Development of a multianalyte method for the determination of anabolic hormones in bovine urine by isotope-dilution GC–MS/MS

A sensitive, specific and selective multianalyte GC–MS/MS method has been developed for the determination of 11 anabolic hormones in bovine urine. After adjusting the urine pH to 4.8, the samples were spiked with deuterated internal standards and submitted to enzymatic hydrolysis with β-glucuronidase/arylsulfatase. Hormones were eluted with methanol through a C18 solid phase cartridge and submitted to a liquid–liquid extraction. Analytes were derivatized by adding N,O-bis(trimethylsilyl)trifluoroacetamide (BSTFA) with 1% trimethylchlorosilane and GC–MS data were obtained in the positive electron impact tandem mass mode. Under these conditions, no matrix effects were observed and limit of detection values were in the range of 0.005 ng/mL (diethylstilbestrol) to 0.38 ng/mL (17α-methyltestosterone and 17α-ethynylestradiol). Recoveries from 81% (α-zeranol) to 149% (17α-methyltestosterone) were found under the selected conditions. These results were better than those found using heptafluorobutyric anhydride (HFBA) as derivative reagent and those measured in full scan and selective ion monitoring modes.     

Development of an analytical procedure for the determination of polybrominated diphenyl ethers in environmental water samples by GC–ICP-MS

Polybrominated diphenyl ethers (PBDEs) are flame retardants, which due to their widespread use are frequently present as pollutants in the environment. In the EU Water Framework Directive (WFD) six PBDE congeners (BDE 28, BDE47, BDE 99, BDE 100, BDE 153 and BDE 154) are listed as priority substances. The uncertainty of the analytical method used for their determination in water samples at environmental quality standard (EQS) level (0.5 ng L⁻¹ for the ΣPBDEs) should be equal or less than 50% and the limit of quantification (LOQ) for ΣPBDEs below 0.15 ng L⁻¹. To meet these requirements, an analytical procedure for the determination of these six PBDEs in environmental water samples by gas chromatography–inductively coupled plasma mass spectrometry (GC–ICP-MS) was developed. The acidification of water samples to pH 2 maintained the stability of PBDEs for at least 20 days. The use of Tris–citrate buffer enabled efficient desorption of PBDEs from suspended particulate matter (SPM) and humic acids (HA), and their further quantitative solvent extraction into 2 mL of iso-octane. When 300 mL of water sample was used for analysis and the organic phase concentrated to 25 μL, the expanded uncertainty for determination of PBDEs at EQS level was found to be around 40% (a coverage factor for a confidence level of 95%, k = 2), and the LOQ for the ΣPBDEs 0.109 ng L⁻¹. Finally, to demonstrate the applicability of the newly developed GC–ICP-MS procedure, PBDEs were determined in river and sea water samples.     

Application of polyaniline–multiwalled carbon nanotubes composite fiber for determination of benzaldehyde in injectable pharmaceutical formulations by solid-phase microextraction GC–FID using experimental design

A polyaniline–multiwalled carbon nanotubes composite fiber was electrodeposited onto a platinum wire using cyclic voltammetry. This fiber was used for headspace solid-phase microextraction combined with gas chromatography and flame ionization detector of trace levels of benzaldehyde in some injectable pharmaceutical formulations. Three solid-phase microextraction parameters including temperature, time and stirring rate were investigated simultaneously using a three-level-three-factor Box–Behnken as experimental design on the extraction capability. The as-made fiber has a lifetime of over 300 extractions without any obvious decline in extraction efficiency. At the optimum conditions (extraction temperature 60°C, extraction time 15 min, stirring rate 700 rpm), the method displays excellent linearity over the concentration range of 25–1000 ng/mL of benzaldehyde with RSD values ranging from 1.0 to 6.8%. The limits of quantitation and detection were 25 and 10 ng/mL, respectively.     

A Screening Method for Polycyclic Aromatic Hydrocarbons Determination in Sediments by Headspace SPME with GC–FID

A screening method for polycyclic aromatic hydrocarbons (PAHs) determination in sediment using headspace solid phase microextraction (HS-SPME) with gas chromatography–flame ionization detection was developed. In order to obtain the convenient experimental conditions for HS-SPME extraction an experimental design with two steps was done. 0.2 g of sediment and 85 µm polyacrylate fibre, 80 °C and 120 min were the chosen extractions conditions. The limit of detection (LOD) was from 0.8 ng g⁻¹ (fluoranthene) to 8 ng g⁻¹ (chrysene). The relative standard deviation (RSD) was less than 7.0%. Determination of PAHs in NRC–CNRC–HS–3B reference marine sediment showed good agreement with the certified values. The method was applied in the analysis of ten river and estuary surface sediments from Gipuzkoa (North Spain). PAHs total concentration ranged from 400 to 5,500 ng g⁻¹.

     

Application of Nylon6/Polypyrrole core–shell nanofibres mat as solid-phase extraction adsorbent for the determination of atrazine in environmental water samples

A novel solid-phase extraction (SPE) system, based on a new sorbent of Nylon6/Polypyrrole (PA6/PPy) core–shell nanofibres mat and a new packing format of SPE disks, is presented in this paper. A series of related parameters that may affect the efficiency, such as the kind of eluent and its volume, the amount of nanofibres mat, ionic strength, pH of the sample, flow rate of the sample and volume of the sample, have been investigated systematically. Under the optimised conditions, the target analyte in 10 mL water samples can be completely extracted by a 3.0 mg PA6/PPy nanofibres mat and easily eluted by 400 µL acetonitrile. Around 20 µL elution was injected directly to HPLC-UV for determination, without further concentration. Besides, the nanofibres mat could be repeatedly used up to six cycles. Satisfactory linearity was achieved in the range of 0.1–40.0 ng/mL with a correlation coefficient of 0.9999. The limit of detection (LOD) (3 S/N) was 0.03 ng/mL, which could meet the determination requirements of atrazine as per the European Union legislation, US. Safe Drinking Water Act and the State Environmental Protection Administration of China. The simple, effective and economic method was proposed for the determination of atrazine in environmental water at trace level. The recoveries ranged from 94.73 to 114.92%, with relative standard deviations (RSDs) of 2.5–4.2%, and were obtained from tap water and lake water samples with atrazine at 2.0 ng/mL, suggesting the actual feasibility of the proposed method in environmental water samples.     

Using bamboo charcoal as solid-phase extraction adsorbent for the ultratrace-level determination of perfluorooctanoic acid in water samples by high-performance liquid chromatography–mass spectrometry

In recent years, bamboo charcoal, a new kind of material with special microporous and biological characteristics, has attracted great attention in many application fields. In this paper, the potential of bamboo charcoal to act as a solid-phase extraction (SPE) adsorbent for the enrichment of the environmental pollutant perfluorooctanoic acid, which is one of the newest types of persistent organic pollutants in the environment, has been investigated. Important factors that may influence the enrichment efficiency—such as the eluent and its volume, the flow rate of the sample, the pH of the sample and the sample volume—were investigated and optimized in detail. Under the optimum conditions, the limit of detection for PFOA was 0.2 ng L⁻¹. The experimental results indicated that this approach gives good linearity (R ² = 0.9995) over the range 1–1000 ng L⁻¹ and good reproducibility, with a relative standard deviation of 4.0% (n = 5). The proposed method has been applied to the analysis of real water samples, and satisfactory results were obtained. The average spiked recoveries were in the range 79.5∼118.3 %. All of the results indicate that the proposed method could be used for the determination of PFOA at ultratrace levels in water samples.     

Accurate and simple determination of oxcarbazepine in human plasma and urine samples using switchable-hydrophilicity solvent in GC–MS

This work presents a sensitive and rapid analytical method for the determination of oxcarbazepine in human plasma and urine samples. A vortex-assisted switchable hydrophilicity solvent-based liquid phase microextraction (VA–SHS–LPME) was used to preconcentrate oxcarbazepine from the samples before the determination by gas chromatography mass spectrometry. The switchable hydrophilicity solvent was synthesized by protonating N,N-dimethylbenzylamine with carbon dioxide to make it totally miscible with an equivalent volume of water. Parameters of the VA–SHS–LPME method including volume of switchable hydrophilicity solvent, concentration/volume of sodium hydroxide and vortex period were systematically optimized. Under the optimum conditions, good linearity ranging from 27.03 to 353.47 μg/kg was obtained for the analyte. Limit of detection and quantitation values were found to be 6.2 and 21 μg/kg (mass base), respectively. The relative standard deviation was calculated as 6.9% for six replicate measurements of the lowest concentration of the calibration plot. Satisfactory recovery results were calculated in the range of 97–100% for human plasma and urine samples spiked at five different concentrations.     

Development of an analytical method for the determination of the residues of four pyrethroids in meat by GC–ECD and confirmation by GC–MS

The development of an analytical method for the determination of four selected pyrethroid insecticides at residue level in beef meat is presented. Acetone and petroleum ether at 40-60 degrees C were chosen as extraction solvents. A two-step clean-up was performed using an Extrelut NT3-C(18) system followed by a Florisil column, with disposable, ready-to-use cartridges. Instrumental analysis was carried out on a gas chromatograph equipped with an electron capture detector (GC-ECD), using matrix-matched and internal standard calibration techniques. Confirmatory analysis by GC-MS was performed. Recoveries at the EU Maximum Residue Limit (MRL), 0.5 x MRL and 1.5 x MRL levels and the repeatabilities were widely satisfactory. The main advantage of the method was the reduction of analysis time as compared with previously published works. The applicability of the method to different matrices and pesticide classes will be investigated.     

GC–FID as a primary method for establishing the purity of organic CRMs used for drugs in sport analysis

The National Analytical Reference Laboratory has synthesized and characterized 67 anabolic steroid marker metabolites, both unlabelled and deuterated, and 37 key glucuronide and sulfate steroid conjugate pure substance reference materials. Work is also in process to establish their full traceability so that they can be issued as certified and primary reference materials. Both identity and purity have been rigorously characterized using a number of techniques and a primary method for purity assessment developed, based gas chromatography combined with flame ionization detection for the parent steroids and HPLC with evaporative light scattering detection for non-volatile steroid conjugates. Strategies for establishing traceability and for estimating measurement uncertainty are reported. The strategies described are considered applicable to a wide range of organic pure substance reference materials.     

Micro-pyrolysis of technical lignins in a new modular rig and product analysis by GC–MS/FID and GC × GC–TOFMS/FID

A new offline-pyrolysis rig has been designed to allow multifunctional experiments for preparative and analytical purposes. The system conditions can be set and monitored, e.g. temperature, its gradients and heat flux. Some special features include (1) high heating rates up to 120 °C/s with pyrolysis temperatures up to 850 °C at variable pyrolysis times and (2) the selection of different atmospheres during pyrolysis. A complete mass balance of products and reactants (gas, liquids and solids) by gravimetric methods and sequential chromatographic analyses was obtained.The pyrolytic behaviour and the decomposition products of lignin-related compounds were studied under different conditions: heating rates (from 2.6 °C/s up to 120 °C/s), pyrolysis temperatures at 500 °C and 800 °C in different atmospheres (N₂, H₂, and mixtures of N₂ and acetylene). Kraft lignin, soda lignin, organosolv lignin, pyrolytic lignin from pine bio-oil, residues from biomass hydrolysis and fermentation were studied.The obtained pyrolysis products were classified into three general groups: coke, liquid phase and gas phase (volatile organic compounds (VOC) and permanent gases). The liquid fraction was analysed by GC–MS/FID. In addition, comprehensive two-dimensional GC was applied to further characterise the liquid fraction. VOCs were semi-quantified by a modified headspace technique using GC–MS/FID analysis. The micro-pyrolysis rig proved to be an efficient and useful device for complex pyrolysis applications.     

Development,optimization and application of an analytical methodology by ultra performance liquid chromatography–tandem mass spectrometry for determination of amanitins in urine and liver samples

Amanitins, highly toxic cyclopeptides isolated from various Amanita species, are the most potent poisons accounting for the hazardous effects on intestinal epithelium cells and hepatocytes, and probably the sole cause of fatal human poisoning.     

Application of dispersive liquid–liquid microextraction for the determination of donepezil in urine by HPLC using a core–shell column

A rapid and novel method combining dispersive liquid–liquid microextraction and high-performance liquid chromatography coupled with fluorescence detection was developed for the determination of donepezil in human urine. Parameters affecting extraction efficiency and chromatographic determination, such as the type and volume of the extraction and disperser solvent, pH of sample for dispersive liquid–liquid microextraction, mobile-phase composition, pH, column oven temperature, and flow rate for chromatographic determination, were evaluated and optimized. Using a C₁₈ core–shell column (7.5 × 4.6?mm, 2.7?μm), the determination of donepezil was accomplished within 5?min. Under optimum conditions, developed method was linear in the range of 0.5–25?ng?mL^?1 with the correlation coefficient >0.99. Limit of detection was 0.15?ng?mL^?1. The relative standard deviation at three concentration levels (2, 12.5, and 20?ng?mL^?1) was less than 11% with accuracy in the range of 96.9–102.8%. The results of this study demonstrate that the use of dispersive liquid–liquid microextraction and core–shell column can be considered as a powerful tool for the analysis of donepezil in human urine.     

Validation of a novel derivatization method for GC–ECD determination of acrylamide in food

This paper proposes a new method for quantitative analysis of acrylamide in cereal-based foods and potato chips. The method uses reaction with trifluoroacetic anhydride, and analyses the resulting derivative by use of gas chromatography with electron-capture detection (GC–ECD). The effects of derivatization conditions, including temperature, reaction time, and catalyst, on the acylation reaction were evaluated. Chromatographic analysis was performed on an SE-54 capillary column. Under the optimum conditions, good retention and peak response were achieved for the acrylamide derivative. The analytical method was fully validated by assessment of LODs and LOQs (1 ng g^?1 and 25 ng g^?1, with relative standard deviations (RSD) 2.1 and 3.6, respectively), linearity (R?=?0.9935 over the range 0.03–10 μg g^?1), and extraction recovery (>96 %, with RSD below 2.0, for acrylamide spiked at 1, 20, 50, and 100 ng g^?1; 99.8 % for acrylamide content >1000 ng g^?1). The method requires no clean-up of the acrylamide derivative before injection. The method has been successfully used to determine acrylamide levels in different commercial cereal-based foods, French fries, and potato chips.

Palladiumimmobilized on chitosan nanofibers cross-linked by glutaraldehyde as an efficient catalyst for the Mizoroki–Heck reaction

Nonwoven chitosan (CS) nanofiber mats were successfully prepared by the electrospinning of the mixture of CS and poly(ethylene oxide) (PEO) in acetic acid aqueous solution. The CS/PEO fiber mats were treated with glutaraldehyde aqueous solution to stabilize fibers in solution. The concentration of glutaraldehyde is important for incorporating swelling properties in the cross-linked CS/PEO fiber mats. The cross-linked CS/PEO fibers (CCS/PEO fibers) were then used as supports for palladium catalysts in the Mizoroki–Heck reaction. The results of the study demonstrated that the catalytic activities of Pd catalyst supported on CCS/PEO fiber (Pd-CCS/PEO fiber) were highly dependent on the concentration of glutaraldehyde in the cross-linking process. Density functional theory (DFT) calculations indicated that the Schiff bond formed between CS and glutaraldehyde could reduce the energy needed to form a chelate complex between the CCS/PEO fibers and palladium active species. This in turn could decrease the activation energy of the Mizoroki–Heck reactions which occur in the presence of the Pd-CCS/PEO fiber catalysts. The optimized Pd-CCS/PEO fiber catalyst was very efficient and stable in the Mizoroki–Heck reaction of aromatic iodides with olefins.     

Contribution of microextraction in packed sorbent for the analysis of cotinine in human urine by GC–MS

A simple, rapid, sensitive, and non-consuming solvent method for the determination of cotinine in urine was developed, based on sample preparation by the relatively new technique microextraction in packed sorbent (MEPS) and analysis by GC–MS. This optimized method was compared with conventional solid-phase extraction/liquid–liquid extraction method used as reference. The wide linear range (5–5,000 ng/mL) and high sensitivity of the MEPS method (limit of detection 0.8 ng/mL) allow application to analysis of urine from smokers as well as non-smokers susceptible to passive smoking.     

Quantitation by GC–MS of Methylglyoxal as a Marker in Anxiety-Related Studies

Methylglyoxal (MG) is present in the human system. In the cell, MG is degraded by glyoxalase 1 (Glo 1), an enzyme differentially expressed in several mouse models of anxiety-related behavior. It has also been associated with the formation of advanced glycation and lipoxidation end products, contributing to diabetes-related complications. Approaches developed for accurate quantitation of MG in this study include the synthesis of a deuterated MG analog to serve as an internal standard; skillful application of the standard addition protocol (with “reiteration”) to quantitate MG in “blank” samples, allowing the preparation of calibration standards using the same test specimen matrix system; and various pretreatment methods, including extraction and derivatization, to prepare complex brain tissue specimens for gas chromatography–mass spectrometry analysis. Using our method, brain MG levels in high- and low-anxiety-related behavior (HAB and LAB) mice were determined as 5.11 ± 0.89 and 13.05 ± 0.89 μg g^?1, respectively. These data supported the conclusion that MG level in brain is negatively correlated with anxiety in mouse models of anxiety-related studies, contributing to better understanding of the molecular mechanisms underlying reported observations.     

Analytical development for analysis of pharmaceuticals in water samples by SPE and GC–MS

An analytical procedure involving solid-phase extraction (SPE) and gas chromatography–mass spectrometry (GC–MS) has been developed for determination of pharmaceutical compounds (aspirin, caffeine, carbamazepine, diclofenac, ketoprofen, naproxen, ibuprofen, clofibrate, clofibric acid, and gemfibrozil) in a variety of aqueous samples (wastewater and surface water). After filtration, samples were extracted and concentrated using C₁₈ or HLB cartridges, depending on the type of compound. Sample storage conditions were checked and optimized to ensure preservation of the pharmaceutical substance, taking into consideration environmental sampling conditions. For most of the pharmaceuticals monitored, recovery was in the range 53 to 99% and the variability was below 15% for the complete procedure, with limits of detection ranging from 0.4 to 2.5 ng L⁻¹, depending on the compound. The methods were successfully applied to monitoring of pharmaceutical contamination of the Seine estuary. Concentrations varied from several dozens of nanograms per liter for surface waters to several hundreds of nanograms per liter for wastewaters.