Palladium-catalyzed [2 + 2 + 2] cocyclotrimerization of benzynes with bicyclic alkenes: an efficient route to anellated 9,10-dihydrophenanthrene derivatives and polyaromatic compounds

An efficient method for the cocyclotrimerization of bicyclic alkenes and benzynes catalyzed by palladium phosphine complexes to give the corresponding norbornane anellated 9,10-dihydrophenanthrene derivatives is described. Bicyclic alkenes 1a-i undergo [2 + 2 + 2] cocyclotrimerization with benzynes generated from precursors 2a-d [2-(trimethylsilyl)phenyl triflate (2a), 4,5-dimethyl-2-(trimethylsilyl)phenyl triflate (2b), 6-(trimethylsilyl)-2,3-dihydro-1H-5-indenyl triflate (2c), 4-methyl-2-(trimethylsilyl)phenyl triflate (2d)] in the presence of PdCl(2)(PPh(3))(2) in acetonitrile at ambient temperature to yield anellated 9,10-dihydrophenanthrene products 3a-r in moderate to excellent yields. The [2 + 2 + 2] cocyclotrimerization products from oxa- and azabicyclic alkenes can be applied for the synthesis of polyaromatics, substituted benzo[b]triphenylenes (8a-f), via a simple Lewis acid mediated deoxyaromatization in good yields. In addition the [2 + 2 + 2] products undergo retro Diels-Alder reaction readily, providing a new method for the synthesis of substituted phenanthrenes and for generating isobenzofurans. A plausible mechanism is proposed to account for the catalytic [2 + 2 + 2] cycloaddition reaction.     

Recent advances in "formal" ruthenium-catalyzed [2+2+2] cycloaddition reactions of diynes to alkenes

"Formal" and standard RuII-catalyzed [2+2+2] cycloaddition of 1,6-diynes to alkenes gave bicyclic 1,3-cyclohexadienes in relatively good yields. When terminal 1,6-diynes 1 were used, two isomeric bicyclic 1,3-cyclohexadienes 4 or 6 were obtained, depending on the acyclic or cyclic nature of the alkene partner. When unsymmetrical substituted 1,6-diynes 7 were used, the reaction with acyclic alkenes took place regio- and stereoselectively to afford bicyclic 1,3-cyclohexadienes 8. A cascade process that behaves as a "formal" RuII-catalyzed [2+2+2] cycloaddition explained these results. Initially, a Ru-catalyzed linear coupling of 1,6-diynes 1 and 7 with acyclic alkenes occurs to give open 1,3,5-trienes of type 3, which after a thermal disrotatory 6e(-) pi-electrocyclization led to the final 1,3-cyclohexadienes 4 and 8. When disubstituted 1,6-diyne 10 was used with electron-deficient alkenes, new exo-methylene cyclohexadienes 12 arose from a competitive reaction pathway.     

Nickel-catalyzed [3+2+2] cycloaddition of ethyl cyclopropylideneacetate and diynes. Synthesis of 7,6- and 7,5-fused bicyclic compounds

The [3+2+2] cycloaddition reaction of ethyl cyclopropylideneacetate (1) and diynes proceeded in the presence of Ni(0) catalysts, and bicyclic compounds were isolated in good yields. The reaction provided a new approach to 7,6- and 7,5-fused bicyclic compounds.     

Catalytic enantioselective [2+2]-cycloaddition reaction of 2-methoxycarbonyl-2-cyclopenten-1-one by chiral copper catalyst

A new catalytic system for enantioselective [2+2]-cycloaddition reaction of 2-methoxycarbonyl-2-cyclopenten-1-one with thioacetylene derivatives is described. The use of a catalytic amount (20-30 mol%) of copper(II) salt with chiral bis-pyridine ligand was found to be effective in promoting the [2+2]-cycloaddition reaction, furnishing the corresponding bicyclic compound in good yield and good enantioselectivity.     

Chiral bis(imidazolidine)pyridine-cu complex-catalyzed enantioselective [3+2]-cycloaddition of azomethine imines with propiolates

[3+2] Cycloaddition of azomethine imines with electron-deficient terminal alkynes was smoothly catalyzed by a chiral bis(imidazolidine)pyridine-CuOAc complex to give bicyclic pyrazolo[1,2-a]pyrazolone derivatives with up to 74% ee.     

Rhodium(I)-Catalyzed Bridged [5+2] Cycloaddition of cis-Allene-vinylcyclopropanes to Synthesize the Bicyclo[4.3.1]decane Skeleton

Previously reported was that cis-ene-vinylcyclopropanes (cis-ene-VCPs) underwent Rh-catalyzed [5+2] reaction to give 5,7-fused bicyclic products, where vinylcyclopropane (VCP) acts as five-carbon synthon. Unfortunately, this reaction had very limited scope. Replacing the 2π component of cis-ene-VCPs to allene moiety, the corresponding cis-allene-VCPs did not undergo the expected normal [5+2] cycloaddition to give 5,7-fused bicyclic products. Instead, the challenging bicyclo[4.3.1]decane skeleton was obtained via an unprecedented bridged [5+2] cycloaddition. DFT calculations were applied to understand why this bridged [5+2] reaction is favored over the anticipated but not realized normal [5+2] reaction.     

Iodine atom transfer [3 + 2] cycloaddition reaction with electron-rich alkenes using N-tosyliodoaziridine derivatives as novel azahomoallyl radical precursors

Treatment of N-tosyliodoaziridine derivatives with Et(3)B efficiently produces various azahomoallyl radical (2-akenylamidyl radical) species which give oxygen-functionalized pyrrolidine derivatives through iodine atom transfer [3 + 2] cycloaddition with electron-rich alkenes such as enol ethers and ketene acetal. The present cycloaddition reaction proceeds regioselectively via C-N bond cleavage of an aziridinylalkyl radical intermediate and addition of the resulting azahomoallyl radicals to the terminal carbon of an alkene. The reaction of alkenes with the cyclohexenylamidyl radical generated from an optically active bicyclic iodoaziridine [(1S,2S,6S)-2-iodo-7-(p-toluenesulfonyl)-7-azabicyclo[4.1.0]heptane, 94% ee] also proceeds to give optically active octahydroindole derivatives (84-93% ee).     

Formal and standard ruthenium-catalyzed [2 + 2 + 2] cycloaddition reaction of 1,6-diynes to alkenes: a mechanistic density functional study

"Formal" and standard Ru(II)-catalyzed [2 + 2 + 2] cycloaddition of 1,6-diynes 1 to alkenes gave bicyclic 1,3-cyclohexadienes in relatively good yields. The neutral Ru(II) catalyst was formed in situ by mixing equimolecular amounts of [Cp*Ru(CH3CN)3]PF6 and Et4NCl. Two isomeric bicyclic 1,3-cyclohexadienes 3 and 8 were obtained depending on the cyclic or acyclic nature of the alkene partner. Mechanistic studies on the Ru catalytic cycle revealed a clue for this difference: (a) when acyclic alkenes were used, linear coupling of 1,6-diynes with alkenes was observed giving 1,3,5-trienes 6 as the only initial reaction products, which after a thermal disrotatory 6e-pi electrocyclization led to the final 1,3-cyclohexadienes 3 as probed by NMR studies. This cascade process behaved as a formal Ru-catalyzed [2 + 2 + 2] cycloaddition. (b) With cyclic alkenes, the standard Ru-catalyzed [2 + 2 + 2] cycloaddition occurred, giving the bicyclic 1,3-cyclohexadienes 8 as reaction products. A complete catalytic cycle for the formal and standard Ru-catalyzed [2 + 2 + 2] cycloaddition of acetylene and cyclic and acyclic alkenes with the Cp*RuCl fragment has been proposed and discussed based on DFT/B3LYP calculations. The most likely mechanism for these processes would involve the formation of ruthenacycloheptadiene intermediates XXIII or XXVII depending on the alkene nature. From these complexes, two alternatives could be envisioned: (a) a reductive elimination in the case of cyclic alkenes 7 and (b) a beta-elimination followed by reductive elimination to give 1,3,5-hexatrienes 6 in the case of acyclic alkenes. Final 6e-pi electrocyclization of 6 gave 1,3-cyclohexadienes 3.     

Rhodium(I)‐Catalyzed Bridged [5+2] Cycloaddition of cis‐Allene‐vinylcyclopropanes to Synthesize the Bicyclo[4.3.1]decane Skeleton

Previously reported was that cis‐ene‐vinylcyclopropanes (cis‐ene‐VCPs) underwent Rh‐catalyzed [5+2] reaction to give 5,7‐fused bicyclic products, where vinylcyclopropane (VCP) acts as five‐carbon synthon. Unfortunately, this reaction had very limited scope. Replacing the 2π component of cis‐ene‐VCPs to allene moiety, the corresponding cis‐allene‐VCPs did not undergo the expected normal [5+2] cycloaddition to give 5,7‐fused bicyclic products. Instead, the challenging bicyclo[4.3.1]decane skeleton was obtained via an unprecedented bridged [5+2] cycloaddition. DFT calculations were applied to understand why this bridged [5+2] reaction is favored over the anticipated but not realized normal [5+2] reaction.     

Rh(I)-catalyzed intramolecular [3 + 2] cycloaddition of trans-vinylcyclopropane-enes

Vinylcyclopropane (VCP) has been well applied as a five-carbon component, rather than a three-carbon component, in transition-metal catalyzed cycloadditions. Here we demonstrate a Rh(I)-catalyzed [3 + 2] reaction of trans-VCP-enes, where VCP acts as a three-carbon synthon to furnish five-membered carbocycles. This novel cycloaddition is efficient in generating bicyclic cyclopentanes in good yields from simple and easily prepared substrates. When cis-VCP-ene is used as the substrate, VCP acts as a five-carbon unit to give a [5 + 2] cycloadduct. Rationalization of the [3 + 2] and [5 + 2] cycloadditions of VCP-enes has been proposed.     

Visible-Light-Mediated Heterocycle Functionalization via Geometrically Interrupted [2+2] Cycloaddition

The [2+2] photocycloaddition is the most valuable and intensively investigated photochemical process. Here we demonstrate that irradiation of N-acryloyl heterocycles with blue LED light (440 nm) in the presence of an Ir^III complex leads to efficient and high yielding fused γ-lactam formation across a range of substituted heterocycles. Quantum calculations show that the reaction proceeds via cyclization in the triplet excited state to yield a 1,4-diradical; intersystem crossing leads preferentially to the closed shell singlet zwitterion. This is geometrically restricted from undergoing recombination to yield a cyclobutane by the planarity of the amide substituent. A prototropic shift leads to the observed bicyclic products in what can be viewed as an interrupted [2+2] cycloaddition.     

Asymmetric Synthesis of Bicyclic Pyrazolidinones through Alkaloid-Catalyzed [3+2]-Cycloadditions of Ketenes and Azomethine Imines

A versatile asymmetric synthesis of bicyclic pyrazolidinones through alkaloid-catalyzed formal [3+2]- and [3+2+2]-cycloadditions of ketenes with azomethine imines is described. The methodology was found to be tolerant of ketene and a variety of monosubstituted ketenes (R=alkyl, OAc). The products were formed in good to excellent yields (71–99 % for 24 examples, 39 examples in all), with good to excellent diastereoselectivity in many cases (dr 3 : 1 to 27 : 1 for 22 examples), and with excellent enantioselectivity for most examples (≥93 % ee for 34 products). In the case of most disubstituted ketenes, the reaction proceeded through a [3+2+2]-cycloaddition to form structurally interesting bicyclic pyrazolo-oxadiazepinediones with moderate diastereoselectivity (dr up to 3.7 : 1) and as racemic mixtures (3 examples). The method represents the first unambiguous example of an enantioselective reaction between ketenes and a 1,3-dipole.     

Study on the reactivity of oxabicyclic alkenes in ruthenium-catalyzed [2+2] cycloadditions

The ruthenium-catalyzed [2+2] cycloadditions of various bicyclic alkenes with an alkyne have been investigated. The presence of the oxygen in the bridgehead of the bicyclic alkene significantly enhanced the rate of the ruthenium-catalyzed [2+2] cycloadditions. The presence of a C1-substituent on the oxanorbornadiene decreased the rate of the cycloaddition and electron-withdrawing C1-substituents were found to be more reactive than electron-donating C1-substituents in the Ru-catalyzed [2+2] cycloaddition. The nature of the substituent on the benzene ring of oxabenzonorbornadienes showed little effect on the rate of the cycloaddition.     

Photosensitized [4+2]- and [2+2]-Cycloaddition Reactions of N-Sulfonylimines

The synthesis of polycyclic compounds is of high interest due to the prevalence of these motifs in drugs and natural products. Herein, we report on the stereoselective construction of 3D bicyclic scaffolds and azetidine derivatives by modulation of N-sulfonylimines to achieve either [4+2]- or [2+2]-cycloaddition reactions. The utility of the method was established by further modulation of the product. Mechanistic studies are also included, which support reaction via Dexter energy transfer.     

Rh(I)-catalyzed formal [6 + 2] cycloaddition of 4-allenals with alkynes or alkenes in a tether

Rh(I)-catalyzed formal [6 + 2] cycloaddition of allenal 6 having an alkyne or alkene in a tether proceeded smoothly, giving 5-8- and 6-8-fused bicyclic ketone derivatives 7 in good to excellent yields. It was also found that cyclization of enantiomerically enriched (S)-6a (94% ee) gave cyclic ketone derivative (S)-7a in high yield with reasonable chirality transfer (86% ee). This result indicates that this cyclization proceeds through stereoselective formation of rhodacycle H' followed by insertion of a multiple bond.     

Rhodium-catalyzed enantioselective [2+2+2] cycloaddition of diynes with unfunctionalized alkenes

A chiral rhodium complex catalyzed an enantioselective [2+2+2] cycloaddition of unsymmetrical diynes with norbornene, and tetracyclic products were obtained in good to excellent ee. The cycloaddition of a symmetrical diyne with styrene derivatives as coupling partners gave bicyclic products in good ee.     

Eight-membered ring construction by [4 + 2 + 2] annulation involving beta-carbon elimination

Cyclobutanones underwent a formal [4 + 2 + 2] annulation reaction with 1,6- and 1,7-diynes in the presence of nickel(0) catalysts to provide bicyclic eight-membered ring ketones. The annulation reaction proceeds through a ring-expansion of oxanickelacycloheptadiene via beta-carbon elimination to form a nine-membered nickelacycle. This reaction employing cyclobutanones as a C4 unit constructs cyclooctadienone cores in one synthetic step.     

Synthesis of macrocycles via cobalt-mediated [2 + 2 + 2] cycloadditions

We investigated the formation of macrocycles from alpha,omega-diynes in cobalt-mediated co-cyclotrimerization reactions. Long-chain alpha,omega-diynes underwent metal-mediated [2 + 2 + 2] cycloadditions with nitriles, cyanamides, or isocyanates in the presence of CpCo(CO)2 (Cp = cyclopentadienide) to yield pyridine-containing macrocycles, i.e., meta- and para-pyridinophanes, such as 5m/5p, 35m/35p, and 41m/41p. The regioselectivity of these reactions was affected by the length and type of linker unit between the alkyne groups, as well as by certain stereoelectronic factors. An analogous alpha,omega-cyano-alkyne, 28, combined with an alkyne to yield two isomeric meta-pyridinophanes, such as 5m and 29m, and an ortho cycloadduct (benzannulation product), such as 29o. We developed a reaction protocol for these cobalt-based [2 + 2 + 2] cycloadditions that involves markedly improved conditions such that this process offers a convenient, flexible synthetic approach to macrocyclic pyridine-containing compounds. For example, diyne 6 reacted with p-tolunitrile in 1,4-dioxane to give 7p and 7m (7:1 ratio) in 87% yield at a moderate temperature of ca. 100 degrees C in 24 h without photoirradiation or syringe-pump addition. Isocyanates were also effective reactants, as exemplified by the formation of 44p almost exclusively (44p:44m > 50:1) in 64% yield from diyne 8 and 2-phenylethylisocyanate. By using this improved protocol we were able to co-cyclotrimerize long-chain alpha,omega-diynes with alkynes in certain cases to demonstrate a successful macrocyclic variant of the Vollhardt reaction. For instance, diyne 6 reacted with dipropylacetylene to give paracyclophane 57p and benzannulene 57o (2:1 ratio) in 29% yield.     

Rhodium N-heterocyclic carbene-catalyzed [4 + 2] and [5 + 2] cycloaddition reactions

[reactions: see text] A rhodium complex of N-heterocyclic carbene (NHC) has been developed for intra- and intermolecular [4 + 2] and intramolecular [5 + 2] cycloaddition reactions. This is the first use of a transition-metal NHC complex in a Diels-Alder-type reaction. For the intramolecular [4 + 2] cycloaddition reactions, all the dienynes studied were converted to their corresponding cycloadducts in 91-99% yields within 10 min. Moreover, up to 1900 turnovers have been obtained for the intramolecular [4 + 2] cycloaddition at 15-20 degrees C. For the intermolecular [4 + 2] cycloadditions, high yields (71-99%) of the corresponding cycloaddition products were obtained. The reaction time and yield were highly dependent upon the diene and the dienophile. For the intramolecular [5 + 2] cycloaddition reactions, all the alkyne vinylcyclopropanes studied were converted to their corresponding cycloadducts in 91-98% yields within 10 min. However, the catalytic system was not effective for an intermolecular [5 + 2] cycloaddition reaction.     

Additionsreaktionen der nitrosogruppe—XV : [2+4]- Und [2+6]-cycloaddukte von nitrosobenzolen mit cyclischen dienen und trienen

1,3-cyclooctadiene, 1,3,6-cyclooctatriene and bicyclo-[4.2.0]-2,4-octadiene give normal Diels-Alder-adducts with nitrosobenzenes. In the reaction of 1,3,5-cyclooctatriene with nitro-substituted nitrosobenzenes, too, [2+4]-cycloadducts are formed which, however, rearrange by heating in solution to [2+6]-cycloadducts. These isomers are the only products isolated in the addition of nitrosobenzene and its p-chloro derivative to the triene.