共查询到20条相似文献,搜索用时 31 毫秒
1.
In this paper, the interaction of DNA molecules with aqueous CdTe quantum dots (CdTe QDs), CdTe/SiO2 composite nanoparticles (CdTe/SiO2 NPs), and Mn-doped ZnSe quantum dots (Mn:ZnSe d-dots) was studied with ethidium bromide as a probe. The purpose of this work was to study the damage of DNA molecules induced by these three kinds of water-soluble nanoparticles. It was found that ionic strength, pH value and UV irradiation influenced the PL emission properties of CdTe QDs, CdTe/SiO2 NPs and Mn:ZnSe d-dots, and also influenced the interaction of DNA molecules with them. Among the three kinds of nanoparticles, DNA molecules were most easily damaged by CdTe QDs whether in the dark or under UV irradiation. The CdTe/SiO2 NPs led to much less DNA damage when compared with CdTe QDs, as a silica overcoating layer could isolate the QDs from the external environment. Mn:ZnSe d-dots as a new class of non-cadmium doped QDs demonstrated almost no damage for DNA molecules, which have great potentials as fluorescent labels in the applications of biomedical assays, imaging of cells and tissues, even in vivo investigations. 相似文献
2.
Hydrophobic Mn-doped ZnS quantum dots (Mn:ZnS d-dots) were made to be water soluble by coating a monolayer of mercaptopropionic acid (MPA). It is found that the PL efficiency of Mn:ZnS d-dots with various shell thicknesses were all improved after thiol (MPA) ligand exchange. We attribute their PL enhancement to the effective surface passivation induced by the thiol ligand and significantly decrease of holes transfer from d-dots to ligands. The PL QY of as-synthesized thiol-coated d-dots can reach as high as 50%. These efficient, stable, and water soluble d-dots are confirmed to be suitable for biomedical applications. 相似文献
3.
Unlike Mn doped quantum dots (d-dots), the emission color of Cu dopant in Cu d-dots is dependent on the nature, size, and composition of host nanocrystals (NCs). The tunable Cu dopant emission has been achieved via tuning the particle size of host NCs in previous reports. In this paper, for the first time we doped Cu impurity in Zn(x)Cd(1-x)S alloyed NCs and tuned the dopant emission in the whole visible spectrum via variation of the stoichiometric ratio of Zn/Cd precursors in the host Zn(x)Cd(1-x)S alloyed NCs. A facile noninjection and low cost approach for the synthesis of Cu:Zn(x)Cd(1-x)S d-dots was reported. The optical properties and structure of the obtained Cu:Zn(x)Cd(1-x)S d-dots have been characterized by UV-vis spectroscopy, photoluminescence (PL) spectroscopy, transmission electron microscopy (TEM), and X-ray diffraction (XRD). The influences of various experimental variables, including Zn/Cd ratio, reaction temperature, and Cu dopant concentration, on the optical properties of Cu dopant emission have been systematically investigated. The as-prepared Cu:Zn(x)Cd(1-x)S d-dots did show PL emission but with quite low quantum yield (QY) (typically below 6%). With the deposition of ZnS shell around the Cu:Zn(x)Cd(1-x)S core NCs, the PL QY increased substantially with a maximum value of 65%. More importantly, the high PL QY can be preserved when the initial oil-soluble d-dots were transferred into aqueous media via ligand replacement by mercaptoundeconic acid. In addition, these d-dots have thermal stability up to 250 °C. 相似文献
4.
Manganese-doped zinc sulfide quantum dots (Mn:ZnS d-dots) with high optical quality, pure dopant emission of 55-65% photoluminescence quantum yield, were synthesized in octadecene media with generic starting materials, namely, zinc (manganese) carboxylic acid salts, S powder, and dodecanethiol (DDT) based on a "nucleation doping" strategy. The optical properties and structure of the obtained Mn:ZnS d-dots have been characterized by UV-vis, photoluminescence (PL) spectroscopy, transmission electron microscopy (TEM), and X-ray diffraction (XRD). The resulting nearly monodisperse d-dots were found to be of spherical shape with a zinc-blende crystal structure. The influences of various experimental variables, including the reaction temperature for the MnS core nanocluster and ZnS host material, the amount of octadecene (ODE)-S, DDT, as well as Zn/Mn ratio have been systematically investigated. The use of DDT as capping ligand ensured the reproducible access to a stable small-sized MnS core. This paves the way for reproducibly obtaining highly luminescent d-dots. Programmed overcoating temperature for growth of ZnS shell was employed to realize balanced diffusion of the Mn ions in the d-dots. 相似文献
5.
In this paper, we report the successful use of non-cadmium-based Mn-doped ZnSe d-dots (Mn/ZnSe) as highly efficient and nontoxic
optical probes for human prostate cancer cells imaging. Mn/ZnSe d-dots are directly prepared in aqueous solution. The α-methylacyl-CoA
racemase (AMACR) is overexpressed in prostate cancers; the presence of antibodies specific for AMACR is more sensitive and
specific than serum prostate specific antigen levels in distinguishing patients with prostate cancers. Mn/ZnSe d-dots were
linked to anti-AMACR to form Mn/ZnSe d-dots-anti-AMACR bioconjugates for the direct prostate cancer cell imaging. 3-(4,5-Dimethylthiazol-2-yl)-2
and 5-diphenyl tetrazolium bromide assay demonstrated that Mn/ZnSe d-dots exhibited favorable cytocompatibility to LNCaP cells
with high concentration (1 mM) and long-time incubation (24 h). Furthermore, cellular imaging results demonstrated that Mn/ZnSe
d-dots were remarkably efficacious for high-specificity cell imaging. The antibody-mediated delivery of the bioconjugates
was further confirmed by the observation of no fluorescence signals in vitro targeting in nonprostate-cancer-based cell lines
which are negative for AMACR. Mn/ZnSe d-dots as non-cadmium-based safe and efficient optical imaging nanoprobes could therefore
be used for targeting imaging and treatment of cancers in the early stage. 相似文献
6.
High-quality Mn doped ZnS d-dots were successfully synthesized via an alternative route based on the solvothermal method using oleic acid as stabilizing agent. X-ray diffraction (XRD), transmission electron microscopy (TEM) as well as photoluminescence (PL) spectra were employed to characterize the obtained samples. The as-obtained d-dots are highly crystalline and uniform sized, and they can be well dispersed in hexane to form stable and clear colloidal solution. The optical properties of the d-dots with different Mn doped concentration are investigated in detail. The Mn doped ZnS d-dots have two emission bands, including surface state emission (blue) and Mn emission (orange), which are both sensitivity to the Mn doped concentration. By varying the Mn doped concentration, the relative PL intensities of dual-color emissions can be well manipulated, showing their application in tunable color output. Furthermore, a subsequent ligand exchange has been introduced to give the d-dots hydrophilic surfaces, which are favorable for biological applications. 相似文献
7.
In this paper, a novel optical nanoprobe (Mn:ZnSe d-dots-Arg6) for trypsin detection and its inhibitor screening has been constructed successfully based on the fluorescence quenching and recovery of Mn:ZnSe d-dots. Mn:ZnSe d-dots would aggregate in the presence of positively charged Arg6 (six arginine residues) due to electrostatic interactions that result in the fluorescence quenching. Arg6 can be hydrolyzed into small fragments in the presence of trypsin, and accordingly, the aggregation of Mn:ZnSe d-dots can be prohibited, which lead to the fluorescence recovery. Experimental results show that the recovery in fluorescence intensity is linearly proportional to the concentration of trypsin within the range of 0.1–12.0 μg mL−1 with a detection limit of 40 ng mL−1 under the optimized experimental conditions. We also prove the feasibility of fluorescence recovery of Mn:ZnSe d-dots for trypsin detection through the resonance light scattering (RLS) technique. Additionally, the optical nanoprobe can be employed for screening the inhibitors of trypsin. The optical nanoprobe was successfully applied for the determination of trypsin in human serum and urine samples with good accuracy and satisfactory recovery. 相似文献
8.
Synthesis of Optically Active,X‐Shaped,Conjugated Compounds and Dendrimers Based on Planar Chiral [2.2]Paracyclophane,Leading to Highly Emissive Circularly Polarized Luminescence 下载免费PDF全文
Masayuki Gon Prof. Dr. Yasuhiro Morisaki Risa Sawada Prof. Dr. Yoshiki Chujo 《Chemistry (Weinheim an der Bergstrasse, Germany)》2016,22(7):2291-2298
Optically active, Fréchet‐type dendrimers containing an emissive X‐shaped π‐electron system as the core unit were synthesized. Gram‐scale optical resolution and transformations of 4,7,12,15‐tetrasubstituted [2.2]paracyclophanes were also carried out. The high‐generation dendrons effectively absorbed UV light and transferred energy to the core, resulting in high photoluminescence (PL) from the core. In addition, the dendrons sufficiently isolated the emissive X‐shaped conjugated core and bright emission was observed from both thin films and solutions. Intense circularly polarized luminescence (CPL) was observed from the thin film. The dendrimer films exhibited excellent optical properties, such as large molar extinction coefficients, high fluorescence quantum efficiencies, intense PL and CPL, and large CPL dissymmetry factors. 相似文献
9.
Formation mechanism of carbogenic nanoparticles with dual photoluminescence emission 总被引:1,自引:0,他引:1
Krysmann MJ Kelarakis A Dallas P Giannelis EP 《Journal of the American Chemical Society》2012,134(2):747-750
We present a systematic investigation of the formation mechanism of carbogenic nanoparticles (CNPs), otherwise referred to as C-dots, by following the pyrolysis of citric acid (CA)-ethanolamine (EA) precursor at different temperatures. Pyrolysis at 180 °C leads to a CNP molecular precursor with a strongly intense photoluminescence (PL) spectrum and high quantum yield formed by dehydration of CA-EA. At higher temperatures (230 °C) a carbogenic core starts forming and the PL is due to the presence of both molecular fluorophores and the carbogenic core. CNPs that exhibit mostly or exclusively PL arising from carbogenic cores are obtained at even higher temperatures (300 and 400 °C, respectively). Since the molecular fluorophores predominate at low pyrolysis temperatures while the carbogenic core starts forming at higher temperatures, the PL behavior of CNPs strongly depends on the conditions used for their synthesis. 相似文献
10.
For the synthesis of colloidal ternary ZnCdSe nanorods, CdSe nanorods were first prepared under a mixture of tetradecylphosphonic acid/trioctylphosphine oxide surfactants at 250 degrees C, and then ZnSe shell layer was grown onto CdSe nanorods at 180 degrees C, forming CdSeZnSe core/shell nanorods. Green-yellow emitting ternary ZnCdSe nanorods were obtained by a subsequent alloying process at 270 degrees C for 1-3 h through the diffusion of Zn ions into CdSe nanorods. The photoluminescence quantum yield (QY) of ZnCdSe nanorods was 5%-10%, which is higher than that from pristine CdSe nanorods (0.6%). The QY of these alloy nanorods depends on the alloying time and is discussed in terms of compositional disorders and defects produced by the alloying process. The Raman and time resolved photoluminescence spectroscopies were used to understand the detailed alloying process from CdSeZnSe core/shell to ZnCdSe alloy nanorods. 相似文献
11.
Lin YW Hsieh MM Liu CP Chang HT 《Langmuir : the ACS journal of surfaces and colloids》2005,21(2):728-734
This paper describes the synthesis of core-shell CdSe/CdS quantum dots (QDs) in aqueous solution by a simple photoassisted method. CdSe was prepared from cadmium nitrate and 1,1-dimethylselenourea precursors under illumination for up to 3 h using a pulsed Nd:YAG laser at 532 nm. The effects that the temperature and the laser irradiation process have on the synthesis of CdSe were monitored by a series of experiments using the precursors at a Cd:Se concentration ratio of 4. Upon increasing the temperature (80-140 degrees C), the size of the CdSe QDs increases and the time required for reaching a maximum photoluminescence (PL) is shortened. Although the as-prepared CdSe QDs possess greater quantum yields (up to 0.072%) compared to those obtained by microwave heating (0.016%), they still fluoresce only weakly. After passivation of CdSe (prepared at 80 degrees C) by CdS using thioacetamide as the S source (Se:S concentration ratio of 1) at 80 degrees C for 24 h, the quantum yield of the core-shell CdSe/CdS QDs at 603 nm is 2.4%. Under UV irradiation of CdSe/CdS for 24 h using a 100-W Hg-Xe lamp, the maximum quantum yield of the stable QDs is 60% at 589 nm. A small bandwidth (W1/2 < 35 nm) indicates the narrow size distribution of the as-prepared core-shell CdSe/CdS QDs. This simple photoassisted method also allows the preparation of differently sized (3.7-6.3-nm diameters) core-shell CdSe/CdS QDs that emit in a wide range (from green to red) when excited at 480 nm. 相似文献
12.
CdTe/ZnSe核壳量子点免疫层析试纸条检测克伦特罗的研究 总被引:6,自引:0,他引:6
采用巯基丁二酸作为表面修饰剂,水相法合成水溶性的CdTe/ZnSe核壳量子点,然后在N-羟基琥珀酰亚胺(NHS)的作用下,将CdTe/ZnSe核壳量子点与抗克伦特罗多克隆抗体(Anti-CLE pAb)连接。通过凝胶电泳和斑点杂交实验,验证CdTe/ZnSe核壳量子点与Anti-CLE pAb连接成功,并且CdTe/ZnSe-Anti-CLE pAb偶联物能识别克伦特罗-BSA抗原(CLE-BSA)。光谱分析表明,量子点与抗体连接后荧光增强,荧光峰位从628nm红移至635nm。将合成的CdTe/ZnSe-Anti-CLE pAb偶联物作为指示克伦特罗(CLE)分子的荧光标记物,制备出一种用于检测CLE的免疫层析试纸条,其最低检测量可达1μg/L。与ELISA法的对比实验表明,此试纸条能应用于CLE残留的快速检测。 相似文献
13.
Liu FC Cheng TL Shen CC Tseng WL Chiang MY 《Langmuir : the ACS journal of surfaces and colloids》2008,24(5):2162-2167
Alloyed ZnxCd1-xSe quantum dots (QDs) have been successfully prepared at low temperatures by reacting a mixture of Cd(ClO4)2 and Zn(ClO4)2 with NaHSe using cysteine as a surface-stabilizing agent. The photoluminescence (PL) spectra of the alloyed QDs are determined on the basis of the Zn2+/Cd2+ molar ratio, reaction pH, intrinsic Zn2+and Cd2+ reactivities toward NaHSe, concentration of NaHSe, and the kind of thiols. A systematic blue shift in emission wavelength of the alloyed QDs was found with the increase in the Zn mole fraction. This result provides clear evidence of the formation of ZnxCd1-xSe QDs by the simultaneous reaction of Zn2+ and Cd2+ with NaHSe, rather than the formation of separate CdSe and ZnSe nanocrystals or core-shell structure CdSe/ZnSe nanocrystals. The size and inner structure of these QDs are also corroborated by using high-resolution transmission electron microscopy and X-ray powder diffraction. To further understand the formation mechanism, the growth kinetics of Zn0.99Cd0.01Se was studied by measuring the PL spectra at different growth intervals. The results demonstrated that, in the initial stage of growth, Zn0.99Cd0.01Se has a structure with a Cd-rich core and a Zn-rich shell. The post-preparative irradiation of these QDs improved their PL properties, resulting in stronger emission. 相似文献
14.
Zhao X Gorelikov I Musikhin S Cauchi S Sukhovatkin V Sargent EH Kumacheva E 《Langmuir : the ACS journal of surfaces and colloids》2005,21(3):1086-1090
Thiol-capped water-soluble PbS nanocrystals (NCs) stabilized with 1-thioglycerol, dithioglycerol, or a mixture of 1-thioglycerol/dithioglycerol (TGL/DTG) were prepared via one-stage synthesis at room temperature. We found that NCs stabilized with a TGL/DTG mixture show efficient and stable infrared photoluminescence centered in the second "biological window" (1050-1200 nm). Under optimized conditions, full width at half-maximum of the PL emission peak was from 70 to 100 nm. PbS NCs were stable to precipitation and aggregation for the time period from 2 to 3 months when stored in the dark under room temperature. Room-temperature photoluminescence quantum efficiency of NCs was from 7 to 10%. When NCs were stored at 37 degrees C, their PL emission red-shifted, consistent with the NC growth. 相似文献
15.
以溶于十八烯的Se作为Se前驱体,在无膦条件下制备得到了具有较高量子产率的Mn:ZnSe纳米晶.为了进一步提高纳米晶的稳定性和发光强度,运用外延生长的方法进行ZnS壳层包覆并得到了具有核-壳结构的Mn:ZnSe/ZnS纳米晶.X射线衍射、透射电子显微镜及吸收和荧光光谱测试结果表明,该方法合成的Mn:ZnSe纳米晶以及核-壳结构Mn:ZnSe/ZnS纳米晶均为闪锌矿结构,具有良好的单分散性,包覆ZnS外壳层后量子产率可达到60%以上.此外,对ZnS壳层厚度和Mn2+的掺杂量对Mn:ZnSe/ZnS纳米晶发光强度的影响及发光机制也进行了初步讨论. 相似文献
16.
17.
The thermal decomposition of fluorinated single-walled carbon nanotubes (F-SWNTs), known to result in pristine SWNTs, has been investigated by freezing the gaseous products formed at temperatures between 50 and 500 degrees C under high vacuum in an argon matrix at 10-20 K and analyzing the trapped species by IR spectroscopy. The major products of F-SWNT decomposition are carbonyl fluoride (COF2) below 300 degrees C and CF4 above 300 degrees C. For comparison, graphite fluoride is stable thermally up to 300 degrees C under these conditions, and the major gas-phase species at temperatures below 500 degrees C are CF4 and the CF3 radical. F-SWNTs are thermally less stable than graphite fluoride, and etching of the nanotubes is observed at lower thermolysis temperatures. 相似文献
18.
Shen H Wang H Zhou C Niu JZ Yuan H Ma L Li LS 《Dalton transactions (Cambridge, England : 2003)》2011,40(36):9180-9188
Here we report a new "green" method to synthesize Zn(1-x)Cd(x)Se (x = 0-1) and stable red-green-blue tricolor Zn(1-x)Cd(x)Se core/shell nanocrystals using only low cost, phosphine-free and environmentally friendly reagents. The first excitonic absorption peak and photoluminescence (PL) position of the Zn(1-x)Cd(x)Se nanocrystals (the value of x is in the range 0.005-0.2) can be fixed to any position in the range 456-540 nm. There is no red or blue shift in the entire reaction process. Three similar sizes of alloyed Zn(1-x)Cd(x)Se nanocrystals with blue, green, and yellow emissions were successfully selected as cores to synthesize high quality blue, green, and red core/shell nanocrystal emitters. For the synthesis of core/shell nanocrystals with a high quantum yield (QY) and stability, the selection of shell materials has been proven to be very important. Therefore, alternative protocols have been used to optimize thick shell growth. ZnSe/ZnSe(x)S(1-x) and CdS/Zn(1-x)Cd(x)S have been found as an excellent middle multishell to overcoat between the alloyed Zn(1-x)Cd(x)Se core and ZnS outshell. The QYs of the as-synthesized core/shell alloyed Zn(1-x)Cd(x)Se nanocrystals can reach 40-75%. The Cd content is reduced to less than 0.1% for Zn(1 -x)Cd(x)Se core/shell nanocrystals with emissions in the range 456-540 nm. More than 15 g of high quality Zn(1-x)Cd(x)Se core/shell nanocrystals were prepared successfully in a large scale, one-pot reaction. Importantly, the emissions of such thick multishell nanocrystals are not susceptible to ligand loss and stability in various physiological conditions. 相似文献
19.
以硫脲为硫源,采用谷胱甘肽(GSH)和柠檬酸钠(SC)为配体,通过水热法制备了水溶性AgInS2/ZnS(AIS/ZnS)核/壳结构量子点。系统研究了反应温度和配体用量对量子点的合成及其荧光性能的影响。采用X射线衍射(XRD)、透射电子显微镜(TEM)、紫外可见吸收光谱(UV-Vis)和光致发光光谱(PL)分别对量子点的物相、形貌和光学性能进行了表征,并考察了量子点的稳定性。实验结果表明,随着反应温度从70℃升高至90℃,促进了ZnS壳层的形成,有效地钝化了量子点的表面缺陷,获得的AIS/ZnS核/壳量子点的发光强度显著提高,发光峰位从600 nm蓝移至580 nm。配体的添加可以有效地平衡Zn^2+的化学反应活性,减缓ZnS壳层的生长,抑制核壳界面缺陷的形成,还能消除量子点的表面态,当nGSH/nZn^2+=2.0,nSC/nZn^2+=2.5时,AIS/ZnS量子点的荧光性能最佳。此外,AIS/ZnS核/壳结构量子点还具有优异的光学稳定性。 相似文献
20.
本文以谷胱甘肽(GSH)作为表面活性剂,采用两步法,先生成Ag2S核,再生长CdS,得到了高质量的Ag2S-CdS核壳结构水溶性量子点。我们用XRD,TEM,HRTEM和EDS研究了产物的结构,形貌和组分,用紫外可见吸收光谱和荧光发射光谱研究了所得量子点的光学性质,同时考察了反应时间,GSH的量,Ag和S源前驱物的含量对量子点光学性质的影响。实验结果表明量子点稳定性好,荧光寿命长,可在710~718 nm近红外区域发光。在核生长过程中,Ag和S源的含量同时影响量子点的发光位置和强度,而GSH量和壳层生长中S源的量几乎只影响近红外发光强度,发光位置保持不变。不同的量子点光学性质可能来源于量子点中组分及表面缺陷的分布。 相似文献