聚合物前驱体制备层状SiC纳米棒的光学性质

采用聚硅氮烷前驱体在高温常压下热裂解方法制备了SiC纳米棒。透射电镜图表明SiC纳米棒中包含有独特的层状结构,电子能谱表明SiC纳米棒中的C ∶ Si组分比接近1 ∶ 1。用X射线衍射和喇曼光谱表征了SiC纳米棒的结构和成分,层状结构为6H-SiC和3C-SiC交替形成所致。利用光致发光谱在该层状结构中观察到强的紫外发射,认为强而锐的紫外发射峰是来源于厚度比较均一的6H-SiC层。     

GdF_3∶Eu~(3+)纳米晶的VUV荧光性质

利用微乳液水热法制备出GdF3∶Eu3+纳米晶及纳米棒。用X射线粉末衍射(XRD)和透射电子显微镜(TEM)等手段对材料的结构、形态及粒径大小等进行了表征。室温下真空紫外(VUV)光谱及荧光光谱表明GdF3∶Eu3+纳米晶中的Gd3+离子吸收一个光子,并将能量分两步传递给Eu3+,发生了双光子发射。从各跃迁的积分强度和量子效率表达式可以得到材料在160 nm紫外光激发下的量子效率约为170%。     

GdF3:Eu3+纳米晶的VUV荧光性质

利用微乳液水热法制备出GdF3：Eu^3＋纳米晶及纳米棒。用X射线粉末衍射（XRD）和透射电子显微镜（TEM）等手段对材料的结构、形态及粒径大小等进行了表征。室温下真空紫外（vuv）光谱及荧光光谱表明GdF3：Eu^3＋纳米晶中的Gd^3＋离子吸收一个光子,并将能量分两步传递给Eu^3＋,发生了双光子发射。从各跃迁的积分强度和量子效率表达式可以得到材料在160nm紫外光激发下的量子效率约为170％。     

一维有序ZnO纳米棒阵列的制备与表征

通过改进传统水热法的密闭、高压的条件,在非密闭、常压环境下在氧化铟锡玻璃衬底上自组装生长了取向高度一致并且分散性好的ZnO纳米棒阵列.首先将乙酸锌溶胶旋涂到氧化铟锡玻璃衬底上,经热处理得到致密的ZnO纳米晶薄膜,然后将其垂直放入前驱体溶液中通过化学溶液沉积生长得到ZnO纳米棒阵列.室温条件下,对样品进行了SEM和XRD的测试.表明生成的氧化锌纳米棒阵列沿c轴取向,实现了定向生长,且纳米棒结晶较好,为六方纤锌矿结构,直径约为40 nm,长度达到微米量级.室温下的吸收光谱表明,由此方法得到的纳米棒纯度较高,有强的紫外吸收.室温下,观测到了该有序ZnO纳米棒阵列在387 nm处强的窄带紫外发射,半高宽小于30 nm,在468 nm处还有一强度较弱的蓝光发射峰.     

利用金作为反射镜的氧化锌纳米棒光泵激光

通过水热法在溅射了一层金的Si片上生长了ZnO纳米棒。实验观察到ZnO纳米棒的室温光致发光谱中出现了强的紫外发射峰,同时还伴随有弱的缺陷相关的发射,这表明通过该种方法生长的ZnO纳米棒晶体质量较好。同时,通过光泵浦也观察到了ZnO纳米棒中的激光发射。当激发光功率密度超过阈值,且进一步增加时则出现多个发射峰,其积分强度随着激发功率密度的增大呈非线性增长,进一步表明存在受激发射。利用金属层作为反射镜可以进一步降低损耗,从而达到降低阈值的目的。     

nc-Si/SiO2多层膜的制备及蓝光发射

在等离子体增强化学气相淀积(PECVD)系统中，采用a-Si∶H层淀积与原位等离子体氧化相结合的逐层生长的方法成功制备出a-Si∶H/SiO2多层膜 (ML)；利用限制性结晶原理通过两步退火处理使a-Si∶H层晶化获得尺寸可控的nc-Si/SiO2 ML，并观察到室温下的蓝光发射；结合Raman散射和剖面透射电子显微镜技术分析了nc-Si/SiO2 ML的结构特性；通过对晶化样品光致发光谱和紫外-可见光吸收谱的研究，探讨了蓝光发射的起源. 关键词： 纳米硅多层膜 等离子体氧化 蓝光发射 热退火     

Co掺杂ZnO纳米棒的共振拉曼光谱和发光特性

采用X射线衍射(XRD)和透射电子显微镜(TEM)手段对微乳液法合成的Zn0.9Co0.1O纳米棒进行了表征.通过室温下的共振拉曼光谱和光致发光光谱手段,研究了所合成纳米材料的共振拉曼光谱和发光特性,并与体相ZnO的研究结果对比,发现合成的材料具有四阶声子紫外共振拉曼散射,而体相材料只有两阶,并观察到在紫外和可见区域所...     

在双热舟化学气相沉积系统中通过掺In技术生长GaN纳米线和纳米锥

在现有的一台蒸发镀膜机基础上，设计加工了一个双热舟化学气相沉积系统.该系统具有真空度高、升温速度快、源和衬底温度可分别控制等优点，有利于化合物半导体纳米材料的生长.利用该生长系统，通过在生长过程中掺入等电子杂质In作为表面活性剂，分别在Si衬底和3C-SiC/Si衬底上生长出高质量的具有纤锌矿结构的单晶GaN纳米线和纳米尖三棱锥.所得产物通过场发射扫描电子显微镜、高分辨透射电子显微镜、能量色散x射线谱仪、x射线衍射仪，和荧光谱仪进行表征.这里所用的生长方法新颖，生长出的GaN纳米尖三棱锥在场发射和激光方面有潜在的应用价值. 关键词： GaN 纳米结构 透射电子显微镜 光致荧光谱     

两步法制备空间取向高度一致的ZnO纳米棒阵列

采用两步法,即先用磁控溅射在Si(100)表面生长一层ZnO籽晶层、再利用液相法制备空间取向高度一致的ZnO纳米棒阵列.用扫描电子显微镜、X射线衍射、高分辨透射电子显微镜和选区电子衍射对样品形貌和结构特征进行了表征.结果表明,ZnO纳米棒具有垂直于衬底沿c轴择优生长和空间取向高度一致的特性和比较大的长径比,X射线衍射的(XRD)(0002)峰半高宽只有0.06°,选区电子衍射也显示了优异的单晶特性.光致发光谱表明ZnO纳米棒具有非常强的紫外本征发光和非常弱的杂质或缺陷发光特性. 关键词： ZnO纳米棒阵列 ZnO籽晶层 两步法 液相生长     

In掺杂的ZnO纳米棒的共振Raman光谱研究

本文报道In掺杂ZnO纳米棒的成功制备和对其结构以及光荧光性能的详尽研究。在室温条件下ZnO的共振拉曼谱线容易受到很强的荧光干扰, 甚至导致共振拉曼谱线完全被湮没。微量In掺杂入ZnO纳米棒中, 调控紫外发光峰由378 nm(纯ZnO)红移至397 nm; 另外, 在制备过程中引入过量的氧, 在样品中产生大量缺陷, 降低了ZnO的紫外近带边发光峰强度。这两方面导致在室温下可清楚的观察到In掺杂ZnO纳米棒的6阶LO拉曼峰。     

Synthesis of High Quality CdS Nanorods by Solvothermal Process and their Photoluminescence

Large-scale cadmium sulfide (CdS) nanorods with high quality were successfully synthesized by solvothermal method using ethylenediamine (en) aqueous as solvent. The as-obtained product was investigated by X-ray diffractometer (XRD), high-resolution transmission electron microscopy (HRTEM), field emission scanning electron microscopy (FE-SEM), ultraviolet–visible (UV–Vis) spectrum and photoluminescence (PL) spectrum. The length and width of the CdS nanorods were in the range of 1–2 μm, 30–40 nm, respectively. XRD analysis revealed that the crystal structure of the product was hexagonal phase. Photoluminescence measurement showed that the nanobelts have two main emission bands around 470 and 560 nm, which should come from the higher-level transition and the intrinsic transition, respectively.     

Synthesis, structure, and photoluminescence properties of ZnSSe alloy nanorods

ZnSSe alloy nanorods were prepared on gold (Au)-coated Si (100) substrates by the thermal evaporation of a mixture of ZnSe and ZnS powders. The nanorods were straight, 70-150 nm in width, and up to a few tens of micrometers in length. Transmission electron microscopy and X-ray diffraction indicated that the nanorods were ZnSSe single crystals with a wurtzite-type hexagonal close-packed structure. The photoluminescence measurements showed that the ZnSe nanorods had a strong emission band centered at approximately 500 nm in the blue-green region. The blue-green emission band corresponding to the deep-level emission of the ZnSSe nanorods showed no shift. On the other hand, a shoulder of the band in the blue region corresponding to the near-band edge (NBE) emission band shifted continuously from 466 nm to a lower wavelength region with increasing composition x in ZnSe_1−xS_x from 0 to 0.41. The blue-green emission intensity of the ZnSSe nanrods also increased with increasing composition x. The enhancement of blue-green emission might be due to the increase in structural defects, such as dislocations and stacking faults in the nanorods.     

Fabrication of bamboo-shaped GaN nanorods

Bamboo-shaped GaN nanorods were formed through a simple sublimation method. They were characterized by means of X-ray powder diffraction (XRD), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM) and selected-area electron diffraction (SAED). The TEM image showed that the nanorods were bamboo-like. XRD, HRTEM and SAED patterns indicated that the nanorods were single-crystal wurtzite GaN. Received: 8 January 2001 / Accepted: 28 April 2001 / Published online: 20 December 2001     

Controlled synthesis and luminescence properties of LaPO4:Eu phosphors

Uniform single crystal LaPO₄ phosphors were selectively synthesized using a facile hydrothermal method without the aid of templates or catalysts. X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), high resolution transmission electron microscopy (HRTEM), and photoluminescence (PL) spectra were used to characterize the nanocrystal materials. The morphological evolution from nanorods to nanoparticles was brought about by altering the pH. In addition, the crystal structure was changed from hexagonal phase to monoclinic one by increasing the hydrothermal temperature. We propose a possible growth mechanism for LaPO₄ nanorods based on the results of our analyses. Furthermore, we compared the photoluminescence properties of LaPO₄:Eu with different morphologies. The results showed that the fluorescence intensity of monoclinic LaPO₄:Eu nanorods is stronger than that of nanoparticles.     

Synthesis of aligned GaN nanorods on Si (111) by molecular beam epitaxy

Straight and well-aligned GaN nanorods have been successfully synthesized by molecular beam epitaxy (MBE) method. The GaN nanorods have been characterized by field-emission scanning electron microscopy (FE-SEM) equipped with energy dispersive X-ray spectroscopy (EDS), X-ray diffraction (XRD), transmission electron microscopy (TEM) and selected area electron diffraction (SAED). SEM images show that GaN nanorods are constituted with two parts of which shapes are different from each other. The upper part of the nanorod is very thin and its lower part is relatively thick. The XRD and EDS analysis have identified that the nanorods are pure hexagonal GaN with single crystalline wurtzite structure. The TEM images indicate that the nanorods are well crystallized and nearly free from defects. The XRD, HRTEM, and SAED pattern reveal that the growth direction of GaN nanorods is 〈0001〉. The photoluminescence (PL) spectra indicate the good emission property for the nanorods. Finally, we have demonstrated about the two-step growth of the nanorods. PACS 81.07.Bc; 81.05.Ea; 81.15.Hi     

单晶ZnO纳米棒的H2O2辅助水热法制备与表征

以二水醋酸锌和氢氧化钠为起始原料,采用H2O2辅助水热法制备了粒径分布均匀的ZnO纳米棒,用XRD、FTIR、FESEM、HRTEM和SEAD等手段对其进行了表征.结果表明,制备的ZnO纳米棒是单晶体,具有六边形截面并沿[0001]晶体方向生长.光致发光谱(PL)测试结果表明,添加H2O2制得的ZnO纳米棒在390nm...     

Solvothermal synthesis of CdS nanorods using hydroxyethyl cellulose as a template

CdS nanorods were solvothermally produced from Cd(CH₃COO)₂ and S powder using ethylenediamine (en) as a solvent and hydroxyethyl cellulose (HEC) as a template. The phase with hexagonal structure was detected using XRD and SAED, which is in perfect accordance with the results obtained by simulation. SEM, TEM and HRTEM revealed the development of nanorods with a number of atoms arranged in crystal lattices. When the appropriate amount of HEC was used, the longest nanorods, with preferential growth in the [0 0 1] direction, were produced. Raman spectra showed the fundamental and overtone modes at the same wavenumbers of 301 and 599 cm⁻¹, respectively. Their relative intensities at each temperature were strongly influenced by the anisotropic geometry of the products. Photoluminescence caused by electron-hole recombination was detected at 470 nm, and by surface trapping induced emission at 575 nm. The formation mechanism of CdS nanorods was also proposed based on the experimental results.     

Synthesis of flower-shape clustering GaN nanorods by ammoniating Ga2O3 films

Flower-shape clustering GaN nanorods are successfully synthesized on Si（111） substrates through ammoniating Ga2O3/ZnO films at 950℃. The as-grown products are characterized by x-ray diffraction （XRD）, scanning electron microscope （SEM）, field-emission transmission electron microscope （FETEM）, Fourier transform infrared spectrum （FTIR） and fluorescence spectrophotometer. The SEM images demonstrate that the products consist of flower-shape clustering GaN nanorods. The XRD indicates that the reflections of the samples can be indexed to the hexagonal GaN phase and HRTEM shows that the nanorods are of pure hexagonal GaN single crystal. The photoluminescence （PL） spectrum indicates that the GaN nanorods have a good emission property. The growth mechanism is also briefly discussed.     

Scalable synthesis of Sb(III)Sb(V)O4 nanorods from Sb2O5 powder via solvothermal processing

Scalable Sb(III)Sb(V)O₄ nanorods from Sb₂O₅ powder were prepared using solvothermal route. XRD and HRTEM demonstrate that the nanorods are single-crystal orthorhombic-Sb₂O₄ phase with several micrometers long and 200-300 nm diameter size. XPS result further shows that the antimony cations in the nanorods are composed of three valence and five valence antimony ions. The emission of the nanorods appears around 450 nm wavelength. The formation mechanism of the Sb(III)Sb(V)O₄ nanorods was discussed in detail.     

Uniformity study of wafer-scale InP-to-silicon hybrid integration

β-SiC nanowires were synthesized by a simple carbothermal reduction of carbonaceous silica xerogel. The morphology and structure of the nanowires were investigated by X-ray diffraction, scanning electron microscope and transmission electron microscopy. The results showed that the nanowires were hexagonal prism-shaped hierarchical nanostructures. The typical stacking faults and twin defects of SiC nanowires were also observed. Band-gap characterization and photoluminescence properties of SiC nanowires were investigated by UV-vis absorption spectroscopy and fluorescence photometry, respectively. The results showed the SiC nanowire was an indirect transition semiconductor and the band gap energy for the SiC nanowires was 2.85 eV. The photoluminescence peak value at 470 nm (2.64 eV) originating from the SiC nanowires was a little higher than the value of band-gap energy.