Polarographic study of the complexes of cadmium(II) and lead(II) with methoxyacetate ions

Reduction of the complexes of cadmium(II) and lead(II) atdme in aqueous and aqueous-methanol media at μ = 1.0 M(NaClO₄) at 15 ±0.1 and 25 ±0.1°C is reversible and diffusion-controlled. Four complex species are formed in either case. The overall stability constants of 1:1,1:2, 1:3 and 1:4 complexes have been determined. Lead(II) complexes are much stronger than the corresponding cadmium(II) complexes.     

Thermodynamics of interactions between organic ammonium ions and sulfonatocalixarenes

Calorimetric titration and NMR experiments in aqueous phosphate buffer (pH 7.2) at 298.15 K have been done to determine the binding mode, complex stability constants and thermodynamics (ΔG°, ΔH°, and TΔS°) for 1:1 inclusion complexation of water-soluble calix[n]arenesulfonates (CnAS, n = 4 and 6) and thiacalix[4]arene tetrasulfonate (TCAS) with acethylcholine, carnitine, betaine and benzyltrimethylammonium ion. The results show the inclusion complexations are driven by enthalpy (ΔH° < 0), accompanied by negative entropic changes (ΔS° < 0). The binding affinities (C4AS > C6AS > TCAS) are discussed from the viewpoint of CH-π/π-π interactions, electrostatic interactions and size/shape-fit relationship between host and guest.     

Potentiometric determination of stability constants of inorganic cyclophosphate complexes with copper(II), cadmium(II) and lead(II) ions

The stability constants of the complexes of cyclophosphate anions and copper(II), cadmium(II) and lead(II) ions were determined by potentiometry with the use of ion-selective electrodes. For each metal ion, the stability constant of the 1:1 complex increases linearly with the charge on the phosphate ion. For the same cyclophosphate ion, the stability constants also increase with increase in the crystal radii of the cation, i.e. in the order: Cu²⁺ < Cd²⁺ < Pb²⁺. These results suggest that the complex formed is a typical outer-sphere type based on electrostatic forces.     

Sorption and filtration of Hg(II) ions from aqueous solutions with a membrane containing poly(ethyleneimine) as a complexing polymer

The performances of a PVA/PEI complexing membrane for the removal of Hg(II) from aqueous solutions were investigated by performing sorption and filtration experiments. This membrane, that was previously shown to ensure efficient sorption of the heavy metal ions Pb(II), Cd(II) and Cu(II) at pH 5, presented a higher affinity for Hg(II) at pH 2.5. The sorption equilibrium was satisfactorily represented by the Langmuir model. In view of possible application to the treatment of industrial wastewaters, the effects of parameters such as pH, temperature, water hardness, and the presence of complexing chloride anions were investigated. The effect of increasing temperature was not straightforward: the complexation equilibrium constant decreased, but the mass of mercury sorbed increased, probably due to the higher mobility of the polymer chains that made internal sites available for complexing mercury. The maximum retention capacity of the membrane was 311 mg Hg g⁻¹. Also, operating at large calcium or chloride concentrations was not detrimental to the membrane performances. For regeneration of the membrane, a 0.05 M solution of EDTA is recommended on the basis of limited performance loss. When used in the filtration mode, the elimination ratio of Hg(II) was close to 99%.     

Removal and preconcentration of lead(II), cadmium(II) and chromium(III) ions from wastewater samples using surface functionalized magnetite nanoparticles

The potential removal and preconcentration of lead(II), cadmium(II), and chromium(III) ions from wastewaters were investigated and explored. Magnetite nanoparticles were chemically modified with p-nitro aniline. The aniline-coated magnetite nanoparticles (ANMNPs) were fully characterized by FT-IR, XRD, SEM, and TEM measurements. Batch studies were performed to address various experimental parameters for the removal and determination of these ions. ANMNPs showed high tendency to investigated metal ions, in this order: Cr(III) > Cd(II) > Pb(II), owing to the strong contribution of surface loaded aniline. The potential applications of ANMNPs adsorbent for removal and preconcentration of Pb(II), Cr(III), and Cd(II) from wastewaters as well as drinking tap water samples were successfully accomplished giving recovery values of (98–101 %), without any noticeable interference of the wastewater or drinking tap water matrices.     

Polyhapto-aromatic interactions in lead(II) coordination

In its crystalline form, the Pb(II) complex of 1,3-diphenylpropane-1,3-dionate (dibenzoylmethanide, DBM(-)) can be regarded as containing polymeric chains of centrosymmetric, dimeric Pb(2)(DBM)(4) units linked through hexahapto interactions of the Pb atoms with phenyl groups from adjacent units. Each Pb atom also appears to be involved in intraunit dihapto-aromatic interactions, thus attaining a total hapticity of thirteen. Comparison with the analogous Sn(II) compound indicates that the unusually high coordination number may reflect the capacity of Pb(II) to act as both a Lewis acid and a Lewis base.     

Energetics of lead(II), cadmium(II) and zinc(II) complexes with amino acids

The molar heat capacity and the standard (p ⁰ = 0.1 MPa) molar enthalpies of formation of the crystalline of bis(glycinate)lead(II), Pb(gly)₂; bis(dl-alaninate)lead(II), Pb(dl-ala)₂; bis(dl-valinate)lead(II), Pb(dl-val)₂; bis(dl-valinate)cadmium(II), Cd(dl-val)₂ and bis(dl-valinate)zinc(II), Zn(dl-val)₂, were determined, at T = 298.15 K, by differential scanning calorimetry, and high precision solution-reaction calorimetry, respectively. The standard molar enthalpies of formation of the complexes in the gaseous state, the mean molar metal–ligand dissociation enthalpies, M(II)–amino acid, \( \langle D_{\text{m}} \rangle \)(M–L), were derived and compared with analogous copper(II)–ligand and nickel(II)–ligand.θθ

M(II)–amino acid	\( \Updelta_{\text{f}} H_{\text{m}}^{\text{o}} \)(cr)/kJ mol?1
Bis(glycinate)lead(II), Pb(gly)2	?998.9 ± 1.9
Bis(dl-alaninate)lead(II), Pb(ala)2	?1048.7 ± 1.8
Bis(dl-valinate)lead(II), Pb(val)2	?1166.3 ± 2.5
Bis(dl-valinate)cadmium(II), Cd(val)2	?1243.7 ± 2.7
Bis(dl-valinate)zinc(II), Zn(val)2	?1306.1 ± 2.3

     

Coordination polymer of cadmium(II) iodide with tetramethylpyrazine

Compound [CdI₂(Me₄Pyz)] is synthesized by the reaction of CdI₂ with tetramethylpyrazine (Me₄Pyz, C₈H₁₂N₂), and its structure is determined (CIF file CCDC 1538646). The crystals are monoclinic, space group C2/c, a = 14.732(3), b = 11.084(2), c = 7.792(2) Å, ß = 95.27(3)°, V = 1267.0(4) Å, ?_calcd = 2.634 g/cm³, Z = 4. Polymer chains [CdI₂(Me₄Pyz)]_221e extended along the direction [001] are formed in the structure of the complex due to the bridging iodine atoms. The coordination polyhedron of the Cd²⁺ ion is a trigonal bipyramid with four bridging iodine atoms and one nitrogen atom of the organic ligand lying in the equatorial plane along with two iodine atoms. The distance between the cadmium atoms in the chain is 4.155 Å.     

Redox magnetohydrodynamics enhancement of stripping voltammetry of lead(II), cadmium(II) and zinc(II) ions using 1,4-benzoquinone as an alternative pumping species

Differential pulse anodic stripping voltammetry (DPASV) coupled with redox-magnetohydrodynamics (MHD) is used to enhance the anodic stripping voltammetry (ASV) response using a mercury thin film-glassy carbon electrode. The sensitivity increased to at least a factor of two (at 1.2 T) and is facilitated by using 20.0 mmol L(-1) 1,4-benzoquinone as an alternative pumping species to enhance ASV by redox-MHD. The MHD force formed by the cross-product of ion flux with magnetic field induces solution convection during the deposition step, enhancing mass transport of the analytes to the electrode surface and increasing their preconcentrated quantity in the mercury thin film. Therefore, larger ASV peaks and improved sensitivities are obtained, compared with analyses performed without a magnet. The influence of pH, 1,4-benzoquinone concentration, accumulation potential, and time are also investigated. Detection limits of 0.05, 0.09 and 2.2 ng mL(-1) Cd(II), Pb(II) and Zn(II) were established with an accumulation time of 65 s. The method is used for the analysis of Cd(II), Pb(II) and Zn(II) in different water samples, certified reference materials, and saliva samples with satisfactory results.     

Catalytic gold nanoparticles for fluorescent detection of mercury(II) and lead(II) ions

In this study, we developed a fluorescence assay for the highly sensitive and selective detection of Hg²⁺ and Pb²⁺ ions using a gold nanoparticle (Au NP)-based probe. The Hg–Au and Pb–Au alloys that formed on the Au NP surfaces allowed the Au NPs to exhibit peroxidase-mimicking catalytic activity in the H₂O₂-mediated oxidation of Amplex UltraRed (AUR). The fluorescence of the AUR oxidation product increased upon increasing the concentration of either Hg²⁺ or Pb²⁺ ions. By controlling the pH values of 5 mM tris–acetate buffers at 7.0 and 9.0, this H₂O₂–AUR–Au NP probe detected Hg²⁺ and Pb²⁺ ions, respectively, both with limits of detection (signal-to-noise ratio: 3) of 4.0 nM. The fluorescence intensity of the AUR oxidation product was proportional to the concentrations of Hg²⁺ and Pb²⁺ ions over ranges 0.05–1 μM (R² = 0.993) and 0.05–5 μM (R² = 0.996), respectively. The H₂O₂–AUR–Au NP probe was highly selective for Hg²⁺ (>100-fold) and Pb²⁺ (>300-fold) ions in the presence of other tested metal ions. We validated the practicality of this simple, selective, and sensitive H₂O₂–AUR–Au NP probe through determination of the concentrations of Hg²⁺ and Pb²⁺ ions in a lake water sample and of Pb²⁺ ions in a blood sample. To the best of our knowledge, this system is the first example of Au NPs being used as enzyme-mimics for the fluorescence detection of Hg²⁺ and Pb²⁺ ions.     

Theoretical studies on magnetic interactions between Cu(II) ions in salen nucleobases

The magnetic and other physical properties between Cu²⁺ ions coordinated by salen–base pairs (Cu²⁺–DNA) are examined by using DFT calculations. In order to consider effects of entanglement and dis-entanglement of the double helix chain, three types of structural disorders i.e. distance, rotation angle and discrepancy in XY-plane, are changed in the model dimer structure. All calculated results show that J_ab values are weak anti-ferromagnetic couplings. It is also found that the J_ab values strongly depend on the salen structure.     

Separation of zinc(II), cadmium(II) and mercury by solvent extraction using thiocarbohydrazide and the complexing agent

The extraction behaviour is reported of zinc(II), cadmium(II) and mercury(II) complexes of thiocarbohydrazide in benzene, chloroform, carbon tetrachloride, di-isopropyl ether, ethyl acetate, amyl acetate, and amyl alcohol. The separation of the three elements has been achieved by the use of various masking agents, as well as by making use of the effect ofpH on their extractability. This work was carried out under CSIR (India) Scheme No. 1 (450/69 GAU. II.     

Complexes of dicamba with cadmium(II), copper(II), mercury(II), lead(II) and zinc(II)

New solid complexes of a herbicide known as dicamba (3,6-dichloro-2-methoxybenzoic acid) with Pb(II), Cd(II), Cu(II) and Hg(II) of the general formula M(dicamba)₂·xH₂O (M=metal, x=0-2) and Zn₂(OH)(dicamba)₃·2H₂O have been prepared and studied. The complexes have different crystal structures. The carboxylate groups in the lead, cadmium and copper complexes are bidentate, chelating, symmetrical, in Hg(dicamba)₂·2H₂O - unidentate, and in the zinc salt - bidentate, bridging, symmetrical. The anhydrous compounds decompose in three stages, except for the lead salt whose decomposition proceeds in four stages. The main gaseous decomposition products are CO₂, CH₃OH, HCl and H₂O. Trace amounts of compounds containing an aromatic ring were also detected. The final solid decomposition products are oxychlorides of metals and CuO. This revised version was published online in July 2006 with corrections to the Cover Date.     

Theoretical studies on magnetic interactions between Cu(II) ions in hydroxypyridone nucleobases

The origin of a ferromagnetic interaction between Cu²⁺ ions in the Cu²⁺–DNA system which reported by Tanaka et al. is examined by using DFT calculations. In order to consider effects of an entanglement and a dis-entanglement of the double helix chain, three types of structural disorders i.e. distance, rotation angle and discrepancy in XY-plane, are considered in the model dimer structure. All calculated results show that J_ab values are weak anti-ferromagnetic couplings. Boltzmann distribution simulation indicates that the high spin (HS) species exist 21% at 1.5 K by thermal excitation within the model structure.     

A polystyrene based membrane electrode for cadmium(II) ions

A polystyrene based membrane of 3,4:12,13-dibenzo-2,5,11,14-tetraoxo- 1,6,10,15-tetraazacyclooctade-cane shows a Nernstian response to Cd(II) ions over a wide concentration range (3.16 x 10(-6) - 1.00 x 10(-1) mol L(-1) with a Nernstian slope of 29.8 mV/decade of concentration, between pH 2.0 and 6.0. This electrode has been found to be chemically inert and of adequate stability with a response time of 20s. The electrode gives reproducible results with a lifetime of 130 days. The membrane works satisfactorily in a partially non-aqueous medium up to a maximum 35% (v/v) content of methanol and ethanol. The practical utility of the proposed chemical sensor has been observed by using it as end-point indicator in the titration of Cd(II) ions with EDTA. The potentiometric selectivity coefficient values indicate that the membrane sensor is highly selective for Cd(II) ions over a number of cations. Small amounts of surfactants do not disturb the functioning of the sensor. This electrode has also been used to estimate cadmium ions in real samples.     

Solution behaviour in alcohols and phase transitions of cadmium(II), mercury(II) and lead(II) carboxylates

Data were obtained for the solution behaviour of cadmium(II) and mercury(II) carboxylates in alcohols. A brief survey of the arguments about the existence of micelles and the current models of surfactant aggregation in non-aqueous media is presented. The plots of solubility against the carboxylate or alcohol chain length are linear for both cadmium and mercury soaps with the solubility having values higher in secondary than primary alcohols. The solution behaviour of metal 9, 10-dihydroxyoctadecanoates shows the effect on solubility, of substitution of dihydroxyl groups at the middle of the carbon chain. Recrystallisation temperatures of the dihydroxyoctadecanoates suggest the loss of stereochemical configuration in solution and indicate similarity in the mode of aggregation. The solution temperatures of cadmium soaps are very close to the temperatures of their phase transitions while those of mercury and lead soaps are lower than their fusion or phase transition temperatures. This behaviour is interpreted to be due to differences in the energy required for the disruption of the crystal structure which dominates the solubility mechanism.     

Adsorption of copper(II), cadmium(II), nickel(II) and lead(II) from aqueous solution using biosorbents

Three types of agricultural waste, citrus maxima peel (CM), passion fruit shell (PF) and sugarcane bagasse (SB), were used to produce biosorbents for removing the heavy metal ions of copper(II), cadmium(II), nickel(II) and lead(II) from a pH 5.0 solution. The properties of biosorbents were characterized using scanning electron microscopy (SEM), zeta potential analyzer, Fourier transform infrared (FTIR) spectroscopy, elemental analyzer and tests of cation exchange capacity (CEC). The result indicated that the selected biosorbents possess rich carboxyl (COOH) and hydroxyl (OH) groups to produce a complexation with the heavy metals. Moreover, the negative surface charge of the biosorbent might adsorb the metal ions through the ion exchange. All of the adsorption isotherms indicated that L-type characters represented complexation and ion exchanges that were the adsorption mechanisms of biosorbents toward heavy metals. Biosorbents with higher oxygen content might generate high adsorption capacities. The adsorption capacities of CM and PF, estimated from the fitting to the Langmuir isotherm, are similar to those reported by others regarding biosorbents.