Formation of macrocycles via ring-closing olefin metathesis

The enhanced metathesis activity of 1,3-dimesityl-4,5-dihydroimidazole-2-ylidene ruthenium carbene catalyst 3 significantly increases the feasibility of synthesizing macrocyclic compounds. Catalyst 3 exhibits sufficient activity in RCM to dimerize alpha,beta-unsaturated ester substrates and afford the corresponding head-to-tail (E,E)-dimeric (and trimeric) macrocycles. The dimerization appears to be under thermodynamic control with the product mixture dependent not only on the electronic and steric nature of the substrate but also on concentration.     

Synthesis of substituted 1-benzazepin-2-ones via ring-closing olefin metathesis

The 1-benzazepin-2-one ring system is an important structural feature of marketed drugs, clinical candidates, and other bioactive molecules. We have developed a new benzazepinone synthesis that employs ring-closing olefin metathesis as a key step. This route provides efficient access to substituted benzazepinones that are difficult to synthesize via existing procedures.     

Synthesis of beta-bisabolol by ring-closing olefin metathesis reaction

A ring-closing olefin metathesis is the key step in the synthesis of the beta-bisabolols.     

Synthesis of cyclitols via ring-closing metathesis

A convenient synthesis of enantiomerically pure and differentially protected l-chiro- and myo-inositols as well as conduritols B and F from 2,3,4-tri-O-benzyl-d-xylopyranose via ring-closing metathesis is reported. The facile synthesis of conduritol B constitutes a short formal synthesis of (−)-cyclophellitol.     

Formal synthesis of optically active ingenol via ring-closing olefin metathesis

The construction of strained carbon skeletons by ring-closing olefin metathesis (RCM) was investigated. With well-designed diene 4, RCM was found to be applicable to the formation of a highly strained inside-outside bicyclo[4.4.1]undecane skeleton of ingenol, a bioactive diterpenoid, and formal total synthesis of optically active ingenol (1) was achieved. The key features of this synthesis are construction of an A-ring by spirocyclization of the ketone with an allylic chloride unit, 26, and ring closure of a B-ring by olefin metathesis. Starting from Funk's keto ester 6, the key intermediate aldehyde 9 in Winkler's total synthesis was synthesized in eight steps in 12.5% overall yield. This strategy of direct cyclization of a strained inside-outside skeleton provided the first easy access to optically active ingenol.     

Stereoselectivity of macrocyclic ring-closing olefin metathesis

[reaction: see text] Macrocyclic ring-closing olefin metathesis using ruthenium catalyst 3 was performed to produce a 14-membered lactone. The E/Z ratio of lactone was high regardless of the R group (auxiliary) or the initial alkene stereochemistry. A kinetic study demonstrates that the high E/Z ratio is due to secondary metathesis reactions that isomerize the product to the thermodynamic E/Z ratio.     

Polycyclic heteroaromatics via hydrazine-catalyzed ring-closing carbonyl–olefin metathesis

The use of hydrazine-catalyzed ring-closing carbonyl–olefin metathesis (RCCOM) to synthesize polycyclic heteroaromatic (PHA) compounds is described. In particular, substrates bearing Lewis basic functionalities such as pyridine rings and amines, which strongly inhibit acid catalyzed RCCOM reactions, are shown to be compatible with this reaction. Using 5 mol% catalyst loadings, a variety of PHA structures can be synthesized from biaryl alkenyl aldehydes, which themselves are readily prepared by cross-coupling.

Hydrazine catalysis enables the ring-closing carbonyl–olefin metathesis (RCCOM) to form polycyclic heteroaromatics, especially those with basic functionality.

Polycyclic heteroaromatic (PHA) structures comprise the core framework of many valuable compounds with a diverse range of applications (Fig. 1A).¹ For example, polycyclic azines (e.g. quinolines) are embedded in many alkaloid natural products, including diplamine² and eupolauramine³ to name just a few. These types of structures are also of interest for their biological activity, such as with the inhibitor of the Src-SH3 protein–protein interaction shown in Fig. 1A.⁴ Many nitrogenous PHAs are also useful as ligands for transition metal catalysis, as exemplified by the widely used ligand 1,10-phenanthroline.⁵ Meanwhile, chalcogenoarenes⁶ such as dinaphthofuran⁷ and benzodithiophene⁸ have attracted high interest for both their medicinal properties⁹ and especially for their potential use as organic light-emitting diodes (OLEDs), organic photovoltaics (OPVs), and organic field-effect transistors (OFETs).¹⁰ These and numerous other examples have inspired the development of a wide variety of strategies to construct PHAs.^1,11–14 Although these approaches are as varied as the structures they target, the wide range of molecular configurations within PHA chemical space and the challenges inherent in exerting control over heteroatom position and global structure make novel syntheses of these structures a topic of continuing interest.Open in a separate windowFig. 1(A) Examples of PHAs. (B) RCCOM strategy for PHA synthesis. (C) Lewis base inhibition for Lewis acid vs. hydrazine catalyzed RCCOM. (D) Hydrazine-catalyzed RCCOM for PHA synthesis.One potentially advantageous strategy for PHA synthesis is the use of ring-closing carbonyl–olefin metathesis¹⁵ (RCCOM) to forge one of the PHA rings, starting from a suitably disposed alkenyl aldehyde precursor 2 that can be easily assembled by cross-coupling (Fig. 1B). In related work, the application of RCCOM to form polycyclic aromatic hydrocarbons (PAHs) was reported by Schindler in 2017.¹⁶ In this case, 5 mol% FeCl₃ catalyzed the metathesis of substrates to form phenanthrenes and related compounds in high yields at room temperature. This method was highly attractive for its efficiency, its use of an earth-abundant metal catalyst, and the production of benign acetone as the only by-product. Nevertheless, one obvious drawback to the use of Lewis acid activation is that the presence of any functionality that is significantly more Lewis basic than the carbonyl group can be expected to strongly inhibit these reactions (Fig. 1C). Such a limitation thus renders this method incompatible with a wide swath of complex molecules, especially PHAs comprised of azine rings. This logic argues for a mechanistically orthogonal RCCOM approach that allows for the synthesis of PHA products with a broader range of ring systems and functional groups.We have developed an alternative approach to catalytic carbonyl–olefin metathesis that makes use of the condensation of 1,2-dialkylhydrazines 5 with aldehydes to form hydrazonium ions 6 as the key catalyst–substrate association step.^17–19 This interaction has a much broader chemoorthogonality profile than Lewis acid–base interactions and should thus be much less prone to substrate inhibition than acid-catalyzed approaches. In this Communication, we demonstrate that hydrazine-catalyzed RCCOM enables the rapid assembly of PHAs bearing basic functionality (Fig. 1D).For our optimization studies, we chose biaryl pyridine aldehyde 7 as the substrate (20 salt 11 was also productive (entry 2), albeit somewhat less so. Notably, iron(iii) chloride generated no conversion at either ambient or elevated temperatures (entries 3 and 4). Trifluoroacetic acid (TFA) was similarly ineffective (entry 5). Meanwhile, a screen of various solvents revealed that, while the transformation could occur in a range of media (entries 6–9), THF was optimal. Finally, by raising the temperature to 90 °C (entry 10) or 100 °C (entry 11), up to 96% NMR yield (85% isolated yield) of adduct 8 could be obtained in the same time period.Optimization studies^a

Synthesis of substituted benzenes and phenols by ring-closing olefin metathesis

New synthetic approaches to substituted aromatic compounds are reported. Ring-closing olefin metathesis (RCM)/dehydration and RCM/tautomerization are the key processes in the synthesis of substituted benzenes 3 and phenols 6, respectively. Readily accessible 1,5,7-trien-4-ols 7, which are the precursors of benzenes, were prepared from beta-halo-alpha,beta-unsaturated aldehydes 11 or beta-halo-alpha,beta-unsaturated esters 19 by utilizing reliable transformations in which cross-coupling with vinylic metal reagents 12 and allylation with allylic metal reagents 13 were employed as carbon-carbon bond forming reactions. RCM of 7, followed by dehydration, afforded a wide variety of substituted benzenes 3. In addition, RCM of 1,5,7-trien-4-ones 9, which were prepared by oxidation of 7, furnished various substituted phenols 6 by automatic tautomerization.     

Synthesis of diversely functionalized pyrrolizidines and indolizidines using olefin ring-closing metathesis

Various nitrogen-fused tricyclic compounds, having benzoindolizidine and benzopyrrolizidines ring systems were synthesized via ene-ene metathesis using the first and second-generation Grubbs catalyst. The ene-ene metathesis proceeded smoothly in refluxing CH₂Cl₂ with 3.0 mol % of G₁, giving good yields (78-86%) of the benzoindolizidine products 12a,b. The benzopyrrolizidine 6 was prepared after optimization in 64% yield by using 5.0+5.0 mol % of G₂. The resulting olefin moiety of the indolizidine framework is a suitable precursor for polyhydroxy structures via the Sharpless process. The structures of the polyhydroxylated adducts were determined by ¹H NMR spectra and single-crystal X-ray analysis.     

Total synthesis of (-)-aspidospermine via diastereoselective ring-closing olefin metathesis

An enantiocontrolled total synthesis of (-)-aspidospermine has been achieved. The key element of the strategy is the diastereoselective construction of the quaternary stereogenic center employing 1,4-asymmetric induction during the ring-closing olefin metathesis.     

Synthesis of cyclic proline-containing peptides via ring-closing metathesis

[reaction: see text] Several dienes embedded in di- and tripeptides which incorporate proline have been prepared and subjected to ring-closing metathesis. Bicyclic peptides of well-defined amide geometry and of varying ring sizes were prepared. Several limitations of the cyclization step were revealed.     

Synthesis of 2,6-dideoxysugars via ring-closing olefinic metathesis

[formula: see text] Grubbs' RuCl2 (=CHPh)(PCy3)2 (catalyst 1) and RuCl2(=CHPh)(PCy3)(IMess) (catalyst 2) complexes have been successfully utilized in the construction of beta,gamma-unsaturated delta-lactones containing various substitution patterns of methyl groups. Asymmetric dihydroxylation followed by reduction leads to 3,4-cis-dihydroxy-2,6-dideoxypyranoses, which have proven to play very important biological roles as key components of natural products.     

Synthesis of a cryptand with tetrahedral connectivity using multiple ring-closing olefin metathesis

By connecting six terminal olefins sequentially in one molecule under metathesis conditions, three macrocycles were formed efficiently in one pot yielding a novel cryptand with tetrahedral connectivity.     

Synthesis of sialic acids via desymmetrization by ring-closing metathesis

Formal total syntheses of the naturally occurring deaminated sialic acids KDN (2), a potential oncofetal antigen, and N-acetylneuraminic acid (Neu5Ac, 1), the most naturally abundant sialic acid, have been accomplished in 46% and 9.3% overall yield, respectively, via a novel ketalization/ring-closing metathesis sequence. The rapid introduction of all oxygen and nitrogen functionality in a completely stereocontrolled manner exploited a rigid 6,8-dioxabicyclo[3.2.1]oct-2-ene template. The 2,7-anhydro-KDN derivative 40 served as an advanced intermediate in each of the two syntheses.     

Synthesis of novel dinucleosides via tandem cross-metathesis and ring-closing metathesis

Two novel cyclic dinucleosides having two butylene linkers between the 5′-OH and N-3 positions (thereby generating a 24-membered ring) were synthesized from uridine via tandem cross-metathesis and ring-closing metathesis. Selective synthesis of one dinucleoside with a link between the two N-3 atoms and a link between the two 5′-OH groups was achieved.     

Synthesis of cyclic sulfamoyl carbamates and ureas via ring-closing metathesis

Synthetic routes to a diverse set of cyclic sulfamoyl carbamates and ureas are reported. These routes utilize 3-component coupling, Mitsunobu alkylation, and ring-closing metathesis using the second-generation Grubbs catalyst to achieve the synthesis of the target S-heterocyclic compounds. Cyclic S-heterocycles ranging from 9- to 11-membered rings have been obtained.     

Synthesis of resorcinylic macrocycles related to radicicol via ring-closing metathesis

Novel resorcinylic macrolides, for example, 17, 24, were prepared via ring-closing metathesis as analogues of the HSP90 inhibitor radicicol.