence on the cooling and heating rates.     

Finite deformation thermo-mechanical behavior of thermally induced shape memory polymers

Shape memory polymers (SMPs) are polymers that can demonstrate programmable shape memory effects. Typically, an SMP is pre-deformed from an initial shape to a deformed shape by applying a mechanical load at the temperature T_H>T_g. It will maintain this deformed shape after subsequently lowering the temperature to T_L<T_g and removing the externally mechanical load. The shape memory effect is activated by increasing the temperature to T_D>T_g, where the initial shape is recovered. In this paper, the finite deformation thermo-mechanical behaviors of amorphous SMPs are experimentally investigated. Based on the experimental observations and an understanding of the underlying physical mechanism of the shape memory behavior, a three-dimensional (3D) constitutive model is developed to describe the finite deformation thermo-mechanical response of SMPs. The model in this paper has been implemented into an ABAQUS user material subroutine (UMAT) for finite element analysis, and numerical simulations of the thermo-mechanical experiments verify the efficiency of the model. This model will serve as a modeling tool for the design of more complicated SMP-based structures and devices.     

Middle ear reconstruction estimated by recurrence plot technique

Middle ear surgery techniques have enabled to improve hearing destroyed by a disease. Despite huge improvement in instrumentation and techniques the results of hearing improvement surgery are still difficult to predict. This paper presents the results of vibrations measurements in a human middle ear obtained at the Medical University of Lublin. Vibrations of the stapes in the case of the intact ossicular chain, after cement incus rebuilding and incus interpositions are compared each other. In this aim a new approach of ossicles vibrations observation is introduced in order to complete information obtained from classical approach which bases on the transfer function. Measurements of ossicular chain vibrations are performed on fresh human temporal bone specimen using the laser doppler vibrometer. Next, after classical research, the extended analysis with the recurrence plots technique is performed.     

Thermomechanical behavior of thermoset shape memory polymer programmed by cold-compression: Testing and constitutive modeling

Programming is a key process for thermally activated stress or strain recovery of shape memory polymers (SMPs). Typically, programming requires an initial heating above the glass transition temperature (T_g), subsequent cooling below T_g and removal of the applied load, in order to fix a temporary shape. This work adopted a new approach to program thermoset SMPs directly at temperatures well below T_g, which effectively simplified the shape fixing process. 1-D compression programming below T_g and free shape recovery of a thermoset SMP were experimentally investigated. Functional stability of the shape fixity under various environmental attacks was also experimentally evaluated. A mechanism-based thermoviscoelastic-thermoviscoplastic constitutive model incorporating structural and stress relaxation was then developed to predict the nonlinear shape memory behavior of the SMP trained below T_g. Comparison between the prediction and the experiment showed good agreement. The structure dependence of the thermomechanical behavior of the SMP was further discussed through a parametric study per the validated constitutive model. This study validates that programming by cold-compression is a viable alternative for thermally responsive thermoset SMPs.     

Vibration analysis and active control of nearly periodic two-span beams with piezoelectric actuator/sensor pairs

The piezoelectric materials are used to investigate the active vibration control of ordered/disordered periodic two-span beams. The equation of motion of each sub-beam with piezoelectric patches is established based on Hamilton's principle with an assumed mode method. The velocity feedback control algorithm is used to design the controller. The free and forced vibration behaviors of the two-span beams with the piezoelectric actuators and sensors are analyzed. The vibration properties of the disordered two-span beams caused by misplacing the middle support are also researched. In addition, the effects of the length disorder degree on the vibration performances of the disordered beams are investigated. From the numerical results, it can be concluded that the disorder in the length of the periodic two-span beams will cause vibration localizations of the free and forced vibrations of the structure, and the vibration localization phenomenon will be more and more obvious when the length difference between the two sub-beams increases. Moreover, when the velocity feedback control is used, both the forced and the free vibrations will be suppressed. Meanwhile, the vibration behaviors of the two-span beam are tuned.     

Development and implementation of a beam theory model for shape memory polymers

In this paper we focus on the development of a beam theory for a small strain continuum model of thermoviscoelastic shape memory polymers (SMP). Rather than a history integral model that is common for viscoelastic materials, a thermodynamically based state evolution model developed by Ghosh and Srinivasa (2011a) is used as the basis for the beam model based on the Euler–Bernoulli beam theory. An example of a three-point bend test is simulated using the beam theory model. The numerical solution is implemented by using an operator split technique that utilizes an elastic predictor and dissipative corrector. The key idea is that the elastic predictor is based on the solution to a beam theory boundary value problem while the dissipative corrector is entirely local (and hence can be parallelized) and is applied by considering the beam as a two or three dimensional body. This enables a very rapid solution of the problem yet maintaining fidelity of the distribution of inelastic strains across the cross-section. A displacement based convergence criterion is used in each time step. This algorithm is validated by using a three-point bending experiment for three different material cases: elastic, plastic and thermoplastic response. Time step convergence and mesh density convergence studies are carried out for the thermoviscoelastic FEM model. Finally, we implement and study this model for a SMP beam undergoing three-point bending strain recovery and stress recovery thermomechanical loading.     

Constitutive modeling of shape memory polymer based self-healing syntactic foam

In a previous study, it was found that the shape memory functionality of a shape memory polymer based syntactic foam can be utilized to self-seal impact damage repeatedly, efficiently, and almost autonomously [Li G., John M., 2008. A self-healing smart syntactic foam under multiple impacts. Comp. Sci. Technol. 68(15–16), 3337–3343]. The purpose of this study is to develop a thermodynamics based constitutive model to predict the thermomechanical behavior of the smart foam. First, based on DMA tests and FTIR tests, the foam is perceived as a three-phase composite with interfacial transition zone (interphase) coated microballoons dispersed in the shape memory polymer (SMP) matrix; for simplicity, it is assumed to be an equivalent two-phase composite by dispersing elastic microballoons into an equivalent SMP matrix. Second, the equivalent SMP matrix is phenomenologically assumed to consist of an active (rubbery) phase and a frozen (glassy) phase following Liu et al. [Liu, Y., Gall, K., Dunn, M.L., Greenberg, A.R., Diani J., 2006. Thermomechanics of shape memory polymers: uniaxial experiments and constitutive modeling. Int. J. Plasticity 22, 279–313]. The phase transition between these two phases is through the change of the volume fraction of each phase and it captures the thermomechanical behavior of the foam. The time rate effect is also considered by using rheological models. With some parameters determined by additional experimental testing, the prediction by this model is in good agreement with the 1D test result found in the literature. Parametric studies are also conducted using the constitutive model, which provide guidance for future design of this novel self-healing syntactic foam and a class of light-weight composite sandwich structures.     

THE WAVELET TRANSFORM OF PERIODIC FUNCTION AND NONSTATIONARY PERIODIC FUNCTION

Some properties of the wavelet transform of trigonometric function, periodic function and nonstationary periodic function have been investigated. The results show that the peak height and width in wavelet energy spectrum of a periodic function are in proportion to its period. At the same time, a new equation, which can truly reconstruct a trigonometric function with only one scale wavelet coefficient, is presented. The reconstructed wave shape of a periodic function with the equation is better than any term of its Fourier series. And the reconstructed wave shape of a class of nonstationary periodic function with this equation agrees well with the function.     

Nonlinear dynamics and chaos in coupled shape memory oscillators

Shape memory and pseudoelastic effects are thermomechanical phenomena associated with martensitic phase transformations, presented by shape memory alloys. This contribution concerns with the dynamical response of coupled shape memory oscillators. Equations of motion are formulated by assuming a polynomial constitutive model to describe the restitution force of the oscillators and, since they are associated with a five-dimensional system, the analysis is performed by splitting the state space in subspaces. Free and forced vibrations are analyzed showing different kinds of responses. Periodic, quasi-periodic, chaos and hyperchaos are all possible in this system. Numerical investigations show interesting and complex behaviors. Dynamical jumps in free vibration and amplitude variation when temperature characteristics are changed are some examples. This article also shown some characteristics related to chaos–hyperchaos transition.     

Nonlinear dynamics of a reduced multimodal Timoshenko beam subjected to thermal and mechanical loadings

Large amplitude vibrations of a Timoshenko beam under an influence of temperature are analysed in this paper. In the considered model the temperature increases instantly and the heat is uniformly distributed along the beams length and cross-section. The mathematical model, represented by partial differential equations takes into account thermal and mechanical loadings. Next, the problem is reduced by means of the Galerkin method, considering the first three natural vibration modes of a simply supported beam in the both ends. The influence of the temperature on amplitudes and localisation of the resonance zones and stability of the solutions is studied numerically and analytically by the multiple time scale method. The bifurcation points, existence of unstable lobes and transition from regular to chaotic oscillations are shown.     

Experimental Investigation of Separated Shear Flow under Subharmonic Perturbations over a Backward-Facing Step

Subharmonic-perturbed shear flow downstream of a two-dimensional backward-facing step was experimentally investigated. The Reynolds number was Re_h = 2.0 ×10⁴, based on free-stream velocity and step height. Planar 2D-2C particle image velocimetry was employed to measure the separating and reattaching flow in the horizontal-vertical plane in the center position. The subharmonic perturbations were generated by an oscillating flap which was implemented over the step edge and driven by periodic Ampere force. The subharmonic frequency was 55 Hz as the half of the fundamental frequency of the turbulent shear layer. As a result of the subharmonic perturbations, the size of recirculation region behind the backward-facing step is reduced and the time-averaged reattachment length is 31.0% shorter than that of the natural flow. The evolution of vortices, including vortex roll-up, growth and breakdown process, is analyzed by using phase-averaging, cross-correlation function and proper orthogonal decomposition. It is found that Reynolds shear stress is considerably increased in which the vortices roll up and then break down further downstream. In particular, rapid growth of vortices based on the “step mode” occurs at approximate half of the recirculation region, caused by in interaction between the shear layer and the recirculation region. Furthermore, the coherent structures, which are represented by a phase-correlated POD mode pair, are reconstructed in phases in order to show regular patterns of the subharmonic-perturbed coherent structures.     

Zener internal damping in modelling of axially moving viscoelastic beam with time-dependent tension

Non-linear vibrations of axially moving beam with time-dependent tension are investigated in this paper. The beam material is modelled as three-parameter Zener element. The Galerkin method and the fourth order Runge-Kutta method are used to solve the governing non-linear partial-differential equation. The effects of the transport speed, the tension perturbation amplitude and the internal damping on the dynamic behaviour of the system are numerically investigated. The Poincare maps and bifurcation diagrams are constructed to classify the vibrations. For small values of the transport speed and the amplitude of periodic perturbation the system is asymptotically stable with its response tending to zero. With the increase of parameters one can observe the coexistence of attractors. Regular and chaotic motion occur when the internal damping increases.     

Modeling the dynamic behavior of shape memory alloys

The paper studies the single degree of freedom vibration of a rigid mass suspended by a thin-walled shape memory alloy tube under torsional loading. The behavior is analyzed for the cases of quasiplasticity (low temperatures) and pseudoelasticity (high temperatures) on the basis of an improved version of the Müller–Achenbach model. To illustrate the strong hysteresis-induced damping capacity and the non-linear vibration characteristics, both, free and forced vibrations are considered in the first part of the paper. This is done on the basis of an isothermal version of the model, while the second part of the paper focuses on the effect of non-constant temperature caused by the rate-dependent release and absorption of latent heats.     

A finite deformation thermomechanical constitutive model for triple shape polymeric composites based on dual thermal transitions

Shape memory polymers (SMPs) have gained strong research interests recently due to their mechanical action that exploits their capability to fix temporary shapes and recover their permanent shape in response to an environmental stimulus such as heat, electricity, irradiation, moisture or magnetic field, among others. Along with interests in conventional “dual-shape” SMPs that can recover from one temporary shape to the permanent shape, multi-shape SMPs that can fix more than one temporary shapes and recover sequentially from one temporary shape to another and eventually to the permanent shape, have started to attract increasing attention. Two approaches have been used to achieve multi-shape shape memory effects (m-SMEs). The first approach uses polymers with a wide thermal transition temperature whilst the second method employs multiple thermal transition temperatures, most notably, uses two distinct thermal transition temperatures to obtain triple-shape memory effects (t-SMEs). Recently, one of the authors’ group reported a triple-shape polymeric composite (TSPC), which is composed of an amorphous SMP matrix (epoxy), providing the system the rubber-glass transition to fix one temporary shape, and an interpenetrating crystallizable fiber network (PCL) providing the system the melt-crystal transition to fix the other temporary shape. A one-dimensional (1D) material model developed by the authors revealed the underlying shape memory mechanism of shape memory behaviors due to dual thermal transitions. In this paper, a three-dimension (3D) finite deformation thermomechanical constitutive model is presented to enable the simulations of t-SME under more complicated deformation conditions. Simple experiments, such as uniaxial tensions, thermal expansions and stress relaxation tests were carried out to identify parameters used in the model. Using an implemented user material subroutine (UMAT), the constitutive model successfully reproduced different types of shape memory behaviors exhibited in experiments designed for shape memory behaviors. Stress distribution analyses were performed to analyze the stress distribution during those different shape memory behaviors. The model was also able to simulate complicated applications, such as a twisted sheet and a folded stick, to demonstrate t-SME.     

A theoretical model of reversible adhesion in shape memory surface relief structures and its application in transfer printing

Transfer printing is an important and versatile tool for deterministic assembly and integration of micro/nanomaterials on unusual substrates, with promising applications in fabrication of stretchable and flexible electronics. The shape memory polymers (SMP) with triangular surface relief structures are introduced to achieve large, reversible adhesion, thereby with potential applications in temperature-controlled transfer printing. An analytic model is established, and it identifies two mechanisms to increase the adhesion: (1) transition of contact mode from the triangular to trapezoidal configurations, and (2) explicit enhancement in the contact area. The surface relief structures are optimized to achieve reversible adhesion and transfer printing. The theoretical model and results presented can be exploited as design guidelines for future applications of SMP in reversible adhesion and stretchable electronics.