ICP-AES versus (LA-)IPC-MS: Competition or a happy marriage? – A view supported by current data

An assessment of the practical implementation of several spectroscopic analysis methods in the analytical service department of the reserach laboratory of a large electronic industry is provided. The emphasis is on inductively coupled plasma atomic emission spectrometry (ICP-AES), inductively coupled plasma mass spectrometry (ICP-MS), and laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS). The evolution of these methods in the department in recent years and their present position in the light of the analysis requests is introductory discussed. A “preview” assessment of the methods in terms of their strong and weak points then forms the basis for a subsequent discussion in which representative examples are used to illustrate in detail why in a particular situation a particular method is applied as the preferred one. It is concluded that ICP-AES is the most rugged and flexible, and therefore the most often applied method, while ICP-MS is uniquely suitable for ultra-trace and survey analysis of solutions and LA-ICP-MS is uniquely suitable for direct solids and local analysis. The ultimate conclusion is that neither of the three methods alone can answer all the analytical questions: they supplement and complement each other, and may even require supplementation by classical analytical methods.     

Determination of trace impurities in electronic grade quartz: Comparison of inductively coupled plasma mass spectroscopy with other analytical techniques

An analytical procedure for the determination of uranium and thorium in the sub-ng/g range as well as of other trace elements in the ng/g to g/g range in high purity quartz samples is described. The results obtained by inductively coupled plasma mass spectroscopy (ICP-MS) are compared to those obtained by other analytical techniques (instrumental neutron activation analysis, INAA; flame atomic absorption spectrometry, AAS; Zeeman graphite furnace atomic absorption spectrometry, ZGFAAS; total reflection X-ray fluorescence analysis, TRFA; direct current arc optical emission spectrometry, DC-arc OES; and X-ray fluorescence analysis, XRFA). For the ICP-MS measurements, the decomposition of the samples is carried out with HF/HNO₃/H₂SO₄-mixtures. The results obtained by the different methods show reasonable agreement. For uranium and thorium, ICP-MS proves to be the most sensitive method: detection limits of about 50 pg/g can be achieved for both elements.Presented in part at the 1989 European Winter Conference on Plasma Spectrochemistry, Reutte, Austria     

Analysis of germanium and germanium dioxide samples by mass-spectrometry and atomic emission spectroscopy

Three multielement methods: (1) inductively coupled plasma mass spectrometry (ICP-MS), (2) inductively coupled plasma atomic emission spectroscopy (ICP-AES), and (3) spark source mass spectrometry (SSMS) were used for the determination of additives in the samples of germanium and germanium oxide. The detection limits of direct SSMS and ICP-AES/ICP-MS were compared using the autoclave predissolution of germanium and germanium dioxide samples. It was shown that in the latter case, the detection limits could be significantly improved by the separation of germanium from analytes by distillation. In this case, the detection limits of such limiting elements like Th and U can reach the level n 10^?10 wt %.     

Determination of metals in biofluids and tissues: sample preparation methods for atomic spectroscopic techniques

Several sample preparation methods unique to each instrumental technique exist for the elemental analysis of biological specimens, but no review or book has dealt with them. The present review is an attempt to fill this void and focuses on sample preparation methods unique to atomic and X-ray spectroscopic techniques. The techniques covered are: flame and electrothermal AAS, inductively coupled plasma atomic emission spectrometry (ICP-AES), inductively coupled plasma mass spectrometry (ICP-MS) and X-ray fluorescence spectrometry (XRF) since these are most commonly used in trace element analysis of biological materials. The intent is not to present the procedural details for the various tissues or elements, but rather to highlight the methods which are unique to each instrument. The bibliography accompanying this review should aid the analytical chemist in his/her search for the detailed preparation protocols.     

Accurate determination of lead in wines by inductively coupled plasma mass spectrometry

Summary The capability of inductively coupled plasma mass spectrometry (ICP-MS) for Pb determinations in wine samples is studied. An evaluation is made of the signal behaviour in aqueous ethanolic medium. The effect of preliminary sample preparation on signal suppression or enhancement is investigated in conjunction with the ability of internal standardization to correct for it. As a result, an accurate and precise method of analysis is described in which the sample preparation is limited to a 10-fold dilution and external calibration is applied for quantitation. A detection limit of 0.2 g 1^–1 Pb in wine is achieved. The Pb content of ten different wines was found to range around 40 g 1^–1 with extreme values of 1.63 and 58.8 g 1^–1.     

Mass spectrometric analysis of ceramic components for solid oxide fuel cells

For the determination of trace impurities in ceramic components of solid oxide fuel cells (SOFCs), some mass spectrometric methods have been applied such as spark source mass spectrometry (SSMS), laser ionization mass spectrometry (LIMS), laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) and inductively coupled plasma mass spectrometry (ICP-MS). Due to a lack of suitable standard reference materials for quantifying of analytical results on La _x Sr _y MnO₃ cathode material a matrix-matched synthetic standard-high purity initial compounds doped with trace elements-was prepared in order to determine the relative sensitivity coefficients in SSMS and LA-ICP-MS. Radiofrequency glow discharge mass spectrometry (rf-GDMS) was developed for trace analysis and depth profiling of thick non-conducting layers. Surface analytical techniques, such as secondary ion mass spectrometry (SIMS) and sputtered neutral mass spectrometry (SNMS), were used to determine the element distribution on surfaces (homogeneity) and the surface contaminants of SOFC ceramic layers.Dedicated to Professor Dr. rer. nat. Hubertus Nickel on the occasion of his 65th birthday     

土壤中铅的分析方法比对

对不同的样品消解方法及电感耦合等离子体质谱、电感耦合等离子体原子发射光谱、石墨炉原子吸收光谱法测定土壤中铅的测定结果进行比对。采用电热板、微波及水浴3种加热方式,选择硝酸、氢氟酸、双氧水、王水、高氯酸、盐酸的不同组合进行土壤样品消解,通过分析测定值的精密度和准确度,考察消解体系对电感耦合等离子体质谱、电感耦合等离子体发射光谱、石墨炉原子吸收光谱法测定结果的影响。结果表明采用电感耦合等离子体质谱法测定土壤中的铅,最适宜的消解体系是硝酸-氢氟酸-高氯酸(微波加热),采用电感耦合等离子体原子发射光谱法测定最适宜的消解体系是硝酸(电热板加热),采用石墨炉原子吸收光谱法测定最适宜的消解体系是硝酸-盐酸-高氯酸(微波加热)。电感耦合等离子体质谱法的精密度和准确度优于另外两种方法。     

Determination of trace metals in hydrothermal calcites by ICP-methods

Lanthanum, cerium, and europium in calcites from carbonate-sulfide banded ores were determined by standard addition using inductively coupled plasma mass spectrometry (ICP-MS). The concentration ranges in solution were for La 700-36 ng/g, Ce 2000-149 ng/g, and for Eu 140-2.4 ng/g. Only Ce was determined by both ICP methods, and the results agree within 3 to 4%. In a second step, a scan over the mass range of the rare earth elements (REE) was performed. The solutions were analyzed directly without applying preconcentration or separation procedures. ICP atomic emission spectrometry (AES) was used to determine Ca, Mn, and Fe. The matrix Ca is present in a concentration range from 1600 to 1300 g/g and the major impurities Mn and Fe are 152-32 and 100-28 g/g, respectively. The detection limits of ICP-MS for REE are found to be better by two orders of magnitude than for ICP-AES. A commercially available SCIEX Elan ICP-MS with additional software was used to make mathematical corrections for isobaric interferences and molecular ions.Presented in part at the 1989 European Winter Conference on Plasma Spectrochemistry, Reutte, Austria     

A comparison of INAA and ICP-MS/ICP-AES methods for the analysis of meteorite samples

Instrumental neutron activation analysis (INAA), inductively coupled plasma atomic emission spectrometry (ICP-AES) and ICP mass spectrometry (ICP-MS) (hereafter, ICPs) were applied to meteorite samples for the determination of elemental content. The analytical applicability and suitability of the three methods have been compared. Those comparisons led to the refinement of our analytical procedures for INAA and ICPs, yielding more reliable data. Our INAA data proved to be reliable enough for classifying meteorites, while the ICPs, especially ICP-MS, can characterize elemental abundance features in detail, as demonstrated by REE abundance patterns for the Allende meteorite. In this manner, INAA and ICPs can be used in a complementary fashion in cosmochemical studies.     

Determination of Heavy Metals in Soils, Sediments and Geological Materials by ICP-AES and ICP-MS

 Sixteen soil and sedimentary geological reference materials were analysed for As and the heavy metals Cd, Co, Cr, Cu, Ni, Pb and Zn by inductively coupled plasma-atomic emission spectrometry (ICP-AES) and inductively coupled plasma-mass spectrometry (ICP-MS) in combination with total and partial dissolution of the samples. It can be demonstrated that none of the modern ICP methods is completely free from analytical problems. This applies in particular when the concentrations are close to the detection limits (e.g. in ICP-AES) and is mainly due to the wide variation in the bulk composition of soils resulting in complex matrix effects (e.g. in ICP-MS). In order to determine the extent of soil pollution by heavy metals, both partial and total dissolution have to be performed prior to analysis.