FT-IR and XRD analysis of natural Na-bentonite and Cu(II)-loaded Na-bentonite

Na-bentonite has been studied extensively because of its strong adsorption capacity and complexation ability. In this work, surface area, total pore volume, mean pore diameter, TG, DTA, FT-IR and XRD were carried out in order to reveal the characteristics of natural Na-bentonite. XRD and FT-IR of natural Na-bentonite (China) and Cu-loaded Na-bentonite as a function of Na-bentonite dosage and temperature using batch technique were characterized in detail, respectively.     

人血清白蛋白与Cu(II)配合物的生物活性研究

Cu(II)配合物很有可能成为下一代的抗肿瘤药物。本文以2-氨基-5-氯苯酚和2-喹啉甲醛合成的席夫碱作为配体,与Cu(II)络合形成配合物1。分别对配合物1和其与人血清白蛋白(HSA)的复合物HSA-1进行体外抗肿瘤测试,发现HSA能提高配合物1的抗肿瘤活性,并降低了对正常细胞的毒性。通过线粒体膜电位等实验,可以推断出配合物1是通过线粒体通路诱导癌细胞凋亡。     

Structural effects of Cu(II)-coordination in the octapeptide region of the human prion protein

The copper-binding ability of the prion protein is thought to be central to its function. The structural effects of copper coordination in the octapeptide region of the human prion protein have been investigated by molecular dynamics simulations. Simulations were performed with the apo state, in order to investigate the behavior of the region without copper ions, as well as with the octapeptide region in the presence of copper ions. While the structure of the apo state is greatly influenced by the interaction between the rings in the histidine, tryptophan and proline residues, the region shows evidence of highly ordered coordination sites in the presence of copper ions. The position of the tryptophan indole ring is stabilized by cation-pi interactions. Two stable orientations of the indole ring with respect to the equatorial coordination plane of copper were observed, which showed that the indole ring can reside on both sides of the coordination plane. The interaction with the indole ring was found to occur without a mediating axial water molecule.     

Binding affinity studies of 1,2,3-triazole copper(II) complexes to human serum albumin

Abstract

Two copper(II) complexes with tetradentate 1,4-disubstituted-1,2,3-triazole ligands, [CuL(MeCN)](ClO₄)₂ (1) and [CuL′](ClO₄)₂ (2), have been prepared and characterized by different techniques, including X-ray structure determination, spectroscopic, and electrochemical measurements, as reported elsewhere. Herein, we report the interactions of these complexes, and corresponding free ligands, with human serum albumin (HSA) verifying their relative thermodynamic stability and differences in binding to this protein. Interactions with HSA were verified by CD measurements monitored at 564?nm, up to stoichiometric ratio 2:1 [Complex]:[protein], according to competitive equilibria involving the insertion of copper at the selective N-terminal metal binding site in HSA, and additionally at a secondary nonselective site. Further interactions of these complexes with L-tryptophan residues, and probable supplementary site(s) for the binding, were followed by fluorescence measurements. Analogous experiments with the free L and L′ indicated much weaker interactions. Protein oxidation damage was observed for both complexes, monitored by carbonyl groups formation in the presence of H₂O₂, probably with the participation of reactive oxygen species. Density functional theory calculations exhibit metal-ligand binding interaction energies similar to [Cu(HSA-N_terminal)]⁺, and reinforced the experimental results, showing clearly that such triazole ligands are competitive toward copper(II) in biological medium.     

DFT studies on coordination models for adsorption essays of Cu(II) and Ni(II) solutions in modified silica gel with iminodiacetic groups

Research in functionalized inorganic supports faces special challenges regarding the inmobilization of organic chains and efficient computational methods for the quantum chemical modeling of coordination compounds. The silylant 3-cloropropyltriethoxysilyl (R1) was anchored over silica gel in anhydrous conditions, in order to react with diethyl Iminodiacetate (DIDA) to obtain modified silica gel (R2), which was hydrolized in basic conditions previously synthesized and characterized by S _BET, TGA and FTIR spectroscopy to obtain iminodiacetic acid groups IDA to prepare an modified inorganic support (R3) that is able to get hands on metals from the first transition series such as copper and nickel. The obtained experimental values showed that the functionalized grade of R3 corresponds to 0.1598 mmol of the nitrogen indicated that the adsorbed Cu(II) or Ni(II) have the stoichiometry for both cation of 1:1. Based on this relation, the three different structures were proposed to carry out the computational studies using density functional theory (DFT) in its LDA and PW91 with the TZP slater type basis set. The primary coordination sphere of copper(II) or nickel (II) ion in R3 are optimized, structural parameters are calculated, vibrational bands are assigned and energy gaps of frontier orbital (HOMO–LUMO) have been calculated. The calculated results reproduced the experimental data with good agreement. An energy decomposition analysis (EDA) of the different models proposed here was performed and suggest a 1:1 coordination form.     

Microfluidic chip-based protein capture from human whole blood using octadecyl (C18) silica beads for nucleic acid analysis from large volume samples

We have previously described the development of a novel capillary-based photopolymerized monolith that offered unprecedented efficiency (approximately 85%) for DNA extraction from pre-purified human genomic DNA [J. Wen, C. Guillo, J.P. Ferrance, J.P. Lander, Anal. Chem. 78 (2006) 1673]. However, the major drawback associated with this phase was the limited binding capacity and low extraction efficiency (<40%) when purifying nucleic acids from a volume of whole blood greater than 0.1 microL. The limited DNA binding capacity, hypothesized to result from an overwhelming mass of protein overloading the monolith phase, severely limits the clinical utility, which will require a whole blood DNA capacity orders of magnitude larger. One proposed solution involved use of a protein capture bed to remove the majority of the protein present in blood before nucleic acid extraction was performed. To evaluate this, microchips with different channel configurations were designed and tested containing silica beads with various reversed phases, and their protein capture efficiency determined. Triton X-100 in the cell lysis buffer was found to be a critical component, greatly affecting the binding of proteins to the C18 reversed phase. An optimum Triton X-100 concentration of 0.1% was determined to enhance red and white blood cell lysis without adversely affecting protein binding to the C18 phase. A parallel 4-chamber design was found to be optimal, with 70% of the proteins (1020+/-45 microg) from a load solution containing 10 microL of whole blood captured on the C18 phase in a single microdevice. Electrophoretic analysis of the proteins in the flow-through of the C18 phase showed the absence of hemoglobin and larger proteins/peptides, indicating that they had been captured by the C18 phase, preventing these polymerase chain reaction inhibitory proteins from reaching and binding to the subsequent matrix which would be used for DNA capture.     

Highly selective preconcentration of Cu(II) from seawater and water samples using amidoamidoxime silica

Chemically modified silica containing amidoamidoxime group was studied as a sorbent for solid-phase extraction (SPE) and preconcentration of Cu(II) prior to determination by flame atomic absorption spectrometry (FAAS). The sorbent showed an extremely high selectivity towards Cu(II) in the pH range of 4-6, while the extraction of Pb(II), Cd(II), Ni(II) and Co(II) was low. The adsorption isotherm followed the Langmuir model and the maximum sorption capacity of 0.0163 mmol Cu(II) g⁻¹ was achieved. In the flow system, Cu(II) was completely retained on a column containing 40 mg of the modified silica at the flow rate of 4.0 mL min⁻¹ and quantitatively eluted by 5 mL of 1% (v/v) HNO₃. No interference from Na⁺, K⁺, Mg²⁺, Ca²⁺, Cl⁻ and SO₄²⁻ at 10, 100 and 1000 mg L⁻¹ was observed. When applied for preconcentration and determination of Cu(II) in tap water, pond water, and seawater, the recoveries were 96, 101, and 95%, respectively, with high precision (% relative standard deviation (R.S.D.) < 4) and low method detection limit (9 μg L⁻¹).     

Characterization of interaction kinetics between chiral solutes and human serum albumin by using high-performance affinity chromatography and peak profiling

Peak profiling and high-performance columns containing immobilized human serum albumin (HSA) were used to study the interaction kinetics of chiral solutes with this protein. This approach was tested using the phenytoin metabolites 5-(3-hydroxyphenyl)-5-phenylhydantoin (m-HPPH) and 5-(4-hydroxyphenyl)-5-phenylhydantoin (p-HPPH) as model analytes. HSA columns provided some resolution of the enantiomers for each phenytoin metabolite, which made it possible to simultaneously conduct kinetic studies on each chiral form. The dissociation rate constants for these interactions were determined by using both the single flow rate and multiple flow rate peak profiling methods. Corrections for non-specific interactions with the support were also considered. The final estimates obtained at pH 7.4 and 37°C for the dissociation rate constants of these interactions were 8.2-9.6 s(-1) for the two enantiomers of m-HPPH and 3.2-4.1 s(-1) for the enantiomers of p-HPPH. These rate constants agreed with previous values that have been reported for other drugs and solutes that have similar affinities and binding regions on HSA. The approach used in this report was not limited to phenytoin metabolites or HSA but could be applied to a variety of other chiral solutes and proteins. This method could also be adopted for use in the rapid screening of drug-protein interactions.     

A competitive immunoassay for ultrasensitive detection of Hg in water,human serum and urine samples using immunochromatographic test based on surface-enhanced Raman scattering

An immunochromatographic test (ICT) strip was developed for ultrasensitive competitive immunoassay of Hg²⁺. This strategy was achieved by combining the easy-operation and rapidity of ICT with the high sensitivity of surface-enhanced Raman scattering (SERS). Monoclonal antibody (mAb) against Hg²⁺ and Raman active substance 4-mercaptobenzoic acid (MBA) dual labelled gold nanoparticles (GNPs) were prepared as an immunoprobe. The Raman scattering intensity of MBA on the test line of the ICT strip was measured for quantitative determination of Hg²⁺. The ICT was able to directly detect Hg²⁺ without complexing due to the specific recognition of the mAb with Hg²⁺. The IC₅₀ and limit of detection (LOD) of the assay for Hg²⁺ detection were 0.12 ng mL⁻¹ and 0.45 pg mL⁻¹, respectively. There was no cross-reactivity (CR) of the assay with other nineteen ions and the ICT strips could be kept for 5 weeks without loss of activity. The recoveries of the assay for water, human serum and urine samples spiked with Hg²⁺ were in range of 88.3–107.3% with the relative standard deviations (RSD) of 1.5–9.5% (n = 3). The proposed ICT was used for the detection of Hg²⁺ in urine samples collected from Occupational Disease Hospital and the results were confirmed by cold-vapor atomic fluorescence spectroscopy (CV-AFS). The assay exhibited high sensitivity, selectivity, stability, precision and accuracy, demonstrating a promising method for the detection of trace amount of Hg²⁺ in environmental water samples and biological serum and urine samples.     

Synthesis and structural characterization of a novel mixed-valent Cu(II)Cu(I)Cu(II) triangular metallomacrocycle using an imine-based rigid ligand

A novel neutral mixed-valent Cu(I)Cu(II)(2) triangular metallomacrocycle [Cu(3)L(2)(HL)].3CH(3)OH.2H(2)O (1) was assembled by reaction of the tetradentate ligand bis(N-salicylidene-4,4'-diphenylamine), H(2)L, with a copper(II) salt. ESI-MS show peaks only corresponding to the triangular structural species, indicating the high stability of the trimer structure in solution. Magnetic study confirms that there are two Cu(II) ions and one Cu(I) ion in a discrete triangular molecule. The crystal structure of 1 reveals that the triangle is formed by three deprotonated ligands and three copper ions with a Cu-Cu separation of ca. 11.8 A. Each copper atom is coordinated by two oxygen atoms and two nitrogen atoms from two different bis-bidentate ligands in a heavily distorted tetrahedral geometry, while each ligand is bound to two metal ions in a bis-bidentate coordination mode and links the metal centers overlapping in an unprogressive manner. Strong intramolecular pi.pi interactions between the ligands are found to stabilize the constraint conformation of the triangle. Electrochemical study reveals that the mixed-valent Cu(I)Cu(II)(2) complex is the most stable state in solution condition, and the electrochemical communication between the copper ions might be explained on the basis of the through-bond interaction. UV-vis-NIR spectral measurement demonstrates the Robin-Day class II behavior of the mixed-valence compound with a weak copper-copper interaction.     

Removal of As(V) by Cu(II)-, Ni(II)-, or Co(II)-doped goethite samples

The present study reports removal of As(V) by adsorption onto laboratory-prepared pure and Cu(II)-, Ni(II)-, and Co(II)-doped goethite samples. The X-ray diffraction patterns showed only goethite as the crystalline phase. Doping of ions in the goethite matrix resulted in shift of d-values. Various parameters chosen for adsorption were nature of adsorbent, percentage of doped cations in goethite matrix, contact time, solution pH, and percentage of adsorbate. It was observed that the pH(pzc) of the goethite surface depended on the nature and concentration of metal ions. The surface area as well as the loading capacity increased with the increase of dopant percentage in goethite matrix. A maximum loading capacity of 19.55 mg/g was observed for 2.7% Cu(II)-doped goethite. The adsorption kinetics for Ni(II), Co(II) and for undoped goethite attained a quasi-equilibrium state after 30 min with almost negligible adsorption beyond this time. In case of Cu(II)-doped goethite samples, the quasi-equilibrium state for As(V) adsorption was observed after 60 min. At each studied pH condition, it was observed that the percentage of adsorption of As(V) decreased in the order Cu(II)-doped goethite > or = Ni(II)-doped goethite > Co(II)-doped goethite > pure goethite. The adsorption followed: Langmuir isotherm, indicating monolayer formation.     

Cu(II), Fe(III)与人血清白蛋白相互作用的荧光光谱研究

通过研究Cu(II),Fe(III)对人血清白蛋白(HSA)内源荧光的猝灭,探讨了Cu(II),Fe(III)与人血清白蛋白的结合机理。基于Forster非辐射能量转移机理。获得了人血清白蛋白第一类Cu(II)结合部位与214位色氨酸残基间的距离为1.8nm,并讨论了Cu(II),Fe(III)与HSA结合的差异。     

Stereochemical versatility of Cu(II): Cu(II) complexes of benzyl methyl ketone semicarbazone

Copper(II) complexes of the general composition Cu(ligand)₂X₂ (where X = Cl, Br, NO₃, ClO₄, and $\text{1}\text{2}$SO₄) and Cu(ligand)(CH₃COO)₂ have been synthesised with benzymethylketonesemicarbazone. All the complexes prepared have been characterised by elemental analysis, magnetic moment, conductance, IR, electronic and electron spin resonance spectral studies. The complexes Cu(ligand)₂X₂ (X = Cl, Br, NO₃) and Cu(ligand)(CH₃COO)₂ may have tetragonal symmetry while the Cu(ligand)₂X₂ (ClO₄ and $\text{1}\text{2}$SO₄) may be five-coordinate trigonal bipyramidal in structure.     

Antimony film screen-printed carbon electrode for stripping analysis of Cd(II), Pb(II), and Cu(II) in natural samples

An in-situ antimony film screen-printed carbon electrode (in-situ SbSPCE) was successfully used for the determination of Cu(II) simultaneously with Cd(II) and Pb(II) ions, by means of differential pulse anodic stripping voltammetry (DPASV), in a certified reference groundwater sample with a very high reproducibility and good trueness. This electrode is proposed as a valuable alternative to in-situ bismuth film electrodes, since no competition between the electrodeposited copper and antimony for surface sites was noticed. In-situ SbSPCE was microscopically characterized and experimental parameters such as deposition potential, accumulation time and pH were optimized. The best voltammetric response for the simultaneous determination of Cd(II), Pb(II) and Cu(II) ions was achieved when deposition potential was −1.2 V, accumulation time 120 s and pH 4.5. The detection and quantification limits at levels of μg L⁻¹ suggest that the in-situ SbSPCE could be fully suitable for the determination of Cd(II), Pb(II) and Cu(II) ions in natural samples.     

Metal ion promoted hydrogels for bovine serum albumin adsorption: Cu(II) and Co(II) chelated poly[(N-vinylimidazole)-maleic acid

Poly[(N-vinylimidazole)-maleic acid] (poly(VIm-MA)), copolymeric hydrogels were prepared by gamma-irradiating ternary mixtures of N-vinylimidazole-maleic acid-water in a (60)Co-gamma source. Cu(II) and Co(II) ions were chelated within the gels at pH=5.0. The maximum adsorption capacity of the gels were 3.71 mmol/g dry gel for Cu(II) and 1.25 mmol/g dry gel for Co(II) at pH=5.0. The swelling ratios of the gels were 1200% for poly(VIm-MA), 60 and 45% for Cu(II) and Co(II)-chelated poly(VIm-MA) gels at pH=5.0 in acetate buffer solution. These affinity gels with different swelling ratios for plain poly(VIm-MA), Cu(II)-, and Co(II)-chelated poly(VIm-MA), in acetate and phosphate buffers were used in the bovine serum albumin (BSA) adsorption/desorption studies in batch reactor. The maximum BSA adsorption capacities of the gels were 0.38 g/g dry gel for plain, 0.88 g/g dry gel for Cu(II)-chelated poly(VIm-MA) and 1.05 g/g dry gel for Co(II)-chelated poly(VIm-MA) gels. Adsorption capacity of BSA by the gels was reduced dramatically by increasing the ionic strength adjusted with NaCl. More than 95% of BSA were desorbed in 10 h in desorption medium containing 0.1M of EDTA for metal ion-chelated gels at pH=4.7.     

Temperature-triggered capture of dispersed particles using deposited Laponite with grafted poly(N-isopropylacrylamide) chains

A method has been developed that enables a conductive surface to be modified so as to capture dispersed particles when the temperature is increased; poly(N-isopropylacrylamide) was grafted from electrodeposited Laponite particles using surface-initiated atom transfer radical polymerisation and used to capture dispersed polystyrene particles.     

Fe3O4@SiO2@Bacillus pumilis: magnetised solid phase bio-extractor for preconcentration of Pb(II) and Cu(II) from water samples

ABSTRACT

In this study, preconcentration and separation of Cu(II) and Pb(II) ions by using Fe₃O₄@SiO₂@Bacillus pumilis before their determinations by flame atomic absorption spectrometry (FAAS) were investigated. The thermophilic Bacillus pumilis were isolated from Meyremderesi spring, ??rnak, Turkey. Effects of important parameters such as pH, adsorbent amount, eluent type, concentration and volume of eluent and sample volume on magnetic solid phase extraction (MSPE) were examined in details. The preconcentration factors for Cu(II) and Pb(II) ions were calculated as 30 and 40, respectively. The accuracy of the proposed extraction procedure was validated analysing certificated reference materials and addition – recovery tests. The concentration of copper and lead were determined in water samples from Turkey by Flame AAS after application developed preconcentration-separation method.     

Simultaneous determination of Hg(II) and Cu(II) in water samples using fluorescence quenching sensor of N-doped and N,K co-doped graphene quantum dots

The present study was aimed to use of N doped graphene quantum dots (N-GQDs) and N,K co-doped graphene quantum dots (N,K-GQDs) as a fluorescence quenching sensor to determine both mercury and copper in water sample, simultaneously using simple fluorescence protocol. Each of N-GQDs or N,K-GQDs was optimized separately with 1–5% (w/v) HNO₃ or KNO₃, respectively, and their quantum yields were determined and compared. It was found that N-GQDs, obtained from 3% (w/v) HNO₃ doped resulted higher fluorescence intensity at the maximum excitation and emission wavelengths of 370 and 460 nm, respectively, with higher quantum yield (QY = 83.42%) compared with that of undoped GQDs (QY = 16.35%). While N,K-GQDs obtained from 5%(w/v) KNO₃ gave somewhat different fluorescence spectrum, but still had the same maximum excitation and emission wavelengths with rather highest QY (94.07%). However, it is interesting that detection sensitivity expressed as slope of their calibration curve (y = 5.43x − 19.48; r² = 0.9971) of the N-GQDs is rather higher than that (y = 1.29x + 17.66; r² = 0.9977) of the N,K-GQDs for Hg²⁺ fluorescence quenching sensor, and the fluorescence intensity of N-GQDs had better selectively quenching effect only by both Hg²⁺ and Cu²⁺. Thus, their quenching effects were selected to develop the fluorescence turn-off sensor for trace level of both metal ions in real water samples. For method validation, the N-GQDs exhibited high sensitivity to detect both Hg²⁺ and Cu²⁺ with wide linear ranges of 20–100 μM and 100–500 μM, respectively. Limit of detection (LOD) and limit of quantitation (LOQ) were 0.42 μM & 1.41 μM for Hg²⁺ and 13.19 μM & 43.97 μM for Cu²⁺, respectively, with their precision expressed as an intra-day and an inter-day analysis of 6.98% & 11.35% for Hg²⁺ and 11.78% & 9.43% for Cu²⁺, respectively. Also the study of matrix analysis of the water samples (drinking water and tap water), was carried out using N-GQDs and N,K-GQDs resulted good percentage recoveries in comparison with those using undoped GQDs under the same optimum conditions.     

Kinetic studies of drug-protein interactions by using peak profiling and high-performance affinity chromatography: examination of multi-site interactions of drugs with human serum albumin columns

Carbamazepine and imipramine are drugs that have significant binding to human serum albumin (HSA), the most abundant serum protein in blood and a common transport protein for many drugs in the body. Information on the kinetics of these drug interactions with HSA would be valuable in understanding the pharmacokinetic behavior of these drugs and could provide data that might lead to the creation of improved assays for these analytes in biological samples. In this report, an approach based on peak profiling was used with high-performance affinity chromatography to measure the dissociation rate constants for carbamazepine and imipramine with HSA. This approach compared the elution profiles for each drug and a non-retained species on an HSA column and control column over a board range of flow rates. Various approaches for the corrections of non-specific binding between these drugs and the support were considered and compared in this process. Dissociation rate constants of 1.7 (±0.2) s(-1) and 0.67 (±0.04) s(-1) at pH 7.4 and 37°C were estimated by this approach for HSA in its interactions with carbamazepine and imipramine, respectively. These results gave good agreement with rate constants that have determined by other methods or for similar solute interactions with HSA. The approach described in this report for kinetic studies is not limited to these particular drugs or HSA but can also be extended to other drugs and proteins.     

Spectrophotometric microdetermination of Cu(II) and Fe(III) using 2,4-dinitrosoresorcinol

The colored complexes formed by the reaction of dinitrosoresorcinol with Cu(II) and Fe(III) is utilized for the microdetermination of both metal ions either alone or in a binary mixtures. Satisfactory results are obtained when the proper media are utilized in the presence of an excess of the organic ligand. The interference of some ions is also investigated.