The temperature dependence of the exchange enthalpy of calcium and sodium ions on polymethacrylic and polyacrylic cationites

The influence of temperature on the exchange of calcium and sodium ions from solutions of 2.3–2.8 g-equiv/l concentrations on KB-2e4 gel polyacrylic cationite, KB-4P2 and KB-4 gel polymethacrylic cationites, and Purolite C104 polyacrylic cationite was studied over the temperature range 273–400 K. It was shown that, simultaneously with a substantial increase in selectivity with respect to calcium ions, the differential enthalpy of the ion exchange reaction increased linearly on all polyacrylic and polymethacrylic cationites as the temperature grew.     

Dual-temperature reagentless concentration of solutions of electrolytes based on the influence of temperature on the sorption of water by ionites

A new method of dual-temperature concentration and purification of pure and mixed solutions of calcium, magnesium, and sodium chlorides without solvent vaporization and the use of auxiliary reagents was studied. The method was based on the influence of temperature on the swelling of polymethacrylic and polyacrylic ionites. It was continuous solution passage through a column with a cationite with periodic temperature changes. A substantial increase in the concentration of solutions occurred at the “cold” stage of the process, and a decrease in concentration was observed at the “hot” stage.     

Changes in thermodynamic functions in the two-temperature process of concentration and purification of electrolyte solutions on KB-4P2 polymethacrylic ionite

Temperature dependences of the differential Gibbs energies and sorption enthalpies of water on KB-4P2 polymethacrylic ionite in Ca²⁺, Mg²⁺, Ni²⁺, and Na⁺ forms are determined. It is shown that during the two-temperature concentration and purification of electrolyte solutions, the content of the so-called “free” water in the ionite, the absorption of which by the latter is characterized by very low differential values of the Gibbs energy and enthalpy, changes with a change in the temperature of the polymethacrylic cationite suspension and electrolyte solution. It is established that the rather energy-consuming step of heating the phase of ionite and solution contributes mainly to the enthalpy of this process. Equations for the temperature dependences of the activity of water for solutions of sodium, magnesium, calcium, and nickel chlorides of various concentrations are given.     

A microcalorimetric study of the sorption of copper(II) on KB-4 carboxyl cationite

The thermokinetics of sorption of copper(II) ions on KB-4 carboxyl cationite in the salt and hydrogen forms was studied microcalorimetrically. The total heat effect of sorption and its dependence on the degree of ionite filling were determined.     

Simultaneous purification of sewage from Cd(II) and nonionic surfactant with cation exchanger

The sorption of nonionic surfactant (alkylmonoethers ALM-10), taking place simultaneously with the sorption of Cd(II) in H-form of polyacrylic cation exchangers KB-2 and KB-2-12P was investigated. Increasing the sorption of surfactant the decrease in both the stability of Cd(II) complex with cation exchanger and the equilibrium sorption of Cd(II) was observed. The isotherms of the sorption were measured; the coefficients of intraparticle diffusion (D) were calculated. The integration of the filter filled with polyacrylic cation exchanger into the system of sewage purification is suggested.     

Thermal degradation studies of polystyrene sulfonic and polyacrylic carboxylic cationites

The thermal degradation of polyacrylic carboxylic and polystyrene sulfonic cationites was investigated using thermal analysis (TG) combined with Scanning Electron Microscopy (SEM). Fourier Transform Infrared Spectroscopy (FTIR) was used to characterize the resins degradation steps. The carboxylic cationite undergoes degradation through dehydration forming polyanhydrides, decomposition of polyanhydrides through decarboxylation with elimination of CO₂ and CO. The sulfonic cationite undergoes degradation through dehydration, followed by decomposition of sulfonic acid functional groups liberating SO₂. It was observed that strong acid (−SO₃H⁺) cationite shows small mass loss of 55%, as against 88% mass loss shown by low-acidity carboxylic cationite. The possible reason for small mass loss of sulfonic cationite is discussed. The text was submitted by the authors in English.     

Synthesis and properties of a new family of phosphorus- and nitrogen-containing ionenes

Polyquaternization reactions of bis[2-(4-pyridyl)ethyl]phenylethylphosphine oxide and tris[2-(4-pyridyl)ethyl]phosphine oxide with 1,4-dibromobutane were implemented for the first time to give linear (water-soluble) and cross-linked (limitedly water swelling), respectively, representatives of new phosphorus- and nitrogen-containing ionenes. The synthesized linear ionenes react with heparin and polyacrylic acid yielding water-insoluble polyelectrolyte complexes.     

Sorption of Zinc Ions by a Nonwoven Polypropylene Material Modified with Poly(acrylic acid) Grafted to the Fiber Surface: The Role of Grafting Density and Hydrogen Bonds

A microfiber carboxylic cationite is prepared via the photoinduced polymerization of acrylic acid on the surface of nonwoven polypropylene material. Changes in the amount of the graft polymer (grafting density) and in the strength of hydrogen bonds between its carboxyl groups, depending on the polymerization time, are investigated by attenuated total internal reflectance FTIR spectroscopy. The sorption properties of the obtained ionite in the acidic (COOH) and salt (COONa) forms with respect to Zn²⁺ ions at various grafting densities are studied. The sorption capacity of the investigated cationite in its salt form is higher than that in the acidic form, and this difference increases quickly with the grafting density. The data of IR spectroscopy showed that this behavior is caused by the formation of stronger hydrogen bonds between COOH groups of the grafted polyacrylic acid, complicating their ionization and, thus, preventing the ion exchange.     

Etude de la pyrolyse a temperature moderee des acides polyacrylique et polymethacrylique

High purity samples of polyacrylic and polymethacrylic acids have been pyrolysed between 160 and 240° in non-oxidative atmospheres. Thermal behaviours of these polymers have been studied by thermogravity, infra-red spectroscopy, acid titration of pyrolysates and particularly by a chromatographic method which allows analysis of products from polymer pyrolysis and specification simultaneously of the kinetics of their formation. In both cases, the kinetics of evolution of light products indicates a competition between dehydration and decarboxylation reactions. These two reactions are not independent. Dehydration is the main reaction and the nearly exclusive one for polymethacrylic acid but its importance decreases as the temperature is raised. Formation of small amounts of monomer has been noticed for polymethacrylic acid.     

INFLUENCE OF THE SOLVENT SWELLING ON MACROMOLECULAR CHOLESTERIC LIQUID CRYSTALLINE STRUCTURE*

Ethyl-cyanoethyl cellulose [(E-CE)C]/cross-linked polyacrylic acid [PAA] molecular compositeswith cholesteric order were prepared. It was found that the macromolecular cholesteric structure was changedwith the swelling of PAA in the composites. The selective reflection of the cholesteric phase shifted to thelonger wavelength and the X-ray diffraction angle shifted to the high angle direction during swelling, whichsuggested that the cholesteric pitch and the number of the layers of ordered (E-CE)C chains in the cholestericphase were increased.     

“Recognition” of copolymers and stereoisomers in macromolecule complexation reactions in dilute solutions

Theoretical relationships have been obtained describing the dependence of selectivity (or molecular “recognition”) on the length of reacting polymer chains in reactions between complementary macromolecules. The possibility of highly efficient separation of mixtures of macromolecules, differing little in chemical structure, was predicted as well as of fractionation of compositionally inhomogeneous copolymers by means of polymer-polymer interactions. Experimentally it has been found that polyethylene glycol mixed with polymethacrylic acid stereoisomers is selectively bound in a polycomplex with macromolecules enriched with iso-triads; polyvinylpyrrolidone is selectively bound to those poor in iso-triads. Polyvinylpyrrolidone selectively binds polymethacrylic acid in mixtures with copolymers of acrylic and methacrylic acids. The degree of “recognition” of a macromolecule of given chemical structure by an oligomer increases with increasing oligomer chain length and is in a quantitative agreement with the theoretical equation. It has been shown that, in aqueous solution for interaction of polyacrylic acid with compositionally inhomogeneous copolymer of 4-vinylpyridine and N-ethyl-4-vinylpyridinium bromide (partially quaternized polyvinylpyridine), the polyacrylic acid binds selectively the fractions rich in non-alkylated units. This result can be explained quantitatively in terms of the theory.     

Effect of zinc chloride on thermal decomposition of polymethacrylic and polyacrylic esters

Zinc chloride reduces the rate of thermal and thermooxidative decompositions of polymethacrylic esters and increases the thermal decomposition rate of polyacrylic esters. Mechanisms of the thermal decompositions of polymethacrylates and polyacrylates in the presence of ZnCl₂ have been suggested.For thermal decomposition polymethacrylic esters, the rate of depolymerization decreases due to the formation of cycles in a polymer chain by reaction of Zinc chloride with neighbouring ester groups. For thermooxidative decomposition of polymethacrylates, ZnCl₂ decreases also the rate of initiation of depolymerization and causes decomposition of hydroperoxide groups by a heterolytic mechanism. The increase in thermal decomposition rate of polyacrylic esters results from the high activity of complexes of ester groups and ZnCl₂ in decomposition reactions with formation of alcohol and CO₂ through Cameron mechanism.     

Hybrid hydrogels based on cross-linked polyacrylic acid and polyvinyl alcohol as electrically controlled artificial muscles

A procedure was developed for preparing hybrid hydrogel specimens of preset configuration from cross-linked polyacrylic acid and polyvinyl alcohol. The specimens exhibit higher mechanical characteristics compared to hydrogels of cross-linked polyacrylic acid. Hydrogel specimens fabricated in the form of elastic rings demonstrate an electromechanical response, contraction on passing electric current through their cross section. This effect is more pronounced for the specimens swollen in a sodium sulfate solution than for those swollen in distilled water. The results obtained show that the hydrogels can be used as a linearly operating mechanical force generator (artificial muscle).     

Specific Features of Interaction of Polyacrylic and Polymethacrylic Acids with Nanoparticles of Amorphous Selenium

A study was made of formation of selenium nanoparticles in water from reduction of sodium selenite with ascorbic acid in the presence of polyacrylic and polymethacrylic acids.     

Thermosensitive pluronic micelles stabilized by shell cross-linking with gold nanoparticles

Gold nanoparticles were employed to prepare shell cross-linked Pluronic micelles that exhibit a reversibly thermosensitive swelling/shrinking behavior. Two terminal hydroxyl groups of Pluronic F127 were thiol-functionalized to form self-assembling Pluronic micelles in aqueous solution with exposed -SH groups in an outer shell layer. The thiol groups present in the outer shell were cross-linked by gold nanoparticles synthesized through NaBH4 reduction of gold precursor anions. The resultant shell cross-linked gold-Pluronic micelles exhibited a temperature-dependent volume transition: their hydrodynamic diameter was changed from 157.1 +/- 15.6 nm at 15 degrees C to 53.4 +/- 5.5 nm at 37 degrees C as determined by dynamic light scattering. The critical micelle temperature measured by a pyrene solubilization technique suggested that the reversible swelling/shrinking behavior of the micelles was caused by hydrophobic interactions of cross-linked or grafted Pluronic copolymer chains in the micelle structure with increasing temperature. Transmission electron microscopy directly revealed that the shell cross-linked micelles were indeed produced by gold nanoparticles covalently clustered on the surface. These novel self-assembled organic/inorganic hybrid micelles would hold great potential for diagnostic and therapeutic applications.     

乙基氰乙基纤维素/交联聚丙烯酸复合物膜的溶胀行为

研究了乙基氰乙基纤维素 [(E CE)C] 交联聚丙烯酸 [PAA]胆甾相液晶复合物膜的厚度以及膜的组成对膜在水中的溶胀行为的影响 .复合物膜越厚则达到溶胀平衡所需要的时间越长 ,但是其最大溶胀率是相同的 .复合物膜的最大溶胀率先是随着 (E CE)C浓度的增加而增加 ,当 (E CE)C的浓度大于 5 1wt%的时候 ,复合物膜的最大溶胀率几乎不再发生变化 .复合物膜的交联密度越大 ,其最大溶胀率越小 ,溶胀速率也随着膜的交联 (点 )密度的增加而减小 .研究还发现复合物膜的交联 (点 )密度越大 ,其溶胀前后最大选择性反射光波长的位移也越小 .     

Structure of Free Radicals Formed under X-ray Irradiation of Organic Polymeric Acids

The structure of free radicals formed under X-ray irradiation of polyacrylic and polymetharcylic acids and poly-3-vinyltetrazole was studied by ESR spectroscopy. In polymerization of polymethacrylic acid, the conditions of the polymer recovery from the solution affect the nature of the radiolysis products.     

The synthesis and characterization of monodisperse poly(acrylic acid) and poly(methacrylic acid)

A number of polyacrylic (PAA) and polymethacrylic (PMAA) acids have been synthesized by living anionic polymerization of the monomeric tert-butyl esters followed by subsequent hydrolysis of the corresponding polyesters. The necessary precautions were taken in order to assure good molecular weight control, as well as high yields in the polymerization reactions. The intermediate and final polymers were characterized by gel permeation chromatography and NMR-H¹ spectrometry.     

Determination of the antiplatelet agent. KB-3022, and its metabolite by high-performance liquid chromatography

A rapid, accurate and reproducible high-performance liquid chromatographic method for the simultaneous determination of a new antiplatelet agent, ethyl 2-[4,5-bis(4-methoxyphenyl)thiazol-2-yl]pyrrol-1-ylacetate (KB-3022), and its main metabolite, 2-[4,5-bis(4-methoxyphenyl)thiazol-2-yl]pyrrol-1-ylacetic acid (desethyl KB-3022), in biological fluids has been developed. KB-3022 and desethyl KB-3022 in plasma or urine were extracted with a mixture of n-hexane and dichloromethane (1:1), separated on a reversed-phase C18 column with a mixture of 0.01 M (NH4)2HPO4 (pH 3.0), acetonitrile and isopropyl alcohol as a mobile phase, and quantitated by ultraviolet absorbance measurement at 340 nm. 4-[2-(4,5-bis(4-methoxyphenyl)thiazol-2-yl)pyrrol-1-yl]butyric acid was used as an internal standard. The detection limit of KB-3022 in plasma was 3 ng/ml, and that of KB-3022 in urine and desethyl KB-3022 in plasma or urine was 1 ng/ml. The coefficients of variation for the determination of KB-3022 or desethyl KB-3022 in plasma or urine were below 5.6%. This method was applied to the determination of the plasma concentration of KB-3022 and desethyl KB-3022 after intravenous administration to rats.     

Efficient synthesis of sterically stabilized pH-responsive microgels of controllable particle diameter by emulsion polymerization

Emulsion polymerization of 2-vinylpyridine (2VP) in the presence of divinylbenzene (DVB) cross-linker, a cationic surfactant, and a hydrophilic macromonomer, monomethoxy-capped poly(ethylene glycol) methacrylate (PEGMA), at around neutral pH and 60 degrees C afforded near-monodisperse, sterically stabilized latexes at approximately 10% solids. Judicious selection of the synthesis parameters enabled the mean latex diameter to be varied over an unusually wide range for one-shot batch syntheses. Scanning electron microscopy studies confirmed near-monodisperse spherical morphologies, with mean weight-average particle diameters ranging from 370 to 970 nm depending on the initiator, polymeric stabilizer, and surfactant concentrations. Particle sizing studies were also conducted using disk centrifuge photosedimentometry and dynamic light scattering and gave similar data. These lightly cross-linked latexes acquired cationic microgel character at low pH, as expected. The critical pH for this latex-to-microgel transition was around pH 4.1 at 1.0 wt % DVB, which is significantly lower than the pKa of 4.92 estimated for linear P2VP homopolymer by acid titration. 1H NMR and aqueous electrophoresis studies indicated that substantial swelling occurred at low pH due to protonation of the 2VP groups, while dynamic light scattering (DLS) studies indicated volumetric swelling ratios of up to 3 orders of magnitude, depending on the initial latex diameter. Systematic variation of the degree of cross-linking led to a monotonic decrease in the pKa values of the P2VP latexes (as judged by acid titration) and also the critical swelling pH (as judged by visual inspection). This was attributed to the increasingly branched nature of the P2VP chains in their swollen microgel form. Preliminary studies of the kinetics of acid-induced swelling were also conducted using the pH jump method in conjunction with a stopped-flow apparatus. These P2VP latexes swell significantly faster than P2VP latexes described in the literature and the characteristic time scales observed in the present study are much closer to those predicted by the Tanaka equation.