Arylene ethynylene macrocycles prepared by precipitation-driven alkyne metathesis

A convenient, multigram-scale synthesis of arylene ethynylene macrocycles near room temperature is described. Driven by the precipitation of a diarylacetylene byproduct, alkyne metathesis produces the desired macrocycles in one step from monomers in high yields.     

Reaction pathways leading to arylene ethynylene macrocycles via alkyne metathesis

Mechanistic studies on the direct formation of arylene ethynylene macrocycles via alkyne metathesis catalyzed by a molybdenum complex are reported. Gel permeation chromatography (GPC) and matrix-assisted laser desorption ionization (MALDI) mass spectrometry on the products from metathesis of monomer 1 show the initial formation of linear oligomers and large macrocycles (n > 6), followed by their transformation into the thermodynamically most stable product distribution-mainly the cyclic hexamer. Variable temperature and scrambling experiments reveal the reversibility of macrocycle formation. Nearly identical product distributions are observed from the cross metathesis of hexacycle 2 with diphenylacetylene and from the metathesis of bis(phenylethynyl) substituted monomer 4, demonstrating that macrocycle formation is thermodynamically rather than kinetically controlled. The metathesis byproduct, 3-hexyne, is shown to inhibit the catalyst. It is suggested that the relative metathesis rates of dialkylalkynes versus diarylalkynes trap the catalyst in a nonproductive manifold, rendering it unavailable for the productive metathesis of aryl alkylalkyne substrates. This finding indicates that dialkyl-substituted alkyne byproducts should be avoided (or efficiently removed) if the metatheses of aryl substrates, especially those with electron-withdrawing groups, are to proceed to high conversion.     

Expedient synthesis of conjugated triynes via alkyne metathesis

The first synthesis of conjugated triynes by molybdenum-catalysed alkyne metathesis is reported. Strategic to the success of this approach is the utilization of sterically-hindered diynes that allowed for the site-selective alkyne metathesis to produce the desired conjugated triyne products. The steric hindrance of the alkyne moiety was found to be crucial in preventing the formation of diyne byproducts. This novel synthetic strategy was amenable to self- and cross-metathesis providing straightforward access to the corresponding symmetrical and dissymmetrical triynes with high selectivity.

The first synthesis of symmetrical and dissymmetrical conjugated triynes by self- and cross-metathesis was successfully achieved thanks to the use of hindered diynes.     

Ring-closing alkyne metathesis mediated synthesis of cyclic β-turn mimetics

The application of ring-closing alkyne metathesis to synthesise conformationally restricted peptidic β-turn mimics has been investigated. A range of oligopeptides containing either two acetylenic amino acids, or two cysteine residues have been synthesised and subjected to suitable cyclisation conditions. The structures of the cyclic compounds are investigated by 2D NMR analysis.     

Fullerene-templated synthesis of a cyclic porphyrin trimer using olefin metathesis

An olefination approach to the construction of covalently linked cyclic metalloporphyrin trimers is presented using fullerenes such as C(60) or C(70) as a template. Yields of the trimer approach 60%. In the absence of a template, the major product is the cyclic dimer (50% yield) with only a small amount of trimer (<10%) formed, indicating this is a template-directed approach.     

A highly C70 selective shape-persistent rectangular prism constructed through one-step alkyne metathesis

Dynamic covalent chemistry (DCC) provides an intriguing and highly efficient approach for building molecules that are usually thermodynamically favored. However, the DCC methods that are efficient enough to construct large, complex molecules, particularly those with three-dimensional (3-D) architectures, are still very limited. Here, for the first time, we have successfully utilized alkyne metathesis, a highly efficient DCC approach, to construct the novel 3-D rectangular prismatic molecular cage COP-5 in one step from a readily accessible porphyrin-based precursor. COP-5 consists of rigid, aromatic porphyrin and carbazole moieties as well as linear ethynylene linkers, rendering its shape-persistent nature. Interestingly, COP-5 serves as an excellent receptor for fullerenes. It forms 1:1 complexes with C(60) and C(70) with association constants of 1.4 × 10(5) M(-1) (C(60)) and 1.5 × 10(8) M(-1) (C(70)) in toluene. This represents one of the highest binding affinities reported so far for purely organic fullerene receptors. COP-5 shows an unprecedented high selectivity in binding C(70) over C(60) (K(C70)/K(C60) > 1000). Moreover, the binding between the cage and fullerene is fully reversible under the acid-base stimuli, thus allowing successful separation of C(70) from a C(60)-enriched fullerene mixture (C(60)/C(70), 10/1 mol/mol) through the "selective complexation-decomplexation" strategy.     

New high-yield,one-step synthesis of polyglycolide from haloacetic acids

In a new, one-step synthesis, polyglycolide was prepared by the reaction of bromo- or chloroacetic acid with triethylamine in a nitromethane solution. It was discolored, by iodoacetic acid possibly as a result of iodine formed by the decomposition of triethylammonium iodide. The structure of polyglycolide was characterized by hydrolysis, ¹H-NMR and IR spectra, and x-ray powder diffraction, which indicated partial crystallinity. A mechanism is proposed for the formation of polyglycolide. A lower limiting value of the number-average molecular weight of 10⁴ was determined by cryoscopy in 1,3-dinitrobenzene for polyglycolide prepared from bromoacetic acid; the measurement was inaccurate because of the low solubility of the polymer. No significant effect of solvent (acetone, ether, or chloroform) on yield or melting point was observed; a higher yield was obtained in nitromethane. The polymer obtained with tri-n-propylamine and bromoacetic acid had properties similar to that obtained with triethylamine. No polymer was obtained with N,N-dimethylaniline and bromoacetic acid or with triethylamine and bromoacetic acid in aqueous solution.     

Asymmetric synthesis of cyclic β-hydroxyallylsilanes via sequential allyltitanation-ring closing metathesis

Highly enantioenriched cyclic β-hydroxyallylsilanes have been prepared via enantioselective allylation of unsaturated aldehydes using a chiral allyltitanium reagent, followed by a ring-closing metathesis. Functionalized rings of various sizes have been synthesized and the electronic effect of the silicon group in the RCM reaction has been studied. The resulting cyclic β-hydroxyallylsilanes reacted stereoselectively with a variety of electrophilic reagents. A first application of this method to the synthesis of a highly functionalized dihydropyrane is reported.     

Carbon networks based on benzocyclynes. 6. synthesis of graphyne substructures via directed alkyne metathesis

Intramolecular ring closing alkyne metathesis afforded the graphyne biscyclyne (3) in high macrocyclization yield and good overall yield. This methodology also furnished the tris[12]cyclyne 4, which contains the longest linear diphenylacetylene conjugation pathway for any graphyne substructure based on the tribenzo[12]cyclyne core.     

Total synthesis of (−)-nakadomarin A: alkyne ring-closing metathesis

A 13-step, highly stereoselective synthesis of (−)-nakadomarin A has been achieved using the combination of a bifunctional organocatalyst controlled Michael addition, a nitro-Mannich/lactamization cascade, an alkyne ring-closing metathesis/syn-reduction, and furan/iminium ion cyclization/reduction as key steps.     

Optimized synthesis, structural investigations, ligand tuning and synthetic evaluation of silyloxy-based alkyne metathesis catalysts

Nitride- and alkylidyne complexes of molybdenum endowed with triarylsilanolate ligands are excellent (pre)catalysts for alkyne-metathesis reactions of all sorts, since they combine high activity with an outstanding tolerance toward polar and/or sensitive functional groups. Structural and reactivity data suggest that this promising application profile results from a favorable match between the characteristics of the high-valent molybdenum center and the electronic and steric features of the chosen Ar(3) SiO groups. This interplay ensures a well-balanced level of Lewis acidity at the central atom, which is critical for high activity. Moreover, the bulky silanolates, while disfavoring bimolecular decomposition of the operative alkylidyne unit, do not obstruct substrate binding. In addition, Ar(3) SiO groups have the advantage that they are more stable within the coordination sphere of a high-valent molybdenum center than tert-alkoxides, which commonly served as ancillary ligands in previous generations of alkyne metathesis catalysts. From a practical point of view it is important to note that complexes of the general type [(Ar(3) SiO)(3) Mo?X] (X = N, CR; R = aryl, alkyl, Ar = aryl) can be rendered air-stable with the aid of 1,10-phenanthroline, 2,2'-bipyridine or derivatives thereof. Although the resulting adducts are themselves catalytically inert, treatment with Lewis acidic additives such as ZnCl(2) or MnCl(2) removes the stabilizing N-donor ligand and gently releases the catalytically active template into the solution. This procedure gives excellent results in alkyne metathesis starting from air-stable and hence user-friendly precursor complexes. The thermal and hydrolytic stability of representative molybdenum alkylidyne and -nitride complexes of this series was investigated and the structure of several decomposition products elucidated.     

A convenient approach to cyclic enol phosphates via ring-closing metathesis

A strategy employing the second generation Grubbs catalyst in order to facilitate the generation of a variety of cyclic enol phosphates, including 2H-chromen-4-yl, 1,2-dihydroquinolin-4-yl, 2H-thiochromen-4-yl, 2H-thiochromen-4-yl 1,1-dioxide, and benzofuran-2-yl enol phosphate scaffolds is described. This work represents the first case of an olefin metathesis reaction in which one of the groups participating in the metathesis event is an enol phosphate moiety.     

Ring-closing alkyne metathesis. Application to the total synthesis of sophorolipid lactone

The first total synthesis of a major component of the microbial biosurfactant sophorolipid has been achieved. This approach to the 26-membered macrolide 1 containing a Z-configured alkene group in its lipidic tether spanning the sophorose backbone is based on a ring-closing metathesis reaction of diyne 21 catalyzed by Mo[N(t-Bu)(Ar)](3) (5; Ar = 3,5-dimethylphenyl) activated in situ by CH(2)Cl(2), followed by Lindlar reduction of the resulting cycloalkyne 22. The two beta-glycosidic linkages of compound 21 were installed by means of the glucal epoxide method and a modified Koenigs-Knorr reaction promoted by AgOTf/lutidine, respectively.     

Synthesis of cyclic proline-containing peptides via ring-closing metathesis

[reaction: see text] Several dienes embedded in di- and tripeptides which incorporate proline have been prepared and subjected to ring-closing metathesis. Bicyclic peptides of well-defined amide geometry and of varying ring sizes were prepared. Several limitations of the cyclization step were revealed.     

An InBr3 catalyzed one-pot three-component synthesis of functionalized spirodihydrofuran oxindoles via intramolecular alkyne carbonyl metathesis

A new and convenient one-pot methodology for the reaction of N-methyl isatin, alkynes and phenacyl bromides to selectively afford spiro dihydrofuran oxindole derivatives catalyzed by indium bromide under ambient temperature conditions has been documented. The method has been applied for the synthesis of a range of compounds with variable functionalities in good to excellent yields (76–92%). The significant advantages of this protocol are highlighted by excellent yields, cleaner reaction profiles and avoidance of expensive catalysts.     

Efficient one-step synthesis of chiral bidentate oxazoline-alcohol ligands via a cyclic imidate ester rearrangement

Various chiral bidentate oxazoline-alcohol ligands were obtained in a straightforward one-step synthesis via a cyclic imidate ester rearrangement. These chiral ligands were tested and compared in asymmetric diethylzinc additions to aldehydes resulting in selectivities of up to 87% ee. An interesting chirality switch was observed when a CPh₂-tether instead of a CH₂ was present, offering the opportunity for dual stereocontrol.