Preparation of various Janus composite particles with two components differently combined

Janus composite particles with a combination of organic and inorganic substances were synthesized by soap-free emulsion polymerization in which an amphoteric initiator of 2,2′-azobis[N-(2-carboxyethyl)-2-2-methylpropionamidine] (VA-057) was employed to introduce a polystyrene (PSt) lobe onto silica cores surface-modified with 3-methacryloxypropyltrimethoxy silane (MPTMS). Thermogravimetric analysis and X-ray photoelectron spectroscopy were used to characterize the surface-modified silica particles and showed that a small amount of MPTMS introduced onto the surface of silica particles could successfully prepare SiO₂–PSt Janus particles. The oxide part of SiO₂–PSt Janus particles obtained with the polymerization was further surface-modified with 3-aminopropyltriethoxysilane (APS) to introduce positively charged amino groups on the silica surface. The silica surface modified with APS was covered with gold by electroless deposition in which a gold precursor of auric chloride was reduced with ascorbic acid in the presence of polyvinylpyrrolidone. The electroless deposition of gold successfully produced Janus particles with a combination of gold and PSt surfaces. Furthermore, dissolution of the polymer component of the Au–PSt Janus particles in tetrahydrofuran led to another Janus type of particles with an inorganic combination of Au and SiO₂.     

A Versatile New Paradigm for the Design of Optical Nanosensors Based on Enzyme-Mediated Detachment of Labeled Reporters: The Example of Urea Detection

Here, a new bio-inspired nanoarchitectonics approach for the design of optical probes is presented. It is based on nanodevices that combine 1) an enzymatic receptor subunit, 2) a signaling subunit (consisting of a labeled reporter attached to a silica surface), and 3) a mechanism of communication between the two sites based on the production of chemical messengers by the enzymatic subunit, which induces the detachment of the reporter molecules from the silica surface. As a proof of concept, a urea nanosensor based on the release of Alexa-Fluor-647-labeled oligonucleotide from enzyme-functionalized Janus gold–mesoporous-silica nanoparticles (Au–MSNPs) was developed. The Janus particles were functionalized on the silica face with amino groups to which the labeled oligonucleotides were attached by electrostatic interactions, whereas the gold face was used for grafting urease enzymes. The nanodevice was able to release the fluorescent oligonucleotide through the enzyme-mediated hydrolysis of urea to ammonia and the subsequent deprotonation of amino groups on the silica face. This simple nanodevice was applied for the fluorometric detection of urea in real human blood samples and for the identification of adulterated milk. Given the large variety of enzymes and reporter species that could be combined, this is a general new paradigm that could be applied to the design of a number of optical probes for the detection of target analytes.     

Selective Janus Particle Assembly at Tipping Points of Thermally‐Switched Wetting

Thermal wetting can simply, selectively and reversibly join patchy particles into clusters (2D and 3D) and also colloidal crystals over the narrow temperature range of 1–2 °C. This is demonstrated with Janus particles (gold half‐coated silica spheres) immersed in a binary mixture of water/2,6‐lutidine, such that the relative strength of gold–gold bonding through hydrophobic interaction and silica–silica bonding through the wetting‐induced attraction is reversibly switched according to temperature.     

Novel fabrication of Janus particles from the surfaces of electrospun polymer fibers

A novel synthetic approach for the efficient fabrication of Janus silica particles was demonstrated by embedment of zero-dimensional colloids on one-dimensional polymer fiber surfaces, followed by the surface modification on the exposed silica hemispheres. Electrospinning of poly(methyl methacrylate) and poly(4-vinyl pyridine) blends produced polymer fibers with high specific surface area and desired surface hydrophilicities. Fiber compositions determined the colloid adsorption density and uniformity. The colloid embedding resulted from the polymer softening was manipulated by the isothermal heat treatment. Subsequent silianization completed the amino functionalities on hemispherical surfaces of embedded silica colloids. Janus particles with uniform asymmetric chemical features were further labeled with gold nanoparticles before their recovery from fiber substrates. Fabrication of Janus particles, including colloid adsorption, temperature-driven embedding, and hemispherical surface modification, were investigated and are discussed.     

Pickering乳液模板法制备Janus粒子

本文以SiO₂粒子稳定的水包油(O/W)型Pickering乳液作为模板, 在乳液连续相进行SI-ATRP, 将聚合物刷接枝到SiO₂粒子外半表面, 破乳得到半修饰的Janus粒子.     

Defining the characteristics of spherical Janus particles by investigating the behavior of their corresponding particles at the oil/water interface in a Pickering emulsion

In this study, a new analytical/experimental method is proposed in order to investigate the adsorption of different-sized spherical silica particles at the oil/water interface in a Pickering emulsion system as a well-known method to produce Janus particles. Accordingly, the characteristic of the produced silica Janus particles was defined based on their penetration depth into dispersed oil droplets. To ensure the accuracy of the method, the penetration depth of silica particles was also measured using field emission scanning electron microscopy images of solidified oil droplets covered with particles. The results revealed that the penetration depth increases with the size of the particles.     

Preparation and properties of silica–gold core–shell particles

Silica-metal core–shell particles, as for instance those having siliceous core and nanostructured gold shell, attracted a lot of attention because of their unique properties resulting from combination of mechanical and thermal stability of silica and magnetic, electric, optical and catalytic properties of metal nanocrystals such as gold, silver, platinum and palladium. Often, the shell of the core–shell particles consists of a large number of metal nanoparticles deposited on the surface of relatively large silica particles, which is the case considered in this work. Namely, silica particles having size of about 600 nm were subjected to surface modification with 3-aminopropyltrimethoxysilane. This modification altered the surface properties of silica particles, which was demonstrated by low pressure nitrogen adsorption at ?196 °C. Next, gold nanoparticles were deposited on the surface of aminopropyl-modified silica particles using two strategies: (i) direct deposition of gold nanoparticles having size of about 10 nm, and (ii) formation of gold nanoparticles by adsorption of tetrachloroauric acid on aminopropyl groups followed by its reduction with formaldehyde.The overall morphology of silica–gold particles and the distribution of gold nanoparticles on the surface of modified silica colloids were characterized by scanning electron microscopy. It was shown that direct deposition of colloidal gold on the surface of large silica particles gives more regular distribution of gold nanopartciles than that obtained by reduction of tetrachloroauric acid. In the latter case the gold layer consists of larger nanoparticles (size of about 50 nm) and is less regular. Note that both deposition strategies afforded silica–gold particles having siliceous cores covered with shells consisting of gold nanoparticles of tunable concentration.     

Production of large quantities of “Janus” nanoparticles using wax-in-water emulsions

For the first time, large amount of Janus silica particles as small as 100 nm in diameter were prepared through a simple method based on the elaboration of Pickering emulsions of wax-in-water. Controlling the kinetic stabilization of wax droplets allows the fabrication of gram-sized quantities of regular asymmetric inorganic particles with high yield. In fact, our method is based on a limited coalescence process, which allows one to predict the quantity of interface which is produced when working with a known mass of wax, and thus to be sure that all introduced silica particles are adsorbed on the wax surface. To this end, the hydrophilic surface of the silica particles was made partially hydrophobic by adsorbing a known amount of surfactant: cetyltrimethylammonium bromide (CTAB). Varying the concentration in surfactant results in tuning the penetration rate of the particles in the wax droplets, leading to various dimension of the modified area. The broken spherical symmetry of the particle surface was thereafter revealed by the selective adsorption of gold nanoparticles on the amino-modified surface.     

Determination of the size, concentration, and refractive index of silica nanoparticles from turbidity spectra

The size and concentration of silica cores determine the size and concentration of silica/gold nanoshells in final preparations. Until now, the concentration of silica/gold nanoshells with Stober's silica core has been evaluated through the material balance assumption. Here, we describe a method for simultaneous determination of the average size and concentration of silica nanospheres from turbidity spectra measured within the 400-600 nm spectral band. As the refractive index of silica nanoparticles is the key input parameter for optical determination of their concentration, we propose an optical method and provide experimental data on a direct determination of the refractive index of silica particles n = 1.475 +/- 0.005. Finally, we exemplify our method by determining the particle size and concentration for 10 samples and compare the results with transmission electron microscopy (TEM), atomic force microscopy (AFM), and dynamic light scattering data.     

Biphasic synthesis of Au@SiO2 core-shell particles with stepwise ligand exchange

We report the synthesis of well-dispersed core-shell Au@SiO(2) nanoparticles with minimal extraneous silica particle growth. Agglomeration was suppressed through consecutive exchange of the stabilizing ligands on the gold cores from citrate to L-arginine and finally (3-mercaptopropyl)triethoxysilane. The result was a vitreophilic, stable gold suspension that could be coated with silica in a biphasic mixture through controlled hydrolysis of tetraethoxysilane under L-arginine catalysis. Unwanted condensation of silica particles without gold cores was limited by slowing the transfer across the liquid-liquid interface and reducing the concentration of the L-arginine catalyst. In-situ dynamic light scattering and optical transmission spectroscopy revealed the growth and dispersion states during synthesis. The resulting core-shell particles were characterized via dynamic light scattering, optical spectroscopy, and electron microscopy. Their cores were typically 19 nm in diameter, with a narrow size distribution, and could be coated with a silica shell in multiple steps to yield core-shell particles with diameters up to 40 nm. The approach was sufficiently controllable to allow us to target a shell thickness by choosing appropriate precursor concentrations.     

Orthogonally dual-clickable Janus nanoparticles via a cyclic templating strategy

Synthetic asymmetrical systems, Janus particles and patchy particles, are capable of undergoing hierarchical assembly processes that mimic those of Nature, to serve as switchable devices, optical probes, phase-transfer catalysts, and multifunctional drug carriers, each of which benefits from opposing surface patterns that behave differently. Production of nanometer-sized Janus particles that are equipped with efficient chemistries remains a challenge. A robust Janus-faced polymer nanoparticle framework that presents two orthogonally click-reactive surface chemistries has been generated by a recyclable strategy that involves reactive functional group transfer by templating against gold nanoparticle substrates. This anisotropic functionalization approach is compatible with a wide range of soft materials, providing Janus nanoparticles for the construction of dual-functionalized devices by accurately controlling chemical functionality at the nanoscopic level.     

Sonochemical synthesis of magnetic Janus nanoparticles

The sonochemical synthesis of nanosized surface-dissymmetrical (Janus) particles is described. The Janus particles were composed of silica and polystyrene, with the polystyrene portion loaded with nanosized magnetite particles. It is shown that the Janus particles can be used to form kinetically stable oil-in-water emulsions that can be spontaneously broken on application of an external magnetic field. The one-pot synthetic process used to prepare the Janus particles has several advantages over other conventional methods of producing such particles.     

Solvent-free synthesis of Janus colloidal particles

Taking advantage of the quick and efficient access of vapor to surfaces, a simple, solvent-free method is demonstrated to synthesize Janus colloidal particles in large quantity and with high efficiency. First, at the liquid-liquid interface of emulsified molten wax and water, untreated silica particles adsorb and are frozen in place when the wax solidifies. The exposed surfaces of the immobilized particles are modified chemically by exposure to silane vapor and, in principle, subsequent dissolution of the wax opens up the inner particle surface for further chemical modification. Applying this scheme, this paper describes the production of amphiphilic Janus particles (hydrophobic on one side, hydrophilic on the other) and dipolar Janus particles (positively charged on one side, negatively charged on the other). Janus geometry is confirmed by fluorescence microscopy and flow cytometry. Amphiphilic Janus particles are found to adsorb strongly to the water-oil interface, whereas dipolar particles assemble into chains in the aqueous phase.     

两亲性Janus粒子在蜂窝状多孔聚合物膜上的自组装性能

采用具有两亲性的两面体(Janus)粒子实现稳定的粒子界面组装与水滴模板法自组装过程相结合的方法获得了粒子在蜂窝状多孔聚合物薄膜内壁的高效定向修饰.通过与均质粒子组装形貌的对比,证明了Janus粒子因其特殊的界面自组装活性,可以获得高粒子加量条件下的规则多孔结构,解决了使用均质粒子时存在的结构有序性和粒子修饰密度之间的矛盾.而在较低粒子加量的条件下,Janus粒子也展示出与均质粒子极为不同的组装形貌.这一方法的建立,为新型表面功能化材料的制备提供了一个新的思路.     

Synthesis and characterization of monodispersed core-shell spherical colloids with movable cores

Gold nanoparticles have been conformally coated with amorphous silica (using a sol-gel method) and then an organic polymer (via surface-grafted, atom transfer radical polymerization) to form spherical colloids with a core-double-shell structure. The thickness of silica and polymer shells could be conveniently controlled in the range of tens to several hundred nanometers by changing the concentration of the reagent and/or the reaction time. Selective removal of the silica layer (through etching in aqueous HF) led to the formation of hollow polymer beads containing movable gold cores. This new form of core-shell particles provides a unique system for measuring the feature size and transport property associated with hollow particles. In one demonstration, we showed that the thickness of a closed polymer shell could be obtained by mapping the electrons backscattered from the core and shell. In another demonstration, the plasmon resonance band of the gold cores was used as an optical probe to follow the diffusion kinetics of chemical reagents across the polymer shells.     

A general method for the controlled embedding of nanoparticles in silica colloids

A novel method for the controlled embedding of multiple nanoparticles of various materials, such as gold nanoparticles, quantum dots, and magnetic nanoparticles, in silica colloids is presented. After adsorption of the amphiphilic polymer poly(vinylpyrrolidone) on hydrophobic or hydrophilic stabilized nanoparticles, these are adsorbed on silica spheres and covered by variable-thickness silica shells. This silica coating protects the embedded nanoparticles against chemical transformations, which is of crucial importance for the biocompatibility of particles containing toxic elements. Moreover, it is found that the optical properties of the nanoparticles are retained. Possible applications of multicore particles are briefly discussed.     

Janus particles with a functional gold surface for control of surface plasmon resonance

We report in this study the presence of Janus particles, which are candidates for use with electronic color papers. We used negatively charged polystyrene particles (370 nm) as the core particles, and gold was then sputtered onto their packed monolayer under several conditions. The sputtered particles were next redispersed into the aqueous medium by gentle sonication. Gold nanoparticles localized on one side of the cores could also serve as seeds for subsequent shell growth by electroless gold plating. Through these treatments, a series of well-dispersed Janus particles were obtained with gold nanostructures of different size and shape only on one side. Their dispersions showed different colors originating from the surface plasmon resonance absorption of gold nanoparticles localized on the hemisphere. The particles obtained by this approach have potential applications such as in sensors and electronic color paper.     

A facile method of synthesis of asymmetric hollow silica spheres

This paper presents a "one-step" method to synthesize asymmetric hollow silica spheres. In this method, when positively charged polystyrene particles were blended with mercaptopropyltriethoxysilane and stirred at 50 °C in alkaline ethanol/water medium for a period of time, Janus or lobed asymmetric hollow silica spheres could be directly obtained, just changing the ratio of ethanol to water in the reaction medium. Transmission electron microscopy (TEM) and scanning electron microscopy (SEM) were used to characterize the morphology and topography of the asymmetric hollow silica spheres. The formation mechanism was described in detail.     

Reverse microemulsion-mediated synthesis of silica-coated gold and silver nanoparticles

A reverse microemulsion method is reported for preparing monodispersed silica-coated gold (or silver) nanoparticles without the use of a silane coupling agent or polymer as the surface primer. This method enables a fine control of the silica shell thickness with nanometer precision. As compared to the St?ber method reported for direct silica coating, which can only coat large gold particles ( approximately 50 nm in diameter) at low concentrations (<1.5 x 10(10) particles/mL), this new approach is capable of coating gold particles of a wide range of sizes (from 10 to 50 nm) at a much higher concentration ( approximately 1.5 x 10(13) particles/mL). Moreover, it enables straightforward surface functionalization via co-condensation between tetraethyl orthosilicate and another silane with the desired functional groups. The functional groups introduced by this method are readily accessible and thus useful for various applications.     

Silica-metal core-shell nanostructures

Silica-metal nanostructures consisting of silica cores and metal nanoshells attract a lot of attention because of their unique properties and potential applications ranging from catalysis and biosensing to optical devices and medicine. The important feature of these nanostructures is the possibility of controlling their properties by the variation of their geometry, shell morphology and shell material. This review is devoted to silica-noble metal core-shell nanostructures; specifically, it outlines the main methods used for the preparation and surface modification of silica particles and presents the major strategies for the formation of metal nanoshells on the modified silica particles. A special emphasis is given to the St?ber method, which is relatively simple, effective and well verified for the synthesis of large and highly uniform silica particles (with diameters from 100 nm to a few microns). Next, the surface chemistry of these particles is discussed with a special focus on the attachment of specific organic groups such as aminopropyl or mercaptopropyl groups, which interact strongly with metal species. Finally, the synthesis, characterization and application of various silica-metal core-shell nanostructures are reviewed, especially in relation to the siliceous cores with gold or silver nanoshells. Nowadays, gold is most often used metal for the formation of nanoshells due to its beneficial properties for many applications. However, other metals such as silver, platinum, palladium, nickel and copper were also used for fabrication of core-shell nanostructures. Silica-metal nanostructures can be prepared using various methods, for instance, (i) growth of metal nanoshells on the siliceous cores with deposited metal nanoparticles, (ii) reduction of metal species accompanied by precipitation of metal nanoparticles on the modified silica cores, and (iii) formation of metal nanoshells under ultrasonic conditions. A special emphasis is given to the seed-mediated growth, where metal nanoshells are formed on the modified silica cores with deposited metal nanoparticles. This strategy assures a good control of the nanoshell thickness as well as its surface properties.