Role of coordinated metal ions on the orientation of phthalocyanine based coatings

In the present work, we have investigated the molecular orientation of phthalocyanine films deposited on polycrystalline gold. Three films built from the following molecules are investigated: phthalocyanine (H(2)Pc), cobalt phthalocyanine (CoPc) and copper phthalocyanine (CuPc). The films are prepared by spin coating and drop casting methods. Orientation analysis has been performed using polarization dependent Fourier transform infrared (FTIR) spectroscopy using transmission and grazing angle reflectance mode. The FTIR study suggests that each phthalocyanine film contains both alpha- and beta-phases. H(2)Pc based films demonstrate deposition method dependence on the molecular orientation, while the CuPc and CoPc films preserve their molecular orientation independent of deposition method. Grazing angle analysis also suggests that CoPc films show negligible preferred orientation irrespective of film deposition methods. In literature, the band at 878cm(-1) in CuPc has been assigned to out-of-plane bending of C-H. Our grazing angle experiments suggest that this band cannot be assigned to out-of-plane bending vibrations of C-H. Accurate band assignments are also described here for the phthalocyanine system.     

Dissolution of copper phthalocyanine and fabrication of its nano-structure film

The mono-protonated and di-protonated forms of copper phthalocyanine (CuPc) were obtained by increasing concentrations of trifluoroacetic acid (TFA) solution to a fixed concentration of CuPc solutions. UV-Vis spectrum shows that the Q bands of these two derivatives split and shift to the red, which means successive protonation happened and caused the two derivatives to lose their symmetry. After the protonation step, the solubility of protonated CuPc in organic solvent increased 60 times. The CuPc film was fabricated by the electrophoretic deposition (EPD) method from the protonated CuPc dissolved in nitromethane containing TFA. Scanning electron microscopy (SEM) showed that the deposited CuPc film on the indium tin oxide (ITO) substrate is composed of thread-like nanobelts with diameters between 100 nm and 200 nm. Furthermore, the CuPc film is in α phase with stacking direction (b-axis) parallel to the substrate, which was detected by X-ray diffraction.     

Evolution of ordered films of copper phthalocyanine according to EPR data

The procedure for calculating the orientation distribution of molecules using the angular dependence of EPR spectra was employed to study copper(II) phthalocyanine (CuPc) films varying in thickness and obtained by depositing the molecular complex on flat quartz plates. At the first stage of deposition, a layer of the α-CuPc phase with preferable orientation of molecular stacks along the plate surface is formed. At the second stage, a layer with an orthogonal arrangement of molecular stacks is condensed over the first layer. The interaction with NO₂ forms CuPc binuclear associates. Analysis of the EPR spectra made it possible to determine the symmetry of the structure and the distance between the paramagnetic Cu²⁺ ions; the structure of the associates has been proposed. The orientation distribution of CuPc dimers in the film depends both on the initial ordering in the film and on processing conditions. Strong disordering of molecular stacks in ordered films during the α-CuPc to α-CuPc phase transition has been found.     

酞菁和酞菁铜的三阶非线性光学性质

用INDO/SDCI方法研究了酞菁和酞菁铜的电子结构, 紫外-可见光谱, 三阶非线性光学系数及其色散效应, 发现酞菁铜中Cu^2+对γ的贡献很小, 故酞菁与酞菁铜的γ几乎相等, 我们的计算结果对此进行了合理的解释。     

Vibronic spectra of solutions and sols of copper phthalocyanine

Optical spectra of solutions and sols prepared from finely dispersed crystalline copper phthalocyanine (CuPc) were studied. The CuPc preparation was demonstrated to contain an admixture of an amorphous phase. The amorphous phase proved to be soluble in dioxane and heptane with the formation of a true molecular solution of CuPc. It was found that CuPc molecules are absorbed by polyethylene, polypropylene, polycaproamide, and cellulose triacetate films. The optical spectrum of individual CuPc molecules was demonstrated to differ substantially from those of particles of the pigment. It featured intense vibronic bands belonging to three π → π* transitions typical of aromatic structures and a series of bands characteristics of n → π* transitions involving nitrogen atoms (<29000 cm^?1) but showed no absorption bands characteristic of dispersions of the pigment in the visible spectrum (400–800 cm^?1). It was revealed that the Q-band (λ = 670 nm), assigned in the literature to individual CuPc molecule, in reality belongs to CuPc associates.     

Study on catalytic oxidation of planar binuclear copper phthalocyanine on 2-mercaptoethanol

Mononuclear copper phthalocyanine (CuPc) and binuclear copper phthalocyanine (Cu2Pc2) were synthesized by the phenylanhydride-urea route, and their catalytic oxidation activity on 2-mercaptoethanol was studied. Based on the experimental results, a catalytic mechanism of Cu2Pc2 on 2-mercaptoethanol has been proposed. Furthermore, the effects of pH, Cu2Pc2 concentration, and temperature on the catalytic oxidation activity were evaluated. The results showed that CuPc has no catalytic activity, while Cu2Pc2 has high catalytic oxidation activity towards 2-mercaptoethanol with the optimal activity at pH 11. The reaction can further be enhanced by increasing Cu2Pc2 concentration and temperature, due to its endothermic characteristics.     

Facile one-pot preparation of thermally and photochemically convertible soluble precursors of copper phthalocyanine and naphthalocyanine

Soluble copper phthalocyanine (CuPc) and naphthalocyanine (CuNc) precursors which can be converted thermally and photochemically into insoluble CuPc and CuNc, respectively, have been synthesized by a one-step reaction using commercially available chemicals.     

Electronic structure of copper phthalocyanine: a comparative density functional theory study

We present a systematic density functional theory study of the electronic structure of copper phthalocyanine (CuPc) using several different (semi)local and hybrid functionals and compare the results to experimental photoemission data. We show that semilocal functionals fail qualitatively for CuPc primarily because of underbinding of localized orbitals due to self-interaction errors. We discuss an appropriate choice of functional for studies of CuPc/metal interfaces and suggest the Heyd-Scuseria-Ernzerhof screened hybrid functional as a suitable compromise functional.     

Electrophoretic deposition of phthalocyanine in organic solutions containing trifluoroacetic acid

The absorption spectra of copper phthalocyanine (CuPc) 1,2-dichloroethane (DCE) solutions containing trifluoroacetic acid (TFAA) shows that the number of protons coordinating to the CuPc molecule was 1 and 2 for the first and second proton adducts, respectively, which indicates the formations of CuPcH(+) and CuPcH(2)(2+). This CuPc molecule may act as a catalyst to dissociate TFAA into trifluoroacetate anion (A(-)) and H(+) and form the proton adducts. The electrical conductivity dependence of the solution on CuPc concentration also supports this mechanism. A dense film of CuPc was deposited on an indium tin oxide cathode plate by electrophoresis of the solution. Similar dense films of a wide variety of phthalocyanines (MPc; M = Cu, H(2), Fe, Ni, Zn, Pb, VO) were also deposited using this method. Similar films of CuPc were also formed using dichloromethane (DCM) and 1,1,1-trichloroethane (TCE) in place of DCE. Depositions are ascribed to the migration of positively charged monomers (i.e., protonated MPc). Scanning electron microscopy revealed that these films are composed of fibrous crystallites, size of which was found to increase with the electrophoresis time, the strength of the applied electrical field and the concentration of CuPc in the bath. The influence of the dielectric constant of the organic solvent on the film growth is discussed.     

A new electrode for acid-base titration based on poly(copper phthalocyanine)

Journal of Solid State Electrochemistry - A new electrode based on poly(copper phthalocyanine) (poly(CuPc)) microparticles attached to gold is characterized and introduced as a simple, robust, and...     

Quantum transport effects in copper(II) phthalocyanine sandwiched between gold nanoelectrodes

The electrical transmission of copper(II) phthalocyanine (CuPc) sandwiched between gold nanoelectrodes is studied on the basis of the Green function formalism coupled with the Gaussian-broadening technique. In the Au-CuPc-Au junction, broadened density of states (DOS) of the Au chains is defined as continuous DOS of electrodes to calculate the Green function of the electrodes. Two peaks of the transmission function found in the vicinity of the Fermi level are analyzed in terms of molecular orbitals (MOs). A convenient procedure to analyze MO contribution to a transmission peak is proposed. It is found that (I) symmetry-matched interactions between CuPc and the gold nanoelectrodes are important to the enhancement of the transmission function and (II) the nanoelectrodes have almost no effect on the electronic states of CuPc.     

Properties of copper (fluoro-)phthalocyanine layers deposited on epitaxial graphene

We investigate the atomic structure and electronic properties of monolayers of copper phthalocyanines (CuPc) deposited on epitaxial graphene substrate. We focus in particular on hexadecafluorophthalocyanine (F(16)CuPc), using both theoretical and experimental (scanning tunneling microscopy - STM) studies. For the individual CuPc and F(16)CuPc molecules, we calculated the electronic and optical properties using density functional theory (DFT) and time-dependent DFT and found a red-shift in the absorption peaks of F(16)CuPc relative to those of CuPc. In F(16)CuPc, the electronic wavefunctions are more polarized toward the electronegative fluorine atoms and away from the Cu atom at the center of the molecule. When adsorbed on graphene, the molecules lie flat and form closely packed patterns: F(16)CuPc forms a hexagonal pattern with two well-ordered alternating α and β stripes while CuPc arranges into a square lattice. The competition between molecule-substrate and intermolecular van der Waals interactions plays a crucial role in establishing the molecular patterns leading to tunable electron transfer from graphene to the molecules. This transfer is controlled by the layer thickness of, or the applied voltage on, epitaxial graphene resulting in selective F(16)CuPc adsorption, as observed in STM experiments. In addition, phthalocyanine adsorption modifies the electronic structure of the underlying graphene substrate introducing intensity smoothing in the range of 2-3 eV below the Dirac point (E(D)) and a small peak in the density of states at ～0.4 eV above E(D).     

In situ conductance measurements of copper phthalocyanine thin film growth on sapphire [0001

The current flowing through a thin film of copper phthalocyanine vacuum deposited on a single crystal sapphire [0001] surface was measured during film growth from 0 to 93 nm. The results, expressed as conductance vs. nominal film thickness, indicate three distinct film growth regions. Conductive material forms below about 5 nm and again above 35 nm, but in the intermediate thicknesses the film conductance was observed to decrease with increasing film thickness. With the aid of ac-AFM topology images taken ex situ, the conductance results are explained based on the Stranski-Krastanov (2D + 3D) film growth mechanism, in which the formation of a thin wetting layer is followed by the growth of discrete islands that eventually coalesce into an interpenetrating, conductive network.     

The Crystalline Structure of Copper Phthalocyanine Films on ZnO(11̅00)

The structure of copper phthalocyanine (CuPc) thin films (5-100 nm) deposited on single-crystal ZnO(11?00) substrates by organic molecular beam deposition was determined from grazing-incidence X-ray diffraction reciprocal space maps. The crystal structure was identified as the metastable polymorph α-CuPc, but the molecular stacking was found to vary depending on the film thickness: for thin films, a herringbone arrangement was observed, whereas for films thicker than 10 nm, coexistence of both the herringbone and brickstone arrangements was found. We propose a modified structure for the herringbone phase with a larger monoclinic β angle, which leads to intrastack Cu-Cu distances closer to those in the brickstone phase. This structural basis enables an understanding of the functional properties (e.g., light absorption and charge transport) of (opto)electronic devices fabricated from CuPc/ZnO hybrid systems.     

Study on dispersion stability of copper phthalocyanine (CuPc) blue pigment in water improved by plasma treatments

Oxygen plasma was used to modify the copper phthalocyanine (CuPc) blue pigment. It is effective in improving stability of CuPc pigment in aqueous dispersion. Treatment conditions, e.g., treating time, gas pressure and discharge power, had great influence on the surface properties of pigments. X-ray photoelectron spectroscopy (XPS) indicated that the CuPc blue pigment surface was partially oxidized and polar groups including COH, COOH, C?O were incorporated. Dispersion stability of pigment in water was greatly increased. The plasma modified CuPc blue pigment was applied to on cotton fabric. Rubbing fastness and K/S value of the pigment prints were enhanced.     

Copper Phthalocyanine Layer as an Organic Semiconductor Sensor of NO2 in Air

Abstract

The applicability of copper phthalocyanine (CuPc) as an organic semiconductor gas sensor for the detection of high concentrations of NO₂ in air is the aim of this study. Thin films of CuPc were deposited by sublimation. Measurements were carried out to determine the effect of NO₂ on the conductivity of a CuPc film. A detection method for NO₂ in air is proposed.     

基于p-6P异质诱导生长酞菁铜薄膜的NO2传感器

为实现室温下低浓度NO₂气体检测,制作了p-六联苯(p-6P)诱导层的酞菁铜有机薄膜传感器。利用原子力显微镜(AFM)研究了不同沉积速率下p-6P薄膜的生长规律,慢速沉积提供足够的分子扩散时间,利于薄膜横向生长,形成高度低、尺寸大的晶畴。在p-6P薄膜上生长了酞菁铜薄膜,可以清晰看到晶畴上酞菁铜薄膜的有序排列。利用X射线衍射(XRD)仪,阐明了p-6P对酞菁铜薄膜具有很好的诱导效应。通过对比不同沉积速率p-6P薄膜诱导的酞菁铜传感器性能,发现慢速沉积诱导层的酞菁铜器件有高的响应强度和低的回复时间。异质诱导生长的酞菁铜传感器响应强度是直接生长在二氧化硅上的酞菁铜传感器的2倍,回复时间是3.2 min,对浓度为1.0 × 10^-5的NO₂气体灵敏。     

Matrix effects on copper(II)phthalocyanine complexes. A combined continuous wave and pulse EPR and DFT study

The effect of the electron withdrawing or donating character of groups located at the periphery of the phthalocyanine ligand, as well as the influence of polar and nonpolar solvents are of importance for the redox chemistry of metal phthalocyanines. Continuous wave and pulse electron paramagnetic resonance and pulse electron nuclear double resonance spectroscopy at X- and Q-band are applied to investigate the electronic structure of the complexes Cu(II)phthalocyanine (CuPc), copper(II) 2,9,16,23-tetra-tert-butyl-29H,31H-phthalocyanine (CuPc(t)), and copper(II) 1,2,3,4,8,9,10,11,15,16,17,18,22,23,24,25-hexadecafluoro-29H,31H-phthalocyanine (CuPc(F)) in various matrices. Isotope substitutions are used to determine the g values, the copper hyperfine couplings and the hyperfine interactions with the 14N, 1H and 19F nuclei of the macrocycle and the surrounding matrix molecules. Simulations and interpretations of the spectra are shown and discussed, and a qualitative analysis of the data using previous theoretical models is given. Density functional computations facilitate the interpretation of the EPR parameters. The experimental g, copper and nitrogen hyperfine and nuclear quadrupole values are found to be sensitive to changes of the solvent and the structure of the macrocycle. To elucidate the electronic, structural and bonding properties the changes in the g principal values are related to data from UV/Vis spectroscopy and to density functional theory (DFT) computations. The analysis of the EPR data indicates that the in-plane metal-ligand sigma bonding is more covalent for CuPc(t) in toluene than in sulfuric acid. Furthermore, the out-of-plane pi bonding is found to be less covalent in the case of a polar sulfuric acid environment than with nonpolar toluene or H2Pc environment, whereby the covalency of this bonding is increased upon addition of tert-butyl groups. No contribution from in-plane pi bonding is found.     

Dry etching of copper phthalocyanine thin films: effects on morphology and surface stoichiometry

We investigate the evolution of copper phthalocyanine thin films as they are etched with argon plasma. Significant morphological changes occur as a result of the ion bombardment; a planar surface quickly becomes an array of nanopillars which are less than 20 nm in diameter. The changes in morphology are independent of plasma power, which controls the etch rate only. Analysis by X-ray photoelectron spectroscopy shows that surface concentrations of copper and oxygen increase with etch time, while carbon and nitrogen are depleted. Despite these changes in surface stoichiometry, we observe no effect on the work function. The absorbance and X-ray diffraction spectra show no changes other than the peaks diminishing with etch time. These findings have important implications for organic photovoltaic devices which seek nanopillar thin films of metal phthalocyanine materials as an optimal structure.     

Multi-electron transfer in composite phthalocyanine thin films: structure and electrochromic properties

Both sequentially deposited double-layered and codeposited composite thin films were prepared by using two kinds of phthalocyanines. The structure and the electrochromic property of these thin films were compared with those of simple phthalocyanine films. The structures of the films were analyzed by scanning electron microscopy (SEM), X-ray diffrction (XRD) and electron spin resonance (ESR) spectra. From the viewpoint of morphology and crystallinity, codeposited thin films have the same structure as the simple one, having sharp peaks at ca. 2θ=7.0° in the XRD pattern and narrow crystal grains in SEM photographs. ESR measurements have revealed that phthalocyanine molecules disperse very well in the codeposited thin films in a molecular level in comparison with the physical mixture of phthalocyanine powders. This high dispersibility of the molecules in the codeposited thin films can play a role to improve the reversibility in the electrochromism. Thus, the reversibility of the phthalocyanine, which shows irreversible electrochromism in the simple film form, can be improved by the codeposition with another phthalocyanine with reversible electrochromism. In contrast, sequentially deposted double-layered thin film gives completely different results. The electrochromism of the double-layered film depends on the property of the simple phthalocyanine thin film which is in contact with the substrate.