In-vitro oxidation of bisphenol A: Is bisphenol A catechol a suitable biomarker for human exposure to bisphenol A?

The extensive use of bisphenol A (BPA) in the manufacture of consumer products results in widespread human exposure to the chemical. In the body, BPA undergoes first-pass metabolism to form BPA glucuronide, considered to be a major BPA byproduct. Concentrations of total (free plus conjugated) urinary species of BPA are used to assess human exposure to BPA. However, because BPA can be present in numerous consumer and household products, potential contamination with parent BPA during collection and handling may pose a challenge when measuring BPA in such biological samples as blood or urine. In this study we investigated the in-vitro phase I metabolism of BPA in rat and human liver microsomes by using on-line solid-phase extraction–high-performance liquid chromatography–tandem mass spectrometry to identify phase I metabolites (e.g., BPA oxidation products) that could be used as potential alternative biomarkers of BPA exposure. We unambiguously identified 5-hydroxy BPA (BPA catechol) as an in-vitro oxidative metabolite of BPA, but human microsomes oxidized only about 10% of BPA to BPA catechol. We evaluated the usefulness of BPA catechol as a potential biomarker of human exposure to BPA by measuring total concentrations of BPA catechol and BPA in 20 urine samples. We detected BPA catechol at much lower concentrations and frequency than those of BPA. Furthermore, we found that free BPA catechol was rather unstable in urine, which highlights the importance of sampling techniques to adequate interpretation of biomonitoring data. Together, these findings suggest that BPA catechol may not be a suitable biomarker of environmental exposure to BPA, but could be used to confirm BPA exposure in special populations or in situations when urine specimens were potentially contaminated with BPA.     

Determination of the endocrine disrupter bisphenol—A in the blood of uremia patients treated by dialysis

Summary Automated solid-phase extraction (SPE) then high-performance liquid chromatography have been studied for determination of the endocrine disrupter bisphenol-A (BPA) in blood. Electrochemical detection was used for selective and sensitive detection of BPA. Determination of BPA in the blood of uremia patients treated by dialysis has not yet been reported. Acidified blood and acidified SPE eluent were used to suppress the ionization of BPA and thus retain the compound on a C₁₈ column. Because artificial dialysis can be performed for periods longer than 20 years, for reasons of safety the amount of BPA migrating from the artificial dialyzer into the blood of a uremia patient was compared for different sterilization methods and for different artificial dialyzers manufactured from different materials.     

Is the bisphenol A biradical formed in the pyrolysis of polycarbonate?

An unknown species has been detected in the analysis of the products in a pyrolysis of polycarbonate using Li(+) ion-attachment mass spectrometry (IAMS). The mass spectra exhibited a Li(+) adduct peak at m/z 233 that was tentatively assigned to bisphenol A (BPA) biradical. Experimentally, this assignment was supported by the observation that the production rate increased under an inert nitrogen atmosphere. To further confirm the assignment, the stability of the BPA biradical to intramolecular rearrangement reactions as well as unimolecular decomposition has been analyzed via density functional theory calculations [B3LYP/6-311+G(3df,2p)]. The results show that the bisphenol A biradical is an open-shell biradical singlet that is stable to unimolecular decomposition. Although some of the proposed intramolecular rearrangement products have lower energies than those of the BPA diradical, these pathways have large reaction barriers and the kinetic lifetime of the radical is expected to be of the order of hours under the conditions of the experiment. The calculations also reveal that the bisphenol A diradical has large Li(+) affinities supporting the fact that these Li(+) complexes could be detected in the Li(+) ion attachment mass spectrometry. On the basis of these results the Li(+) adduct peak at m/z 233 detected in the pyrolysis of polycarbonate is assigned to the bisphenol A biradical.     

Determination of bisphenol A and bisphenol B in canned seafood combining QuEChERS extraction with dispersive liquid–liquid microextraction followed by gas chromatography–mass spectrometry

A new simple and reliable method combining an acetonitrile partitioning extractive procedure followed by dispersive solid-phase cleanup (QuEChERS) with dispersive liquid–liquid microextraction (DLLME) and further gas chromatography mass spectrometry analysis was developed for the simultaneous determination of bisphenol A (BPA) and bisphenol B (BPB) in canned seafood samples. Besides the great enrichment factor provided, the final DLLME extractive step was designed in order to allow the simultaneous acetylation of the compounds required for their gas chromatographic analysis. Tetrachloroethylene was used as extractive solvent, while the acetonitrile extract obtained from QuEChERS was used as dispersive solvent, and anhydride acetic as derivatizing reagent. The main factors influencing QuEChERS and DLLME efficiency including nature of QuEChERS dispersive-SPE sorbents, amount of DLLME extractive and dispersive solvents and nature and amount of derivatizing reagent were evaluated. DLLME procedure provides an effective enrichment of the extract, allowing the required sensitivity even using a single quadropole MS as detector. The optimized method showed to be accurate (>68?% recovery), reproducible (<21?% relative standard deviation) and sensitive for the target analytes (method detection limits of 0.2?μg/kg for BPA and 0.4?μg/kg for BPB). The screening of several canned seafood samples commercialized in Portugal (total?=?47) revealed the presence of BPA in more than 83?% of the samples with levels ranging from 1.0 to 99.9?μg/kg, while BPB was found in only one sample at a level of 21.8?μg/kg.     

A Study on the Simultaneous Determination of Copper and Tin in the Presence of Lead

ＡＳｔｕｄｙｏｎｔｈｅＳｉｍｕｌｔａｎｅｏｕｓＤｅｔｅｒｍｉｎａｔｉｏｎｏｆＣｏｐｐｅｒａｎｄＴｉｎｉｎｔｈｅＰｒｅｓｅｎｃｅｏｆＬｅａｄＡＳｔｕｄｙｏｎｔｈｅＳｉｍｕｌｔａｎｅｏｕｓＤｅｔｅｒｍｉｎａｔｉｏｎｏｆＣｏｐｐｅｒａｎｄＴｉｎｉｎｔｈｅＰ...     

Surface-imprinted core–shell Au nanoparticles for selective detection of bisphenol A based on surface-enhanced Raman scattering

Surface-imprinted core–shell Au nanoparticles (AuNPs) were explored for the highly selective detection of bisphenol A (BPA) by surface-enhanced Raman scattering (SERS). A triethoxysilane-template complex (BPA-Si) was synthesized and then utilized to fabricate a molecularly imprinted polymer (MIP) layer on the AuNPs via a sol–gel process. The imprinted BPA molecules were removed by a simple thermal treatment to generated the imprint-removed material, MIP-ir-AuNPs, with the desired recognition sites that could selectively rebind the BPA molecules. The morphological and polymeric characteristics of MIP-ir-AuNPs were investigated by transmission electron microscopy and Fourier-transform infrared spectroscopy. The results demonstrated that the MIP-ir-AuNPs were fabricated with a 2 nm MIP shell layer within which abundant amine groups were generated. The rebinding kinetics study showed that the MIP-ir-AuNPs could reach the equilibrium adsorption for BPA within 10 min owning to the advantage of ultrathin core–shell nanostructure. Moreover, a linear relationship between SERS intensity and the concentration of BPA on the MIP-ir-AuNPs was observed in the range of 0.5–22.8 mg L⁻¹, with a detection limit of 0.12 mg L⁻¹ (blank ± 3 × s.d.). When applied to SERS detection, the developed surface-imprinted core–shell MIP-ir-AuNPs could recognize BPA and prevent interference from the structural analogues such as hexafluorobisphenol A (BPAF) and diethylstilbestrol (DES). These results revealed that the proposed method displayed significant potential utility in rapid and selective detection of BPA in real samples.     

Electrochemical detection of bisphenol A based on Co nanoparticles/N-doped carbon nanotubes compositesEI北大核心CSCD

Co nanoparticles and nitrogen-doped carbon nanotubes （NCNTs）were prepared by calcination of metal-organic material ZIF-67 in a reductive atmosphere of H2 and Ar gas,and modified on the surface of glassy carbon electrod（GCE）for the detection of bisphenol A（BPA）. The Co/NCNTs composites exhibited superior electrocatalytic performance for BPA oxidation owing to the synergistic effect between chemical composition and the specific structure of the Co/NCNTs composites. In optimal conditions,Co/NCNTs/GCE exhibited a linear range of 0.01-20 μµmol/L for BPA（R2=0.998）. The prepared electrode was employed to detect the content of BPA in real samples with the recoveries of 98.4%-104.6%. © 2023, Youke Publishing Co.,Ltd. All rights reserved.     

Does Fibronect in Influence the Determination of Circulating Immune Complexes by Means of a Clq-Enzyme Immunoassay?

Abstract

Fibronect in was shown to bind to solid-phase C1q and to inhibit the binding of aggregated lgG in an C1q-solid-phase enzyme immunoassay in the absence of human serum. In the presence of human serum the determination of aggregated lgG and circulating immune complexes is not influenced by fibronectin in this assay. Therefore, we suggest that fibronectin does not affect the determination of immune complexes in serum specimens by C1q binding assays.     

Solid Phase Extraction Chemiluminescence Determination of Methamidaphos on Vegetables

IntroductionDuring recent years,organophosphorus pesticides(OPPs)have been widely used in agriculture becauseof their low environmental persistence and high effec-tiveness.However,they have a high acute toxicity.Trace amounts of OPPs may remain in foodstu…     

Measurement of bisphenol A, bisphenol A ß-D-glucuronide, genistein, and genistein 4'-ß-D-glucuronide via SPE and HPLC-MS/MS

Bisphenol A (BPA) is a synthetic industrial reactant used in the production of polycarbonate plastics, and genistein is a natural phytoestrogen abundant in the soybean. Current studies investigating the endocrine-disrupting effects of concomitant exposures to BPA and genistein have warranted the development of an analytical method for the simultaneous measurement of BPA and genistein, as well as their primary metabolites, bisphenol A ?-d-glucuronide (BPA gluc) and genistein 4′-?-d-glucuronide (genistein gluc), respectively. All four analytes were extracted from rat plasma via solid phase extraction (SPE). Three SPE cartridges and four elution schemes were tested. Plasma extraction using Bond Elut Plexa cartridges with sequential addition of ethyl acetate, methanol, and acetonitrile yielded optimal average recoveries of 98.1 ± 1.8% BPA, 94.9 ± 8.0% genistein, 91.4 ± 6.1% BPA gluc, and 103 ± 6.1% genistein gluc. Identification and quantification of the four analytes were performed by a validated HPLC-MS/MS method using electrospray ionization and selective reaction monitoring. This novel analytical method should be applicable to the measurement of BPA, genistein, BPA gluc, and genistein gluc in urine, cultures, and tissue following in vivo exposures. While reports of the determination of BPA and genistein independently exist, the simultaneous optimized extraction and detection of BPA, genistein, BPA gluc, and genistein gluc have not previously been reported.     

CuS–MWCNT based electrochemical sensor for sensitive detection of bisphenol A

The rapid and simple detection of bisphenol A is very important for the safety and reproduction of organisms. Here, a sensitive and reliable electrochemical sensor was established for bisphenol A detection based on the high amplification effect of copper sulfide-multi-walled carbon nanotube (CuS–MWCNT) nanocomposites. The flower-like CuS–MWCNT were successfully synthesized by a simple hydrothermal method accompanied by polyvinylpyrrolidone (PVP). Compared with bare glassy carbon electrode (GCE), CuS–MWCNT modified GCE could amplify the electrochemical signals in about ten times, which was attributed to the synergistic effect of CuS and MWCNT. The MWCNT could increase the specific surface area of electrodes and improve the electrode activity. The integration of CuS could further enhance the electrode conductivity as well as accelerate the electron transfer rate. Raman spectra and transmission electron microscope (TEM) were used to characterize the successful fabrication of CuS–MWCNT nanocomposites and its uniform and monodispersed morphology. Under optimizing conditions, the oxidation currents of bisphenol A via the differential pulse voltammetric (DPV) showed a good linear relationship with its concentration in a wide range of 0.5–100 μM, with a detection limit of 50 nM. This electrochemical sensor of bisphenol A provided a convenient and economical platform with high sensitivity and reproducibility, which had great potential in environmental monitoring.     

Where are genes in paulingite? Mathematical principles of formation of inorganic materials on the atomic level

By means of the concept of universal optimum and general principles of inorganic gene, structures of paulingite-related zeolites and minerals have been constructed. The structures of zeolite Rho and paulingite are considered as members of zeolite family generated by the work of 4-colored cellular automaton (CA). The ideal symmetry of the members of the family is cubic, space group $Im \bar 3mBy means of the concept of universal optimum and general principles of inorganic gene, structures of paulingite-related zeolites and minerals have been constructed. The structures of zeolite Rho and paulingite are considered as members of zeolite family generated by the work of 4-colored cellular automaton (CA). The ideal symmetry of the members of the family is cubic, space group , a = 15 + 10n [?], where n is a number of the CA cycle (n = 0 for zeolite Rho and 2 for paulingite). A new hypothetical zeolite of the family with n = 1 is predicted and named ISC-1 (Institute of Silicate Chemistry-1); atomic coordinates and theoretical X-ray powder diffraction pattern have been calculated. It appears to be very probable that universal optimum contains all necessary information for its material realization (sharp configurations) and construction of materials with certain type of interaction potential (even with restrictions existing in theory for this potential).

V. Ya. ShevchenkoEmail:

     

Determination of steryl sulphates in invertebrate tissue by liquid chromatography–tandem mass spectrometry

A method for the identification and quantification of underivatised steryl sulphates in invertebrates by liquid chromatography (LC) coupled with tandem mass spectrometry (MS) involving a single cleanup step has been developed. Negative electrospray ionisation and positive and negative atmospheric-pressure chemical ionisation (APCI) spectra of steryl sulphate showed pseudomolecular ions ([M+H–H₂SO₄]⁺or [M–H]⁻). Collision-induced dissociation (CID) was efficient only in positive APCI. LC-MS in negative APCI was least susceptible to interference and possible differences in response factors. The detection limits (signal-to-noise ratio of 3) based on cholest-5-enyl-3-sulphate in positive and negative APCI modes are 3.66 and 0.73 pmol μL⁻¹, respectively. Calibration plots and response factors for cholest-5-enyl-3-sulphate relative to the internal standard, cholecalciferyl-3-sulphate, in both positive and negative polarities, were linear in the concentration range from 1.22 to 16.4 pmol μL⁻¹ with good coefficients of determination (R ²>0.98). It is suggested that the structure elucidation of steryl sulphates is best achieved in CID positive APCI mode, whereas their quantification should be carried out using negative APCI.     

Determination of anabolic steroids in muscle tissue by liquid chromatography–tandem mass spectrometry

A specific and sensitive multi-method based on liquid chromatography–tandem mass spectrometry using atmospheric pressure chemical ionization (LC–APCI–MS/MS) has been developed for the determination of 20 anabolic steroids in muscle tissue (diethylstilbestrol, β-estradiol, ethynylestradiol, α/β-boldenone, α/β-nortestosterone, methyltestosterone, β-trenbolone, triamcinolone acetonide, dexamethasone, flumethasone, α/β-zearalenol, α/β-zearalanol, zearalenone, melengestrol acetate, megestrol acetate and medroxyprogesterone acetate). The procedure involved hydrolysis, extraction with tert-butyl methyl ether, defattening and final clean-up with solid phase extraction (SPE) on Oasis HLB and Amino cartridges. The analytes were analyzed by reversed-phase LC–MS/MS, in positive and negative multiple reaction monitoring (MRM) mode, acquiring two diagnostic product ions from each of the chosen precursor ions for the unambiguous confirmation of the hormones. The method was validated at the validation level of 0.5 ng/g. The accuracy and precision of the method were satisfactory. The decision limits CCα ranged from 0.03 to 0.14 ng/g while the detection capabilities CCβ ranged from 0.05 to 0.24 ng/g. The developed method is sensitive and useful for detection, quantification and confirmation of these anabolic steroids in muscle tissue and can be used for residue control programs.     

A Novel Sensitive Method for the Determination of Cadmium and Lead Based on Magneto‐Voltammetry

Abstract

A novel method for the ultratrace determination of Cd²⁺ and Pb²⁺ based on magneto‐voltammetry was developed. In the presence of a low strength magnetic field of 0.6 T, square wave stripping voltammetry (SWSV) of Cd²⁺ and Pb²⁺ was performed in this determination. A high concentration of redox species Fe³⁺ was added to the analytes to generate a large cathodic current during the preconcentration step. A large Lorentz force arising from the flux of net current through the magnetic field resulted in convective solution flow due to magnetohydrodynamics. Then more metal ions deposited on the electrode surface at a faster rate and an enhancement as large as 160% for the stripping peak current was observed. Under the optimal conditions, this method exhibits high sensitivities of 5.67 µA µM^?1 for Cd²⁺ and 6.98 µA µM^?1 for Pb²⁺, over the 1×10^?8 – 1×10^?6 mol l^?1 range. Detection limits as low as 9.0×10^?10 and 8.6×10^?10 mol l^?1 for Cd²⁺ and Pb²⁺ were obtained with a 2 min preconcentration time, respectively. The method was successfully applied to detect Cd²⁺ and Pb²⁺ in real water samples and the results were in agreement with atomic absorption spectrometry.     

Depolymerization of Poly（bisphenol A carbonate） in Subcritical and Supercritical Toluene

The depolymerization of poly(bisphenol A carbonate)(PC) in subcritical and supercritical toluene was studied. The experimental parameters, which influence the depolymerization reaction such as temperature (570-633 K), pressure (4.0-7.0 MPa), reaction time (5-60 min), and toluene to PC weight ratio (3.0-11.0), were investigated, and the reaction products were determined by GC, GC/MS and FT-IR spectrometer. It was found that the main product of the depolymerization reaction was bisphenol A(BPA). BPA accounted for over 55.7% of the depolymerization products at reaction temperature 613 K, pressure 5.0-6.0 MPa, reaction time 15 min and toluene/PC weight ratio of around 7.0.     

Does amino acid sequence determine the properties of Aβ dimer?

The effect of random reshuffling of amino acids on the properties of dimers formed by Aβ peptides is studied using replica exchange molecular dynamics and united atom implicit solvent model. We show that thermodynamics of dimer assembly and the dimer globule-like state are not affected by sequence permutation. Furthermore, sequence reshuffling does not change the distributions of non-local interactions and, to a large extent, amino acids in the dimer volume. To rationalize these results, we demonstrate that Gaussian statistics applies surprisingly well to the end-to-end distances of the peptides in the dimer implying that non-bonded interactions between distant along the chain amino acids are effectively screened. This observation suggests that peptides in the dimer behave as ideal chains in polymer melt, in which amino acids lose their "identity" and therefore the memory of sequence position. As a result large-scale properties of the dimer become universal or sequence independent. Comparison of our simulations with the prior theoretical studies and their implications for experiments are discussed.