Adsorption and inhibition properties of Tephrosia Purpurea as corrosion inhibitor for mild steel in sulphuric acid solution

Abstract

The present study investigated the adsorption and inhibition behavior of leaf extract of Tephrosia Purpurea (T. purpurea) on mild steel corrosion in 1?N H₂SO₄ solution using electrochemical and surface morphological methods. Techniques adopted for electrochemical studies were Potentiodynamic Polarization and Electrochemical Impedance Spectroscopy (EIS) technique; and surface morphological studies were carried out using Scanning Electron Microscopy (SEM), and Atomic Force Microscopy (AFM). The leaf extract of T. purpurea was characterized using UV-Visible spectroscopy (UV-Vis), Fourier-Transform Infrared Spectroscopy (FT-IR), Nuclear Magnetic Resonance Spectroscopy (NMR) and Gas Chromatography – Mass Spectrometry (GCMS). The results obtained from electrochemical studies exhibited the potential of T. purpurea as good corrosion inhibitor. And, it was found that, the inhibition efficiency (I.E in %) increases with increase in concentration of the inhibitor molecules, the optimum inhibitor concentration observed was 300?ppm and the inhibition efficiency of 93% was observed at this inhibitor concentration. Above 300?ppm, there was not much changes in inhibition efficiency. Polarization studies provided the information that the inhibition is of mixed type and EIS confirmed that the corrosion process is controlled by single charge transfer mechanism. And, it was obtained that, the adsorption of inhibitor molecules obeys Langmuir adsorption isotherm. The inhibition is mainly by the adsorption of inhibitor molecules on the mild steel electrode surface, which was confirmed by FT-IR, SEM and AFM studies. Through all the experimental results, it can be arrived that, the leaf extract of T. purpurea performed as a good corrosion inhibitor for mild steel in 1?N sulfuric acid medium.     

Xanthione: A new and effective corrosion inhibitor for mild steel in sulphuric acid solution

The adsorption and inhibition effect of xanthione (XION) on mild steel in 0.5 M H₂SO₄ at 303–333 K were studied using gravimetric and UV–visible spectrophotometric methods. The results obtained show that XION acts as an effective corrosion inhibitor for mild steel in sulphuric acid and inhibition efficiency reaches 98.0% at a very low inhibitor concentration of 10 μM. Inhibition efficiency was found to increase with increase in XION concentration but decreased with temperature suggesting physical adsorption mechanism. Arrhenius law and its transition equation lead to estimate the activation parameters of the corrosion process. XION inhibits the corrosion of mild steel effectively at moderate temperature and adsorbs according to the Langmuir isotherm. Thermodynamic parameters governing the adsorption process have been calculated and discussed. The UV–visible absorption spectra of the solution containing the inhibitor after the immersion of mild steel specimen indicate the formation of a XEN–Fe complex. Attempt to correlate the molecular structure to quantum chemical indices was made using density functional theory (DFT).     

Adsorption and corrosion inhibition of mild steel in hydrochloric acid solution by verbena essential oil

The inhibitive action of verbena essential oil (VEO) on the corrosion of mild Steel in 1 M HCl solutions in the temperature range 298 to 328 K was measured by use of the weight-loss method, potentiodynamic polarization, and electrochemical impedance spectroscopy. Results showed that VEO inhibited corrosion of C38 steel in 1 M HCl solution and that inhibition efficiency increased with increasing concentration of inhibitor but decreased proportionally with temperature. Potentiodynamic polarization studies suggested VEO is a mixed-type inhibitor, with the anodic type predominating. Nyquist plots were depressed semicircles with their centre below the real axis. Adsorption of VEO by the C38 steel surface followed the Langmuir adsorption isotherm. Kinetic data for dissolution were investigated.     

Effect of Avogadro natural oil on the corrosion inhibition of mild steel in hydrochloric acid solution

The inhibition action of Avogadro natural oil on corrosion of mild steel in one molar hydrochloric acid solution was investigated by gravimetric and potentiodynamic polarization techniques. The surface morphology of as-corroded samples was assessed with high resolution scanning transmission electron microscopy equipped with energy dispersive spectroscopy (HR-STEM/EDS). From the results, the presence of Avogadro natural oil in the metal–acidic interface decreased the corrosion rate with all the exposure times. The inhibition efficiency (%IE) increases with the concentration of the inhibitor considered. Results obtained from gravimetric measurements indicate that the natural oil exhibited higher efficiencies of 93.26 % after 384 h of exposure time and 98.26 % recorded in the potentiodynamic polarization method, both at 4.5 g/v inhibitor addition. Equally, results from the linear polarization indicated higher potential value with an increase in the polarization resistance (R _p) and lower current density for the inhibited samples than the uninhibited mild steel sample. The inhibitive effect of this oil was explained in view of adsorption on the metal surface. The adsorption process follows the Langmuir adsorption isotherm.     

Adenosine as corrosion inhibitor for mild steel in hydrochloric acid solution

Research on Chemical Intermediates - (2R,3R,4S,5R)-2-(6-amino-9H-purin-9-yl)-5-(hydroxymethyl)oxolane-3,4-diol (adenosine) is an identified component present in agarwood leaf extract. The corrosion...     

Inhibiting effects of benzamide derivatives on the corrosion of mild steel in hydrochloric acid solution

The inhibition effect of new heterocyclic compounds, namely N-(cyanomethyl)benzamide (BENZA) and N-[(1H-tetrazol-5-yl)methyl]benzamide (BENZA-TET), on mild steel corrosion 1 M HCl was investigated using electrochemical measurements. The results indicated that the inhibition efficiency depends on concentration, immersion time and temperature. The BENZA is a better inhibitor than BENZA-TET. Polarization measurements showed that the inhibitor BENZA-TET is a cathodic type, but BENZA acts as a mixed type inhibitor. In addition, the changes in impedance parameters indicated that these compounds adsorbed on the metal surface leading to the formation of a protective film. Adsorption of benzamide derivatives on the mild steel surface was investigated to consider basic information on the interaction between the inhibitors and the metal surface. It was found to obey the Langmuir adsorption isotherm. From the temperature dependence, the activation energy in the presence of (BENZA) was found to be inferior to that in uninhibited medium. In order to explain why BENZA is the most efficient inhibitor, quantum chemical calculations were applied. The relationships between quantum chemical parameters and corrosion inhibition efficiency have been discussed to see if there is any correlation between them.     

Corrosion inhibition performance of tannins for mild steel in hydrochloric acid solution

Research on Chemical Intermediates - The corrosion inhibition behavior of commercial hydrolysable tannin (tara tannin), condensed tannin (black wattle tannin) and complex tannin (bayberry tannin)...     

Adsorption behavior and corrosion inhibitive potential of xanthene on mild steel/sulphuric acid interface

The inhibition of xanthene (XEN) on the corrosion of mild steel in 0.5 M H₂SO₄ was studied by gravimetric and UV–visible spectrophotometric methods at 303–333 K. Results obtained show that XEN act as inhibitor for mild steel in H₂SO₄ solution. The inhibition efficiency was found to increase with increase in XEN concentration but decreased with temperature. Activation parameters and Gibbs free energy for the adsorption process using Statistical Physics were calculated and discussed. The corrosion process in 0.5 M H₂SO₄ in the absence and presence of XEN follows zero-order kinetics. The UV–visible absorption spectra of the solution containing the inhibitor after the immersion of mild steel specimen indicate the formation of a XEN–Fe complex. Quantum chemical calculations using DFT were used to calculate some electronic properties of the molecule in order to ascertain any correlation between the inhibitive effect and molecular structure of xanthene.     

Adsorption and inhibition effect of curcumin on mild steel corrosion in hydrochloric acid

The inhibition effect of curcumin on the corrosion of mild steel in 1.0 M HCl solution was studied by weight loss, potentiodynamic polarization curves and electrochemical impedance spectroscopy (EIS) methods. The experimental results suggest that this compound is an efficient corrosion inhibitor and the inhibition efficiency increases with the increase in inhibitor concentration. Adsorption of this compound on mild steel surface obeys Langmuir isotherm. Also the objective of this work is to attempt to find relationships between electronic structure and inhibition efficiency. The structural parameters, such as the frontier molecular orbital energies (E _HOMO and E _LUMO), gap of energy ΔE, from the molecule to iron as well as electronic parameters such as Mulliken atomic populations were calculated and discussed using the Density Functional Theory method (DFT).     

Inhibitive effect of chloroquine towards corrosion of mild steel in hydrochloric acid solution

Corrosion inhibition of mild steel (MS) by chloroquine (CQ) in 1 M HCl was investigated using weight loss, polarization, electrochemical impedance spectroscopy (EIS) and quantum chemical techniques. The inhibitor showed 99 % inhibition efficiency at concentration of 3.1 × 10^?4 M. Polarization studies showed that CQ is a mixed-type inhibitor. Adsorption of inhibitor molecules on the MS surface showed Langmuir adsorption isotherm. Thermodynamic parameters led to the conclusion that adsorption is predominantly chemisorption. Quantum chemical calculations were carried out to investigate the corrosion-inhibiting property of CQ. Various parameters such as energy of the highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO), softness of molecule, Mullikan charges on various atoms and number of electrons transferred from inhibitor molecule to metal were calculated and correlated with the inhibiting property of CQ.     

Electrochemical studies of mild steel corrosion inhibition in sulfuric acid chloride by aniline

The corrosion behavior of mild steel in dilute hydrochloric acid under the inhibiting action of various concentrations of aniline was studied using the weight loss and linear polarization resistance technique. The efficiency of the inhibitor increased with the increase in the inhibitor concentration. The results obtained reveal that aniline performed effectively as a corrosion inhibitor. The adsorption mechanism indicates mixed molecular interaction from values of Gibbs free energy. The values of the inhibition efficiency calculated from the two techniques are in reasonably good agreement. The adsorption of the inhibiting compound was found to obey Langmuir, Frumkin and Freudlich adsorption isotherms. The mechanism of inhibition was discussed in the light of the chemical structure of the inhibiting compound and their adsorption on steel surfaces in relation to the potentiodynamic parameters.     

Experimental and theoretical investigation on adsorption and corrosion inhibition properties of imidazopyridine derivatives on mild steel in hydrochloric acid solution

Imidazopyridine derivatives, namely 4‐methoxy‐N‐((2‐(4‐methoxyphenyl)H‐imidazo[1,2‐a]pyridin‐3‐yl)methylene)benzenamine (MMPIPB) and 4‐chloro‐N‐((2‐(4‐methoxyphenyl)H‐imidazo[1,2‐a]pyridin‐3yl)methylene)benzenamine (CMPIPB), were investigated as inhibitors for mild steel corrosion in 15% HCl solution using the weight loss and electrochemical techniques. According to electrochemical impedance spectroscopy studies, MMPIPB and CMPIPB show corrosion inhibition efficiency of 84.8 and 77.2% at 10‐ppm concentration and 98.1 and 94.8% at 80‐ppm concentration, respectively at 303 K. The corrosion inhibition efficiency of both inhibitors increased with increasing inhibitor concentration and decreased with increasing temperature. The adsorption of both inhibitor molecules on the surface of mild steel obeys Langmuir adsorption isotherm. Polarization studies showed that both studied inhibitors were of mixed type in nature. Electrochemical impedance spectroscopy studies showed that for both inhibitors, the value of charge transfer resistance increased and double‐layer capacitance decreased on increasing the concentration of inhibitors. Scanning electron microscopy, energy‐dispersive X‐ray spectroscopy (EDX), and atomic force microscopy were performed for surface study. The density functional theory was employed for theoretical calculations. Copyright © 2014 John Wiley & Sons, Ltd.     

Synergistic inhibition effects between leaves and stem extracts of Sida acuta and iodide ion for mild steel corrosion in 1 M H2SO4 solutions

The synergistic action caused by iodide ions on the corrosion inhibition of mild steel in 1 M H₂SO₄ by leaves and stem extracts of Sida acuta was studied using weight loss and hydrogen evolution methods at 30–60 °C. It was found that the leaves and stem extracts of S. acuta inhibited the acid induced corrosion of mild steel. Addition of iodide ions enhances the inhibition efficiency to a considerable extent. The inhibition efficiency increases with increase in the iodide ion concentration but decreases with rise in temperature. Adsorption of the extracts alone and in combination of iodide ion was found to obey Freundlich adsorption isotherm at all temperatures studied. Inhibition mechanism is deduced from the temperature dependence of the inhibition efficiency as well as from assessment of kinetic and activation parameters that govern the processes. The synergism parameter (S₁) is defined and evaluated from the inhibition efficiency values. This parameter for the different concentrations of iodide ions from the two techniques employed is found to be greater than unity indicating that the enhanced inhibition efficiency of the extracts caused by the addition of iodide ions is due to synergism.     

Inhibition of cold rolled steel corrosion in sulphuric acid solution by 2-mercapto-1-methylimidazole: Time and temperature effects treatments

2-Mercapto-1-methylimidazole (MMI) has been evaluated as a corrosion inhibitor for cold rolled steel in aerated 2 M H₂SO₄ by gravimetric method. The effect of MMI on the corrosion rate was determined at various immersions time and concentrations. The effect of the temperature on the corrosion behaviour with addition of different concentrations of MMI was studied in the temperature range 30–60 °C. The MMI acts as an effective corrosion inhibitor for cold rolled in sulphuric acid medium. The inhibition process is attributed to the formation of an adsorbed film of MMI on the metal surface which protects the metal against corrosion. The protection efficiency increased with increase in inhibitor concentration at various immersions time and decreased with increase in temperature. Adsorption of MMI on the cold rolled steel surface is found to obey the Langmuir adsorption isotherm. Some thermodynamic functions of dissolution and adsorption processes were also determined.     

A study of synthesized Mannich base inhibition on mild steel corrosion in acid medium

1((Cyclohexylamino)methyl)urea Mannich base was synthesized and characterized using FT-IR, H¹NMR and C¹³NMR spectra and it was tested as a corrosion inhibitor for mild steel in 1?N HCl and 1?N H₂SO₄ solutions using potentiodynamic polarization and AC impedance techniques over the temperature range of 303?C333?K. The inhibition efficiency was increased with respect to concentration of inhibitor and temperature in 1?N HCl, whereas the inhibition efficiency was increased with respect to concentration of inhibitor and decreased with respect to temperature in 1?N H₂SO₄. Potentiodynamic polarization results revealed that the inhibitor acts as mixed type inhibitor. AC impedance study indicates that the corrosion of steel was mainly controlled by a charge transfer process. Surface analysis was carried out using SEM technique. The adsorption of inhibitor follows Langmuir adsorption isotherm. Activation and adsorption parameters were calculated to gain information about the inhibitive action mechanism.     

Effect of polyacrylic acid on the corrosion behaviour of aluminium in sulphuric acid solution

Electrochemical techniques using both ac and dc as well as surface analyses approach were used to investigate the corrosion inhibition characteristics of polyacrylic acid (PAA) for pure cast aluminium in 0.5 M H₂SO₄ at 30 ± 1 °C. The effect of iodide ion additives was also studied. The results obtained indicate that PAA inhibited the corrosion of pure cast aluminium in the acid medium by adsorption onto the metal surface following Frumkin adsorption isotherm model. Inhibition efficiency increases with an increase in PAA concentration and synergistically enhanced by the addition of iodide ions. A mixed inhibition mechanism is proposed for the inhibitive effects of PAA as revealed by potentiodynamic polarisation technique. Synergism parameter evaluated was found to be greater than unity, indicating that the enhanced inhibition efficiency of PAA on addition of iodide ions was synergistic in nature. Fourier transform infrared analyses revealed that the synergistic effect of iodide ions and PAA is due to co-adsorption of iodide ions and PAA molecules which is cooperative in nature.     

Poly(4-vinylpyridine-hexadecyl bromide) as corrosion inhibitor for mild steel in acid chloride solution

The influence of the addition of poly(4-vinylpyridine-hexadecyl bromide) P4VP-Alkyl 50?% newly synthesized on the corrosion of mild steel in molar hydrochloric acid has been investigated by weight-loss measurements combined with linear potential scan voltammetry (I?CE) and electrochemical impedance spectroscopy (EIS). The polymer reduces the corrosion rate and the inhibition efficiency (E?%) of P4VP-Alkyl 50?% increases with its concentration and attains 95?% at 300?mg/L. E?% obtained from cathodic Tafel plots, EIS, and gravimetric methods were in good agreement. The inhibitor was adsorbed on the iron surface according to the Langmuir adsorption isotherm model. Polarization measurements also show that the compound acts as a cathodic inhibitor.     

Inhibition of mild steel corrosion in HCl solution using chitosan

The efficiency of chitosan (a naturally occurring polymer) as a corrosion inhibitor for mild steel in 0.1 M HCl was investigated by gravimetric, potentiodynamic polarization, electrochemical impedance spectroscopy measurements, scanning electron microscopy, and UV–visible analysis. The polymer was found to inhibit corrosion even at a very low concentration. Inhibition efficiency increases with a rise in temperature up to 96 % at 60 °C and then drops to 93 % at 70 °C, while it slightly increases with an increase in chitosan concentration. Polarization curves indicate that chitosan functions as a mixed inhibitor, affecting both cathodic and anodic partial reactions. Impedance results indicate that chitosan was adsorbed on the metal/solution interface. Adsorption of chitosan at the mild steel surface is found to be in agreement with Langmuir adsorption isotherm model. Chemical adsorption is the proposed mechanism for corrosion inhibition considering the trend of protection efficiency with temperature. Calculated kinetic and thermodynamic parameters corroborate the proposed mechanism.     

Indole‐3‐acetic acid and N‐acetyltryptophan corrosion inhibition effects on mild steel in 1 M hydrochloric acid solution

Corrosion inhibition of indole‐3‐acetic acid and N‐acetyl tryptophan on carbon steel was investigated using polarization and electrochemical impedance spectroscopy (EIS). Polarization results revealed that corrosion inhibitors could reduce the rate of cathodic and anodic reactions on metal surface. EIS analysis showed inhibition efficiency of indoles increases by increasing the inhibitor concentration. The maximum inhibition efficiency was 97% and 80% in solutions containing 10 mM indole‐3‐acetic acid and 10 mM N‐acetyl tryptophan, respectively. The adsorption of inhibitors was found to follow Langmuir isotherm. Adsorption and film formation of inhibitors on the metal substrate were confirmed by calculating thermodynamic adsorption parameter (ΔG⁰_ads) and characterization of exposed metals' surface through contact angle measurements. Copyright © 2014 John Wiley & Sons, Ltd.     

Corrosion and corrosion inhibition characteristics of bulk nanocrystalline ingot iron in sulphuric acid

The corrosion and corrosion inhibition of bulk nanocrystalline ingot iron (BNII) fabricated from conventional polycrystalline ingot iron (CPII) by severe rolling was studied in 0.5 M H₂SO₄ solution using electrochemical impedance spectroscopy and potentiodynamic polarization techniques. The results indicate that BNII was more susceptible to corrosion in the acidic environment essentially because of an increase in the kinetics of the anodic reaction. An amino acid cysteine (cys) was employed as a corrosion inhibitor at concentrations of 0.001 and 0.005 M. Tests in inhibited solutions revealed that cys reduced the corrosion rates of both metal specimens by different mechanisms. For CPII cys inhibited the cathodic reaction but had a stimulating effect on the anodic process at low concentration and a trivial effect at higher concentration. For BNII, cys inhibited both the cathodic and the anodic reactions, although the former effect was more pronounced. Iodide ions improved the inhibitive effect of cys without altering the inhibition mechanism.