Structure of mixed beta-lactoglobulin/pectin adsorbed layers at air/water interfaces; a spectroscopy study

Based on earlier reported surface rheological behaviour two factors appeared to be important for the functional behaviour of mixed protein/polysaccharide adsorbed layers at air/water interfaces: (1) protein/polysaccharide mixing ratio and (2) formation history of the layers. In this study complexes of beta-lactoglobulin (positively charged at pH 4.5) and low methoxyl pectin (negatively charged) were formed at two mixing ratios, resulting in negatively charged and nearly neutral complexes. Neutron reflection showed that adsorption of negative complexes leads to more diffuse layers at the air/water interface than adsorption of neutral complexes. Besides (simultaneous) adsorption of protein/polysaccharide complexes, a mixed layer can also be formed by adsorption of (protein/)polysaccharide (complexes) to a pre-formed protein layer (sequential adsorption). Despite similar bulk concentrations, adsorbed layer density profiles of simultaneously and sequentially formed layers were persistently different, as illustrated by neutron reflection analysis. Time resolved fluorescence anisotropy showed that the mobility of protein molecules at an air/water interface is hampered by the presence of pectin. This hampered mobility of protein through a complex layer could account for differences observed in density profiles of simultaneously and sequentially formed layers. These insights substantiated the previously proposed organisations of the different adsorbed layers based on surface rheological data.     

Interfacial rheological studies of gelatin-sodium dodecyl sulfate complexes adsorbed at the air-water interface

The dilational rheological behavior of gelatin molecules adsorbed at the air-water interface has been studied as a function of sodium dodecyl sulfate (SDS) concentration for a 7 wt % gelatin-SDS solution at 40 degrees C. Binding of SDS molecules to the gelatin strands disrupts the cross-linked network structure of adsorbed gelatin molecules and results in a reduction of the surface elastic modulus of the adsorbed layer that continues until the bulk SDS concentration reaches 1 mM. Beyond this SDS concentration, the dilational rheological properties of the adsorbed gelatin layer are indistinguishable from those of pure SDS adsorbed layers.     

Polysaccharide/Surfactant complexes at the air-water interface - effect of the charge density on interfacial and foaming behaviors

The binding of a cationic surfactant (hexadecyltrimethylammonium bromide, CTAB) to a negatively charged natural polysaccharide (pectin) at air-solution interfaces was investigated on single interfaces and in foams, versus the linear charge densities of the polysaccharide. Besides classical methods to investigate polymer/surfactant systems, we applied, for the first time concerning these systems, the analogy between the small angle neutron scattering by foams and the neutron reflectivity of films to measure in situ film thicknesses of foams. CTAB/pectin foam films are much thicker than the pure surfactant foam film but similar for high- and low-charged pectin/CTAB systems despite the difference in structure of complexes at interfaces. The improvement of the foam properties of CTAB bound to pectin is shown to be directly related to the formation of pectin-CTAB complexes at the air-water interface. However, in opposition to surface activity, there is no specific behavior for the highly charged pectin: foam properties depend mainly upon the bulk charge concentration, while the interfacial behavior is mainly governed by the charge density of pectin. For the highly charged pectin, specific cooperative effects between neighboring charged sites along the chain are thought to be involved in the higher surface activity of pectin/CTAB complexes. A more general behavior can be obtained at lower charge density either by using a low-charged pectin or by neutralizing the highly charged pectin in decreasing pH.     

Polysaccharide charge density regulating protein adsorption to air/water interfaces by protein/polysaccharide complex formation

Because the formation of protein/polysaccharide complexes is dominated by electrostatic interaction, polysaccharide charge density is expected to play a major role in the adsorption behavior of the complexes. In this study, pullulan (a non-charged polysaccharide) carboxylated to four different charge densities (fraction of carboxylated subunits: 0.1, 0.26, 0.51, and 0.56) was used to investigate the effect of charge density on the properties of mixed protein/polysaccharide adsorbed layers at air/water interfaces. With all pullulan samples, soluble complexes with beta-lactoglobulin could be formed at low ionic strength, pH 4.5. It was shown that the higher was the pullulan charge density, the more the increase of surface pressure in time was retarded as compared to that for pure beta-lactoglobulin. The retardation was even more pronounced for the development of the dilatational modulus. The lower dilatational modulus can be explained by the ability of the polysaccharides to prevent the formation of a compact protein layer at the air/water interface due to electrostatic repulsion. This ability of the polysaccharides to prevent "layer compactness" increases with the net negative charge of the complexes. If charge density is sufficient (> or = 0.26), polysaccharides may enhance the cohesion between complexes within the adsorbed layer. The charge density of polysaccharides is shown to be a dominant regulator of both the adsorption kinetics as well as the resulting surface rheological behavior of the mixed layers formed. These findings have significant value for the application of complex protein-polysaccharide systems.     

Interfacial rheology of mixed layers of food proteins and surfactants

Mixed protein–surfactant adsorption layers at liquid interfaces are described including the thermodynamic basis, the adsorption kinetics and the shear and dilational interfacial rheology. It is shown that due to the protrusion of hydrophobic protein parts into the oil phase the adsorption layers at the water–hexane interface are stronger anchored as compared to the water-air surface. Based on the different adsorption protocols, a sequential and a simultaneous scheme, the peculiarities of complexes between proteins and added surfactants are shown when formed in the solution bulk or at a liquid interface. The picture drawn from adsorption studies is supported by the findings of interfacial rheology.     

Thermodynamics, adsorption kinetics and rheology of mixed protein-surfactant interfacial layers

Depending on the bulk composition, adsorption layers formed from mixed protein/surfactant solutions contain different amounts of protein. Clearly, increasing amounts of surfactant should decrease the amount of adsorbed proteins successively. However, due to the much larger adsorption energy, proteins are rather strongly bound to the interface and via competitive adsorption surfactants cannot easily displace proteins. A thermodynamic theory was developed recently which describes the composition of mixed protein/surfactant adsorption layers. This theory is based on models for the single compounds and allows a prognosis of the resulting mixed layers by using the characteristic parameters of the involved components. This thermodynamic theory serves also as the respective boundary condition for the dynamics of adsorption layers formed from mixed solutions and their dilational rheological behaviour. Based on experimental studies with milk proteins (β-casein and β-lactoglobulin) mixed with non-ionic (decyl and dodecyl dimethyl phosphine oxide) and ionic (sodium dodecyl sulphate and dodecyl trimethyl ammonium bromide) surfactants at the water/air and water/hexane interfaces, the potential of the theoretical tools is demonstrated.The displacement of pre-adsorbed proteins by subsequently added surfactant can be successfully studied by a special experimental technique based on a drop volume exchange. In this way the drop profile analysis can provide tensiometry and dilational rheology data (via drop oscillation experiments) for two adsorption routes — sequential adsorption of the single compounds in addition to the traditional simultaneous adsorption from a mixed solution. Complementary measurements of the surface shear rheology and the adsorption layer thickness via ellipsometry are added in order to support the proposed mechanisms drawn from tensiometry and dilational rheology, i.e. to show that the formation of mixed adsorption layer is based on a modification of the protein molecules via electrostatic (ionic) and/or hydrophobic interactions by the surfactant molecules and a competitive adsorption of the resulting complexes with the free, unbound surfactant. Under certain conditions, the properties of the sequentially formed layers differ from those formed simultaneously, which can be explained by the different locations of complex formation.     

Adsorbed Layers of Ferritin at Solid and Fluid Interfaces Studied by Atomic Force Microscopy

The adsorption of the iron storage protein ferritin was studied by liquid tapping mode atomic force microscopy in order to obtain molecular resolution in the adsorbed layer within the aqueous environment in which the adsorption was carried out. The surface coverage and the structure of the adsorbed layer were investigated as functions of ionic strength and pH on two different charged surfaces, namely chemically modified glass slides and mixed surfactant films at the air-water interface, which were transferred to graphite substrates after adsorption. Surface coverage trends with both ionic strength and pH indicate the dominance of electrostatic effects, with the balance shifting between intermolecular repulsion and protein-surface attraction. The resulting behavior is more complex than that seen for larger colloidal particles, which appear to follow a modified random sequential adsorption model monotonically. The structure of the adsorbed layers at the solid surfaces is random, but some indication of long-range order is apparent at fluid interfaces, presumably due to the higher protein mobility at the fluid interface. Copyright 2000 Academic Press.     

Amphiphilic derivatives of dextran: adsorption at air/water and oil/water interfaces

Ionic amphiphilic dextran derivatives were synthesized by the attachment of sodium sulfopropyl and phenoxy groups on the native polysaccharide. A family of dextran derivatives was thus obtained with varying hydrophobic content and charge density in the polymer chains. The surface-active properties of polymers were studied at the air-water and dodecane-water interfaces using dynamic surface/interfacial tension measurements. The adsorption was shown to begin in a diffusion-limited regime at low polymer concentrations, that is to say, with the diffusion of macromolecules in the bulk solution. In contrast, at long times the interfacial adsorption is limited by interfacial phenomena: adsorption kinetics or transfer into the adsorbed layer. A semiempirical equation developed by Filippov was shown to correctly fit the experimental curves over the whole time range. The presence of ionic groups in the chains strongly lowers the adsorption kinetics. This effect can be interpreted by electrostatic interactions between the free molecules and the already adsorbed ones. The adsorption kinetics at air-water and oil-water interfaces are compared.     

Structure and mechanical properties of a polyglycerol ester at the air-water surface

We studied the structure and mechanical properties of surface films resulting from the adsorption of a dispersed L beta phase at the air-water interface. This L beta phase corresponds to multilamellar vesicles and is formed by a commercial polyglycerol fatty acid ester (PGE) in aqueous solution at temperatures below the main chain-melting temperature (Tm=58 degrees C). We measured the adsorption kinetics using the pendant drop technique and mechanical properties of PGE films using oscillatory surface shear and dilatational rheometric methods. Though the adsorption kinetics are very slow, we show that the L beta phase of PGE is surface-active and forms viscoelastic films at the air-water surface after sufficiently long adsorption times. The rheological response functions to shear and dilatational deformation are reminiscent of those of temporary networks, indicating an intermolecular connectivity at the surface. This temporary network is probably created by hydrophobic interactions of alkyl chains. We obtained more detailed information about the properties of this network by comparing the rheological signature of an adsorbed PGE film (unknown structure) with a solvent-spread monolayer (known structure). We characterized the structural features of spread PGE films by recording the Langmuir isotherm and Brewster angle micrographs (BAM).We show that the rheological responses of the adsorbed film and the solvent-spread monolayer are very close to each other, indicating a structural similarity. From this study, we conclude that a dispersed L beta phase of PGE is able to adsorb at the air-water surface at T相似文献   

Interfacial shear rheology of protein-surfactant layers

The shear rheology of adsorbed or spread layers at air/liquid and liquid/liquid phase boundaries is relevant in a wide range of technical applications such as mass transfer, monolayers, foaming, emulsification, oil recovery, or high speed coating. Interfacial shear rheological properties can provide important information about interactions and molecular structure in the interfacial layer. A variety of measuring techniques have been proposed in the literature to measure interfacial shear rheological properties and have been applied to pure protein or mixed protein adsorption layers at air/water or oil/water interfaces. Such systems play for example an important role as stabilizers in foams and emulsions. The aim of this contribution is to give a literature overview of interfacial shear rheological studies of pure protein and protein/surfactant mixtures at liquid interfaces measured with different techniques. Techniques which utilize the damping of waves, spectroscopic or AFM techniques and all micro-rheological techniques will not discuss here.     

Modulation of the adsorption properties at air-water interfaces of complexes of egg white ovalbumin with pectin by the dielectric constant

The possibility of modulating the mesoscopic properties of food colloidal systems by the dielectric constant is studied by determining the impact of small amounts of ethanol (10%) on the adsorption of egg white ovalbumin onto the air-water interface in the absence and presence of pectin. The adsorption kinetics was monitored using tensiometry. The addition of ethanol resulted in considerably slower adsorption of the protein onto the interface, and this effect was enhanced when the protein was in complex with the pectin. Time-resolved fluorescence measurements demonstrated that in the case of noncomplexed ovalbumin the addition of ethanol resulted in a more condensed protein surface layer where ovalbumin adopted a preferred orientation at the interface. In contrast, the effect of ethanol on the ovalbumin-pectin complex suggested a pronounced multipoint electrostatic interaction between protein and polyelectrolyte and the formation of a more rigid spatial arrangement within the complex, thereby leading to suppressed protein-protein interactions. From this work it is concluded that by the enhanced binding affinity between ovalbumin and pectin a strong effect on the adsorption properties of the protein can be accomplished. This work does therefore illustrate how solvent quality can be exploited effectively to enhance or suppress protein functional behavior in complex applications containing air-water interfaces.     

The adsorption and unfolding kinetics determines the folding state of proteins at the air-water interface and thereby the equation of state

Unfolding of proteins has often been mentioned as an important factor during the adsorption process at air-water interfaces and in the increase of surface pressure at later stages of the adsorption process. This work focuses on the question whether the folding state of the adsorbed protein depends on the rate of adsorption to the interface, which can be controlled by bulk concentration. Therefore, the adsorption of proteins with varying structural stabilities at several protein concentrations was studied using ellipsometry and surface tensiometry. For beta-lactoglobulin the adsorbed amount (Gamma) needed to reach a certain surface pressure (Pi) decreased with decreasing bulk concentration. Ovalbumin showed no such dependence. To verify whether this difference in behavior is caused by the difference in structural stability, similar experiments were performed with cytochrome c and a destabilized variant of this protein. Both proteins showed identical Pi-Gamma, and no dependence on bulk concentration. From this work it was concluded that unfolding will only take place if the kinetics of adsorption is similar or slower than the kinetics of unfolding. The latter depends on the activation energy of unfolding (which is in the order of 100-300 kJ/mol), rather than the free energy of unfolding (typically 10-50 kJ/mol).     

Molecular details of ovalbumin-pectin complexes at the air/water interface: a spectroscopic study

To stabilize air-water interfaces, as in foams, the adsorption of surface-active components is a prerequisite. An approach to controlling the surface activity of proteins is noncovalent complex formation with a polyelectrolyte in the bulk phase. The molecular properties of egg white ovalbumin in a complex with pectin in the bulk solution and at air/water interfaces were studied using drop tensiometry (ADT) and time-resolved fluorescence anisotropy techniques. The complex formation of ovalbumin with pectin in the bulk resulted in the formation of a compact structure with a different spatial arrangement depending on the protein/pectin ratio. Complex formation did not provide an altered protein structure, whereas the conformational stability was slightly increased in the complex. In excess pectin, an overall condensed complex structure is formed, whereas at limited pectin concentrations the structure of the complex is more "segmental". The characteristics of these structures did not depend on pH in the 7.0 to 4.5 regime. Interaction with pectin in the bulk solution resulted in a significantly slower adsorption of the protein to the air/water interface. The limited mobility of the protein at the interface was found for both ovalbumin and ovalbumin-pectin complexes. From both the rotational dynamics and total fluorescence properties of the protein in the absence and presence of pectin, it was suggested that the complex does not dissociate at the interface. Ovalbumin in the complex retains its initial "aqueous" microenvironment at the interface, whereas in the absence of pectin the microenvironment of the protein changed to a more nonpolar one. This work illustrates a more general property of polyelectrolytes, namely, the ability to retain a protein in its microenvironment. Insight into this property provides a new tool for better control of the surface activity of complex biopolymer systems.     

Dilatational rheology of beta-casein adsorbed layers at liquid-fluid interfaces

The rheological behavior of beta-casein adsorption layers formed at the air-water and tetradecane-water interfaces is studied in detail by means of pendant drop tensiometry. First, its adsorption behavior is briefly summarized at both interfaces, experimentally and also theoretically. Subsequently, the experimental dilatational results obtained for a wide range of frequencies are presented for both interfaces. An interesting dependence with the oscillation frequency is observed via the comparative analysis of the interfacial elasticity (storage part) and the interfacial viscosity (loss part) for the two interfaces. The analysis of the interfacial elasticities provides information on the conformational transitions undergone by the protein upon adsorption at both interfaces. The air-water interface shows a complex behavior in which two maxima merge into one as the frequency increases, whereas only a single maximum is found at the tetradecane interface within the range of frequencies studied. This is interpreted in terms of a decisive interaction between the oil and the protein molecules. Furthermore, the analysis of the interfacial viscosities provides information on the relaxation processes occurring at both interfaces. Similarly, substantial differences arise between the gaseous and liquid interfaces and various possible relaxation mechanisms are discussed. Finally, the experimental elasticities obtained for frequencies higher than 0.1 Hz are further analyzed on the basis of a thermodynamic model. Accordingly, the nature of the conformational transition given by the maximum at these frequencies is discussed in terms of different theoretical considerations. The formation of a protein bilayer at the interface or the limited compressibility of the protein in the adsorbed state are regarded as possible explanations of the maximum.     

Milk protein interfacial layers and the relationship to emulsion stability and rheology

The properties of milk protein-stabilised, oil-in-water emulsions are determined by the structure and surface rheology of the adsorbed layer at the oil-water interface. Analysis of the segment density profiles normal to the surface show differences in the structure between adsorbed layers of disordered casein and globular whey protein. Systematic studies of stability and rheology of model oil-in-water emulsion systems made with milk proteins as sole emulsifiers give insight into the relation between adsorbed layer properties and bulk emulsion stability. Of particular importance are effects of pH, temperature, calcium ions and protein content. Colloidal interactions between adsorbed layers on different surfaces can be inferred from an analysis of dynamic collisions of protein-coated emulsion droplets in shear flow using the colloidal particle scattering technique. The role of competitive adsorption on emulsion properties can be derived from experiments on systems containing mixtures of milk proteins and small-molecule surfactants. Shear-induced destabilisation is especially influenced by the presence of fat crystals in the emulsion droplets. Aggregated gel network properties are dependent on the balance of weak and strong interparticle interactions. In heat-set whey protein emulsion gels, the rheological behaviour is especially sensitive to surfactant type and concentration. Rearrangements of transient caseinate-based emulsion gels can have a profound influence on the quiesent stability behaviour. Computer simulation provides a general link between particle interactions, microstructure and rheological properties.     

Mechanical properties of protein adsorption layers at the air/water and oil/water interface: A comparison in light of the thermodynamical stability of proteins

Over the last decades numerous studies on the interfacial rheological response of protein adsorption layers have been published. The comparison of these studies and the retrieval of a common parameter to compare protein interfacial activity are hampered by the fact that different boundary conditions (e.g. physico-chemical, instrumental, interfacial) were used. In the present work we review previous studies and attempt a unifying approach for the comparison between bulk protein properties and their adsorption films. Among many common food grade proteins we chose bovine serum albumin, β-lactoglobulin and lysozyme for their difference in thermodynamic stability and studied their adsorption at the air/water and limonene/water interface. In order to achieve this we have i) systematically analyzed protein adsorption kinetics in terms of surface pressure rise using a drop profile analysis tensiometer and ii) we addressed the interfacial layer properties under shear stress using an interfacial shear rheometer under the same experimental conditions. We could show that thermodynamically less stable proteins adsorb generally faster and yield films with higher shear rheological properties at air/water interface. The same proteins showed an analog behavior when adsorbing at the limonene/water interface but at slower rates.     

Dynamic properties of soy globulin adsorbed films at the air-water interface

In this paper we present surface dilatational properties of soy globulins (beta-conglycinin, glycinin, and reduced glycinin with 10 mM of dithiothreitol (DTT)) adsorbed onto the air-water interface, as a function of adsorption time. The experiments were performed at constant temperature (20 degrees C), pH (8.0), and ionic strength (0.05 M). The surface rheological parameters were measured as a function of protein concentration (ranging from 1 to 1x10(-3)% wt/wt). We found that the surface dilatational modulus, E, increases, and the phase angle, phi, decreases with time, theta, which may be associated with protein adsorption. These phenomena have been related to protein adsorption, unfolding, and/or protein-protein interactions (at long-term adsorption) as a function of protein concentration in solution. From a rheological point of view, the surface viscoelastic characteristics of soy globulin films adsorbed at the air-water interface are practically elastic. The main conclusion is that the dilatational properties of the adsorbed films depend on the molecular structure of the protein.     

Modification of beta-lactoglobulin by oligofructose: impact on protein adsorption at the air-water interface

Maillard products of beta-lactoglobulin (betaLg) and fructose oligosaccharide (FOS) were obtained in different degrees of modification depending on incubation time and pH. By use of a variety of biochemical and spectroscopic tools, it was demonstrated that the modification at limited degrees does not significantly affect the secondary, tertiary, and quaternary structure of betaLg. The consequence of the modification on the thermodynamics of the protein was studied using differential scanning calorimetry, circular dichroism, and by monitoring the fluorescence intensity of protein samples with different concentrations of guanidine-HCl. The modification leads to lowering of the denaturation temperature by 5 degrees C and a reduction of the free energy of stabilization of about 30%. Ellipsometry and drop tensiometry demonstrated that upon adsorption to air-water interfaces in equilibrium modified betaLg exerts a lower surface pressure than native betaLg (16 versus 22 mN/m). Moreover, the surface elastic modulus increased with increasing surface pressure but reached significantly smaller values in the case of FOS-betaLg. Compared to native betaLg, modification of the protein with oligofructose moieties results in higher surface loads and thicker surface layers. The consequences of these altered surface rheological properties are discussed in view of the functional behavior in technological applications.     

Surface rheology of PEO-PPO-PEO triblock copolymers at the air-water interface: comparison of spread and adsorbed layers

The dilatational rheological properties of monolayers of poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide)-type block copolymers at the air-water interface have been investigated by employing an oscillating ring trough method. The properties of adsorbed monolayers were compared to spread layers over a range of surface concentrations. The studied polymers were PEO26-PPO39-PEO26 (P85), PEO103-PPO40-PEO103 (F88), and PEO99-PPO65-PEO99 (F127). Thus, two of the polymers have similar PPO block size and two of them have similar PEO block size, which allows us to draw conclusions about the relationship between molecular structure and surface dilatational rheology. The dilatational properties of adsorbed monolayers were investigated as a function of time and bulk solution concentration. The time dependence was found to be rather complex, reflecting structural changes in the layer. When the dilatational modulus measured at different concentrations was replotted as a function of surface pressure, one unique master curve was obtained for each polymer. It was found that the dilatational behavior of spread (Langmuir) and adsorbed (Gibbs) monolayers of the same polymer is close to identical up to surface concentrations of approximately 0.7 mg/m2. At higher coverage, the properties are qualitatively alike with respect to dilatational modulus, although some differences are noticeable. Relaxation processes take place mainly within the interfacial layers by a redistribution of polymer segments. Several conformational transitions were shown to occur as the area per molecule decreased. PEO desorbs significantly from the interface at segmental areas below 20 A(2), while at higher surface coverage, we propose that segments of PPO are forced to leave the interface to form a mixed sublayer in the aqueous region.     

短链烷基对多取代烷基苯磺酸盐界面性质的影响

利用悬挂滴方法研究了2,5-二乙基-4-壬基苯磺酸钠(292)、2,5-二丙基-4-壬基苯磺酸钠(393)和2,5-二丁基-4-壬基苯磺酸钠(494)在空气-水表面和正癸烷-水界面的扩张流变性质,考察了时间、界面压、工作频率及体相浓度对扩张弹性和粘性的影响。研究发现,在低表面活性剂浓度条件下,表面吸附膜类似弹性膜,其强度由膜内分子的相互作用决定;高浓度下体相与表面间的扩散交换过程控制表面膜的性质。油分子的插入导致界面吸附分子之间相互作用的削弱,扩散交换过程主导界面膜性质;但随着短链烷基长度增加,油分子的影响变小。表面膜的强度在吸附达到平衡前已经决定,而界面膜在吸附饱和后仍然随界面分子重排而变化。