Electrochemical characterization of self-assembled thiol-porphyrin monolayers on gold electrodes by SECM.

Herein, the scanning electrochemical microscopy (SECM) approach is applied to study the formation of thiol-porphyrin self-assembled monolayer (SAMs). Using cyclic voltammetry (CV), the formation process is characterized adopting different probe molecules. The observed phenomena indicate that the formation process is affected by solution properties and the molecular structure of the probe molecules. In K(3)Fe(CN)(6) , the SAMs show a strong electron-transfer (ET) blocking effect on a pure porphyrin-modified electrode. However, addition of metal ions to the porphyrin molecules leads to ET. A consistent tendency is observed throughout the modification process using CV and SECM methods. Furthermore, k(eff) values, the apparent heterogeneous rate constants, obtained for different modification periods affirm the validity of these results. SECM images are used to collect surface information in the course of the modification process when the substrate potential is 0.5 V versus Ag/AgCl. The effect of the substrate potential indicates that the oxidation of the porphyrin molecules is supported by more positive potentials because of the similar bimolecular reaction of the porphyrin ring with positive charge and the probe molecules with negative charge.     

Photosystem I patterning imaged by scanning electrochemical microscopy

We report the first directed adsorption of Photosystem I (PSI) on patterned surfaces containing discrete regions of methyl- and hydroxyl-terminated self-assembled monolayers (SAMs) on gold. SAM and PSI patterns are characterized by scanning electrochemical microscopy (SECM). The insulating protein complex layer blocks the electron transfer of the SECM mediator, thereby reducing the electrochemical current significantly. Uniformly and densely packed adsorbed protein layers are observed with SECM. Pattern images correlate with our previous studies where we showed that low-energy surfaces (e.g., CH3-terminated) inhibit PSI adsorption in the presence of Triton X-100, whereas high-energy surfaces (e.g., OH-terminated) enable adsorption. Therefore, a SAM pattern with alternating methyl and hydroxyl surface regions allows PSI adsorption only on the hydroxyl surface, and this is demonstrated in the resulting SECM images.     

Microelectrochemical modulation of micropatterned cellular environments

Patterned cell cultures obtained by microcontact printing have been modified in situ by a microelectrochemical technique. It relies on lifting cell-repellent properties of oligo(ethylene glycol)-terminated self-assembled monolayers (SAMs) by Br2, which is produced locally by an ultramicroelectrode of a scanning electrochemical microscope (SECM). After Br2 treatment the SAM shows increased permeability and terminal hydrophobicity as characterized by SECM approach curves and contact angle measurements, respectively. Polarization-modulation Fourier transform infrared reflection-absorption spectroscopic (PM FTIRRAS) studies on macroscopic samples show that the Br2 treatment removes the oligo(ethelyene glycol) part of the monolayer within a second time scale while the alkyl part of the SAM degrades with a much slower rate. The lateral extension of the modification can be limited because heterogeneous electron transfer from the gold support destroys part of the electrogenerated Br2 once the monolayer is locally damaged in a SECM feedback configuration. This effect has been reproduced and analyzed by exposing SAM-modified samples to Br2 in the galvanic cell Au|SAM|5 microM Br2 + 0.1 M Na2SO4||10 microM KBr + 0.1 M Na2SO4|Au followed by an PM FTIRRAS characterization of the changes in the monolayer system.     

Studies of Self-assembled Monolayers Formed by Imidazoline on Iron Surface by SEM and SECM

Self-assembled monolayers (SAMs) formed from organic substances can improve the inhibition of metal corrosion, because uniform and closely packed films formed on the metal surface providing an insulating layer1, 2. SAMs on the iron surface are studied so far because iron is one active metal which is easily corroded in the air. In this paper, SECM and SEM have successfully been applied in the study of SAMs inhibition corrosion for iron. SECM has been used to study the electrochemically a…     

Quantification of the surface diffusion of tripodal binding motifs on graphene using scanning electrochemical microscopy

The surface diffusion of a cobalt bis-terpyridine, Co(tpy)(2)-containing tripodal compound (1·2PF(6)), designed to noncovalently adsorb to graphene through three pyrene moieties, has been studied by scanning electrochemical microscopy (SECM) on single-layer graphene (SLG). An initial boundary approach was designed in which picoliter droplets (radii ~15-50 μm) of the tripodal compound were deposited on an SLG electrode, yielding microspots in which a monolayer of the tripodal molecules is initially confined. The time evolution of the electrochemical activity of these spots was detected at the aqueous phosphate buffer/SLG interface by SECM, in both generation/collection (G/C) and feedback modes. The tripodal compound microspots exhibit differential reactivity with respect to the underlying graphene substrate in two different electrochemical processes. For example, during the oxygen reduction reaction, adsorbed 1·2PF(6) tripodal molecules generate more H(2)O(2) than the bare graphene surface. This product was detected with spatial and temporal resolution using the SECM tip. The tripodal compound also mediates the oxidation of a Fe(II) species, generated at the SECM tip, under conditions in which SLG shows slow interfacial charge transfer. In each case, SECM images, obtained at increasing times, show a gradual decrease in the electrochemical response due to radial diffusion of the adsorbed molecules outward from the microspots onto the unfunctionalized areas of the SLG surface. This response was fit to a simple surface diffusion model, which yielded excellent agreement between the two experiments for the effective diffusion coefficients: D(eff) = 1.6 (±0.9) × 10(-9) cm(2)/s and D(eff) = 1.5 (±0.6) × 10(-9) cm(2)/s for G/C and feedback modes, respectively. Control experiments ruled out alternative explanations for the observed behavior, such as deactivation of the Co(II/III) species or of the SLG, and verified that the molecules do not diffuse when confined to obstructed areas. The noncovalent nature of the surface functionalization, together with the surface reactivity and mobility of these molecules, provides a means to couple the superior electronic properties of graphene to compounds with enhanced electrochemical performance, a key step toward developing dynamic electrode surfaces for sensing, electrocatalysis, and electronic applications.     

Scanning electrochemical microscopy studies of glutathione-modified surfaces. An erasable and sensitive-to-reactive oxygen species surface

A surface sensitive to reactive oxygen species (ROS) was prepared by reduction of a diazonium salt on glassy carbon electrode followed by the chemical coupling of glutathione (GSH) playing the role of an antioxidant species. The presence of active GSH was characterized through spectroscopic studies and electrochemical analysis after labeling of the -SH group with ferrocene moieties. The specific reactivity of GSH vs ROS was evaluated with scanning electrochemical microscopy (SECM) using the reduction of O(2) to superoxide, O(2)(?-), near the GSH-modified surface. Approach curves show a considerable decrease of the blocking properties of the layer due to reaction of the immobilized GSH with O(2)(?-) and the passage of GSH to the glutathione disulfide (GSSG). The initial surface could be regenerated several times with no significant variations of its antioxidant capacity by simply using the biological system glutathione reductase (GR)/NADPH that reduces GSSG back to GSH. SECM imaging shows also the possibility of writing local and erasable micropatterns on the GSH surface by production of O(2)(?-) at the tip probe electrode.     

Combined scanning electrochemical microscopy–Langmuir trough technique for investigating phase transfer kinetics across liquid/liquid interfaces modified by a molecular monolayer

The first combination of scanning electrochemical microscopy (SECM) with a Langmuir trough for liquid/liquid interfaces is described. The technique has been examined and demonstrated through investigations of the effect of monolayers of l-α-phosphatidylcholine, distearoyl (DSPC) on the kinetics of oxygen transfer from decane to water. The stability of monolayers, formed in this way, on the timescale of SECM measurements has been identified as a function of compression speed and subphase composition. Monolayers were stable over a wide range of pressures and molecular areas, but at high compression a decrease in surface pressure with time was observed. This effect was attributed to desorption of the lipid from the interface. In this situation, it was possible to perform SECM measurements (tip-interface approach curves) rapidly under surface pressure control, without causing significant disturbance to the monolayer. DSPC had no detectable effect on the oxygen transfer kinetics when the monolayer was in the liquid-expanded phase, but in the liquid-condensed phase a significant decrease in the rate of oxygen transfer was observed.     

Scanning electrochemical microscope observation of defects in a hexadecanethiol monolayer on gold with shear force-based tip-substrate positioning

Scanning electrochemical microscopy (SECM) was used for imaging of n-hexadecanethiol-modified Au surfaces. In these studies, small defects were observed in the monolayer when a submicrometer electrode was used as an SECM tip, although a cyclic voltammogram of a Au disk electrode showed that the surface of the Au was completely covered with n-hexadecanethiol. The dependence of the SECM images on the potential of the Au electrode was also examined. A comparison of the current at the Au electrode and the tip current in the SECM images showed that direct electron transfer through the monolayer was dominant, rather than electron transfer at the defects. The size of the defects was estimated from the tip current to be 1-100 nm, under the assumption that the defects were small compared to the SECM probe.     

Effect of surface pressure on the insulator to metal transition of a langmuir polyaniline monolayer

A remarkable change in the conductivity of a polyaniline (PAN) Langmuir monolayer in the conducting state, as a function of surface pressure, has been observed using scanning electrochemical microscopy (SECM). The film conductivity, as expressed by the SECM current response of a redox mediator, was measured in-situ in a Langmuir film balance. The conductivity of the film increases significantly with surface pressure, above a threshold value of ca. 20 mN m-1.     

Microstructuring of solid-supported lipid layers using SAM pattern generation by scanning electrochemical microscopy and the chemical lens

To prepare patterns of adsorption sites for alkanethiols with high lateral resolution, we used the scanning electrochemical microscopy (SECM) to etch masks into uniform layers of nickel coated on gold surfaces. The patterning of the nickel mask was accomplished in aqueous solutions by electrogenerating nitric acid out of nitrite at an ultramicroelectrode. Due to the sluggish kinetics of nickel etching in acidic media, the pattern generated by a 10-microm tip was about 50-microm wide, depending on the duration of the etching. As an alternative, applying the principle of the chemical lens by adding potassium hydroxide as a scavenger, the size of the adsorption sites had been reduced to 4 microm, independent of the duration of etching. In a follow-up step, monolayers of 11-mercaptoundecanoic acid were formed on the exposed gold areas of the surface by self-assembly. Fluorescent liposomes containing tetramethylrhodamine-labeled phospholipids were used to create solid-supported lipid layers (SSLLs). These fluorescent liposomes showed a selective binding affinity to the self-assembled monolayers (SAMs) modified areas, but not to the nickel surface. The patterns generated were imaged by the SECM itself, as well as by optical and fluorescence microscopy.     

Microcontact printed diaphorase monolayer on glass characterized by atomic force microscopy and scanning electrochemical microscopy

Micropatterns of diaphorase (Dp) were fabricated on glass substrates by the microcontact printing (μCP) method and characterized with atomic force microscopy (AFM) and scanning electrochemical microscopy (SECM). AFM images of the printed samples revealed that the mean height of the Dp patterns was 3–5 nm, indicating the formation of a monolayer pattern. The Dp molecules on the surface organized themselves into two-dimensional arrays. We used two kinds of inking solutions: Dp–phosphate buffer solution (PBS) (pH 7.0) and Dp–PBS (pH 7.0) with glutaraldehyde (GA, 1% v/v) as a cross-linking reagent. Although the AFM imaging showed high-quality Dp monolayer patterns in both cases, SECM measurements indicated that the enzymatic activity of Dp was almost lost when Dp–PBS with GA was used as the inking solution, whereas clear enzymatic activity was found when Dp–PBS was used.     

High resolution studies of heterogeneous processes with the scanning electrochemical microscope

The focus of this review is on applications of scanning electrochemical microscopy (SECM) to studies of heterogeneous chemical processes and high resolution characterization of the solid/liquid and liquid/liquid interfaces. Recent advances in SECM imaging of surface topography and chemical reactivity are also surveyed.     

维生素B_1自组装膜修饰金电极对多巴胺、尿酸的电催化作用

用维生素B1(VB1)在金电极上进行自组装,制备了VB1自组装膜修饰金电极(VB1-Au/SAMs/CME).利用循环伏安法初步研究了此自组装单分子膜修饰电极的电化学行为.结果表明: VB1在金电极表面具有特性吸附.以\3-/ 4-氧化还原电对为探针,考察了VB1自组装膜修饰金电极的电化学性质, VB1自组装膜的存在对\3-/4-的电子转移具有明显的阻碍作用.研究了多巴胺(DA)和尿酸(UA)在此电极上的电化学行为.实验结果表明, DA和UA在此电极上均可被电催化氧化.差分脉冲伏安(DPV)氧化峰电流与DA浓度在2.0×10-5～4.0×10-4 mol/L范围内呈线性关系;测定UA的线性范围为6.0×10-5～2.2×10-4 mol/L,而且可实现这两种物质的同时测定.     

Electrochemical self-assembly of alkanethiolate molecules on Ni(111) and polycrystalline Ni surfaces

In this work, the electrochemical formation of alkanethiolate self-assembled monolayers (SAMs) on Ni(111) and polycrystalline Ni surfaces from alkanethiol-containing aqueous 1 M NaOH solutions was studied by combining Auger electron spectroscopy (AES), X-ray photoelectron spectroscopy (XPS), electrochemical techniques, and density functional theory (DFT) calculations. Results show that alkanethiolates adsorb on Ni concurrent with NiO electroreduction. The resulting surface coverage depends on the applied potential and hydrocarbon chain length. Electrochemical and XPS data reveal that alkanethiolate electroadsorption at room temperature takes place without S-C bond scission, in contrast to previous results from gas-phase adsorption. A complete and dense monolayer, which is stable even at very high cathodic potentials (-1.5 V vs SCE), is formed for dodecanethiol. DFT calculations show that the greater stability against electrodesorption found for alkanethiolate SAMs on Ni, with respect to SAMs on Au, is somewhat related to the larger alkanethiolate adsorption energy but is mainly due to the larger barrier to interfacial electron transfer present in alkanethiolate-covered Ni. A direct consequence of this work is the possibility of using electrochemical self-assembly as a straightforward route to build stable SAMs of long-chained alkanethiolates on Ni surfaces at room temperature.     

Self-assembled monolayers of electroactive polychlorotriphenylmethyl radicals on Au(111)

Two new polychlorotriphenylmethyl (PTM) derivatives bearing a thioacetate and a disulfide group have been synthesized to anchor on gold substrate. On the basis of these molecules, three strategies were followed to prepare self-assembled monolayers (SAMs) of electroactive PTMs. The resulting SAMs were fully characterized by contact angle, atomic force microscopy (AFM), and time-of-flight secondary ion mass spectroscopy (ToF-SIMS). The high coverage surface and stability of the SAMs were demonstrated by cyclic voltammetry. In addition, the electrochemical experiments proved that these SAMs are bistable since it is possible to reversibly switch between the PTM radical state to the corresponding anion. The magnetic response was investigated by electron paramagnetic resonance. We observed that when the PTM SAMs are in their radical form they confer magnetic functionality to the surface, whereas when they are in the anionic state, the surface is diamagnetic. Thus, the PTM-modified substrates are multifunctional surfaces since they combine magnetic and electroactive properties. The reported results show the high potential of these materials for the fabrication of surface molecular devices.     

Scanning electrochemical microscopy. 59. Effect of defects and structure on electron transfer through self-assembled monolayers

Electron transfer (ET) rate kinetics through n-alkanethiol self-assembled monolayers (SAMs) of alkanethiols of different chain lengths [Me(CH2)nSH; n=8, 10, 11, 15] on Au and Hg surfaces and ferrocene (Fc)-terminated SAMs (poly-norbornylogous and HS(CH2)12CONHCH2Fc) on Au were studied using cyclic voltammetry and scanning electrochemical microscopy (SECM). The SECM results allow determination of the ET kinetics of solution-phase Ru(NH3)63+/2+ through the alkanethiol SAMs on Au and Hg. A model using the potential dependence of the measured rate constants is proposed to compensate for the pinhole contribution. Extrapolated values of koML for Ru(NH3)63+/2+ using the model follow the expected exponential decay (beta is 0.9) for different chain lengths. For a Fc-terminated poly-norbornyl SAM, the standard rate constant of direct tunneling (ko is 189+/-31 s(-1)) is in the same order as the ko value of HS(CH2)12CONHCH2Fc. In blocking and Fc SAMs, the rates of ET are demonstrated to follow Butler-Volmer kinetics with transfer coefficients alpha of 0.5. Lower values of alpha are treated as a result of the pinhole contribution. The normalized rates of ET are 3 orders of magnitude higher for Fc-terminated than for blocking monolayers. Scanning electron microscopy imaging of Pd nanoparticles electrochemically deposited in pinholes of blocking SAMs was used to confirm the presence of pinholes.     

4-Mercaptophenylboronic acid SAMs on gold: comparison with SAMs derived from thiophenol, 4-mercaptophenol, and 4-mercaptobenzoic acid

We report the formation and characterization of self-assembled monolayers (SAMs) derived from the adsorption of 4-mercaptophenylboronic acid (MPBA) on gold. For comparison, SAMs derived from the adsorption of thiophenol (TP), 4-mercaptophenol (MP), and 4-mercaptobenzoic acid (MBA) were also examined. The structure and properties of the SAMs were evaluated by ellipsometry, contact-angle goniometry, polarization-modulation infrared reflection-absorption spectroscopy (PM-IRRAS), and X-ray photoelectron spectroscopy (XPS). Specifically, ellipsometry was used to assess the formation of monolayer films, and contact angle measurements were used to determine the surface hydrophilicity and homogeneity. Separately, PM-IRRAS was used to evaluate the molecular composition and orientation as well as the intermolecular hydrogen bonding within the SAMs. Finally, XPS was used to evaluate the film composition and surface coverage (i.e., packing density), which was observed to increase in the following order: TP < MP < MPBA < MBA. A rationalization for the observed packing differences is presented. The XPS data indicate further that ultrahigh vacuum conditions induce the partial dehydration of MPBA SAMs with the concomitant formation of surface boronic anhydride species. Overall, the analytical data collectively show that the MPBA moieties in the SAMs exist in the acid form rather than the anhydride form under ambient laboratory conditions. Furthermore, stability studies find that MPBA SAMs are surprisingly labile in basic solution, where the terminal B-C bonds are cleaved by the attack of hydroxide ion and strongly basic amine nucleophiles. The unanticipated lability observed here should be considered by those wishing to use MPBA moieties in carbohydrate-sensing applications.     

Electrochemical release of amine molecules from carbamate-based, electroactive self-assembled monolayers

In this paper, carbamate-based self-assembled monolayers (SAMs) of alkanethiolates on gold were suggested as a versatile platform for release of amine-bearing molecules in response to the electrical signal. The designed SAMs underwent the electrochemical oxidation on the gold surface with simultaneous release of the amine molecules. The synthesis of the thiol compounds was achieved by coupling isocyanate-containing compounds with hydroquinone. The electroactive thiol was mixed with 11-mercaptoundecanol [HS(CH(2))(11)OH] to form a mixed monolayer, and cyclic votammetry was used for the characterization of the release behaviors. The mixed SAMs showed a first oxidation peak at +540 mV (versus Ag/AgCl reference electrode), indicating the irreversible conversion from carbamate to hydroquinone groups with simultaneous release of the amine molecules. The analysis of ToF-SIMS further indicated that the electrochemical reaction on the gold surface successfully released amine molecules.     

Interactions of doxorubicin with self-assembled monolayer-modified electrodes: electrochemical, surface plasmon resonance (SPR), and gravimetric studies

We present the results on the partitioning of doxorubicin (DOX), a potent anticancer drug, through the model membrane system, self-assembled monolayers (SAMs) on gold electrodes. The monolayers were formed from alkanethiols of comparable length with different ω-terminal groups facing the aqueous electrolyte: the hydrophobic -CH(3) groups for the case of dodecanethiol SAMs or hydrophilic -OH groups of mercaptoundecanol SAMs. The electrochemical experiments combined with the surface plasmon resonance (SPR) and gravimetric studies show that doxorubicin is likely adsorbed onto the surface of hydrophilic monolayer, while for the case of the hydrophobic one the drug mostly penetrates the monolayer moiety. The adsorption of the drug hinders further penetration of doxorubicin into the monolayer moiety.     

The local electrochemical behavior of the AA2098-T351 and surface preparation effects investigated by scanning electrochemical microscopy

In this work, scanning electrochemical microscopy (SECM) measurements were employed to characterize the electrochemical activities on polished and as-received surfaces of the 2098-T351 aluminum alloy (AA2098-T351). The effects of the near surface deformed layer (NSDL) and its removal by polishing on the electrochemical activities of the alloy surface were evaluated and compared by the use of different modes of SECM. Confocal laser scanning microscopy (CLSM) and scanning electron microscopy (SEM) were also employed to characterize the morphology of the surfaces. The surface chemistry was analyzed by X-ray photoelectron spectroscopy (XPS). The surface generation/tip collection (SG/TC) and competition modes of the SECM were used to study hydrogen gas (H₂) evolution and oxygen reduction reactions, respectively. H₂ evolution and oxygen reduction were more pronounced on the polished surfaces. The feedback mode of SECM was adopted to characterize the electrochemical activity of the polished surface that was previously corroded by immersion in a chloride-containing solution, in order to investigate the influence of the products formed on the active/passive domains. The precorroded surface and as-received surfaces revealed lower electrochemical activities compared with the polished surface showing that either the NSDL or corrosion products largely decreased the local electrochemical activities at the AA2098-T351 surfaces.