Density Modulation Experiments on HT-7 Tokamak

Density modulation experiments are successfully conducted on HT-7 ohmic discharge to investigate particle transport coefficients: diffusion coefficients D and convection velocity V. The particle transport is studied at low (1.5×10¹⁹m^-3) and high (3×10¹⁹ m^-3) density regimes. The clear differences are observed that D is 0.42m²/s and 0.17m²/s, V is 4.7m/s (outward) and 1.6 m/s (inward) for low and high density plasmas respectively, where spatially constant D and V(r) = (r/a)V₀ were assumed for the analysis.     

Growth and optical properties of paraelectric K<Subscript>1-y</Subscript>Na<Subscript>y</Subscript>Ta<Subscript>1-x</Subscript>Nb<Subscript>x</Subscript>O<Subscript>3</Subscript> single crystals

We report the successful growth of an electroholographic crystal, potassium sodium tantalate niobate (KNTN), by a top-seeded solution growth method. Both blue and colorless crystals were obtained. The structure, optical absorption, and refractive dispersion properties of the as-grown crystals have been investigated. Furthermore, the Kerr coefficients R₁₁ and R₁₂ of paraelectric K_0.95Na_0.05Ta_0.61Nb_0.39O₃ single crystal were determined by using an automated scanning Mach–Zehnder interferometer. The crystal has large Kerr coefficients with R₁₁= 2.8×10^-16 m²/V² and R₁₂= -0.3×10^-16 m²/V² at the wavelength of 632.8 nm near its cubic–tetragonal phase boundary. PACS 81.10.Dn; 42.70.Nq     

Capacitance spectroscopic study of the Si/HF-electrolyte interface

Thep-Si/HF-electrolyte interface was characterized by capacitance–voltage (C–V) and current–voltage (I–V) studies. At low frequency, the measured capacitance exhibits two maxima: one in the weak accumulation regime (around 0.8 V [SCE]) and the other in the strong accumulation regime (around 2.6 V [SCE]), both of which disappear at high frequency. The disappearance of the two capacitance maxima is attributed to the slow response of interface traps to high frequencies. The flat-band potential, V_FB, is found to be frequency dependent. The surface state densities corresponding to the two capacitance maxima are estimated to be 3.2×10¹¹ cm^-2 and 2.4×10¹¹ cm^-2, respectively. The in situ I–V characteristics distinguish pore formation, transition and electropolishing regions. Porous Si synthesized at 50 mA cm^-2 gives a broad photoluminescence peak around 2.04 eV at 300 K. Received: 4 September 2000 / Accepted: 9 February 2001 / Published online: 26 April 2001     

Electrooptic properties of lithium niobate crystals for extremely high external electric fields

The electrooptic effect in lithium niobate crystals (LiNbO₃) for extremely high externally applied electric fields of up to 65 kV/mm is investigated. Homogeneous electrooptic refractive-index changes of up to 4.8×10^-3 are found for ordinarily polarized light. No quadratic electrooptic effect is observed. An upper bound for the quadratic electrooptic coefficient of |s₁₃|≤2.3×10^-21 m²/V² is determined. Electrooptic, angular, and wavelength tuning of the Bragg condition of a thermally fixed hologram are demonstrated. Received: 29 October 2002 / Revised version: 14 January 2003 / Published online: 26 March 2003 RID="*" ID="*"Corresponding author. E-mail: ml@uni-bonn.de     

Grain boundary diffusion of Cu in TiN film by X-ray photoelectron spectroscopy

In this study, the grain boundary diffusion of Cu through a TiN layer with columnar structure was investigated by X-ray photoelectron spectroscopy (XPS). It was observed that Cu atoms diffuse from the Cu layer to the surface along the grain boundaries in the TiN layer at elevated temperature. In order to estimate the grain boundary diffusion constants, we used the surface accumulation method. The diffusivity of Cu through TiN layer with columnar structure from 400 °C to 650 °C is D_b≈6×10⁻¹¹exp(−0.29/(k_BT )) cm²/s. Received: 18 May 1999 / Accepted: 8 September 1999 / Published online: 23 February 2000     

Cavity-ring-down spectroscopic studies of NO2 in the region around 613 nm

Catalytic degradation and diffusion processes of NO₂ were followed by cavity-ring-down spectroscopy (CRDS) at 612.9 nm. The suitability of this absorption method for quasi-continuous, direct quantitative measurements over extended periods of time is demonstrated. The high sensitivity of the method is reflected by the fact that NO₂ concentrations as low as 200 ppb were detected at wavelengths at which the absorption of NO₂ is 12-fold lower than at the absorption maximum at 413 nm. Absorption coefficients of less than 1×10^-7 cm^-1 were measured. Received: 25 February 2000 / Revised version: 4 August 2000 / Published online: 5 October 2000     

Potential-induced sonoelectrochemical graphene nanosheets with vacancies as hydrogen peroxide reduction catalysts and sensors

Defective graphene nanosheets (dGN_4V) with 5-9, 5-8-5, and point defects were synthesised by a sonoelectrochemical method, where a potential of 4 V (vs. Ag/AgCl) was applied to drive the rapid intercalation of phosphate ions between the layers of the graphite foil as a working electrode. In addition to these vacancies, double vacancy defects were also created when the applied potential was increased to 8 V (dGN_8V). The defect density of dGN_8V (2406 μm⁻²) was higher than that of dGN_4V (1786 μm⁻²). Additionally, dGN_8V and dGN_4V were applied as catalysts for the hydrogen peroxide reduction reaction (HPRR). The mass activity of dGN_8V (1.31 × 10⁻² mA·μg⁻¹) was greater than that of dGN_4V (1.17 × 10⁻² mA·μg⁻¹) because of its high electrochemical surface area (ECSA, 1250.89 m²·g⁻¹) and defect density (N_D, 2406 μm⁻²), leading to low charge transfer resistance on the electrocatalytic interface. The ECSA and N_D of dGN_4V were 502.7 m²·g⁻¹ and 1786 μm⁻², respectively. Apart from its remarkable HPRR activity, the cost-effective dGN_8V catalyst also showed potential as an amperometric sensor for the determination of H₂O₂.     

2.0-MeV Er+ implanted in silicon: depth distribution, damage profile and annealing behaviour

Si crystals were implanted with 2.0- MeV Er⁺ at the doses of 5×10¹² ions/cm², 1×10¹⁴ ions/cm², 5×10¹⁴ions/cm², 1×10¹⁵ ions/cm² and 2.5×10¹⁵ ions/cm². Conventional furnace thermal annealing was carried out in the temperature range from 600 °C to 1150 °C. The depth distribution of Er, associated damage profiles and annealing behavioar were investigated using the Rutherford backscattering spectrometry and channelling (RBS/C) technique. A proper convolution program was used to extract the distribution of Er from the experimental RBS spectrum. The obtained distribution parameters, projected range R_p, projected range straggling ΔR_p and skewness SK were compared with those of TRIM96 calculation.The experimental R_p and SK values agree well with the simulated values, while the experimental ΔR_p is larger than TRIM 96 simulated value by a factor of 18%. The damage profile of silicon crystal induced by 2.0-MeV Er⁺ at a dose of 1×10¹⁴ ions/cm² was extracted using the multiple-scattering dechannelling model based on Feldman’s method, which is in a good agreement with the TRIM96 calculation. For the samples with dose of 5×10¹⁴ ions/cm² and more, an abnormal annealing behavioar was found and a qualitative explaination has been given. Received: 11 October 1999 / Accepted: 28 March 2000 / Published online: 5 July 2000     

Diffusion of sodium,potassium, calcium,manganese, and radon in tuff and clinoptilolite under leaching

Nuclear physics methods are used to determine the diffusion coefficients of Na, Ca, Mn, K, and ²²²Rn in clinoptilolite (Sokirnitsa occurrence, Ukraine) and in natural tuff (Yucca Mountain, Nevada, United States) and in tuff irradiated by γ-quanta (E _max = 23 MeV) to a dose of 10⁷ Gy at a leaching temperature of 37°C. The diffusion coefficients of sodium and potassium in clinoptilolite are found to differ considerably: 4 × 10⁻¹⁷ and 2 × 10⁻²⁰ m²/s, respectively. This indicates the influence of aquacomplexes on the cation transfer. The diffusion coefficient of radon in these materials is determined: in clinoptilolite it equals 2.5 × 10⁻¹² m²/s.     

Kerr effect of molecular oxygen at λ=1064 nm

We report a new measurement of the Kerr effect of molecular oxygen at λ= 1064 nm. The experimental value reported for the anisotropy of the index of refraction Δ n_u^l, (3.15±0.85)×10^-25 m² V^-2 atm^-1, is in good agreement with the value of 3.4×10^-25 m² V^-2 atm^-1 obtained via an ab initio calculation. We show that the dependence of the effect on the pressure is not linear because of the presence of a collision-induced absorption band around 1060 nm due to the transition from the X³ Σ^-_g ground state to the ¹Δ_g state. We also give the value of the quadratic anisotropy Δn_u^q (-1.03±0.68)×10^-25 m² V^-2 atm^-2. We finally compare our ab initio theoretical and experimental results with previous existing data.     

Analysis of the effect of interatomic interaction energy in V-Fe alloys with different iron concentrations on segregation and swelling processes after ion irradiation

Comparative analysis of iron segregation profiles near the free surfaces of V-(2, 5, 7) at % Fe alloys irradiated with 50-keV V⁺ ions at temperatures 30–40°C with doses from 1 × 10¹⁹ to 1 × 10²¹ ions/m² has been performed. Data on the change in the moduli of normal elasticity and the values of swelling of these alloys with a change in Fe concentration in them are reported. A correlation between the character of the concentration dependence of the degree of Fe segregation, partial diffusion coefficients of the alloy components, the Young moduli, and the preference factors for vacancies and interstitials between dislocations and voids in these alloys is established.     

The critical laser intensity of self-guided light filaments in air

The critical intensity inside plasma filaments generated in air by high-power, ultra-short laser pulses is estimated analytically and compared to recent experimental data. The result, I_crit≈4×10¹³ W/cm², is highly relevant for atmospheric applications. Received 18 August 2000 / Published online: 8 November 2000     

Mobility and conductivity of ionic and bonded defects in hydrogen-bonded chains with nonlinear interactions

The proton conductivity and the mobility arising from motions of the ionic and bonded defects, in hydrogen-bonded molecular systems are investigated by means of the quantum mechanical method. Our two component model goes beyond the usual classical harmonic interaction by inclusion of a quartic interaction potential between the nearest-neighbor protons. Among the rich variety of soliton patterns obtained in this model, we focus our attention to compact kink (kinkon) solutions to calculate analytically, the mobility of the kinkon-antikinkon pair and the specific electrical-conductivity of the protons transfer in the hydrogen-bonded systems under an externally applied electrical-field through the dynamic equation of the kinkon-antikinkon pair. For ice, the mobility and the electrical conductivity of the proton transfer obtained are about 5.307×10^-7 m²  V^-1  s^-1 and 6.11×10^-4 Ω^-1 m^-1, respectively. The results obtained are in qualitative agreement with experimental data.     

Conduction transients in single-crystal octadecane

Charge transients were measured in high-quality single-crystal octadecane after electron beam irradiation. The signals produced were of significantly greater duration than the ionization pulse but were not interpretable by conventional uniform field time-of-flight analysis. By assuming that the specimens contained a strong inbuilt polarization field, it was possible to predict the properties of the observed charge transients and obtain values for the positive and negative drift mobilities. The results indicated a positive species with a mobility of 0.7 × 10^?4 m² V^?1 s^?1 and a negative carrier value of 1.6 × 10^?4 m² V^?1 s^?1. The standard deviations observed in the data were large, being 0.3 × 10^?4 m² V^?1 s^?1 and 0.8 × 10^?4 m² V^?1 s^?1, respectively. This scatter was significantly in excess of the estimated experimental error.     

Collective behavior of laser-produced plasma from a multicomponent YBa2Cu3O7 target in air

2 Cu₃O₇, using a Q-switched Nd:YAG laser is investigated by time-resolved emission-spectroscopic techniques at various laser irradiances. It is observed that beyond a laser irradiance of 2.6×10¹¹ W cm^-2, the ejected plume collectively drifts away from the target with a sharp increase in velocity to 1.25×10⁶ cm s^-1, which is twice its velocity observed at lower laser irradiances. This sudden drift apparently occurs as a result of the formation of a charged double layer at the external plume boundary. This diffusion is collective, that is, the electrons and ions inside the plume diffuse together simultaneously and hence it is similar to the ambipolar diffusion of charged particles in a discharge plasma. Received: 30 January 1998/Revised version: 12 June 1998     

Plasma-based nitrogen tail pulse shutter for CO2-TEA lidar dial systems

This paper presents the construction, use and characterisation of a laser-induced sealed plasma shutter to clip off the nitrogen pulse tail of a CO₂-TEA laser-based lidar dial system. Investigation of the optimum gas filling pressure, temporal profile of the clipped pulse, and the laser threshold power intensities to achieve ionisation growth and breakdown in helium, argon, and nitrogen are also presented. Values of these power density thresholds lie between 3×10¹¹ W cm^-2–5×10¹² W cm^-2, 2×10¹¹ W cm^-2–2×10¹² W cm^-2 and 3×10¹³ W cm^-2–2×10¹⁴ W cm^-2 for helium, argon, and nitrogen, respectively. The range resolution attainable with the present clipped pulses is 15 m, which is 30 times better than that readily obtained with the nitrogen-tailed pulses. Field measurements of the lidar returns with the clipped pulse from a co-operative target are presented. Received: 27 December 1999 / Revised version: 11 February 2000 / Published online: 27 April 2000     

A novel inverse numerical modeling method for the estimation of water and salt mass transfer coefficients during ultrasonic assisted-osmotic dehydration of cucumber cubes

The objective of this paper was to study the moisture and salt diffusivity during ultrasonic assisted-osmotic dehydration of cucumbers. Experimental measurements of moisture and salt concentration versus time were carried out and an inverse numerical method was performed by coupling a CFD package (OpenFOAM) with a parameter estimation software (DAKOTA) to determine mass transfer coefficients. A good agreement between experimental and numerical results was observed. Mass transfer coefficients were from 3.5 × 10⁻⁹ to 7 × 10⁻⁹ m/s for water and from 4.8 × 10⁻⁹ m/s to 7.4 × 10⁻⁹ m/s for salt at different conditions (diffusion coefficients of around 3.5 × 10⁻¹²–11.5 × 10⁻¹² m²/s for water and 5 × 10⁻¹² m/s–12 × 10⁻¹² m²/s for salt). Ultrasound irradiation could increase the mass transfer coefficient. The values obtained by this method were closer to the actual data. The inverse simulation method can be an accurate technique to study the mass transfer phenomena during food processing.     

Linear and nonlinear optical properties of rare earth doped of Ba0.7Sr0.3TiO3 thin films

Ba_0.7Sr_0.3TiO₃:Eu ferroelectric films were deposited on quartz substrates by pulsed laser deposition. The linear absorption coefficient and the linear refractive index calculated from the transmission spectrum at 532 nm were found to be 1.67×10⁴ cm^?1 and 1.82 respectively. The room temperature photoluminescence shows the characteristic emission of Eu³⁺ ions. The nonlinear optical properties of the film were investigated by a single beam Z-scan setup. The negative nonlinear refractive index and two photon absorption coefficient was found to be ?1.508×10^?6 m²/GW and 240 m/GW respectively. The real and imaginary part of the third order susceptibility of the thin films is 2.58×10^?17 m²/V² and 1.16×10^?16 m²/V² respectively. The BST:Eu thin films show good optical limiting property.     

First Z-scan n2 measurements on crystal hosts for ultraviolet laser systems

We report the results of the first measurements of the non-linear Kerr refractive index, n₂, for LiBaF₃ and LiLuF₄ crystal hosts, known as prospective UV-emitting tunable laser media when doped with Ce³⁺ ions. These n₂ values (2.7×10^-16 and 1.5×10^-16 cm²/W at 532 nm, respectively), obtained using the well-established Z-scan technique, are important for the characterization of new optical materials particularly in relation to their potential ultrafast applications. Received: 6 June 2000 / Published online: 5 October 2000     

High Fe2+/3+ trap concentration in heavily compensated implanted InP

High Fe concentrations (up to 2×10¹⁹ cm^-3) have been implanted in n-doped InP to compensate the substrate donors. The resulting semi-insulating layers have been investigated by current–voltage (I-V) measurements and photo-induced current transient spectroscopy (PICTS) analyses to characterise the Fe activation process and to study the Fe related deep levels. The activation of the Fe^2+/3+ trap has been assessed by the identification of the deep level located at E_C-0.64 eV. The outcomes of the PICTS measurements have been correlated with the electrically active Fe concentration calculated from a numerical simulation of the I-V characteristics. We observe an increasing linear relation between the electrically active Fe concentration and the substrate doping density, with a maximum active Fe concentration as high as 2×10¹⁸ cm^-3, i.e. more than an order of magnitude above the equilibrium Fe solid solubility. These data are presented and their implications discussed. Received: 4 September 2000 / Accepted: 7 February 2001 / Published online: 23 May 2001