Cyclometalated platinum(II) diimine complexes: synthetically tuning the photophysical and electrochemical properties

Presented is the synthesis of an array of 16 heteroleptic phosphorescent diimine complexes of platinum(II) with electronically diverse ligand spheres and their full spectroscopic, photophysical, and electrochemical characterization. The complexes were found to exhibit luminescence (480-500 nm) in deaerated solutions at room temperature from a long-lived (3)LC state (τ = 2-3 μs) that exhibits significant metal character perturbed by a low-lying (1)MLCT state. Interestingly, emission from a (3)MLCT state was not observed as is the case with many other polypyridine-based d-block complexes. Electrochemical intermediates proved stable as multiple reversible reductions between -1 and -2 V vs. SCE were noted during cyclic voltammetry experiments unveiling the potential of these luminophores for use in a variety of optoelectronic and solar energy conversion applications.     

Synthesis, structure and photophysical properties of a flavin-based platinum(II) complex

We synthesized a thiosemicarbazone-functionalized flavin (Fl-(H)TSC: 2-[2-(3,4-dihydro-7,8-dimethyl-2,4-dioxobenzo[g]pteridin-10(2H)-yl)ethylidene]-hydrazinecarbothioamide) and its Pt(II) complex [Pt(Fl-TSC)(2)], and characterized it using X-ray diffraction, UV-visible absorption and luminescence spectroscopy. X-ray structural analysis for [Pt(Fl-TSC)(2)] revealed that the structure of the isoalloxazine part was almost the same as that in lumiflavin (7,8,10-trimethylisoalloxazine), and the thiosemicarbazone moiety acted as a bidentate ligand to form a PtS(2)N(2) planar conformation. UV-visible absorption and luminescence spectra of these compounds were very similar to those of riboflavin, but the emission intensity and the lifetime decreased considerably. Theoretical calculations suggested that the charge-separated state (Fl˙(-)-TSC˙(+)) contributed to the faster quenching from the (1)π-π* emission state.     

Palladium(II)- and platinum(II)phenyl-2,6-bis(oxazole) pincer complexes: syntheses, crystal structures, and photophysical properties

Phenyl-2,6-bis(oxazole) ligands have been explored for the synthesis of novel palladium(II) and platinum(II) pincer complexes. The materials were characterized by spectroscopic methods and by X-ray crystallography. Investigations of the photophysical properties revealed that the lowest triplet states of the materials are largely centred at the bis(oxazole) ligands. The platinum(II) compounds are moderately emissive in fluid solution at ambient temperature. Introduction of both strong donors and strong acceptors leads to a significant red shift of the emission. Due to the facile synthesis of bis(oxazole) based complexes with electronically tuneable oxazole moieties, these materials might be promising alternatives to the well-established phenyl-2,6-bipyridyl systems.     

The crystal and molecular structure oftrans-Di(methylsulphito)bis-(triphenylphosphine)platinum(II)

Summary The crystal and molecular structure oftrans-di(methylsulphito)bis(triphenylphosphine)platinum(II), Pt(SO₃Me)₂ (PPh₃)₂, derived from the reaction of Pt(PPh₃)₂ (O₂) with SO₂ in MeOH and in the presence of sodium tetraphenylborate(III), has been determined from diffractometer data. The complex crystallizes in the space group P ¯1- (C_i ¹) with one molecule in a unit cell of dimensionsa = 9.744(2) Å,b = 10.062(3) Å,c = 11.153(2) Å; = 68.59(2)°, = 82.69(2)° and = 62.25(2)°. Leastsquares refinement has led to a value of the conventional R index (on F) of 0.031 for the 3308 reflections having F²>3(F₀ ²). The complex is a typical square-planar platinum(II) complex with the platinum atom lying on a crystallographically imposed centre of symmetry. The important structural parameters are Pt-P 2.369(1) Å, Pt-S 2.308(1) Å, and the oxygen atoms complete an approximate tetrahedron about the sulphur atoms with S-O 1.448(5) Å and S-O(Me) 1.620(5) Å.     

Lowest electronic excited states of platinum(II) diimine complexes

Absorption and emission spectra of Pt(diimine)L2 complexes (diimine = 2,2'-bipyridine (bpy) or 4,4'-dimethyl-2,2'-bipyridine (dmbpy); L = pyrazolate (pz-), 3,5-dimethylpyrazolate (dmpz-), or 3,4,5-trimethylpyrazolate (tmpz-)) have been measured. Solvent-sensitive absorption bands (370-440 nm) are attributed to spin-allowed metal-to-ligand charge-transfer (1MLCT) transitions. As solids and in 77 K glassy solution, Pt(bpy)(pz)2 and Pt(dmbpy)(pz)2 exhibit highly structured emission systems (lambda max approximately 494 nm) similar to those of the diprotonated forms of these complexes. The highly structured bands (spacings 1000-1400 cm-1) indicate that the transition originates in a diimine-centered 3(pi-->pi*) (3LL) excited state. The intense solid-state and 77 K glassy solution emissions from 3MLCT[d(Pt)-->pi*(bpy)] excited states of complexes with dmpz- and tmpz- ligands occur at longer wavelengths (lambda max = 500-610 nm), with much broader vibronic structure. These findings are consistent with increasing electron donation of the pyrazolate ligands, leading to a distinct crossover from a lowest 3LL to a 3MLCT excited state.     

New tridentate cyclometalated platinum(II) and palladium(II) complexes of N,2-diphenyl-8-quinolinamine: syntheses, crystal structures, and photophysical properties

A new tridentate cyclometalated platinum(II) complex derived from N,2-diphenyl-8-quinolinamine, which consists of two crystallographic independent molecules with two intermolecular N-H-Cl-Pt hydrogen bonds forming a dimer, exhibited a low-energy luminescence at ca. 740 nm in a 1 × 10⁻³ M dichloromethane solution and a strong emission centered at 670 nm in a solid state, but the analogous palladium(II) complex was nonemissive at room temperature.     

Synthesis, photophysical and electrophosphorescent properties of fluorene-based platinum(II) complexes

A series of platinum(II) complexes bearing tridentate cyclometalated C^N^N (C^N^N=6-phenyl-2,2'-bipyridine and π-extended R-C^N^N=3-[6'-(naphthalen-2'-yl)pyridin-2'-yl]isoquinoline) ligands with fluorene units have been synthesised and their photophysical properties have been studied. The fluorene units are incorporated into the cyclometalated ligands by a Suzuki coupling reaction. An increase in the π-conjugation of the cyclometalated ligands confers favourable photophysical properties compared to the 6-phenyl-2,2'-bipyridine analogues. The fluorene-based platinum(II) complexes display vibronic-structured emission bands with λ(max)=558-601 nm, and high emission quantum yields up to 0.76 in degassed dichloromethane. Their emissions are tentatively assigned to excited states with mixed (3)IL/(3)MLCT parentage (IL=intraligand, MLCT=metal-to-ligand charge transfer). The crystal structures of these platinum(II) complexes reveal extensive Pt(II)···π and/or π-π interactions. The fluorene-based platinum(II) complexes are soluble in organic solvents, have high thermal stability with decomposition temperature >350 °C, and can be thermally vacuum-sublimed or solution-processed as phosphorescent dopants for the fabrication of organic light-emitting diodes (OLEDs). A monochromic OLED with 3d as dopant (2 wt%) fabricated by vacuum deposition gave a current efficiency of 14.7 cd A(-1) and maximum brightness of 27000 cd m(-2). A high current efficiency (9.2 cd A(-1)) has been achieved in a solution-processed OLED using complex 3f (5 wt%) doped in a PVK (poly(9-vinylcarbazole)) host.     

Synthesis, characterization, crystal structure, and electrochemical, photophysical, and protein-binding properties of luminescent rhenium(I) diimine indole complexes

We report the synthesis, characterization, and photophysical and electrochemical properties of a series of luminescent rhenium(I) diimine indole complexes, [Re(N-N)(CO)3(L)](CF3SO3) (N-N = 3,4,7,8-tetramethyl-1,10-phenanthroline (Me4-phen), L = N-(3-pyridoyl)tryptamine (py-3-CONHC2H4-indole) (1a), N-[N-(3-pyridoyl)-6-aminohexanoyl]tryptamine, (py-3-CONHC5H10CONHC2H4-indole) (1b); N-N = 1,10-phenanthroline (phen), L = py-3-CONHC2H4-indole (2a), py-3-CONHC5H10CONHC2H4-indole (2b); N-N = 2,9-dimethyl-1,10-phenanthroline (Me2-phen), L = py-3-CONHC2H4-indole (3a), py-3-CONHC5H10CONHC2H4-indole (3b); N-N = 4,7-diphenyl-1,10-phenanthroline (Ph2-phen), L = py-3-CONHC2H4-indole (4a), py-3-CONHC5H10CONHC2H4-indole (4b)), and their indole-free counterparts, [Re(N-N)(CO)3(py-3-CONH-Et)](CF3SO3) (py-3-CONH-Et = N-ethyl-(3-pyridyl)formamide; N-N = Me4-phen (1c), phen (2c), Me2-phen (3c), Ph2-phen (4c)). The X-ray crystal structure of complex 3a has also been investigated. Upon irradiation, most of the complexes exhibited triplet metal-to-ligand charge-transfer (3MLCT) (d pi(Re) --> pi*(diimine)) emission in fluid solutions at 298 K and in low-temperature glass. However, the structural features and long emission lifetimes of the Me4-phen complexes in solutions at room temperature suggest that the excited state of these complexes exhibited substantial triplet intraligand (3IL) (pi --> pi*) (Me4-phen) character. The binding interactions of these complexes to indole-binding proteins including bovine serum albumin and tryptophanase have been examined.     

Syntheses, crystal structure and spectroscopic characterization of new platinum(II) dithiocarbimato complexes

The reaction of 4-iodobenzenesulfonamide or 4-fluorobenzenesulfonamide with CS₂ and KOH in dimethylformamide yielded the potassium N-R-sulfonyldithiocarbimates, K₂(RSO₂NCS₂) [R = 4-IC₆H₄ (1) and 4-FC₆H₄ (2)]. These salts reacted with K₂[PtCl₄] in water/methanol to yield complex anions bis(N-R-sulfonyldithiocarbimato)platinate(II), which were isolated as their tetrabutylammonium salts, (Bu₄N)₂[Pt(RSO₂NCS₂)₂] [R = 4-IC₆H₄ (3) and 4-FC₆H₄ (4)]. The structures of 2–4 were determined by X-ray crystallography. The Pt²⁺ in both complexes 3 and 4 lies at the inversion centre and the PtS₄ moiety has a distorted square-planar configuration. The compounds were also characterized by IR, ¹H NMR and ¹³C NMR spectroscopies, and elemental analyses. The molar conductance data are consistent with the fact that 3 and 4 are dianionic complexes.     

Platinum(II) diimine complexes with catecholate ligands bearing imide electron-acceptor groups: synthesis, crystal structures, (spectro)electrochemical and EPR studies, and electronic structure

A series of catechols with attached imide functionality (imide = phthalimide PHT, 1,8-naphthalimide NAP, 1,4,5,8-naphthalenediimide NDI, and NAP-NDI) has been synthesized and coordinated to the Pt (II)(bpy*) moiety, yielding Pt(bpy*)(cat-imide) complexes (bpy* = 4,4'-di- tert-butyl-2,2'-bipyridine). X-ray crystal structures of PHT and NAP complexes show a distorted square-planar arrangement of ligands around the Pt center. Both complexes form "head-to-tail" dimers in the solid state through remarkably short unsupported Pt...Pt contacts of 3.208 (PHT) and 3.378 A (NAP). The Pt(bpy*)(cat-imide) complexes are shown to combine optical (absorption) and electrochemical properties of the catecholate (electron-donor) and imide (electron-acceptor) groups. The complexes show a series of reversible reduction processes in the range from -0.5 to -1.9 V vs Fc (+)/Fc, which are centered on either bpy* or imide groups, and a reversible oxidation process at +0.07 to +0.14 V, which is centered on the catecholate moiety. A combination of UV-vis absorption spectroscopy, cyclic voltammetry, UV-vis spectroelectrochemistry, and EPR spectroscopy has allowed assignment of the nature of frontier orbitals in Pt(bpy*)(cat-imide) complexes. The HOMO in Pt(bpy*)(cat-imide) is centered on the catechol ligand, while the LUMO is localized either on bpy* or on the imide group, depending on the nature of the imide group involved. Despite the variations in the nature of the LUMO, the lowest-detectable electronic transition in all Pt(bpy*)(cat-imide) complexes has predominantly ligand-to-ligand (catechol-to-diimine) charge-transfer nature (LLCT) and involves a bpy*-based unoccupied molecular orbital in all cases. The LLCT transition in all Pt(bpy*)(cat-imide) complexes appears at 530 nm in CH2Cl2 and is strongly negatively solvatochromic. The energy of this transition is remarkably insensitive to the imide group present, indicating lack of electronic communication between the imide and the catechol moieties within the cat-imide ligand. The high extinction coefficient, approximately 6 x 10(3) L mol(-1) cm(-1) of this predominantly LLCT transition is the result of the Pt orbital contribution, as revealed by EPR spectroscopy of the complexes in various redox states. The CV profile of the oxidation process of Pt(bpy*)(cat-imide) in CH2Cl2 and DMF is concentration dependent, as was shown for NDI and PHT complexes as typical examples. Oxidation appears as a simple diffusion-limited process at low concentrations, with an increasing anodic-to-cathodic peak separation eventually resolving as two independent consecutive waves as the concentration of the complex increases. It is suggested that aggregation of the complexes in the diffusion layer in the course of oxidation is responsible for the observed concentration dependence. Overall, the Pt(bpy*)(cat-imide) complexes are electrochromic compounds in which a series of stepwise reversible redox processes in the potential range from 0.2 to -2 V (vs Fc (+)/Fc) leads to tuneable absorbencies between 300 and 850 nm.     

Synthesis,crystal structure and biological properties of a cis‐dichloridobis(diimine)copper(II) complex

The mechanisms of interaction of inorganic complexes with DNA are important in the design and development of new metal‐based drug molecules. The limitations of cis‐platin have encouraged the design and development of new metal‐based target‐specific anticancer drugs having reduced side effects. The complex cis‐dichloridobis(1,2,5‐thiadiazolo[3,4‐f][1,10]phenanthroline‐κ²N¹,N¹⁰)copper(II), [CuCl₂(C₁₂H₆N₄S)₂], has been synthesized and characterized. The complex crystallizes in the monoclinic space group C2/c. The covalent binding of the complex with DNA was studied by absorption spectroscopy. The anticancer activity of the complex on the Human Lung Carcinoma (A549) cell line was investigated by MTT assay. The complex exhibits higher toxicity than cis‐platin and induces an apoptotic mode of cell death.     

Facile synthesis, structure, and luminescence properties of Pt(diimine)bis(arylacetylide) chromophore-donor dyads

The luminescent complex Pt(dpphen)bis(arylacetylide) complex (1) (dpphen = 4,7-diphenylphenanthroline and arylacetylide = 4-ethynylbenzaldehyde) has been synthesized and characterized structurally and spectroscopically. Complex 1 has been employed in the synthesis of donor-chromophore (D-C) dyads through Schiff base condensations of different anilines to give imine-linked dyads 2-4 and through imine reduction with borohydride, to give the corresponding amine-linked dyads 2a-4a. Crystal structure determinations of 1-4 and 4a establish a distorted square-planar geometry around the Pt(II) ion in each system with cis arylacetylide ligands and a diimine-constrained N-Pt-N bond angle of ca. 79.5 degrees. Complex 1 is strongly emissive having a relative quantum yield (phi) of 36% and an excited-state lifetime of 3.1 micros. In accord with the notion of photoinduced electron transfer from the aniline-based donor to the photoexcited chromophore, the emission of dyads 2-4 and 2a-4a is effectively quenched in all solvents tested. The intense absorption at 400 nm (30000-70000 L/mol.cm) for 2 and 2a has been assigned as an intraligand pi-pi* transition, whereas the lowest-energy transitions for all other dyads correspond to Pt-to-pi(diimine) MLCT transitions. Although the dyads can be synthesized in a facile manner, photolysis experiments reveal that both the imine and amine linkages are photochemically unstable, resulting in hydrolysis and regeneration of the aldehyde-containing chromophore 1.     

Synthesis, structures and photophysical properties of luminescent copper(I) and platinum(II) complexes with a flexible naphthyridine-phosphine ligand

Condensation of Ph(2)PH and paraformaldehyde with 2-amino-7-methyl-1,8-naphthyridine gave the new flexible tridentate ligand 2-[N-(diphenylphosphino)methyl]amino-7-methyl-1,8-naphthyridine (L). Reaction of L with [Cu(CH(3)CN)(4)]BF(4) and/or different ancillary ligands in dichloromethane afforded N,P chelating or bridging luminescent complexes [(L)(2)Cu(2)](BF(4))(2), [(micro-L)(2)Cu(2)(PPh(3))(2)](BF(4))(2) and [(L)Cu(CNN)]BF(4) (CNN = 6-phenyl-2,2'-bipyridine), respectively. Complexes [(L)(2)Pt]Cl(2), [(L)(2)Pt](ClO(4))(2) and [(L)Pt(CNC)]Cl (CNC = 2,6-biphenylpyridine) were obtained from the reactions of Pt(SMe(2))(2)Cl(2) or (CNC)Pt(DMSO)Cl with L. The crystal structures and photophysical properties of the complexes are presented.     

Computational studies on the photophysical properties and NMR fluxionality of dinuclear platinum(II) A-frame alkynyl diphosphine complexes

The structural geometry, electronic structure, photophysical properties, and the fluxional behavior of a series of A-frame diplatinum alkynyl complexes, [Pt(2)(μ-dppm)(2)(μ-C≡CR)(C≡CR)(2)](+) [R = (t)Bu (1), C(6)H(5) (2), C(6)H(4)Ph-p (3), C(6)H(4)Et-p (4), C(6)H(4)OMe-p (5); dppm = bis(diphenylphosphino)methane], have been studied by density functional theory (DFT) and time-dependent TD-DFT associated with conductor-like polarizable continuum model (CPCM) calculations. The results show that the Pt···Pt distance strongly depends on the binding mode of the alkynyl ligands. A significantly shorter Pt···Pt distance is found in the symmetrical form, in which the bridging alkynyl ligand is σ-bound to the two metal centers, than in the unsymmetrical form where the alkynyl ligand is σ-bound to one metal and π-bound to another. For the two structural forms in 1-5, both the highest occupied molecular orbital (HOMO) and the lowest unoccupied molecular orbital (LUMO) energy levels show a dependence on the nature of the substituents attached to the alkynyl ligand. The energies of the HOMO and LUMO are found to increase and decrease, respectively, from R = (t)Bu to R = Ph and to R = C(6)H(4)Ph-p, because of the increase of the π- conjugation of the alkynyl ligand. On the basis of the TDDFT/CPCM calculations, the low-energy absorption band consists of two types of transitions, which are ligand-to-ligand charge-transfer (LLCT) [π(alkynyl) → σ*(dppm)]/metal-centered MC [dσ*(Pt(2)) → pσ(Pt(2))] transitions as well as interligand π → π* transition from the terminal alkynyl ligands to the bridging alkynyl ligand mixed with metal-metal-to-ligand charge transfer MMLCT [dσ*(Pt(2)) → π*(bridging alkynyl)] transition. The latter transition is lower in energy than the former. The calculation also indicates that the emission for the complexes originates from the triplet interligand π(terminal alkynyls) → π*(bridging alkynyl)/MMLCT [dσ*(Pt(2)) → π*(bridging alkynyl)] excited state. In terms of the fluxional behavior, calculations have been performed to study the details of the mechanisms for the three fluxional processes, which are the σ,π-alkynyl exchange, the ring-flipping, and the bridging-to-terminal alkynyl exchange processes.     

Blue-emitting platinum(II) complexes bearing both pyridylpyrazolate chelate and bridging pyrazolate ligands: synthesis, structures, and photophysical properties

A new Pt(II) dichloride complex [Pt(fppzH)Cl2] (1), in which fppzH = 3-(trifluoromethyl)-5-(2-pyridyl)pyrazole, was prepared by the treatment of a pyridylpyrazole chelate fppzH with K2PtCl4 in aqueous HCl solution. Complex 1 could further react with its parent pyrazole (pzH), 3,5-dimethylpyrazole (dmpzH), or 3,5-di-tert-butylpyrazole (dbpzH) to afford the monometallic [Pt(fppz)(pzH)Cl] (2), [Pt(fppz)(dmpzH)Cl] (3), [Pt(fppz)(dmpzH)2]Cl (4), or two structural isomers with formula [Pt(fppz)(dbpzH)Cl] (5a,b). Single-crystal X-ray diffraction studies of 2, 4, and 5a,b revealed a square planar Pt(II) framework, among which a strong interligand hydrogen bonding occurred between fppz and pzH ligands in 2. This interligand H-bonding is replaced by dual N-H...Cl interaction in 4 and both intermolecular N-H...O (with THF solvate) and N-H...Cl interaction in 5a,b, respectively; the latter are attributed to the bulky tert-butyl substituents that force the dbpzH ligand to adopt the perpendicular arrangement. Furthermore, complex 2 underwent rapid deprotonation in basic media to afford two isomeric complexes with formula [Pt(fppz)(mu-pz)]2 (6a,b), which are related to each other according to the spatial orientation of the fppz chelates, i.e., trans- and cis-isomerism. Similar reaction exerted on 3 afforded isomers 7a,b. Both 6a,b (7a,b) are essentially nonemissive in room-temperature fluid state but afford strong blue phosphorescence in solid state prepared via either vacuum-deposited thin film or 77 K CH2Cl2 matrix. As also supported by the computational approaches, the nature of emission has been assigned to be ligand-centered triplet pipi* mixed with certain metal-to-ligand charge-transfer character.     

Synthesis, structure, and photophysical properties of luminescent platinum(II) complexes containing cyclometalated 4-styryl-functionalized 2-phenylpyridine ligands

A series of new luminescent cyclometalated platinum(II) complexes functionalized with various substituted styryl groups on the cyclometallating ligand [Pt(C/\N-ppy-4-styryl-R)(O/\O-(O)CCR'CHCR'C(O))] (ppy-4-styryl-R = E-4(4-(R)styryl-2-phenylpyridine) (3, R' = Me (acac); 4, R' = (t)Bu (dpm); R = H, OMe, NEt2, NO2) have been prepared. All complexes undergo an E-Z photoisomerization process in CH2Cl2 solution under sunlight, as monitored by 1H NMR. The solid-state structures of 3-OMe, 3-NEt2, 3-NO2, and 4-OMe have been determined by X-ray diffraction studies and compare well with optimized geometries obtained by density functional theory (DFT) calculations. The orbital pictures of 3-H, 3-OMe, and 3-NO 2 are very similar, the highest occupied molecular orbital (HOMO) being highly Pt(5d) metal-based. For 3-NMe2, an additional contribution from the amino-styryl fragment leads to a decreased metal parentage of the HOMO, suggesting a predominantly ILCT character transition. Complexes 3-H, 3-OMe, and 3-NO2 show a low-energy band (350-400 nm) assigned to predominantly charge-transfer transitions. The amino derivative 3-NEt2 displays a very strong absorption band at 432 nm, tentatively assigned to a mixture of ILCT (Et2N --> CH=CH) and metal-to-ligand charge-transfer (MLCT) (dpi(Pt) --> pi) transitions. Complexes 3 are weakly luminescent in CH2Cl2 solution at room temperature; the low intensity may be due to a competitive quenching through the E-Z photoisomerization process. All complexes exhibit similar structured emission bands under these conditions (around 520 nm), independent of the nature of the styryl-R group. In a frozen EPA glass (77 K), the spectrum of the representative complex 3-H exhibits two sets of vibronically structured bands (460-560, 570-800 nm; lambda(max) = 596 nm), due to the presence of two emitting species, the E and Z isomers, which have significantly different triplet excited-state energies. The other three complexes show similar behavior to 3-H at 77 K, but the lower-energy emission bands are progressively red-shifted in the order H < OMe < NO2 < NEt2 (e.g., for 3-NEt2, lambda(max)(em) = 658 nm; tau = 26 micros). The very large red-shift compared to related unsubstituted complexes (e.g., to [Pt(C/\N-ppy)(O/\O-acac)]) is the result of the extension of the pi-conjugated system and the electronic effects of substituent R.     

Electronic structures and photophysical properties of phosphorescent platinum (II) complexes with tridentate C^N*N cyclometalated ligands

To get an insight into the structure–property relationships in a series of strongly phosphorescent platinum(II) complexes with tridentate C^N*N cyclometalated ligands, their electronic structures and electroluminescence properties were systematically investigated via density functional theory and time‐dependent density functional theory. Moreover, the factors related to the radiative and non‐radiative decay process, including the transition electric dipole moment μ(S_n), the energy difference between singlet and lowest triplet excited states ΔE(S_n–T₁) and the spin–orbital coupling matrix elements $?S_n\left|{\stackrel{?}{H}}_{\mathrm{SOC}}\right|T_1?$, as well as the energy gap between T₁ and S₀ states ΔE(T₁–S₀) and absorption–emission Stokes shifts have been calculated. Fine emission color tuning and high phosphorescence quantum yield of phosphorescent complexes may be achieved through introducing five–six‐membered metallacycle geometries and linking a substituent (such as phenyl) at bridge atoms. Additionally, phosphorescent properties of these complexes show a clear dependence on the electronegativity of bridge atoms.     

Synthesis, crystal structures, and photophysical properties of electron-accepting diethynylindenofluorenediones

A series of 6,12-bis[(trialkylsilyl)ethynyl]indeno[1,2-b]fluorene-5,11-diones has been synthesized. X-ray crystallographic analysis of these compounds reveals that triisopropylsilyl (TIPS) substitution on the alkyne terminus affords the largest number of intermolecular π-π interactions in the solid state. Conversely, use of trialkylsilyl groups smaller or larger than TIPS furnishes a variety of crystal-packing motifs that contain fewer π-π interactions. Electrochemical and photophysical data suggest that these molecules are excellent electron-accepting materials.