Solubility of some carrier gases in stationary liquid phases used in gas-liquid chromatography

A simple gas chromatographic technique for the determination of the solubility of gases in low-volatile liquids was proposed. The procedure is based on the introduction of a certain volume of the liquid saturated with the gas at atmospheric pressure into a gas chromatograph. The solubility of carrier gases (helium, hydrogen, nitrogen, methane, and carbon dioxide) in various stationary liquid phases (SLP), such as pentadecane, polydimethylsiloxane PMS-100, and polyethylene glycol PEG-600, was studied. The carrier gases studied can be arranged in the following series by solubility in SLP: He<H₂<N₂<CH₄<CO₂. This order coincides with the series reflecting change in the retention values in GLC for different carrier gases. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 5, pp. 923–925, May, 1999.     

Synthesis and chromatographic evaluation of phenyl/tetrazole bonded stationary phase based on thiol‐epoxy ring opening reaction

A silica‐based reversed‐phase stationary phase bonding with phenyl and tetrazole groups was synthesized by thiol‐epoxy ring opening reaction. The bonded groups could not only provide hydrophobic interaction, but also π–π, hydrogen bonding, electrostatic interactions, and so on. The results of characterization with elemental analysis and solid‐state ¹³C cross‐polarization magic‐angle‐spinning NMR spectroscopy indicated the successful preparation of phenyl/tetrazole sulfoether bonded stationary phase. Chromatographic evaluation revealed that phenyl/tetrazole sulfoether bonded stationary phase behaved well under the reversed‐phase mode. The column parameters (H, S*, A, B, and C) showed different selectivity compared with some typical commercial columns, and it was validated by the separation of estrogen, ginsenoside, alkaloid samples. Based on the different selectivity between phenyl/tetrazole sulfoether bonded stationary phase and C18 columns, phenyl/tetrazole sulfoether bonded stationary phase also showed potential to construct a 2D reversed‐phase liquid chromatography system with C18. And it was verified by the separation of corydalis tuber and curcuma zedoary extracts.     

Homochiral metal–organic framework used as a stationary phase for high‐performance liquid chromatography

Metal–organic frameworks are promising porous materials. Chiral metal–organic frameworks have attracted considerable attention in controlling enantioselectivity. In this study, a homochiral metal–organic framework [Co₂(D‐cam)₂(TMDPy)] (D‐cam = d ‐camphorates, TMDPy = 4,4′‐trimethylenedipyridine) with a non‐interpenetrating primitive cubic net has been used as a chiral stationary phase in high‐performance liquid chromatography. It has allowed the successful separation of six positional isomers and six chiral compounds. The good selectivity and baseline separation, or at least 60% valley separation, confirmed its excellent molecular recognition characteristics. The relative standard deviations for the retention time of run‐to‐run and column‐to‐column were less than 1.8 and 3.1%, respectively. These results demonstrate that [Co₂(D‐cam)₂(TMDPy)] may represent a promising chiral stationary phase for use in high‐performance liquid chromatography.     

Dicationic imidazolium ionic liquid modified silica as a novel reversed‐phase/anion‐exchange mixed‐mode stationary phase for high‐performance liquid chromatography

A dicationic imidazolium ionic liquid modified silica stationary phase was prepared and evaluated by reversed‐phase/anion‐exchange mixed‐mode chromatography. Model compounds (polycyclic aromatic hydrocarbons and anilines) were separated well on the column by reversed‐phase chromatography; inorganic anions (bromate, bromide, nitrate, iodide, and thiocyanate), and organic anions (p‐aminobenzoic acid, p‐anilinesulfonic acid, sodium benzoate, pathalic acid, and salicylic acid) were also separated individually by anion‐exchange chromatography. Based on the multiple sites of the stationary phase, the column could separate 14 solutes containing the above series of analytes in one run. The dicationic imidazolium ionic liquid modified silica can interact with hydrophobic analytes by the hydrophobic C₆ chain; it can enhance selectivity to aromatic compounds by imidazolium groups; and it also provided anion‐exchange and electrostatic interactions with ionic solutes. Compared with a monocationic ionic liquid functionalized stationary phase, the new stationary phase represented enhanced selectivity owing to more interaction sites.     

Aqueous solution ofN-methylmorpholineN-oxide as a stationary liquid phase in steam chromatography

The retention of more than 70 voltatile organic compounds of different classes was studied by steam chromatography using aqueous solutions ofN-methylmorpholineN-oxide as the stationary liquid phase (SLP). The effects of temperature and composition of the mobile phase on the retention factors (k) for polar and nonpolar sorbates were elucidated. An unusual order of elution of aliphatic alcohols was noted, namely,tert-butyl alcohol <sec-butyl alcohol < isopentyl alcohol <isobutyl alcohol<isopropyl alcohol <n-pentyl alcohol <n-butyl alcohol <n-propyl alcohol <ethanol <methanol. The retention of cyclohexanol was longer than those of benzyl alcohol andn-hexyl alcohol. Nitrogen-containing compounds were selectively separated on the water-organic SLP studied. For example, the retention of aniline was much longer than those of its derivatives,N,N-dimethylaniline andN,N-diethylaniline, having higher boiling points. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1077–1084, June, 2000.     

Liquid Chromatography with mass spectrometry analysis of mycotoxins in food samples using silica hydride based stationary phases

Liquid chromatography with mass spectrometry analysis of selected food samples using silica hydride stationary phases allowed for the identification and quantification of common mycotoxins including aflatoxin B1, B2, G1, G2, ochratoxin A, and fumosinin B1. Phenyl and C₁₈ columns showed relatively similar selectivity based on hydrophobicity but the phenyl phase provides an additional mechanism, π–π interaction. The most hydrophobic of the analyzed compounds was more strongly retained on the C₁₈ column and also has fewer unsaturated sites, which limited the interaction with the phenyl phase. Bean, maize, rice, and wheat samples were harvested and stored under conditions conducive to fungal development, and all samples presented toxin contamination exceeding the maximum tolerable limits.     

Investigation of polar stationary phases for the separation of sympathomimetic drugs with nano-liquid chromatography in hydrophilic interaction liquid chromatography mode

In this study, the retention and selectivity of a mixture of basic polar drugs were investigated in hydrophilic interaction chromatographic conditions (HILIC) using nano-liquid chromatography (nano-LC). Six sympathomimetic drugs including ephedrine, norephedrine, synephrine, epinephrine, norepinephrine and norphenylephrine were separated by changing experimental parameters such as stationary phase, acetonitrile (ACN) content, buffer pH and concentration, column temperature. Four polar stationary phases (i.e. cyano-, diol-, aminopropyl-silica and Luna HILIC, a cross-linked diol phase) were selected and packed into fused silica capillary columns of 100 μm internal diameter (i.d.). Among the four stationary phases investigated a complete separation of the all studied compounds was achieved with aminopropyl silica and Luna HILIC stationary phases only. Best chromatographic results were obtained employing a mobile phase composed by ACN/water (92/8, v/v) containing 10 mM ammonium formate buffer pH 3. The influence of the capillary temperature on the resolution of the polar basic drugs was investigated in the range between 10 and 50 °C. Linear correlation of ln k vs. 1/T was observed for all the columns; ΔH° values were negative with Luna HILIC and positive with aminopropyl- and diol-silica stationary phases, demonstrating that different mechanisms were involved in the separation.To compare the chromatographic performance of the different columns, Van Deemter curves were also investigated.     

Hydrophilic interaction chromatography: A promising alternative to reversed‐phase liquid chromatography systems for the purification of small protonated bases

The overloaded band profiles of the protonated species of propranolol and amitriptyline were recorded under acidic conditions on four classes of stationary phases including a conventional silica/organic hybrid material in reversed‐phase liquid chromatography mode (BEH‐C₁₈), an electrostatic repulsion reversed‐phase liquid chromatography C₁₈ column (BEH‐C₁₈+), a poly(styrene‐divinylbenzene) monolithic column, and a hydrophilic interaction chromatography stationary phase (underivatized BEH). The same amounts of protonated bases per unit volume of stationary phase were injected in each column (16, 47, and 141 μg/cm³). The performance of the propranolol/amitriptyline purification was assessed on the basis of the asymmetry of the recorded band profiles and on the selectivity factor achieved. The results show that the separation performed under reversed‐phase liquid chromatography like conditions (with BEH‐C₁₈, BEH‐C₁₈+, and polymer monolith materials) provide the largest selectivity factors due to the difference in the hydrophobic character of the two compounds. However, they also provide the most distorted overloaded band profiles due to a too small loading capacity. Remarkably, symmetric band profiles were observed with the hydrophilic interaction chromatography column. The larger loading capacity of the hydrophilic interaction chromatography column is due to the accumulation of the protonated bases into the diffuse water layer formed at the surface of the polar adsorbent. This work encourages purifying ionizable compounds on hydrophilic interaction chromatography columns rather than on reversed‐phase liquid chromatography columns.     

Survey and Trends in the Preparation of Chemically Bonded Silica Phases for Liquid Chromatographic Analysis

In order to increase chromatographic selectivity and to extend the analytical capability of reversed phase liquid chromatography (RP HPLC) many investigators have concentrated on the preparation of silica based column packings with chemically bonded phases (CBP). These phases have also been successfully used in sample preparation techniques, mainly in solid phase extraction (SPE). Although alkyl bonded phases (e.g., C₂, C₈, and C₁₈) are the most widely used packings in RP HPLC and SPE, various specific applications require CBPs with polar functional groups (e.g., -NH₂, -NO₂, -CN, and/or -OH). The solution of problems with separation of complicated chiral compounds was attempted by applying stationary phases with chiral selectors (e.g., cyclodextrins, Pirkle phases, crown ethers, etc.). On the other hand, packings with pseudo-membrane or liquid crystal properties have been utilized for the separation of various substances of natural origin. Porous silica is commonly used as a support in the preparation of CBPs. Its physico-chemical characteristics, such as: type and structure of siliceous matrix, porosity, type and concentration of silanol groups, as well as surface purity, strongly influence the density and structure of chemically bonded phases. Recognition of these properties is helpful in optimizing separation processes based on RP HPLC elution and/or extraction of substances with polar character.     

Steam chromatography of aliphatic and aromatic amines on packed columns with aqueous potassium hydroxide as the stationary liquid phase

Aqueous alkali was proposed as the stationary liquid phase (SLP) for separation of amines by steam chromatography. Characteristic features of retention of amines of various structures were studied. The retention of primary and secondary amines on aqueous potassium hydroxide as the SLP differs fundamentally from that observed with common organic SLP. Primary amines are eluted in the following order,n-pentylamine <n-butyl-amine <n-propylamine <n-hexylamine <n-octylamine for secondary amines, the following sequence was established; diethylamine < dibutylamine < dimethylamine. Higher-boiling tertiary amines containing ethyl andn-butyl radicals are eluted ahead of diamines containing the same radicals. Translated fromIzvestiya Akademii Nau. Seriya Khimicheskaya, No. 8 pp. 1507–1509, August, 1999.     

Tuning retention and selectivity in reversed-phase liquid chromatography by using functionalized multi-walled carbon nanotubes

Aim of this work was to explore the possibility of retention and selectivity tuning in reversed-phase liquid chromatography by means of chemically modified multi-walled carbon nanotubes (MWCNTs). These were synthesized by derivatizing pristine MWCNTs with amino-terminated alkyl chains containing polar embedded groups. A novel hybrid material based on functionalized MWCNTs (MWCNTs-R-NH₂) was prepared, characterized and tested. The idea was to design a mixed-mode separation medium basing its sorption properties on the peculiar characteristics of MWCNTs combined with the chemical interactions provided by the functional chains introduced on the nanotube skeleton. MWCNTs-R-NH₂ were easily grafted to silica microspheres by gamma radiation (using a ⁶⁰Co source) in the presence of polybutadiene as the linking agent. The composite was characterized by scanning electron microscopy (SEM) and Brunauer, Emmett and Teller (BET) analysis in terms of structural morphology, surface area and porosity. The MWCNTs-R-NH₂ sorbent was tested as stationary phase. The reversed-phase behaviour was first proved by analysis of alkylbenzenes, while the key role of CNT derivatization in addressing the selectivity/affinity towards the solutes was evidenced by testing three classes of analytes, viz. barbiturates, steroid hormones and alkaloids. These compounds, with different molecular structure and polarity, were here analysed for the first time on CNT-based LC stationary phases. The behaviour of the novel sorbent was compared in terms of retention capability and resolution with that observed using unmodified MWCNTs, pointing out the mixed-mode characteristics of the MWCNTs-R-NH₂ material. The same test mixtures were analysed also on a conventional mono-modal separation sorbent (C18) to highlight the particular behaviour of the (derivatized)MWCNTs-based stationary phases. The novel material showed better performance in separation of polar compounds, i.e. barbiturates and alkaloids, than the unmodified MWCNTs and than the C18 column. Results showed that MWCNT functionalization is powerful to modulate retention/selectivity in reversed-phase liquid chromatography.     

Tetra‐proline‐modified calix[4]arene‐bonded silica stationary phase for simultaneous reversed‐phase/hydrophilic interaction mixed‐mode chromatography

A new water‐soluble tetra‐proline‐modified calix[4]arene‐bonded silica stationary phase was prepared straightforwardly by an indirect method and characterized by elemental analysis, energy dispersive Spectrometry, solid‐state ¹³C NMR spectroscopy, Fourier‐transform infrared spectroscopy, and thermogravimetric analysis. Due to the simultaneous introduction of polar tetra‐proline and nonpolar calix[4]arene, the developed column possessing a double retention mode of reverse‐phase liquid chromatography and hydrophilic interaction liquid chromatography. A series of hydrophobic and hydrophilic test samples, including nucleosides and nucleotides, amines, monosubstituted benzenes, chiral compounds, and phenols, were used to evaluate the developed stationary phase. A rapid separation capability, high separation efficiency, and selectivity were achieved based on the multiple interactions between solutes and tetra‐proline‐modified calix[4]arene‐bonded silica stationary phase. Moreover, the developed stationary phase was further used to detect and separate hexamethylenetetramine in rice flour. All the results indicated the potential merits of the developed stationary phase for simultaneous separation of complex hydrophobic and hydrophilic samples with high selectivity.     

Preparation of a monolithic column with a mixed‐mode stationary phase of reversed‐phase/hydrophilic interaction for capillary liquid chromatography

A monolithic capillary column with a mixed‐mode stationary phase of reversed‐phase/hydrophilic interaction chromatography was prepared for capillary liquid chromatography. The monolith was created by an in‐situ copolymerization of a homemade monomer N,N‐dimethyl‐N‐acryloxyundecyl‐N‐(3‐sulfopropyl) ammonium betaine and a crosslinker pentaerythritol triacrylate in a binary porogen agent consisting of methanol and isopropanol. The functional monomer was designed to have a highly polar zwitterionic sulfobetaine terminal group and a hydrophobic long alkyl chain moiety. The composition of the polymerization solution was systematically optimized to permit the best column performance. The columns were evaluated by using acidic, basic, polar neutral analytes, as well as a set of alkylbenzenes and Triton X100. Very good separations were obtained on the column with the mixed‐mode stationary phase. It was demonstrated that the mixed‐mode stationary phase displayed typic dual retention mechanisms of reversed‐phase/hydrophilic interaction liquid chromatography depending on the content of acetonitrile in the mobile phase. The method for column preparation is reproducible.     

Effect of the Orientation of Amide Linkage Groups on the Enantioselectivity of Two Related Synthetic Polymeric Chiral Stationary Phases

Two new synthetic polymeric chiral stationary phases (CSPs) based on trans-(1S,2S)-cyclohexanedicarboxylic acid bis-4-vinylphenylamide (I) and trans-N,N′-(1R,2R)-cyclohexanediyl-bis-4-ethenylbenzamide (II) monomers were prepared and evaluated by normal phase high performance liquid chromatography (HPLC) and supercritical fluid chromatography (SFC). A variety of chiral compounds were separated on these two new CSPs. The different orientation of the amide groups in the two CSPs resulted in a striking difference in the enantioselectivity properties of these two CSPs. Their differences in enantioselectivity with HPLC and SFC were compared.     

Influence of a water vapor admixture in the carrier gas on capacity coefficients of polar organic compounds

The influence of a water vapor admixture in helium, nitrogen, and carbon dioxide on capacity coefficients of C₃−C₅ alcohols and pyridine during chromatography process in capillary columns with polar (PEG-20M) and nonpolar (SE-30) stationary phases was studied. The introduction of a water admixture into the carrier gas, increases the capacity coefficient of polar organic compounds on the capillary column with PEG-20M and has almost no effect on this value in the case of SE-30. The change in retention of polar organic compounds on the capillary column with the PEG-20M polar phase occurs due to a change in the properties of the stationary phase when it adsorbs water from the mobile phase. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 11, pp. 2258–2261, November, 1998.     

A novel pillar[3]trianglimine macrocycle with a deep cavity used as a chiral selector to prepare a chiral stationary phase by thiol-ene click reaction for enantioseparation in high-performance liquid chromatography

A chiral pillar[3]trianglimine (C₆₀H₇₂N₆O₆) with a deep cavity has been developed as a chiral selector and bonded to thiolated silica by thiol-ene click reaction to fabricate a novel chiral stationary phase for enantioseparation in high-performance liquid chromatography. The enantioseparation performance of the fabricated chiral stationary phase has been evaluated by separating various racemic compounds, including alcohols, esters, amines, ketones, amino acids, and epoxides, in both normal-phase and reversed-phase elution modes. In total, 14 and 17 racemates have been effectively separated in these two separation modes, respectively. In comparison with two widely used chiral columns (Chiralcel OD-H and Chiralpak AD-H), our novel chiral stationary phase offered good chiral separation complementarity, separating some of the tested racemates that could not be separated or were only partially separated on these two commercial columns. The influences of analyte mass, mobile phase composition, and column temperature on chiral separation have been investigated. Good repeatability, stability, and column-to-column reproducibility of the chiral stationary phase for enantioseparation have been observed. After the fabricated column had been eluted up to 400 times, the relative standard deviations (n = 5) of resolution (Rs) and retention time of the separated analytes were < 0.39% and < 0.20%, respectively. The relative standard deviations (n = 3) of Rs and retention time for column-to-column reproducibility were < 4.6% and < 5.2%, respectively. This study demonstrated that the new chiral stationary phase has great prospects for chiral separation in high-performance liquid chromatography.     

Chiral Resolution of the Enantiomers of New Aromatase Inhibitors by Liquid Chromatography on Amylose Stationary Phases

Analytical HPLC methods for derivatized amylose chiral stationary phases were developed for the direct enantioseparation of substituted [1-(imidazo-1-yl)-1-phenylmethyl)] benzothiazolinone and benzoxazolinone derivatives with one stereogenic center. These analogues of fadrozole constitute new potent nonsteroidal inhibitors of aromatase (P450 arom.). The separations were made using normal phase methodology with mobile phase consisting of n-hexane-alcohol (ethanol, 1-propanol or 2-propanol) in various proportions, and a silica-based amylose tris-3,5-dimethylphenylcarbamate (Chiralpak AD), or tris-(S)-1-phenylethylcarbamate (Chiralpak AS). The effects of concentration of various aliphatic alcohols in the mobile phase were studied. Baseline separation (R_s > 1.5) was easily obtained in all cases, ethanol being often the more interesting modifier. The effects of structural features of the solutes along with the temperature of the column on the discrimination between the enantiomers were examined for different mobile phase compositions.     

Characterization of High‐Pressure Liquid Chromatography Columns using Chromatographic Methods

Abstract

A great variety of columns for liquid chromatography (LC) are available in dimensions ranging from industrial scale to micro‐bore, nano‐bore, and capillary size, and on‐chip columns. The columns may be used in various liquid chromatography modes or in capillary electrochromatography, depending on the support materials and stationary phase chemistry. Every year many new column types are introduced on the market, with improved selectivity and efficiency, long lifetime, and mobile phase compatibility, intended for general use, for liquid chromatography/mass spectrometry (LC/MS) applications, proteomic research, or for the analysis of other specific sample types. Considerable improvement in pH, high‐temperature, and high‐pressure stability of new column types, together with advances in the instrumentation, enabled introduction of capillary, high‐temperature, and ultra‐high‐pressure HPLC into routine practice. Even though reversed‐phase mode is still by the most widely used in contemporary LC, applications of other separation modes (such as ion, normal‐phase, or high‐interaction liquid chromatography (HILC)) have become more frequent recently, because of unique separation selectivity for certain sample types.

Characterization of column quality is not a simple task, because a number of factors should be taken into account, that affect the selectivity, efficiency and resolution of sample separation and the reproducibility of chromatographic data. These include the type of the support, the arrangement and density of the stationary phase on the adsorbent surface, the homogeneity of the chromatographic bed, etc. Various physicochemical techniques are used for characterization of the properties of column packings however, most of them are suitable for bulk materials only and cannot be directly applied for commercial columns without damaging them. Not to destroy the columns, often precious and expensive, practicing chromatographers can apply chromatographic methods to characterize columns and evaluate their analytical suitability under real‐life conditions, where the intermolecular interactions between the analytes, the stationary phase, and the mobile phases affect the retention. The present review reports various chromatographic tests and strategies available for column evaluation.     

Steam chromatography with water—salt and water—acid inorganic phases

Th peculiarities of steam chromatography with water-salt and water-acid stationary liquid phases have been studied. The effects of the nature of the salt, its concentration in the stationary liquid phase, and the temperature of the column on retention values have been studied using C₁-C₈ primary nonbranched alcohols as an example. The advantages and disadvantages of steam chromatography with aqueous electrolyte phases arid challenges for the development of' this method are discussedTranslated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 7, pp. 1733–1739, July, 1996.