Measurement of isotope ratios on transient signals by MC-ICP–MS

Precise and accurate isotope ratio measurements are an important task in many applications such as isotope-dilution mass spectrometry, bioavailability studies, or the determination of isotope variations in geological or nuclear samples. The technique of MC-ICP–MS has attracted much attention because it permits the precise measurement of isotope compositions for a wide range of elements combined with excellent detection limits due to high ionisation efficiencies. However, the results are based mainly on measurements using continuous sample introduction. In the present study the determination of isotope ratios on various transient signals with a time duration of 30 to 60 s has been achieved by coupling high-performance liquid chromatography to a multicollector inductively coupled plasma mass spectrometer. In order to investigate the origin of ratio drifts across the transient signals for this hyphenated technique, measurements with the same standard solutions were also carried out using a flow-injection device for sample introduction. As a result of this application it could be concluded that the main source of the bias in the measured isotope ratios is within the ICP–MS instead of fractionation effects on the chromatographic column material. Preliminary studies on short transient signals of gaseous samples (dry plasma) showed a reverse fractionation effect compared with wet plasma conditions (flow injection and HPLC).Presented at the 2003 European Winter Conference on Plasma Spectrochemistry, Garmisch-Partenkirchen, Germany, January 2003     

Determination of uranium in urine – measurement of isotope ratios and quantification by use of inductively coupled plasma mass spectrometry

For analysis of uranium in urine determination of the isotope ratio and quantification were investigated by high-resolution inductively coupled plasma mass spectrometry (HR ICP-MS). The instrument used (ThermoFinniganMAT ELEMENT2) is a single-collector MS and, therefore, a stable sample-introduction system was chosen. The methodical set-up was optimized to achieve the best precision for both the isotope ratio and the total uranium concentration in the urine matrix.Three spiked urine samples from an European interlaboratory comparison were analyzed to determine the (235)U/(238)U isotope ratio. The ratio was found to be in the range 0.002116 to 0.007222, the latter being the natural uranium isotope ratio. The first ratio indicates the abundance of depleted uranium.The effect of storage conditions and the stability for the matrix urine were investigated by using "real-life" urine samples from unexposed persons in the Netherlands. For samples stored under refrigeration and acidified the results (range 0.8 to 5.3 ng L(-1) U) were in the normal fluctuation range whereas a decrease in uranium concentration was observed for samples stored at room temperature without acidification.     

Speciation analysis of chromium in drinking water samples by ion-pair reversed-phase HPLC–ICP-MS: validation of the analytical method and evaluation of the uncertainty budget

The approach presented in this article refers to the modification of a method for the detection and quantitative determination of chromium species in water by high-performance liquid chromatography inductively coupled plasma mass spectrometry. The main aim of this work was to establish a detailed validation of the analytical procedure and an estimation of the budget of measurement uncertainty which was helpful in recognizing the critical points of the presented method. As a result of the method validation experiment, the obtained limit of quantification, repeatability and intermediate precision were satisfied for the quantification Cr(III) and Cr(VI) in water matrices. The trueness of the method was verified via an estimation of the recovery of the spiked real samples. The recovery rate of both determined analytes was found to be between 93 and 115 %. Considering that the validation of the method and the evaluation of measurement uncertainty are crucial for quantitative analysis, the above-mentioned assessment of the uncertainty budget was performed in two different ways: a modelling approach and a single-laboratory validation approach. The measurement uncertainties of the results were found to be 4.4 and 7.8 % for Cr(III), 4.2 and 7.9 % for Cr(VI) using the classical concept and method validation data, respectively. This paper is the first publication to presenting all the steps needed to evaluate the measurement uncertainty for the speciation analysis of chromium species. In summary, the obtained results demonstrate that the method can be applied effectively for its intended use.     

Effect of Ionic Strength and Temperature on the Protonation of Oxidized Glutathione

The protonation constants for oxidized glutathione, H _i−1L^(4−i+1)−, K _i ^H=[H _i L⁽⁴⁻ⁱ⁾⁻]/[H _i−1L^(4−i+1)−][H⁺] i=1,2,…,6 have been measured at 5, 25 and 45 °C as a function of the ionic strength (0.1 to 5.4 mol⋅[kg(H₂O)]⁻¹) in NaCl solutions. The effect of ionic strength on the measured protonation constants has been used to determine the thermodynamic values (K _i ^H0) and the enthalpy (ΔH _i ) for the dissociation reaction using the SIT model and Pitzer equations. The SIT (ε) and Pitzer parameters (β ⁽⁰⁾, β ⁽¹⁾ and C) for the dissociation products (L⁴⁻, HL³⁻, H₂L²⁻, H₃L⁻, H₄L, H₅L⁺, H₆L²⁺) have been determined as a function of temperature. These results can be used to examine the effect of ionic strength and temperature on glutathione in aqueous solutions with NaCl as the major component (body fluids, seawater and brines).     

The impact of measurement uncertainty on the producer’s and user’s risks, on classification and conformity assessment: an example based on tests on some construction products

The reliability of test results and subsequent classification statements or product certification depend on the variability of the product’s properties and on the validity of the test procedures used. With an emphasis on measurement uncertainty, producer’s and user’s risks as well as probabilities of conformance, conformity and classification are calculated exemplarily for two requirements for mineral aggregates used in construction. An important methodological basis is an international draft document on measurement uncertainty in conformity assessment. The mathematical instruments given are applied and further developed to a risk scenario for product classification. The results from a classification point of view show that the reliability of test results for acid-soluble sulphates is mostly acceptable and both the producer’s and user’s risks are quite small. In contrast, the magnesium sulphate index test produces results which are hardly usable for classification and certification purposes or for risk management in production. Product certification bodies should generally have an appropriate approach when dealing with results where precision data are poor.     

The isomeric ratios in photonuclear reactions of natural strontium induced by bremsstrahlungs in the giant dipole resonance region and by 65 MeV bremsstrahlung

We have determined the isomeric ratio of ^85m,gSr in photonuclear reactions of natural strontium induced by bremsstrahlungs with end-point energies in the giant dipole resonance (GDR) region as well as the isomeric ratios of ^85m,gSr and ^84m,gRb produced at 65 MeV bremsstrahlung. In GDR region the target was irradiated at electron accelerator Microtron MT-25 of the Flerov Laboratory of Nuclear Reaction, Joint Institute for Nuclear Research, Dubna, Russia. The target irradiation with 65 MeV bremsstrahlung was performed at the linear electron accelerator of the Pohang Neutron Facility, Pohang, South Korea. The gamma spectra of the samples irradiated in both cases were measured with spectroscopic systems consisting of 8192 channel analyzer and high-energy resolution (180 keV at gamma ray 1332 keV of ⁶⁰Co) HP(Ge) semiconductor detector Canberra. The GENIE2000 (Canberra) computer program was used for data processing. The results were discussed and compared with those of other authors.     

Study on the Synergism Effect of Lomefloxacin and Ofloxacin for Bovine Serum Albumin in Solution by Spectroscopic Techniques

Both lomefloxacin (LOM) and ofloxacin (OFL) have a powerful ability to quench the fluorescence of bovine serum albumin (BSA). The fluorescence quenching action is much stronger when the two drugs coexist. The synergism between LOM and OFL was studied using fluorescence and ultraviolet spectroscopy under imitated physiological conditions. The results show that static quenching and non-radiation energy transfer are the main reasons for the fluorescence quenching. The synergism results in both the reduction of the binding stability between drugs and BSA and an increase of the free drug concentration, which will increase the efficacy of drugs. The thermodynamic parameters at different temperatures were calculated and the binding distances r between the drugs and BSA were obtained based on Försters theory of non-radiation energy transfer. The synchronous fluorescence spectra indicated that the effect of synergism affected the conformation of BSA.     

Mechanism of the dimerization of enzymes upon adsorption on silicate adsorbents using the example of lysozyme and β-galactosidase

It is shown by the kinetic analysis of lysozyme and β-galactosidase adsorption on silochrome, silica gel, and mesoporous silica that the adsorption follows a two-stage scheme, including reversible pre-adsorption and the irreversible binding of dimmers. The corresponding rate constants of adsorption, desorption, and dimerization were calculated. It was found that β-galoctosidase adsorbed on silica gel and mesoporous silica retained ∼20% of its activity, while β-galoctosidase adsorbed on silochrome retained more than 30% of its activity.     

Pressure and isotope effects on the proton jump of the hydroxide ion at 25°C

The limiting molar conductances Λ⁰ of potassium deuteroxide KOD in D₂O and potassium hydroxide KOH in H₂O were determined at 25°C as a function of pressure to disclose the difference in the proton-jump mechanism between an OH^? (OD^?) and a H₃O⁺ (D₃O⁺) ion. The excess conductance of the OD^? ion in D₂O λ _E ^O (OD ^-), as estimated by the equation $$\lambda _E^O (OD^ - ) = \Lambda ^O (KOD/D_2 O) - \Lambda ^O (KCl/D_2 O)$$ increases a little with pressure as well as the excess conductance of the OH^? ion in H₂O $$\lambda _E^O (OH^ - ) = \Lambda ^O (KOH/H_2 O) - \Lambda ^O (KCl/H_2 O)$$ However, their rates of increase with pressure are much smaller than those of the excess deuteron and proton conductances, λ _E ^O (D ⁺) and λ _E ^O (H ⁺). With respect to the isotope effect on the excess conductance, λ _E ^O (OH ^-)/λ _E ^O (D ⁺) decreases with presure as in the case of λ _E ^O (H ⁺)/λ _E ^O (D ⁺), but the value of λ _E ^O (OH ^-)/λ _E ^O (OD ^-) itself is much larger than that of λ _E ^O (H ⁺)/λ _E ^O (D ⁺) at each pressure. These results are ascribed to the difference in the pre-rotation of water molecules, which is brought about by the difference in the intial orientation of the rotating water molecule adjacent to the OH^? (OD^?) or the H₃O⁺ (D₃O⁺) ion.     

Evaluation of measurement uncertainty in the elemental analysis of sintered silicon carbide using laser ablation in liquid—inductively coupled plasma mass spectrometry with external calibration and isotope dilution

Accreditation and Quality Assurance - The goal of this study was to evaluate the uncertainty of elemental analytical methods that use laser ablation in liquid (LAL) as a pretreatment. After LAL...     

Statistical quantification of the influence of material properties on the oxidation and ignition of activated carbons

The influence of material properties on the reactivities of activated carbon materials have been studied on a laboratory scale. Carbon samples having diversified origin and properties were characterized using a thermogravimetry (TG) coupled with a differential scanning calorimetry (DSC). Reactivity parameters like the Point of Initial Oxidation (PIO) representing the beginning of the oxidation reactions and the Spontaneous Ignition Temperature (SIT) where the bed combustion takes place in a self sustaining manner were experimentally determined. The intrinsic properties of the activated carbons influencing oxidation and ignition were examined qualitatively followed by quantitative statistical correlations. Results from both qualitative and statistical correlations showed that increase in the oxygen content in the form of surface oxygenated groups increased the reactivity of activated carbons. It was by far the single most influential property discriminated from the analysis. The porosity characteristics like the specific surface area and pore volume did show some vague trends but could not be validated like that of the oxygen content. The effects of these individual properties on the oxidation and ignition reactivity are discussed.     

Oxidative Condensation of Methane on Sr2 –xLaxTiO4 Catalysts: Effect of the Degree of Substitution of Sr and La

Kinetics and Catalysis - The Sr2 –xLaxTiO4 (x = 0–2.0) catalysts were synthesized based on strontium titanate with a layered perovskite structure. The effect of the degree of...     

Cross-validation and evaluation of the performance of methods for the elemental analysis of forensic glass by μ-XRF, ICP-MS, and LA-ICP-MS

Elemental analysis of glass was conducted by 16 forensic science laboratories, providing a direct comparison between three analytical methods [micro-x-ray fluorescence spectroscopy (μ-XRF), solution analysis using inductively coupled plasma mass spectrometry (ICP-MS), and laser ablation inductively coupled plasma mass spectrometry]. Interlaboratory studies using glass standard reference materials and other glass samples were designed to (a) evaluate the analytical performance between different laboratories using the same method, (b) evaluate the analytical performance of the different methods, (c) evaluate the capabilities of the methods to correctly associate glass that originated from the same source and to correctly discriminate glass samples that do not share the same source, and (d) standardize the methods of analysis and interpretation of results. Reference materials NIST 612, NIST 1831, FGS 1, and FGS 2 were employed to cross-validate these sensitive techniques and to optimize and standardize the analytical protocols. The resulting figures of merit for the ICP-MS methods include repeatability better than 5 % RSD, reproducibility between laboratories better than 10 % RSD, bias better than 10 %, and limits of detection between 0.03 and 9 μg g^?1 for the majority of the elements monitored. The figures of merit for the μ-XRF methods include repeatability better than 11 % RSD, reproducibility between laboratories after normalization of the data better than 16 % RSD, and limits of detection between 5.8 and 7,400 μg g^?1. The results from this study also compare the analytical performance of different forensic science laboratories conducting elemental analysis of glass evidence fragments using the three analytical methods.

Optimizing the separation of gaseous enantiomers by simulated moving bed and pressure swing adsorption

The resolution of racemic gas mixtures by simulated moving bed (SMB) and pressure swing adsorption (PSA) is investigated by dynamic simulation and optimization. Enantiomer separation of inhalation anesthetics is important because there is evidence that the purified enantiomers may have different pharmacological properties than the racemate. The model parameters reported in an experimental investigation performed elsewhere are used to study the feasibility of this separation using SMB and PSA configurations. Both processes were modeled in gPROMS^® as systems of differential algebraic equations. Operating conditions are optimized such that the feed throughput and product recovery for each process were maximized subject to equal constraints on the pressures and superficial gas velocities. SMB was found to be capable of resolving racemic feed mixtures with purity and recovery exceeding 99%. On the other hand, PSA was also able to provide a single purified enantiomer with low recovery of about 30% which may limit its application to enantiomer separation. Nevertheless, PSA consumes less desorbent, and achieves higher throughput at the sacrifice of lower recovery.     

Effect of the Charge and the Nature of Both Cations and Anions on the Solubility of Zwitterionic Amino Acids,Measurements and Modeling

The effect of the charge and the nature of both the cations and the anions of some electrolytic salts: sodium fluoride (NaF), potassium fluoride (KF), sodium bromide (NaBr), potassium bromide (KBr), sodium iodide (NaI), potassium iodide (KI), sodium sulfate (Na₂SO₄), potassium sulfate (K₂SO₄), calcium chloride (CaCl₂), and barium chloride (BaCl₂), on the solubility of zwitterionic amino acids (glycine, DL-alanine, DL-valine, and DL-serine) in aqueous solutions at 298.15 K are studied and discussed. A salting-in effect is observed for all amino acids under investigation with all electrolytes used in the present study, except for DL-alanine and DL-valine in aqueous solutions containing sodium fluoride where a salting-out effect was observed. The orders of the effect of the nature and the charge of both the anions and the cations are: F^- < Cl^- < Br^- < I^- < NO₃^- < SO₄^2-\mathrm{F}^{-}<{}\mathrm{Cl}^{-}<{}\mathrm{Br}^{-}<{}\mathrm{I}^{-}<\mathrm{NO}_{3}^{-}<{}\mathrm{SO}_{4}^{2-} with both sodium and potassium cations; Na⁺<K⁺<Ca²⁺<Ba²⁺ with chloride anion.     

Study on the Regulation of Diorganogermanium Compounds on the Maillard Reaction of Histidine and Glycine by Fluorescence Spectrum

TheMaillardreactioncomprisesoftwostages,earlyandadvanced.AminoacidsorproteinsreactwithglucosetoformastableAmadoricproductthroughSchiffbaseadducts,whichareconverted,uponfurtherincubation,toadvancedglycosylationendproducts(AGE)withafluorescentorbrownproperty'.Ge-132((GeCHZCHZCOOH)O3Q)caninhibittheMaillardreactioneffectively'.Inthispaper,weinvestigatetheearlystagesoftheMaillardreactionofHisandGlyunderphysiologicalconditionsinwhichthenuorescentpropertyisthemostimportantcharacter.Theregul…     

Evaluation of Bioeffects of a Long-term Administering ChangLe on Rat by Proton NMR Method and BIochemical Examination

High resolution ¹H nuclear magnetic resonance (NMR) spectroscopy has been employed to assess long‐term toxicological effects of ChangLe (a kind of rare earth complex applied in agriculture). Male Wistar rats were administrated orally with ChangLe at doses of 0, 0.1, 0.2, 2.0, 10 and 20 mg/kg body weight daily, respectively, for 6 months. Urine was collected at day 30, 60, 90 and serum samples were taken after 6 months. Many low‐molecular weight metabolites were identified by ¹H NMR spectra of rat urine. A decrease in citrate and an increase in ketone bodies, creatinine, DMA, DMG, TMAO, and taurine in the urine of the rats receiving high doses were found by ¹H NMR spectra. These may mean that high‐dosage of ChangLe impairs the specific region of liver and kidney, such as renal tubule and mitochondria. The decrease in citrate and the increase in succinate and α‐ketoglutarate were attributed to a combination of the inhibition of certain citric acid enzymes, renal tubular acidosis and the abnormal fatty acid catabolism. The information of the renal capillary necrosis could be derived from the increase in DMA, DMG and TMAO. The increase in taurine was due to hepatic mitochondria dysfunction. The conclusions were supported by the results of biochemical measurements and enzymatic assay. No obviously toxicological effects on metabolism were found for low‐dosage ChangLe, but further studies on safety of ChangLe applied to agriculture are still required.     

Evaluation of 500 keV proton irradiation of bilayer graphene on SiC by the use of SRIM code, a Monte Carlo simulation method for stopping and range of ions in matter

Graphene is experienced its golden age in the world of nanotechnology. Despite the fact that it takes key roles in the very complex areas, it is a simple two-dimensional material which is formed by only carbon atoms with a honeycomb form on especially another material. Graphene monolayer is usually supported by a known SiC substrate. SiC is a valuable material for both electronics and nuclear researches because of the excellent shielding and conduction properties. We simulated 500 keV proton irradiation effects on bilayer graphene on SiC by SRIM code in this paper. SRIM is a very detailed code capable of modeling ranging from very thick materials to single layer structures. This code is based on sending ions with specific energy to a target material. We presented damages and displacements caused by 500 keV protons to bilayer graphene/SiC target in the view of promising face of space and solar cell technology.