A Simple Fabrication Method for Three‐Dimensional Gold Nanoparticle Electrodes and Their Application to the Study of the Direct Electrochemistry of Cytochrome c

A simple method for constructing gold nanoparticle‐modified electrodes with three‐dimensional nanostructures is demonstrated. The electrodes were prepared by casting citrate‐reduced AuNPs onto polycrystalline gold electrodes. The resultant electrodes had a large surface area‐to‐volume ratio, adequate for high protein loading and conferring high stability. The gold nanoparticle electrodes were covered with a self‐assembled monolayer of 11‐mercaptoundecanoic acid for electrostatic immobilization of cytochrome c (cyt c). At the electrode, direct, reversible electron transfer from cyt c was observed with remarkable stability. Moreover, an extremely high surface coverage of electrochemically active cyt c, 167 fully packed monolayers, was obtained through use of the electrode.     

Morphology-dependent electrochemistry and electrocatalytical activity of cytochrome c

The morphology-dependent electrochemistry and electrocatalytical activity of cytochrome c (cyt. c) were investigated at pyramidal, rodlike, and spherical gold nanostructures directly electrodeposited onto sputtered gold surfaces. Direct, reversible electron transfer of cyt. c, for the first time, was realized at nanorod-like and nanopyramidal gold surfaces without any mediators or promoters, while no redox reaction was observed at the nanospherical gold electrode. The electrochemical properties of cyt. c vary with the shape of gold nanostructures with respect to the reversibility of electrode reactions, kinetic parameters, the formal potentials (E0'), and charge-transport resistance (Rct), suggesting shape-dependent mechanisms for the electrode reactions of cyt. c. The experimental results manifest that cyt. c was stably immobilized on the nanostructured gold electrodes with different conformational changes of the heme microenvironment. Consequently, not only the electroactivity, but also the inherent biological activity of the immobilized cyt. c strongly depended on the shape of the electrode surfaces. The facilitated electron transfer combined with the intrinsic catalytical activity of cyt. c substantially constructed a third-generation H2O2 biosensor with high selectivity, quick response time, large linear range, and good sensitivity. The electrocatalytical activity of the immobilized cyt. c toward H2O2 was also found to be morphology dependent, and the linear range of H2O2 detection could be tuned by means of employing the nanostructured gold surfaces with different shapes.     

pH-Induced changes in adsorbed cytochrome c. voltammetric and surface-enhanced resonance Raman characterization performed simultaneously at chemically modified silver electrodes

The influence of pH on the redox properties of cytochrome c (cyt c) adsorbed on roughened silver electrodes chemically modified with a self-assembled monolayer (SAM) of 11-mercapto-1-undecanoic acid (MUA) was studied with voltammetric techniques in combination with surface-enhanced resonance Raman scattering (SERRS). The experiments were performed simultaneously on the same electrode sample in a homemade spectroelectrochemical cell suitable for such applications. At pH 7.0 cyt c was found in its native state; at higher pH values (ranging from 8.0 to 9.0) the redox properties of the adsorbed protein varied considerably, featuring a redox behavior which does not resemble the one reported for the alkaline transition. Our results instead indicate the presence of an electrochemically inactive 6cLS species immobilized on MUA at pH 9.0. The pH-induced conformational changes observed for cyt c immobilized on the SAM of MUA were found to be repeatable and chemically reversible, meaning that the recovery of the electrochemical signal due to the native protein occurred instantaneously (on the second time scale) when the electrode was switched back to pH 7.0. The pH-induced changes observed were attributed to a conformational change involving a heme reorientation with respect to the electrode surface.     

Silver residues as a possible key to a remarkable oxidative catalytic activity of nanoporous gold

Recently, several forms of unsupported gold were shown to display a remarkable activity to catalyze oxidation reactions. Experimental evidence points to the crucial role of residual silver present in very small concentrations in these novel catalysts. We focus on the catalytic properties of nanoporous gold (np-Au) foams probed via CO and oxygen adsorption/co-adsorption. Experimental results are analyzed using theoretical models represented by the flat Au(111) and the kinked Au(321) slabs with Ag impurities. We show that Ag atoms incorporated into gold surfaces can facilitate the adsorption and dissociation of molecular oxygen on them. CO adsorbed on top of 6-fold coordinated Au atoms can in turn be stabilized by co-adsorbed atomic oxygen by up to 0.2 eV with respect to the clean unsubstituted gold surface. Our experiments suggest a linking of that most strongly bound CO adsorption state to the catalytic activity of np-Au. Thus, our results shed light on the role of silver admixtures in the striking catalytic activity of unsupported gold nanostructures.     

Self-assembly of S-layer-enveloped cytochrome c polyelectrolyte multilayers

We report a study of the electrostatic layer-by-layer self-assembly of electroactive polyelectrolyte multilayers incorporating the redox protein cytochrome c (cyt c) combined with recrystallization of the bacterial cell wall surface layer from Bacillus sphaericus CCM 2177 SbpA (S-layer). The polyelectrolyte multilayer assembly was prepared on flat gold electrodes with a nanometer-scale roughness that allowed monitoring of the film formation throughout all the assembly stages by atomic force microscopy measurements in liquid with respect to topography and forces. The deposition of alternating layers of sulfonated polyaniline and cyt c was carried out by adsorption from the corresponding solutions on a cyt c monolayer electrode. The electroactivity of cyt c within the assembly was confirmed by cyclic voltammetry. We showed that the surface properties of the electrode terminating layer change after each adsorption step accordingly. We also found that S-layer recrystallization on the top of the multilayer film was feasible while electroactivity of cyt c within a polyelectrolyte matrix was partially maintained. This approach offers a new strategy to design a biocompatible and permselective outer envelope of a polyelectrolyte multilayer, promising sensor applications.     

Electorchemical Studies of Cytochrome c on Electodes Modified by Single—Wall Carbon Naotubes

Single-wall carbon nanotubes(SWNTs) modified gold electrodes were prepared by using two different methods.The electrochemical behavior of cytochrome c on the modified gold electrodes was investigated.The first kind of SWNT-modified electrode (noted as SWNT/Au electrode)was prepared by the adsorption of carboxylterminated SWNTs from DMF dispersion on the gold electrode.The oxidatively processed SWNT tips were covalently modified by coupling with amines (AET) to form amide linkage.Via Au-S chemical bonding,the self-assembled monolayer of thiol-unctionalized nanotubes on gold surface was fabricated so as to prepare the others SWNT-modified electrode (noted as SWNT/AET/Au electrode).It was shown from cyclic voltammetry cxperiments that cytochrome c exhibited direct electrochemical responses on the both electrodes, but only the current of controlled diffusion existed on the SWNT/Au electrode while both the currents of controlled diffusion and adsorption of cytochrome c occurred on the SWNT/AET/Au electrode.Photoelastic Modulation Infared Reflection Absorpthion Spectroscopy (PEM-IRRAS) and Quartz Crystal Microbalance (QCM) were employed to verify the adsorption of SWNTs on the gold electrodes.The results proved that SWNTs could enhance the direct electron transfer proecss between the electrodes and redox proteins.     

Functionalization of gold electrode surface with heterobifunctional poly(ethylene oxide)s having both mercapto and aldehyde groups

We synthesized heterobifunctional poly(ethylene oxide) (PEO) (α‐formyl‐ω‐mercapto‐PEO; CHO‐PEO₄₀₀‐SH, average molecular weight of PEO part being 400), which had both an aldehyde group as a binding site with amino group of protein and a mercapto group for gold electrode surface. The CHO‐PEO₄₀₀‐SH was adsorbed on a gold electrode surface and cytochrome c (cyt.c) was fixed on this modified electrode. The redox response of covalently immobilized cyt.c was observed on the cyclic voltammetry measurement, showing that CHO‐PEO₄₀₀‐SH can be used as a linker to fix cyt.c on an electrode. Another type of heterobifunctional PEO (α‐formyl‐ω‐(2‐pyridyldithio)‐PEO; CHO‐PEO₃₀₀‐SS‐Py), which had an aldehyde group and a 2‐pyridinethiol (2‐Py) through disulfide bond, was synthesized to form co‐adsorbed monolayer of PEO chain and 2‐Py on an electrode surface. It was expected, due to the spacer with shorter PEO chain and lower surface density, that better redox response of the fixed cyt.c was obtained. However, the redox response of fixed cyt.c was not detected on the CHO‐PEO₃₀₀‐SS‐Py modified gold electrode. Instead, this heterobifunctional PEO was found to function as a good promoter for cyt.c dissolved in phosphate buffer solution. Copyright © 2003 John Wiley & Sons, Ltd.     

Reversible Electrochemistry of Cytochrome c on Recompressed,Binderless Exfoliated Graphite Electrodes

The direct electrochemistry of cytochrome c (cyt‐c) has been investigated on exfoliated graphite (EG) electrodes. The as‐polished and roughened (using SiC emery sheet) EG surfaces are inactive for the direct electron transfer. However, when the EG electrode was sonicated before the experiment, a pair of redox waves were obtained for freely diffusing cyt‐c in the solution phase. The formal potential was found to be 0.01 V (vs. SCE) in 0.1 M phosphate buffer at a pH of 7.1. The electrochemical response for the adsorbed cyt‐c on sonicated EG electrodes, which is shown to have carbonyl functional groups on its surface, shows nearly reversible voltammograms in the same electrolyte. However, the formal potential in the adsorbed state is more negative than that observed for the solution phase cyt‐c. A structure based on an open heme conformation proposed by Hildebrandt and Stockburger is probably present on the EG surface. It is suggested that the electrochemistry at the EG electrode is essentially governed by favourable electrostatic interactions.     

Electrochemical sensor for detection of p-nitrophenol based on nanoporous gold

Nanoporous gold (NPG) with uniform pore sizes and ligaments was prepared by a simple dealloying method. The as-prepared NPG samples were used as the working electrodes to investigate the redox behavior of p-nitrophenol (p-NP) by cyclic voltammetry (CV). Quite different from the voltammetric behavior of polycrystalline gold electrode, the CV profiles of NPG display a pair of nearly symmetric redox waves which are ascribed to the reaction of 4-(hydroxyamino)phenol/4-nitrosophenol couple. It is interesting that this pair of redox waves are hardly affected by the isomers of p-NP; and moreover, their peak areas are linear with the concentration of p-NP in the range from 0.25 to 10 mg dm^?3. Because of high sensitivity and good selectivity, NPG is expected to act as a promising electrochemical sensor material for detecting trace p-NP in wastewaters.     

Gold and Silver Micro‐Wire Electrodes for Trace Analysis of Metals

Micro‐wire electrodes were made from gold and silver wires (diameter: 25 μm; length: 3–21 mm) and sealed in a polyethylene holder; micro‐disk electrodes were made from the same wires and polished. The gold electrodes were electrochemically coated with mercury before use; the silver wires were used without coating. Comparative measurements demonstrated that the micro‐wire electrodes had much higher sensitivity, and a much (10–100×) lower limit of detection, than micro‐disk electrodes, and the sensitivity increased linearly with the area and length of the electrodes. Using a gold micro‐wire electrode of 21 mm and a deposition time of 300 s the limit of detection was 0.07 nM Pb in seawater of natural pH, compared to a limit of detection of 10 nM Pb (more than 100×greater) using a gold micro‐disk electrode of the same diameter. Using the silver micro‐wire electrode the limit of detection of lead was improved by a factor of 10 to 0.2 nM in acidified seawater. It is expected that the improved sensitivity of micro‐wire electrodes will lead to successful in situ detection of metals in natural waters.     

Electrochemical Parameters of Phenoxazine Derivatives in Solution and at Monolayer‐Modified Gold Electrodes

Electrochemical properties of β‐(10‐phenoxazinyl) propylamine (APPX) and β‐(10‐phenoxazinyl) propionic acid (PPX) have been studied in solution, and in immobilized state on gold electrodes modified with monolayers of cystamine and mercaptoundecanoic acid. A reversible diffusion‐controlled process of APPX and PPX was observed at a bare gold electrode. The electrochemical conversion of both compounds at modified gold electrodes was a quasi‐reversible diffusion‐controlled process. The redox potential of immobilized APPX (443 mV) was similar to the potential in solution, while the value of the immobilized PPX was 131 mV higher than in solution. The immobilized mediators were electrocatalytically active in the fungal peroxidase‐catalyzed hydrogen peroxide reduction.     

Ultrasensitive electrochemiluminescence immunoassay for tumor marker detection using functionalized Ru-silica@nanoporous gold composite as labels

In this work, we reported a simple and sensitive sandwich-type electrochemiluminescence (ECL) immunosensor for carcinoembryonic antigen (CEA) on a gold nanoparticles (AuNPs) modified glassy carbon electrode (GCE). The Ru-silica (Ru(bpy)(3)(2+)-doped silica) capped nanoporous gold (NPG) (Ru-silica@NPG) composite was used as an excellent label with amplification techniques. The NPG was prepared with a simple dealloying strategy, by which silver was dissolved from silver/gold alloys in nitric acid. The primary antibody was immobilized on the AuNPs modified electrode through l-cysteine and glutaraldehyde, and then the antigen and the functionalized Ru-silica@NPG composite labeled secondary antibody were conjugated successively to form a sandwich-type immunocomplex through the specific interaction. The concentrations of CEA were obtained in the range from 1 pg mL(-1) to 10 ng mL(-1) with a detection limit of 0.8 pg mL(-1). The as-proposed ECL immunosensor has the advantages of high sensitivity, specificity and stability and could become a promising technique for tumor marker detection.     

Growth and characterisation of diffusion junctions between paired gold electrodes: diffusion effects in generator–collector mode

A diffusion junction between two paired gold electrodes is created in a bipotentiostatic electro-deposition process. Gold metal is deposited simultaneously on two adjacent disc electrodes (100 μm diameter, approximately 125 μm separation) until short-circuit conditions trigger the end point of the electro-deposition. Symmetric gold junctions with typically 5 μm average inter-electrode gap size, 140 μm gap length, and approximately 18 μm junction depth are obtained. These paired gold electrodes are employed in generator–collector mode to give well-defined steady-state feedback currents even for extremely low concentrations of analyte (sub-μM) and without any contributions from capacitive charging. Four redox systems are investigated spanning a wide range of diffusion coefficients: (1) the one-electron oxidation of iodide to iodine, (2) the two-electron oxidation of hydroquinone to benzoquinone, (3) the two-electron reduction of alizarin red S, and (4) the one-electron oxidation of the redox protein cytochrome c. Consistent results for these redox systems suggest that (1) the junction zone between the two electrodes is dominating the behaviour of the electrode in particular for the slower diffusing systems and (2) the paired gold electrode junction can be calibrated and employed for electroanalysis at very low concentrations and for a wider range of analytically relevant redox systems. Dedicated to Professor Keith B. Oldham, on the occasion of his 80th birthday     

Nanohybrid Materials Consisting of Poly[(3‐aminobenzoic acid)‐co‐(3‐aminobenzenesulfonic acid)‐co‐aniline] and Multiwalled Carbon Nanotubes for Immobilization of Redox Active Cytochrome c

The development of a new surface architecture for the efficient direct electron transfer of positively charged redox proteins is presented. For this reason different kinds of polyaniline terpolymers consisting of aminobenzoic acid (AB), aminobenzenesulfonic acid (ABS) and aniline (A) with different monomer ratios were synthesized. The P(AB‐ABS‐A) were grafted to the surface of multiwalled carbon nanotubes (MWCNTs). FTIR measurements prove the covalent binding to the carboxylic groups of the MWCNTs while conductivity tests show an increase in the conductivity of the nanohybrid in comparison to the polymers. The [MWCNT‐P(AB‐ABS‐A)] nanohybrids were used for the immobilization of redox active cytochrome c (cyt.c). The positively charged protein can electrostatically interact with the negatively charged nanohybrid. Cyclic voltammetry (CV) shows an increase in the protein loading on [MWCNT‐P(AB‐ABS‐A)] coupled to cysteamine modified gold electrodes in comparison to non‐grafted MWCNTs. A further increase in the sulfonation degree of P(AB‐ABS‐A) leads to an enhanced current output of the modified electrodes. The redox activity of the polymer decreases after the immobilization of the cyt.c on the nanohybrid. For the first time polymers covalently grafted to the surface of MWCNTs are used in a biosensor.     

The influence of promoter and of electrode material on the cyclic voltammetry of Pisum sativum plastocyanin

The reversible cyclic voltammetry of pea plastocyanin (Pisum sativum) was studied with a wide range of electrodes: edge-oriented pyrolytic graphite (PGE), glassy carbon (GCE), gold (Au) and platinum (Pt) electrodes. Plastocyanin was coated onto the electrode surface by exploiting the electrostatic interaction between the negatively charged protein and a wide range of positively charged promoters. The effect of the redox response with an extended range of promoters, including poly-L-lysine, polymyxin B, neomycin, tobramycin, geneticin, spermine and spermidine, were included in this study. The resulting cyclic voltammograms reveal that the observed midpoint potential for plastocyanin can be shifted significantly depending on the choice of promoter. The stability of the negatively charged plastocyanin-promoter layer on an electrode was gauged by the rate of bulk diffusion of the protein from the immobilised film into the solution. Reversible cyclic voltammograms were obtained using edge-oriented pyrolytic graphite (PGE) and glassy carbon electrodes (GCE) with all promoters; however, platinum and gold electrodes were unable to sustain a defined redox response. The combination of pyrolytic graphite electrode/poly-L-lysine/plastocyanin was found to be the most stable combination, with a redox response which remained well defined in solution for more than 1 h at pH 7.0. The midpoint potentials obtained in this manner differed between the two graphite electrodes PGE and GCE using poly-L-lysine as the promoter. This effect was in addition to the expected pH dependence of the midpoint potential for plastocyanin and the results indicated that the pK(a) for plastocyanin on PGE was 4.94 compared to that on GCE of 4.66. It is concluded that both the electrode material and the nature of the promoter can influence the position of the redox potentials for proteins measured in vitro. This study extends the range of biogenic promoters used in combination with electrode materials. Thus, we can begin to develop a more comprehensive understanding of electrode-protein interactions and draw conclusions as to metalloprotein function, in vivo. To support these studies, we have sought information as to the nature of the electrode/promoter/protein interaction using scanning tunneling microscopy (STM) to study both the promoter and the plastocyanin protein on a gold surface.     

Electroactive dipyrromethene-Cu(II) self-assembled monolayers: complexation reaction on the surface of gold electrodes

In the work presented, thiol- and COOH-terminated dipyrromethene derivatives have been applied for gold electrode modification. Dipyrromethene deposited onto a solid support, after binding Cu2+, can act as a redox active monolayer. The complexation of Cu(II) ions has been performed on the surface of gold electrodes modified with dipyrromethene. The characterization of dipyrromethene-Cu(II) self-assembled monolayers (SAMs) has been done by cyclic voltammetry (CV), wettability contact angle measurements, and atomic force microscopy (AFM). The new electroactive monolayer could be applied for the immobilization of proteins and ssDNA or for electrochemical anion sensing without redox markers in the solution.     

氯离子伏安刻蚀制备高活性多孔银膜及其对三氯乙酸的电化学检测（英文）

采用无机阴离子促进的伏安刻蚀技术在银线表面制备高活性多孔银膜。优选的氯离子在伏安条件下通过微反应刻蚀,促使银丝表面形成自支撑的多孔通道。当在银丝电极上施加连续的正电位后,银电极表面在氯离子作用下快速形成AgCl膜,经施加的电位反向,在电化学还原作用下氯离子剥离,AgCl膜自发转化为自支撑的多孔银膜。研究表明,制备的多孔银膜(p-Ag film)对三氯乙酸具有较高的电催化活性,与原始银丝(r-Ag wire)相比,电化学活性表面积和电催化性能分别提高了174和3.7倍。将其用于三氯乙酸的电化学检测时,在浓度为0.1~518.1μmol·L-1范围内,制备的多孔银膜电极的最低检测限可达70 nmol·L-1(拟合相关性系数R2=0.9983)。     

Development of impedimetric and optical calcium biosensor by using modified gold electrode with porcine S100A12 protein

We describe the development of a label free method to analyze the interactions between Ca(2+) and the porcine S100A12 protein immobilized on polyvinyl butyral (PVB). The modified gold electrodes were characterized using cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), scanning electron microscopy (SEM) and surface plasmon resonance (SPR) techniques. SEM analyses of PVB and PVB-S100A12 showed a heterogeneous distribution of PVB spherules on gold surface. EIS and CV measurements have shown that redox probe reactions on the modified gold electrodes were partially blocked due the adsorption of PVB-S100A12, and confirm the existence of a positive response of the immobilized S100A12 to the presence of calcium ions. The biosensor exhibited a wide linear response to Ca(2+) concentrations ranging from 12.5 to 200mM. The PVB-S100A12 seems to be bound to the gold electrode surface by physical adsorption; we observed an increase of 1184.32m° in the SPR angle after the adsorption of the protein on the PVB surface (in an indication that 9.84ng of S100A12 are adsorbed per mm(2) of the Au-PVB electrode), followed by a further increase of 581.66m° after attachment of the Ca(2+) ions. In addition, no SPR response is obtained for non-specific ions. These studies might be useful as a platform for the design of new reusable and sensitive biosensing devices that could find use in the clinical applications.     

A Self‐contained Two‐electrode Nanosensor for Electrochemical Analysis in Aqueous Microenvironments

We describe the development, fabrication, and characterization of a novel two‐electrode nanosensor contained within the tip of a needle‐like probe. This sensor consists of two, vertically aligned, carbon structures which function as individual electrodes. One of the carbon structures was modified by silver electrodeposition and chlorination to enable it to function as a pseudo‐reference electrode. Performance of this pseudo‐reference electrode was found to be comparable to that of commercially available Ag/AgCl reference electrodes. The unmodified carbon structure was employed as a working electrode versus the silver‐plated carbon structure to form a two‐electrode sensor capable of characterizing redox‐active analytes. The nanosensor was demonstrated to be capable of electrochemically characterizing the redox behavior of para‐aminophenol (PAP) in both bulk solutions and microenvironments. PAP was also measured in cell lysate to show that the nanosensor can detect small concentrations of analyte in heterogenous environments. As the working and reference electrodes are contained within a single nanoprobe, there was no requirement to position external electrodes within the electrochemical cell enabling analysis within very small domains. Due to the low‐cost manufacturing process, this nanoprobe has the potential to become a unique and widely accessible tool for the electrochemical characterization of microenvironments.     

Disposable Gold Electrodes with Reproducible Area Using Recordable CDs and Toner Masks

The fabrication and characterization of very cheap disposable gold disk electrodes with reproducible area is reported. The innovation of the proposed procedure is the use of toner masks to define reproducible areas on uniform gold surfaces obtained from recordable compact disks (CD‐R). Toner masks are drawn in a laser printer and heat transferred to gold surfaces, defining exactly the electrodes area. The electrochemical behavior of these disposable electrodes was investigated by cyclic voltammetry in Fe(CN)₆^4? solutions. The relative standard deviation for signals obtained from 10 different gold electrodes was below 1 %. The size of the disk electrodes can be easily controlled, as attested by voltammetric responses recorded by using electrodes with radii varying from 0.5 to 3.0 mm. The advantages of using this kind of electrode for analytical measurements of substances that strongly adsorb on the electrode surface such as cysteine are also addressed.