Volumetric and transport properties of aerosol-OT reversed micelles containing light and heavy water

Densities and viscosities of sodium bis(2-ethylhexyl) sulfosuccinate (AOT in-heptane system containing light and heavy water, as a function of the molar ratio R (R=[H₂O or D₂O]/[AOT]) were measured at 0, 5, 25 and 40°C. At low R values, the apparent molar volume of deuterium oxide is smaller than that of light water. The difference is related to the strength of the hydrogen bonding H₂O and D₂O. The viscosities of both H₂O-AOT-n-heptane and D₂O-AOT-n-heptane systems were explained in terms of intermicellar interactions mainly governed by hydration of the head groups of AOT.     

Effect of the Constrained Environment on the Interactions between the Surfactant and Different Polar Solvents Encapsulated within AOT Reverse Micelles

Herein, we report a study of the interactions between different nonaqueous polar solvents, namely, ethylene glycol (EG), propylene glycol (PG), glycerol (GY), dimethylformamide (DMF), and dimethylacetamide (DMA), and the polar heads of sodium 1,4‐bis‐2‐ethylhexylsulfosuccinate (AOT) in nonaqueous AOT/n‐heptane reverse micelles. The goal of our study is to gain insights into the unique reverse‐micelle microenvironment created upon encapsulation of these polar solvents. For the first time, the study is focused on determining which regions of the AOT molecular structure are involved in the interactions with the polar solvents. We use FTIR spectroscopy—a noninvasive technique—to follow the changes in the AOT C?O band and the symmetric and asymmetric SO₃^? vibration modes upon increasing the content of polar solvents in the micelles. The results show that GY interacts through H bonds with the SO₃^? group, thereby removing the Na⁺ counterions from the interface remaining in the polar core of the micelles. PG and EG interact through H bonds, mainly with the C?O group of AOT, penetrating into the oil side of the interface. Thus, they interact weakly with the Na⁺ counterion, which seems to be close to the AOT sulfonate group. Finally, DMF and DMA, encapsulated inside the reverse micelles, interact neither with the C?O nor with the SO₃^? groups, but their weakly bulk‐associated structure is broken because of the interactions with Na⁺. We suggest that DMF and DMA can complex the Na⁺ ions through their carbonyl and nitrogen groups. Hence, our results do not only give insights into how the constrained environment affects the bulk properties of polar solvents encapsulated within reverse micelles but—more importantly—they also help us to answer the tricky question about which regions of the AOT moiety are involved in the interactions with the polar solvents. We believe that our results show a clear picture of the interactions present at the nonaqueous reverse‐micelle interface; this is important because these media are interesting nanoreactors for heterogeneous chemistry, templates for nanoparticles, and models for membranes.     

Activity and kinetics studies of yeast alcohol dehydrogenase in a reverse micelle formulated from functional surfactants

Yeast alcohol dehydrogenase (YADH) showed substantial decrease in its catalytic activity due to the strong electrostatic interaction between the head groups of sodium bis(2-ethylhexyl) sulfosuccinate (AOT) and YADH in AOT reverse micelles. However, the catalytic activity of YADH in a nonionic reverse micellar interface (GGDE/TX-100) obtained from a functional nonionic surfactant N-gluconyl glutamic acid didecyl ester (GGDE) and Triton X-100 (TX-100) was higher than that in AOT reverse micelle under the respective optimum conditions. A comparison of the kinetic parameters showed that the turnover number k_cat in GGDE/TX-100 reverse micelle was 1.4 times as large as that in AOT reverse micelle, but the Michaelis constants in AOT reverse micelle for ethanol K_m^B was twice and for coenzyme NAD⁺ K_m^A was 5 times higher than their counterparts in GGDE/TX-100 reverse micelle. For the conversion of ethanol, the smaller K_m^B and larger k_cat in GGDE/TX-100 reverse micelle resulted in higher catalytic efficiency k_cat/K_m^B. The stability of YADH in GGDE/TX-100 reverse micelle was also found to be better than that in AOT reverse micelle. They were mainly attributed to the absence of electric charge on the head groups of GGDE and TX-100 in the GGDE/TX-100 reverse micelle.      

Thermodynamic Parameters of Solvation and Complexing of Copper(II) Nitrate and Nickel(II) Nitrate in Water + Acetamide Mixtures at 298.15 K

The heats of mixing of aqueous solutions of copper(II) or nickel(II) nitrate in water + acetamide (AA) mixtures in the existing range of amide concentrations have been studied. A rise in the amide concentration enhances solvation more strongly in copper(II) salt solutions. Data are analyzed with reference to previous results on the enthalpies of transfer of the salts studied in water + formamide (FA) and water + N,N-dimethylformamide (DMF) mixtures. Electronic absorbance spectra have been recorded at a fixed electrolyte concentration for all thermochemically studied systems, and a linear correlation has been found between the enthalpy of transfer of Cu(NO₃)₂ and the optical density of the solution. The enhanced solvation of copper(II) nitrate in aqueous acetamide is due to inner-sphere interactions between the cation and acetamide; that of nickel(II) nitrate is more due to outer-sphere interactions.     

Monitoring Glycan–Protein Interactions by NMR Spectroscopic Analysis: A Simple Chemical Tag That Mimics Natural CH–π Interactions

Detection of molecular recognition processes requires robust, specific, and easily implementable sensing methods, especially for screening applications. Here, we propose the difluoroacetamide moiety (an acetamide bioisoster) as a novel tag for detecting by NMR analysis those glycan–protein interactions that involve N‐acetylated sugars. Although difluoroacetamide has been used previously as a substituent in medicinal chemistry, here we employ it as a specific sensor to monitor interactions between GlcNAc‐containing glycans and a model lectin (wheat germ agglutinin). In contrast to the widely employed trifluoroacetamide group, the difluoroacetamide tag contains geminal ¹H and ¹⁹F atoms that allow both ¹H and ¹⁹F NMR methods for easy and robust detection of molecular recognition processes involving GlcNAc‐ (or GalNAc‐) moieties over a range of binding affinities. The CHF₂CONH‐ moiety behaves in a manner that is very similar to that of the natural acetamide fragment in the involved aromatic‐sugar interactions, providing analogous binding energy and conformations, whereas the perfluorinated CF₃CONH‐ analogue differs more significantly.     

Hydrogen Bonds of Peptide Group in Four Acetamide Derivatives: DFT Study of Oxygen and Nitrogen NQR and NMR Parameters

A computational study was conducted to examine hydrogen bond (HB) properties of peptide group in four derivatives of acetamide by density functional theory (DFT) calculations of nuclear quadrupole resonance (NQR) and nuclear magnetic resonance (NMR) parameters at the sites of oxygen and nitrogen nuclei of peptide groups. The available crystalline structures of four derivatives; 2,2,2-trifluoro-N-(2-hydroxy-5-nitrophenyl)acetamide, N-(2-acetylphenyl)acetamide, 2-chloro-N-(4-nitrophenyl) acetamide, and N-(4-fluorophenyl)acetamide were obtained from literature. Following the influence of HB interactions, calculations were done on non-hydrogen bonded (single) and hydrogen bonded (cluster) models of derivatives. The results revealed different behaviors of peptide group in contributing to HB interactions in different derivative structures. HB interactions are the strongest in 2-chloro-N-(4-nitrophenyl)acetamide. However, the strengths of HB interactions in all of the four derivatives are still less than that of acetamide. The calculations are done at the level of B3LYP method and 6-311++G** standard basis set using GAUSSIAN 98 package of program.     

Properties of Fluids Composed of Polyelectrolyte and Double-Chain Anionic Surfactant: Branched Polyethyleneimine and Sodium bis(2-ethylhexyl) Sulfosuccinate

The properties of fluids composed of branched polyethyleneimine (PEI) and sodium bis(2-ethylhexyl)sulfosuccinate (AOT) were investigated by steady-state fluorescence, dynamic light scattering, turbidity, conductivity, and pH measurements. Light scattering studies show that addition of PEI into AOT solution can significantly decrease the aggregate size of AOT, however, the aggregate volume of AOT/PEI complexes slightly changes with the [AOT] or [PEI]. ¹H NMR spectroscopy measurements show the line shape and chemical shifts of the protons around the head of AOT severely change with increase of [PEI] or [AOT]. It indicates that the interaction of AOT and PEI mainly occurs around the head of AOT.     

Hydrogen‐bond patterns in the congruent complex 4‐nitrophenol–acetamide (1/1)

Fusion of 4‐nitrophenol and acetamide in a 1:1 molar ratio gives the title product, C₆H₅NO₃·C₂H₅NO, (III), which has the character of a pure covalently bonded compound, having a high sharp melting point. Complex (III) (m.p. 371.9–372.9 K) can be recrystallized from various solvents and forms eutectics with either acetamide or 4‐nitrophenol. Similar fusion of mixtures of acetamide and 2‐nitrophenol yields no complex similar to (III) and mixtures of acetamide and 3‐nitrophenol produce only a weak low‐melting complex. The significance of this study lies in its demonstration, via graph set analysis, that some of the patterns found individually in crystalline acetamide or 4‐nitrophenol have been preserved in crystals of complex (III), while several higher order graph sets are produced in (III) due to new hydrogen bonds involving the nitro group. In particular, large hydrogen‐bonded rings are formed together with helical chains.     

水介质中药物-AOT混合物的温度依赖的混合胶束化行为(英文)

The mixed micellization behavior of an amphiphilic antidepressant drug amitriptyline hydrochloride(AMT)in the presence of the conventional anionic surfactant sodium bis(2-ethylhexyl)sulfosuccinate(AOT)was studied at five different temperatures and compositions by the conductometric technique.The critical micelle concentration(cmc)and critical micelle concentration at the ideal state(cmcid)values show mixed micelle formation between the components(i.e.,drug and AOT).The micellar mole fractions of the AOT(X1)values calculated using the Rubingh,Motomura,and Rodenas models show a higher contribution of AOT in the mixed micelles.The interaction parameter(β)is negative at all temperatures and the compositions show attractive interactions between the components.The activity coefficients(f1and f2)calculated using the different proposed models are always less than unity indicating non-ideality in the systems.TheΔGmΘ values were found to be negative for all the binary mixed systems.However,ΔHmΘ values for the pure drug as well as the drug-AOT mixed systems are negative at lower temperatures(293.15-303.15 K)and positive at higher temperatures(308.15 K and above).TheΔSmΘ values are positive at all temperatures but their magnitude was higher at T=308.15 K and above.The excess free energy of mixing(ΔGex)determined using the different proposed models also explains the stability of the mixed micelles compared to the pure drug(AMT)and surfactant micelles.     

Precipitation of slightly soluble silver salts in reversed AOT micelles: Calorimetric investigation

The enthalpies of precipitation, of AgCl, Agl, Ag₂S and silver tetraphenylborate (AgTPB) in water containing reversed sodium bis(2-ethylhexyl) sulfosuccinate (AOT) micelles as a function of the molar concentration ratio R (R=[water]/[AOT]) at various concentrations of AOT and reagent salts, were measured by a calorimetric technique. The molar enthalpies of precipitation are independent of the surfactant concentration but are dependent on the concentration of the reagent salts and the R value. The molar enthalpies for the same processes in bulk water are not approached even at the highest R value. Effects due to the smallness of the microcrystals and to the interactions between ions and micellar interface are discussed. In part from Doctor of Biology thesis of F. Pinio, University of Palermo, Italy.     

Photon-correlation spectroscopy applied to the size characterization of water-in-oil microemulsion systems stabilized by Aerosol-OT; effect of change in counterion

The technique of photon-correlation spectroscopy and its application to the determination of the size of micro-droplets of water dispersed in an oil phase is described. The phase behaviour of ternary systems formed by M²⁺ (AOT)₂/water/cyclohexane is reported (where M²⁺ = Mg²⁺ and Ni²⁺) and compared with the corresponding Na(AOT) phase diagram. Diffusion coefficients of the aggregate structures have been determined by PCS and in combination with data from other techniques, the structure and interactions of the aggregate system in the water-in-oil microemulsion domain can be described.     

VINYL RADICAL POLYMERIZATION INITIATED WITH CERIC ION AND N-(SUBSTITUTED PHENYL) ACETAMIDE SYSTEMS

The polymerization of acrylamide (AAM)in H_2O/DMF or in H_2O/CH_3CN mixed solvent initiated with ceric ion (Ce~(4+) )/N-(substituted phenyl)-acetamide systems have been studied. The redox polymerization was revealed by the low value of overall activation energy (E_α) of AAM polymerization using ceric ion/N-(substituted phenyl) acetamide system as an initiator. The end group of polymer formed was detected by IR spectrum analysis method, it revealed the presence of N-(m-acetoxy-methylphenyl) acetamide (m-AAe) moiety end group in the polymer obtained with ceric ion/m-AAe initiation system.     

Refractive index of water-AOT-n-heptane microemulsions

Refractive index measurements on water/AOT/n-heptane microemulsions as a function of the volume fraction of the dispersed phase (water plus AOT) and of the water/AOT molar ratio R have been performed at 25°C. The refractive index was found to vary monotonically with without any change in rate during the crossover of the percolation threshold. Such a behavior suggested that, well above the percolation threshold, the water-AOT-n-heptane microemulsions are still formed by water-containing AOT reversed micelles dispersed in the oil phase. The analysis of the experimental data allowed an evaluation the fraction of the water molecules bonded to the AOT head group as a function of R.     

SPECTROSCOPIC AND DYNAMIC CHARACTERIZATION OF FMN IN REVERSED MICELLES ENTRAPPED WATER POOLS

Abstract— The encapsulation of FMN in surfactant entrapped water pools resulted into specific interactions of FMN with the polar head groups, the entrapped water molecules and the outer apolar solvent. Two positively charged surfactant/solvent systems were employed: dodecyl ammonium propionate (DAP) in toluene and hexadecyltrimethylammonium bromide (CTAB) in chloroform/ n -octane (6:5, vol/vol). Also a surfactant with a negatively charged polar head group, sodium bis (2-ethylhexyl) sulfosuccinate (AOT) in n -octane, was used. In CTAB and especially DAP reversed micellar systems the light absorption spectra revealed the localization of the flavin in a more apolar environment, while in AOT reversed micelles FMN appeared to reside mainly in the core of the water pool. The fluorescence spectra showed unresolved bands, which were blue-shifted in DAP and CTAB reversed micelles as compared to the spectra of aqueous FMN solutions. The fluorescence decay kinetics of FMN in enclosed water droplets is non-exponential. The heterogeneity can be explained assuming incomplete relaxation of partly immobilized water molecules during the lifetime of the excited singlet state. The relatively high anisotropy of the fluorescence of FMN in encapsulated water indicated a higher viscosity than in bulk water. This was confirmed by anisotropy decay measurements of FMN in DAP and AOT entrapped water, for which the rotational correlation times were much longer than for FMN in plain water.     

Amino and Acetamide Functional Group Effects on the Ionization and Fragmentation of Sugar Chains in Positive-Ion Mass Spectrometry

To elucidate the influence of amino (-NH₂) and acetamide (-NHCOCH₃, -NAc) groups in sugar chains on their ionization and fragmentation, cycloamyloses (cyclodextrins, CyDs) and lacto-oligosaccharide are analyzed by MALDI TOF/TOF and ESI Q-TOF mass spectrometry. CyD derivatives substituted by amino or acetamide groups are ideal analytes to extract the function group effects, which are amino-CyD with one hexosamine (HexNH₂) and acetamide-CyD with one N-acetyl hexosamine (HexNAc). Interestingly, the relative ion intensities and isotope-like patterns in their product ion spectra depend on the functional groups and ion forms of sugar chains. Consequently, the results indicate that a proton (H⁺) localizes on the amino group of the amino sugar, and that the proton (H⁺) induces their fragmentation. Sodium cation (Na⁺) attachment is independent from amino group and exerts no influence on their fragmentation patterns in amino group except for mono- and disaccharide fragment ions because there is the possibility of the reducing end effect. In contrast, a sodium cation localizes much more frequently on the acetamide group in acetamide-CyDs because the chemical species with HexNAc are stable. Thus, their ions with HexNAc are abundant. These results are consistent with the fragmentation of lacto-neo-N-tetraose and maltotetraose, suggesting that a sodium cation generally localizes much more frequently on the acetamide group in sugar chains.

Kinetics of the Oxidation of Phenylhydrazine by [Fe(CN)6]3− in Water‐in‐Oil Microemulsions

The oxidation reaction of phenyl hydrazine (Phh) by hexacyanoferrate ([Fe(CN)₆]^3?) has been studied in water‐in‐oil (w/o) microemulsion media. The kinetic profile of the reaction was investigated as a function of [Phh], droplet size, and droplet concentration. Comparison of the kinetic profiles of the reaction in microemulsion, water‐urea, and water‐AOT‐urea media indicates that the kinetic profile of the reaction in microemulsion shows a behavior similar to that of the reaction in water‐AOT‐urea medium at 4 M urea. An initial increase and then a decrease in k_obs is observed with increasing molar ratio, W_o(=[H₂O]/[AOT]) at constant [AOT] (=0.4 M), whereas k_obs decreases upon increasing the AOT concentration at constant molar ratio.     

Temperature-induced percolation behavior of AOT reverse micelles affected by poly(ethylene glycol)s

The influence of poly(ethylene glycol)s additives viz. mono- (EG), di- (DEG), tri- (TEG), tetra- (TeEG) and poly(ethylene glycol)-400 (PEG-400) on temperature-induced electrical percolation of water/AOT/isooctane microemulsion system has been investigated. The composition of microemulsion systems has been kept constant to omega=22 and [additive] = 0.1 M w.r.t. dispersion medium. The effect of increase in the non-polar continuum (S= [Oil]/[AOT]) is indicated by increase in the percolation threshold, theta(c). The findings have been elaborated in terms of validity of scaling laws in the light of the dynamic percolation theory. The activation energy of the process, DeltaEp, has been estimated from Arrhenius plots. Pseudophase concept of the micellar aggregation has been utilized to assess the thermodynamics of clustering of the nanodroplets. The state of trapped water in the micellar core and the corresponding interactions with the AOT head group has been visualized through 1H NMR and FTIR analysis. Results show that at higher omega (>16.0), encapsulated water behaves like free or the bulk water.     

Supra-aggregates

Mixtures of oil (isooctane), water, and a double-chained ionic surfactant, Cu(AOT)_2, [copper(II) bis(2-ethylhexyl)sulfosuccinate] form equilibrium phases consisting of spontaneous emulsions thermodynamically stable systems. The experimental conditions are such that the head polar group of the surfactant is totally hydrated. The emulsion droplets are comprised of supra aggregates, lamellar spherulites in which interior and exterior are bicontinuous microemulsions. The microstructures and component ratios can be predicted from elementary considerations that require only the notion of local and global packing constraints. The phenomenon of supra aggregation, microphases within any topologically closed container, in equilibrium with an external phase, appears quite general. The results throw some light on the meaning of ‘phase’ in mesostructured fluids.     

Physicochemical investigation of the solubilization of ytterbium nitrate in AOT reverse micelles and liquid crystals

A wide investigation of the solubilization of the water-soluble salt Yb(NO₃)₃ in sodium bis(2-ethylhexyl)sulfosuccinate (AOT) reverse micelles and AOT liquid crystals has been carried out. After saturation of water/AOT/organic solvent w/o microemulsions with pure Yb(NO₃)₃, the Yb(NO₃)₃/AOT composites were prepared by complete evaporation under vacuum of the volatile components (water and organic solvent) of the salt-containing microemulsions. It was observed that these composites can be totally dissolved in pure n-heptane or CCl₄, allowing the solubilization of a noticeable amount of Yb(NO₃)₃ in quite dry apolar media. By UV–vis–NIR, FT-IR, and ¹H NMR spectroscopies, some information on the state of Yb(NO₃)₃ within AOT reverse micelles were acquired, whereas by small angle X-ray scattering (SAXS), it has been ascertained that Yb(NO₃)₃ is quite homogeneously distributed as very small clusters among the reverse micelles. An analysis of SAXS and wide-angle X-ray scattering spectra of Yb(NO₃)₃/AOT composites leads to the hypothesis that, also in these systems, Yb(NO₃)₃ is dispersed in the surfactant matrix as very small clusters.     

FT-IR Investigation of the State of Iron(III) Chloride Clusters Confined in AOT Reverse Micelles Dispersed in Carbon Tetrachloride

The state of the water-soluble salt iron(III) chloride in AOT reverse micelles dispersed in carbon tetrachloride has been investigated by FT-IR spectroscopy. Interestingly, while the entrapment of a lot of water-soluble inorganic salts in AOT reverse micelles requires preliminarily the presence of significant amounts of water within the micellar core, solubilization of FeCl₃ occurs without the need to add water in the micellar solution reaching the very high solubility value, expressed as the maximum salt-to-surfactant molar ratio, of 1.30. The analysis of the spectral features of the investigated samples leads to hypothesize that iron(III) chloride is confined within the reverse micellar core as small size melted clusters of ionic species arising from the reactions