On chromium direct ETAAS determination in serum and urine

A simple, accurate and reliable method for direct electrothermal atomic absorption spectrometric (ETAAS) determination of chromium in serum and urine samples without any preliminary sample pretreatment is described. Instrumental parameters are optimized in order to define: the most suitable atomizer, optimal temperature program and efficient modifier. An appropriate quantification method is proposed taking into account a matrix interference study. Pyrocoated graphite tubes and wall atomization, pretreatment temperature of 700 °C, atomization temperature of 2600 °C, hydrogen peroxide as modifier and standard addition calibration are recommended. The accuracy of the method proposed for Cr determination in serum and urine was confirmed by comparative analysis of parallel samples after wet or dry ashing as well as by the analysis of two certified reference materials: Serum, Clin Rep 1 and Lypochek Urine, level 1. The detection and determination limits achieved for both matrices are 0.08 μg/L and 0.15 μg/L respectively. The relative standard deviation varied between 15 and 18 % for the chromium content in the samples in the range 0.08–0.2 μg/L and between 4 and 7 % for the chromium content in the range 0.2–2.0 μg/L for both matrices.      

Continuous flow-injection-atomic absorption spectrometric method for the determination of Ondansetron

A flow-injection procedure for the indirect determination of the new drug Ondansetron is proposed. The method is based on the reaction of the drug in an oxidative solid-phase reactor included in the flow assembly. The reactor was made by lead dioxide physically entrapped by polymerization; the released lead(II) was monitored by atomic absorption spectrometry at 217.0 nm. The procedure gave a linear calibration graph up to 20 μg ml⁻¹ of Ondansetron with a sample throughput of 338 samples h⁻¹.     

Extraction and determination of hexavalent chromium in soil samples

A procedure for the extraction of Cr(VI) from solid soil-like samples was presented in which the complexing properties of diethylenetriaminepentaacetic acid (DTPA) were exploited to extract insoluble compounds of Cr(VI). A concentration of DTPA in an ammonium sulphate/ammonium hydroxide buffer equal to 0.02 mol l⁻¹ was chosen. The conditions of extraction of insoluble Cr(VI) from solid samples were optimised using soil certified reference material spiked with known concentration of insoluble Cr(VI) added as PbCrO₄. The extracts were analysed by adsorptive stripping voltammetry. Validation of the proposed procedure of extraction was carried out by analysis of certified reference material (CRM) 545 and comparison of the results obtained using the proposed and other methods of extraction in the course of analysis of natural soil samples.     

Speciation of hexavalent chromium in waters by liquid-liquid extraction and GFAAS determination

Diperoxo chromium oxide is produced by reaction of hydrogen peroxide on chromium(VI). Diperoxo chromium creates a complex with ethyl acetate, while chromium(III) remains in an unchanged form in the aqueous phase. By this means chromium(VI) can be extracted into ethyl acetate from the aqueous phase. The optimal conditions of Cr(III)-Cr(VI) separation, as well as the chromium content of the ethyl acetate phase were determined with graphite furnace atomic absorption spectrometry. In the second extraction of Cr(VI) from ethyl acetate back into water phase an additional preconcentration of chromium(VI) can be carried out. The detection limit (3σ) of the developed method found to be 200 ng dm^− 3 for the first extraction and 50 ng dm^− 3 after using the twofold extraction. In consequence of the matrix free ethyl acetate phase after the first extraction, with this separation a really extensive preconcentration of chromium(VI) can be realized.     

Laser induced thermal lens spectrometry for cobalt determination after cloud point extraction

A new approach, employing cloud point extraction (CPE) in combination with thermal lens spectrometry (TLS), has been developed for the determination of cobalt. The CPE and TLS methods have good matching conditions for combination because TLS is suitable for low volume samples obtained after CPE and for organic solvents, which are used for dissolving the remaining analyte phase.1-(2-Pyridylazo)-2-naphthol (PAN) was used as a complexing agent and octylphenoxypolyethoxyethanol (Triton X-114) was added as a surfactant; then the pH of solution was adjusted. After phase separation at 50 °C based on the cloud point extraction of the mixture, the surfactant-rich phase was dried and the remaining phase was dissolved using 20 μL of carbon tetrachloride. The obtained solution was introduced into the quartz micro cell and the analyte was determined by thermal lens spectrometry. The He-Ne laser (632.8 nm) was used as both the probe and the excite source.Under optimum conditions, the analytical curve was linear for the concentration range of 0.2-40 ng mL⁻¹ and the detection limit was 0.03 ng mL⁻¹. The enhancement factor of 470 was achieved for a 10 mL sample. Relative standard deviations were lower than 5%.The method was successfully applied to the extraction and determination of cobalt in tap, river and sea water.     

A centrifugal microanalysis system for the determination of nitrite and hexavalent chromium

A centrifugal microanalysis system using spectrophotometric detection has been developed for the determination of nitrite and chromium VI. The system was designed to illustrate the potential of centrifugal microfluidic systems for on-site (field) analysis of waters. The performance was significantly better than manual/visual field test systems and approaches that of bench top systems with detection limits of 0.008 mg L⁻¹ NO₂⁻-N and 0.03 mg L⁻¹ Cr⁶⁺. The system used pre-loaded solid reagents on the disc, providing ease of use, and could process up to 24 samples simultaneously. Precision was enhanced by the use of a multiwavelength ratiometric blank estimation technique.     

Thermal lens investigation of the temperature dependence of the refractive index of organo–aqueous solutions

The thermal lens technique has been used to experimentally determine the temperature of maximum refractive index (TMRi) of low molarity aqueous methanol solutions. The well-known decrease in the measured TMRi is observed with increasing concentration of methanol. At the TMRi, the temperature dependence of refractive index (dn/dT) is zero, resulting in the absence of a thermal lens signal. In this work, the observed changes in the TMRi are related to the changes in the expansion coefficient of the water and to a lesser extent, to changes in the polarisability coefficient of the water. It is also seen that the enhancement in the thermal lens parameter upon the addition of methanol to water is related primarily to the change in expansion coefficient of the aqueous solution.     

Laser induced-thermal lens spectrometry after cloud point extraction for the determination of trace amounts of rhodium

A new combination method, employing thermal lens spectrometry (TLS) after cloud point extraction (CPE), has been developed for the preconcentration and determination of rhodium. TLS and CPE methods have good matching conditions for the combination because TLS is a suitable method for the analysis of low volume samples obtained after CPE.Rhodium was complexed with 1-(2-pyridylazo)-2-naphthol (PAN) as a complexing agent in an aqueous medium and concentrated by octylphenoxypolyethoxyethanol (Triton X-114) as a surfactant. After the phase separation at 50 °C based on the cloud point extraction of the mixture, the surfactant-rich phase was dried and the remaining phase was dissolved using 20 μL of carbon tetrachloride. The obtained solution was introduced into a quartz micro cell and the analyte was determined by laser induced-thermal lens spectrometry (LI-TLS). The single laser TLS was used as a sensitive method for the determination of Rhodium-PAN complex in 20 μL of the sample. Under optimum conditions, the analytical curve was linear for the concentration range of 0.5-50 ng mL⁻¹ and the detection limit was 0.06 ng mL⁻¹. The enhancement factor of 450 was achieved for 10 mL samples containing the analyte and relative standard deviations were lower than 5%. The developed method was successfully applied to the extraction and determination of rhodium in water samples.     

Reduction of hexavalent chromium at solid electrodes in acidic media: reaction mechanism and analytical applications

The electrochemical detection of hexavalent chromium species was investigated. It was found that Cr(VI) can undergo chemically irreversible reduction in acidic solutions at gold, glassy carbon and boron-doped diamond electrodes. The process was found to be diffusionally controlled at all three electrodes studied. The response obtained at a gold electrode towards the reduction of chromium(VI) produced an electrochemically reversible wave in contrast to those recorded at glassy carbon and boron-doped diamond electrodes. The analytical response of the hexavalent species was studied at gold electrodes in the presence of common environmental interferences: Ni²⁺, Cu²⁺, Fe³⁺, Cr³⁺ and Triton X-100 (surfactant), with an LoD of 4.3 μM obtained in the presence of 5 mM Cr(III).     

Extraction system for flame atomic absorption spectrometric analysis of high-purity bismuth compounds

Two new ligands, 2-(2-benzoxazolyl)cyanoacetaldehyde and 2-(2-benzoxazolyl)malonaldehyde are proposed for extractive separation and preconcentration. The extraction behaviour of Ag, Bi, Cd, Co, Cu, Fe, Mn, Mo, Ni, Pb, Pd, Pt, Sb and Zn with respect to pH, salt concentration and the presence of various masking agents was studied. A simple extraction procedure for the analysis of high-purity bismuth compounds was developed.     

Sensitive spectrophotometric determination of aluminium using thermal lens spectrometry

The determination of Al³⁺ in solution using a continuous-wave mode mismatched thermal lens spectrometer is reported and two spectrophotometric procedures are compared. The reagent investigated were bromopyrogallol red—tetradecyltrimethylammonium bromide (BPR—TDTA) and chrome azurol S—cetylpyridinium chloride (CAS—CPC). The CAS—CPC system gave a superior detection limit (0.17 μg 1^?1) to the BPR—TDTA system (1.15 mg 1^?1) owing to the higher reagent blanks and concomitant laser noise in the latter system.     

Determination of chromium(VI) and lead in water samples by on-line sorption preconcentration coupled with flame atomic absorption spectrometry using a PCTFE-beads packed column

A new time-based flow injection on-line solid phase extraction method for chromium(VI) and lead determination using flame atomic absorption spectrometry was developed. The use of hydrophobic poly-chlorotrifluoroethylene (PCTFE)-beads as absorbent in on-line preconcentration system was evaluated. Effective formation of ammonium pyrrolidine dithiocarbamate complexes and subsequently retention in PCTFE packed column, was achieved in pH range 1.0-1.6 and 1.5-3.2 for Cr(VI) and Pb(II) ions, respectively. The sorbed analyte was efficiently eluted with isobutyl-methyl-ketone for on-line FAAS determination. The proposed packing material exhibited excellent chemical and mechanical resistance, fast kinetics for adsorption of Cr(VI) and Pb(II) permitting the use of high sample flow rates at least up to 15 mL min⁻¹ without loss of retention efficiency. For a preconcentration time of 90 s, the sample frequency was 30 h⁻¹, the enhancement factor was 94 and 220, the detection limit was 0.4 and 1.2 μg L⁻¹, while the precision (R.S.D.) was 1.8% (at 5 μg L⁻¹) and 2.1% (at 30 μg L⁻¹) for chromium(VI) and lead, respectively. The applicability and the accuracy of the developed method were estimated by the analysis spiked water samples and certified reference material NIST-CRM 1643d (Trace elements in water) and NIST-SRM 2109 (chromium(VI) speciation in water).     

倾斜交叉差分式激光热透镜光谱法特性研究

本文描述了一个倾斜交叉、差分式激光热透镜光谱法。采用本方法可消除较高的溶剂空白的影响。文章讨论了调制频率和泵浦光功率对热透镜信号的影响,给出了检测Cu~(2+)的工作曲线,讨论了影响方法灵敏度的诸因素,提出了可能的改进方案。     

Atomic absorption spectrometric determination of trace tellurium after hydride trapping on platinum-coated tungsten coil

In this work, a sensitive and simple method for the determination of tellurium was developed by hyphenation of electrically heated quartz tube atomic absorption spectrometry and tellurium hydride trapping on platinum-coated tungsten coil. With a mixture of Ar and H₂, tellurium hydride was transported to tungsten coil for trapping at 390 °C and releasing at 1200 °C. A limit of detection (LOD, 3σ) of 0.08 ng mL^{− 1} was obtained with 1 min trapping (1.5 mL sampling volume), and enhancement factor was 28 compared to conventional hydride generation atomic absorption spectrometry. The LOD was better or at least comparable to literature levels involving on-line trapping and some other sophisticated instrumental method such as graphite furnace atomic absorption spectrometry (GF-AAS) and inductively coupled plasma mass spectrometry (ICP-MS), and it can be further lowered down to 0.03 ng mL^{− 1} by increasing the trapping time to 4 min. The platinum coating was stable for 300 firings without sensitivity loss. Interference and its alleviation were studied in detail. The proposed method was applied to the determination of tellurium in several geological standard reference materials, and the results were found in good agreement with the certified values.     

Thermal lens spectrophotometry of nitrogen dioxide using an excimer-laser-pumped dye laser

A thermal lens spectrophotometer based on a pulsed dye laser pumped by an excimer laser was constructed. A thermal lens spectrum was measured for nitrogen dioxide by scanning the dye laser wavelength, which was well correlated with an absorption spectrum. A linear calibration graph was obtained in the nl 1^?1 range, the detection limit being 4 nl 1^?1, which is similar to the best value achieved by other laser spectrometric methods. The enhancement factor achieved was 16, which is much smaller than the theoretical value of 292 calculated by assuming an exciting laser with a single transverse mode (beam waist radius 0.12 mm). However, the observed enhancement factor agrees fairly well with the theoretical value of 17 calculated from the observed beam radius (0.5 mm) at the waist. Hence the observed small enhancement factor is ascribed to poor beam quality of the dye laser used. Pulsed thermal lens spectrophotometry is shown to be useful especially for the analysis of gaseous samples at elevated temperatures.     

Combined use of Pd and HF as chemical modifiers for the determination of total chromium in produced waters from petroleum exploration by ET AAS

This work reports the evaluation of the combined use of Pd and HF as chemical modifiers for the direct determination of total chromium in waters derived from petroleum exploration employing electrothermal atomic absorption spectrometry (ET AAS). Such waters, usually called as produced waters, have complex composition presenting a number of organic and inorganic substances. When obtained from offshore operations they also present high salinity. In order establish conditions for chromium measurement pyrolysis and atomization curves were built up in different media and employing Pd and HF as chemical modifiers. Also, a detailed study about calibration strategy was performed. At best conditions, pyrolysis and atomization temperatures were 1200 °C and 2600 °C, respectively, and 10 μL of a 500 mg L^− 1 Pd solution was added together with 10 μL of a 50% (v/v) HF solution on 20 μL of sample. Obtained results indicate that, in this kind of sample, chromium can be determined by standard addition method or employing external calibration with standard solutions prepared in 0.8 mol L^− 1 NaCl medium. In order to evaluate the accuracy of the procedure, a recovery test was performed with seven spiked samples of produced waters. The detection limit, quantification limit and the relative standard deviation in 0.8 mol L^− 1 NaCl were also calculated and the values found were 0.45 μg L^− 1, 1.5 μg L^− 1 and 6.0% (at 2.5 μg L^− 1 level), respectively.     

Modification of catalytic adsorptive stripping voltammetric method of hexavalent chromium determination in the presence of DTPA and nitrate

The voltammetric procedure for determination of traces of Cr(VI) [Anal. Chim. Acta (1992) 262:103] was modified by changing the temperature of the measurements. It was found that at the temperature of 40 °C the time of decrease of the Cr(III) signal was shortened from 30 to 5 min. As a result the total analysis time was drastically shortened. The modified procedure does not show any disadvantage as compared to the original method. The results of Cr(VI) determination by the modified procedure are less affected by Cr(III) as compared to the original method. The detection limit of the method was 2.5 × 10^-11 mol L^-1 (1.2 ng L^-1). The validation of the modified procedure was performed by comparison of the results of analyses of tap and river water samples with those obtained using original procedure.     

Multi-element analysis of airborne particulate matter by various spectrometric methods after microwave digestion

A microwave digestion procedure in combination of the measurement of various spectrometric methods including atomic absorption spectrometry, inductively coupled plasma atomic emission spectrometry and inductively coupled plasma mass spectrometry was developed for the multi-element analysis of airborne particulate matter collected on PTFE filters by a dichotomous sampler. In order to achieve more sensitive and rapid multi-element analyses, special PTFE-lined digestion vessels were used. It was found that complete digestion of airborne particulates with an acid mixture of HNO₃-HClO₄-HF (3:7:1, v/v) can be achieved in the microwave-irradiated closed vessel system and direct spectroscopic measurement of the digested sample after appropriate dilution. A recovery study was conducted using a multi-element standard and NIST Standard Reference Material 1648 Urban Particulate. Sixteen major, minor, and trace elements in airborne particulate matter were determined.     

On-line liquid-liquid extraction system using a new phase separator for flame atomic absorption spectrometric determination of ultra-trace cadmium in natural waters

A robust flow injection (FI) on-line liquid-liquid extraction (LLE) preconcentration/separation system associated with a newly designed gravitational phase separator, coupled to flame atomic absorption spectrometry (FAAS) was developed. The performance of the system was illustrated for cadmium determination at the μg l⁻¹ level. The non-charged cadmium complex with ammonium pyrrolidine dithiocarbamate (APDC) was extracted on-line into isobutyl methyl ketone (IBMK). The organic phase was effectively separated from a large volume of aqueous phase and is led into a 100 μl loop of an injection valve before its introduction into the nebulizer. The system was optimized and offered good performance characteristics with unlimited life time of phase separator, greater flow rate ratios and improved flexibility, as compared with other solvent extraction preconcentration systems. With a sampling frequency of 33 h⁻¹, the enhancement factor was 155, the detection limit was 0.02 μg l⁻¹, the relative standard deviation was 3.2% at 2.0 μg l⁻¹ Cd concentration level and the calibration curve was linear over the concentration range 0.06-6.0 μg l⁻¹. The accuracy of the proposed method was evaluated by analyzing a certified reference material of water and by recovery measurements on spiked samples. Finally, it was successfully applied to the analysis of tapwater, river and seawater samples.