Profile of enzyme production by trichoderma reesei grown on corn fiber fractions

Corn fiber is the fibrous by-product of wet-mill corn processing. It typically consists of about 20% starch, 14% cellulose, and 30% hemicellulose in the form of arabinoxylan. Crude corn fiber (CCF) was fractionated into de-starched corn fiber (DSCF), corn fiber with cellulose (CFC) enriched, and corn fiber arabinoxylan (CFAX), and these fractions were evaluated as substrates for enzyme production by Trichoderma reesei. T. reesei QM9414 and Rut C-30 grew on CCF, DSCF, CFC, or CFAX and secreted a number of hydrolytic enzymes. The enzymes displayed synergism with commercial cellulases for corn fiber hydrolysis. Mention of trade names or commercial products in this article is solely for the purpose of providing specific information and does not imply recommendation or endorsement by the U.S. Department of Agriculture.     

The BTL2 process of biomass utilization entrained-flow gasification of pyrolyzed biomass slurries

Forschungszentrum Karlsruhe has developed a concept for the utilization of cereal straw and other thin-walled biomass with high ash content. The concept consists of a regional step (drying, chopping, flash-pyrolysis, and mixing) and a central one (pressurized entrained-flow gasification, gas cleaning, synthesis of fuel, and production of byproducts). The purpose of the regional plant is to prepare the biomass by minimizing its volume and producing a stable and safe storage and transport form. In the central gasifier, the pyrolysis products are converted into syngas. The syngas is tar-free and can be used for Fischer-Tropsch synthesis after gas cleaning.     

Ammonia Fiber Expansion (AFEX) Pretreatment,Enzymatic Hydrolysis,and Fermentation on Empty Palm Fruit Bunch Fiber (EPFBF) for Cellulosic Ethanol Production

Empty palm fruit bunch fiber (EPFBF), a readily available cellulosic biomass from palm processing facilities, is investigated as a potential carbohydrate source for cellulosic ethanol production. This feedstock was pretreated using ammonia fiber expansion (AFEX) and enzymatically hydrolyzed. The best tested AFEX conditions were at 135 °C, 45 min retention time, water to dry biomass loading of 1:1 (weight ratio), and ammonia to dry biomass loading of 1:1 (weight ratio). The particle size of the pretreated biomass was reduced post-AFEX. The optimized enzyme formulation consists of Accellerase (84 μL/g biomass), Multifect Xylanase (31 μL/g biomass), and Multifect Pectinase (24 μL/g biomass). This mixture achieved close to 90% of the total maximum yield within 72 h of enzymatic hydrolysis. Fermentation on the water extract of this biomass affirms that nutrients solely from the pretreated EPFBF can support yeast growth for complete glucose fermentation. These results suggest that AFEX-treated EPFBF can be used for cellulosic biofuels production because biomass recalcitrance has been overcome without reducing the fermentability of the pretreated materials.     

Synthesis of poly(sorbitan methacrylate) hydrogel by free-radical polymerization

Hydrogels are materials with the ability to swell in water through the retention of significant fractions of water within their structures. Owing to their relatively high degree of biocompatibility, hydrogels have been utilized in a host of biomedical applications. In an attempt to determine the optimum conditions for hydrogel synthesis by the free-radical polymerization of sorbitan methacrylate (SMA), the hydrogel used in this study was well polymerized under the following conditions: 50% (w/v) SMA as monomer, 1% (w/w) alpha, alpha'-azo-bis(isobutyro-nitrile) as thermal initiator, and 1% (w/w) ethylene glycol dimethacrylate as cross-liking agent. Under these conditions, the moisture content of the polymerized SMA hydrogel was higher than in the other conditions. Moreover, the moisture content of the poly(SMA) hydrogel was also found to be higher than that of the poly(methyl methacrylate [MMA]) hydrogel. When the Fourier transform-infrared spectrum of poly(SMA) hydrogel was compared with that of poly(MMA) hydrogel, we noted a band at 1735-1730/cm, which did not appear in the Fourier transform-infrared spectrum of poly(MMA). The surface of the poly(SMA) hydrogel was visualized through scanning electron microscopy, and was uniform and clear in appearance.     

Yield,Characterization, and Possible Exploitation of Cannabis Sativa L. Roots Grown under Aeroponics Cultivation

Cannabis sativa L. has been used for a long time to obtain food, fiber, and as a medicinal and psychoactive plant. Today, the nutraceutical potential of C. sativa is being increasingly reappraised; however, C. sativa roots remain poorly studied, despite citations in the scientific literature. In this direction, we identified and quantified the presence of valuable bioactives (namely, β-sitosterol, stigmasterol, campesterol, friedelin, and epi-friedelanol) in the root extracts of C. sativa, a finding which might pave the way to the exploitation of the therapeutic potential of all parts of the C. sativa plant. To facilitate root harvesting and processing, aeroponic (AP) and aeroponic-elicited cultures (AEP) were established and compared to soil-cultivated plants (SP). Interestingly, considerably increased plant growth—particularly of the roots—and a significant increase (up to 20-fold in the case of β-sitosterol) in the total content of the aforementioned roots’ bioactive molecules were observed in AP and AEP. In conclusion, aeroponics, an easy, standardized, contaminant-free cultivation technique, facilitates the harvesting/processing of roots along with a greater production of their secondary bioactive metabolites, which could be utilized in the formulation of health-promoting and health-care products.     

High-resolution Thermogravimetric Analysis For Rapid Characterization of Biomass Composition and Selection of Shrub Willow Varieties

The cultivation of shrub willow (Salix spp.) bioenergy crops is being commercialized in North America, as it has been in Europe for many years. Considering the high genetic diversity and ease of hybridization, there is great potential for genetic improvement of shrub willow through traditional breeding. The State University of New York—College of Environmental Science and Forestry has an extensive breeding program for the genetic improvement of shrub willow for biomass production and for other environmental applications. Since 1998, breeding efforts have produced more than 200 families resulting in more than 5,000 progeny. The goal for this project was to utilize a rapid, low-cost method for the compositional analysis of willow biomass to aid in the selection of willow clones for improved conversion efficiency. A select group of willow clones was analyzed using high-resolution thermogravimetric analysis (HR-TGA), and significant differences in biomass composition were observed. Differences among and within families produced through controlled pollinations were observed, as well as differences by age at time of sampling. These results suggest that HR-TGA has a great promise as a tool for rapid biomass characterization.     

Bildung von α-Mannosidase durch Arthrobacter

The production of yeast cell wall mannan degrading -mannosidase was studied in shake flask experiments as well as in a highly instrumented, computer-coupled bioreactor. The enzyme is predominantly excreted into the culture liquid upon submerged cultivation on yeast mannan. Only low activities were detected with mannose or glucose as carbon source whereas the enzyme formation was totally repressed by glycerol. The amount of enzyme produced is proportional to the microbial biomass formed.Carbon-unlimited cultivation on mannose, the primary product of enzymic digestion, resulted in a specific growth rate of 0.10h^–1, a specific oxygen uptake rate ·h and a respiratory quotient ofRQ=1.0. Addition of yeast mannan (0.5%) to nutrient-depleted bacterial cells resulted in an almost complete utilization of this substrate, with 55% of substrate carbon being converted to biomass and 37% to carbon dioxide. The yield coefficient on mannan wasY _x/s =0.51 (g/g). Enzyme formation started with a delay of 30–40 min and stopped with termination of growth. Due to the increased production of mannose by the action of the enzyme the specific growth rate increased from 0.05 to 0.10 h^–1, thus enabling computations of maintenance and yield coefficients for oxygen and carbon dioxide metabolism.

     

Microbial synthesis of chitinase in solid cultures and its potential as a biocontrol agent against phytopathogenic fungus Colletotrichum gloeosporioides

Antifungal activity of chitinase can be effectively utilized in biologic pest control strategies. Because solid-state cultivation has been termed a cost-effective means for fungal growth and metabolite production, chitinase production by Trichoderma harzianum was studied using wheat bran-based solid medium containing 1% colloidal chitin. Chitinase synthesis was found to be growth associated because maximum enzyme (5.4 U/g of dry substrate) and biomass production occurred at 72h. Substrate moisture had a critical impact on chitinase production; five grams of medium having an initial moisture content of 68.4% when incubated for 72 h increased the enzyme yield to 9.3 U/g of dry substrate. Optimization of colloidal chitin concentration showed that improvements in chitinase yield and maximum activity were attained with a 2% (w/w) concentration. Supplementation of additional nitrogen sources also influenced enzyme production, and the best yield was obtained with yeast extract. The effect of crude chitinase on hyphal morphology of the phytopathogenic fungus Collelotrichum gloeosporioides was swelling as well as lysis of hyphal wall, depending on the age of the mycelium. Studies of pH and thermal stability showed that crude culture filtrate was active over pH 4.0–6.0 and retained about 48.2% activity after 40 min of incubation at 40°C.     

Cannabinoids—Characteristics and Potential for Use in Food Production

Scientific demonstrations of the beneficial effects of non-psychoactive cannabinoids on the human body have increased the interest in foods containing hemp components. This review systematizes the latest discoveries relating to the characteristics of cannabinoids from Cannabis sativa L. var. sativa, it also presents a characterization of the mentioned plant. In this review, we present data on the opportunities and limitations of cannabinoids in food production. This article systematizes the data on the legal aspects, mainly the limits of Δ9-THC in food, the most popular analytical techniques (LC-MS and GC-MS) applied to assay cannabinoids in finished products, and the available data on the stability of cannabinoids during heating, storage, and access to light and oxygen. This may constitute a major challenge to their common use in food processing, as well as the potential formation of undesirable degradation products. Hemp-containing foods have great potential to become commercially popular among functional foods, provided that our understanding of cannabinoid stability in different food matrices and cannabinoid interactions with particular food ingredients are expanded. There remains a need for more data on the effects of technological processes and storage on cannabinoid degradation.     

Preparation,optimization and swelling study of carboxymethyl sago starch (CMSS)–acid hydrogel

In this study, sago starch was modified in order to enhance its physicochemical properties. Carboxymethylation was used to introduce a carboxymethyl group into a starch compound. The carboxymethyl sago starch (CMSS) was used to prepare smart hydrogel by adding acetic acid into the CMSS powder as the crosslinking agent. The degree of substitution of the CMSS obtained was 0.6410. The optimization was based on the gel content and degree of swelling of the hydrogel. In this research, four parameters were studied in order to optimize the formation of CMSS–acid hydrogel. The parameters were; CMSS concentration, acetic acid concentration, reaction time and reaction temperature. From the data analyzed, 76.69% of optimum gel content was obtained with 33.77 g/g of degree of swelling. Other than that, the swelling properties of CMSS–acid hydrogel in different media such as salt solution, different pH of phosphate buffer saline solution as well as acidic and alkaline solution were also investigated. The results showed that the CMSS–acid hydrogel swelled in both alkaline and salt solution, while in acidic or low pH solution, it tended to shrink and deswell. The production of the hydrogel as a smart material offers a lot of auspicious benefits in the future especially related to swelling behaviour and properties of the hydrogel in different types of media.     

Selection of anion exchangers for detoxification of dilute-acid hydrolysates from spruce

Six anion-exchange resins with different properties were compared with respect to detoxification of a dilute-acid hydrolysate of spruce prior to ethanolic fermentation with Saccharomyces cerevisiae. The six resins encompassed strong and weak functional groups as well as styrene-, phenol-, and acrylic-based matrices. In an analytical experimental series, fractions from columns packed with the different resins were analyzed regarding pH, glucose, furfural, hydroxymethylfurfural, phenolic compounds, levulinic acid, acetic acid, formic acid, and sulfate. An initial adsorption of glucose occurred in the strong alkaline environment and led to glucose accumulation at a later stage. Acetic and levulinic acid passed through the column before formic acid, whereas sulfate had the strongest affinity. In a preparative experimental series, one fraction from each of six columns packed with the different resins was collected for assay of the fermentability and analysis of glucose, mannose, and fermentation inhibitors. The fractions collected from strong anion-exchange resins with styrene-based matrices displayed the best fermentability: a sevenfold enhancement of ethanol productivity compared with untreated hydrolysate. Fractions from a strong anion exchanger with acrylic-based matrix and a weak exchanger with phenol-based resin displayed an intermediate improvement in fermentability, a four- to fivefold increase in ethanol productivity. The fractions from two weak exchangers with styrene- and acrylic-based matrices displayed a twofold increase in ethanol productivity. Phenolic compounds were more efficiently removed by resins with styrene-and phenol-based matrices than by resins with acrylic-based matrices.     

Low-Cost Production of Green Microalga Botryococcus braunii Biomass with High Lipid Content Through Mixotrophic and Photoautotrophic Cultivation

Botryococcus braunii is a microalga that is regarded as a potential source of renewable fuel because of its ability to produce large amounts of lipid that can be converted into biodiesel. Agro-industrial by-products and wastes are of great interest as cultivation medium for microorganisms because of their low cost, renewable nature, and abundance. In this study, two strategies for low-cost production of B. braunii biomass with high lipid content were performed: (i) the mixotrophic cultivation using molasses, a cheap by-product from the sugar cane plant as a carbon source, and (ii) the photoautotrophic cultivation using nitrate-rich wastewater supplemented with CO₂ as a carbon source. The mixotrophic cultivation added with 15 g L^?1 molasses produced a high amount of biomass of 3.05 g L^?1 with a high lipid content of 36.9 %. The photoautotrophic cultivation in nitrate-rich wastewater supplemented with 2.0 % CO₂ produced a biomass of 2.26 g L^?1 and a lipid content of 30.3 %. The benefits of this photoautotrophic cultivation are that this cultivation would help to reduce accumulation of atmospheric carbon dioxide and more than 90 % of the nitrate could be removed from the wastewater. When this cultivation was scaled up in a stirred tank photobioreactor and run with semi-continuous cultivation regime, the highest microalgal biomass of 5.16 g L^?1 with a comparable lipid content of 32.2 % was achieved. These two strategies could be promising ways for producing cheap lipid-rich microalgal biomass that can be used as biofuel feedstocks and animal feeds.     

Breakfast cereal sampling study for nutritional elements

The National Institute of Standards and Technology (NIST) has established a Dietary Supplement Laboratory Quality Assurance Program (DSQAP) in collaboration with the National Institutes of Health Office of Dietary Supplements (NIH-ODS). The DSQAP invites laboratories twice annually to participate in interlaboratory studies where participants elect to measure concentrations of nutritional and/or toxic elements as well as active and/or marker compounds. One of these studies was designed to determine the effects of material granularity and sample processing techniques on measurement variability (precision) as well as to provide participating laboratories information on their performance relative to the NIST assigned values (bias) and to the other participants (concordance). Participants were asked to determine the mass fractions of Ca, Fe, and Zn, in mg/kg, in six breakfast cereal samples. Cereal samples consisted of three ground materials (homogenized wheat, wheat, and rice), two flake materials (wheat and rice) and a partially crushed material (a wheat/rice mixture). In general, approximately 25 % of the laboratories processed and analyzed the suite of six cereal materials with adequate to exemplary measurement precision. Over half of the laboratories (60 %) experienced measurement issues related to only a particular type of cereal matrix or for only a single element. A small number (15 %) of laboratories experienced significant sample processing or measurement problems. Future studies planned by the DSQAP may be designed to use commercial products to aid laboratories with their sampling and analytical techniques.

Intelligent drug delivery systems obtained by radiation

Radiation-induced polymerization of acryloyl-L-proline methyl ester, an -aminoacid-containing monomer, in the presence of a crosslinking agent and a hydrophilic monomer gave rise to polymer hydrogels whose water content at equilibrium was found to decrease as the swelling temperature increased. Some hydrogel samples were obtained with entrapped acetaminophen, an analgesic and antipyretic drug. It was ascertained that the release of the drug was controlled by both the hydrophilicity of the polymer matrices and the environmental temperature.     

Dynamics of cellulase production by glucose grown cultures of Trichoderma reesei Rut-C30 as a response to addition of cellulose

An economic process for the enzymatic hydrolysis of cellulose would allow utilization of cellulosic biomass for the production of easily fermentable low-cost sugars. New and more efficient fermentation processes are emerging to convert this biologic currency to a variety of commodity products with a special emphasis on fuel ethanol production. Since the cost of cellulase production currently accounts for a large fraction of the estimated total production costs of bioethanol, a significantly less expensive process for cellulase enzyme production is needed. It will most likely be desirable to obtain cellulase production on different carbon sources—including both polymeric carbohydrates and monosaccharides. The relation between enzyme production and growth profile of the microorganism is key for designing such processes. We conducted a careful characterization of growth and cellulase production by the soft-rot fungus Trichoderma reesei. Glucosegrown cultures of T. reesei Rut-C30 were subjected to pulse additions of Solka-floc (delignified pine pulp), and the response was monitored in terms of CO₂ evolution and increased enzyme activity. There was an immediate and unexpectedly strong CO₂ evolution at the point of Solka-floc addition. The time profiles of induction of cellulase activity, cellulose degradation, and CO₂ evolution are analyzed and discussed herein.     

温度敏感水凝胶包覆长周期光纤光栅传感器研究

以N-异丙基丙烯酰胺(NIPAM)为单体、N,N'-亚甲基双丙烯酰胺(MBAA)为交联剂、安息香二甲醚(DMPA)为引发剂,利用紫外光引发聚合制备了一系列温度敏感性聚(N-异丙基丙烯酰胺)(PNIPAM)水凝胶,并对其性能进行了测定.结果表明,PNIPAM水凝胶的平衡膨胀比随着交联程度的变化而改变.当交联程度适当时,水凝胶可具有最大的溶胀比.在此研究基础上,利用浸渍提拉法在长周期光纤光栅(LPFG)包层外制备了PNIPAM水凝胶薄膜包覆层.研究了得到的LPFG传感器对温度和湿度的响应性,该类型传感器表现出对温度的灵敏响应性.     

Swine Manure-Based Pilot-Scale Algal Biomass Production System for Fuel Production and Wastewater Treatment—a Case Study

Integration of wastewater treatment with algae cultivation is one of the promising ways to achieve an economically viable and environmentally sustainable algal biofuel production on a commercial scale. This study focused on pilot-scale algal biomass production system development, cultivation process optimization, and integration with swine manure wastewater treatment. The areal algal biomass productivity for the cultivation system that we developed ranged from 8.08 to 14.59 and 19.15–23.19 g/m²?×?day, based on ash-free dry weight and total suspended solid (TSS), respectively, which were higher than or comparable with those in literature. The harvested algal biomass had lipid content about 1.77–3.55 %, which was relatively low, but could be converted to bio-oil via fast microwave-assisted pyrolysis system developed in our lab. The lipids in the harvested algal biomass had a significantly higher percentage of total unsaturated fatty acids than those grown in lab conditions, which may be attributed to the observed temperature and light fluctuations. The nutrient removal rate was highly correlated to the biomass productivity. The NH₃-N, TN, COD, and PO₄-P reduction rates for the north-located photo-bioreactor (PBR-N) in July were 2.65, 3.19, 7.21, and 0.067 g/m²?×?day, respectively, which were higher than those in other studies. The cultivation system had advantages of high mixotrophic growth rate, low operating cost, as well as reduced land footprint due to the stacked-tray bioreactor design used in the study.     

A green chemistry approach towards synthesizing hydrogel for sustained ocular delivery of brinzolamide: In vitro and ex vivo evaluation

Brinzolamide is a carbonic anhydrase inhibitor used in the eye drop form for the treatment of glaucoma. It requires frequent dosing to attain therapeutic concentration. Therefore, this study aimed to prepare sustained ocular drug delivery of brinzolamide. The objective of the study was to prepare a hydrogel loaded with a nanostructured lipid carrier (NLC) of brinzolamide. The hydrogel was prepared by a green synthesis approach using genipin as a natural crosslinking agent and polymers such as carboxymethyl chitosan and poloxamer 407. The melt emulsification-ultra sonication method was used to prepare a nanostructured lipid carrier of brinzolamide, which was loaded into a hydrogel using a swelling and loading method. The NLC formulation has shown small particle sizes of 111.20 ?± ?2.15 ?nm, polydispersity index of 0.280 ?± ?0.005 and % entrapment efficiency of 82.16% ?± ?0.14%. The NLC-loaded hydrogels of brinzolamide formulations were studied for swelling properties and showed temperature and pH-responsive swelling behavior. The optimized hydrogel formulation has been studied for in vitro drug release and showed drug release for a longer duration (24 ?h) than marketed eye drops (8 ?h). In an ex vivo study, hydrogel formulations showed transcorneal permeability 4.54 times greater than marketed eye drops. The hydrogel formulation of brinzolamide produced by the green synthesis method has shown sustained-release properties with no sign of ocular irritation. Hence, the hydrogel of brinzolamide-loaded NLC would be the potential drug delivery approach in the near future for sustained ocular drug delivery in glaucoma management.     

Preparation and characterization of enzymatically hydrolyzed prolamins from wheat,rye, and barley as references for the immunochemical quantitation of partially hydrolyzed gluten

Celiac disease (CD) is a permanent gastrointestinal disorder characterized by the intolerance to a group of proteins called gluten present in wheat, rye, barley, and possibly oats. The only therapy is a strict lifelong gluten-free diet. The standard method for gluten determination in foods produced for CD patients is the R5-enzyme-linked immunosorbent assay (ELISA) as proposed by the recent Codex Alimentarius Draft Revised Standard. This test is based on the determination of prolamins, the alcohol-soluble proteins of gluten, and is available as a sandwich ELISA for intact proteins and as a competitive ELISA for gluten-derived peptides. While the suitability of the sandwich ELISA including a wheat prolamin (gliadin) reference for calibration has been shown by various studies and a ring test, the competitive ELISA still lacks a convenient reference for the quantitation of gluten peptides in fermented cereal foods (e.g., sourdough products, starch syrup, malt extracts, beer). Therefore, the aim of the present study was to prepare a suitable reference for the quantitation of partially hydrolyzed gluten in fermented wheat, rye, and barley products. The prolamin fractions from barley (hordein) and rye (secalin) were isolated from corresponding flours by means of a modified preparative Osborne fractionation. The prolamin fraction from wheat was obtained as reference gliadin from the Prolamin Working Group. The prolamin fractions were successively digested by pepsin and trypsin or pepsin and chymotrypsin procedures, which have been used for CD-specific toxicity tests on cereal storage proteins for many years. The protein/peptide content (N × 5.7) of the prolamin fractions and digests, which was the basis for the calculation of the gluten content by means of ELISA, varied between 67.1% and 96.0%. The prolamin fractions and enzymatic digests were then tested for their response in both sandwich and competitive assays. Intact prolamins responded similarly in both ELISA showing no important differences between the cereals. In the case of digested proteins, however, the sandwich ELISA was considerably less sensitive than the competitive ELISA. The former provided approximately 40% and the latter 70% of the signal intensity obtained with the intact prolamins. Thus, the combination of the competitive ELISA and the enzymatic digests of prolamin fractions as reference was considered to be an adequate system for the analysis of partially hydrolyzed gluten. The limit of detection using a peptic-tryptic hordein digest as reference was 2.3 μg prolamin equivalent per milliliter, and the limit of quantitation was 6.7 μg prolamin equivalent per milliliter. This system was applied for the determination of gluten equivalents in five commercial beverages based on fermented cereals.      

Utilization of Agricultural Residues of Pineapple Peels and Sugarcane Bagasse as Cost-Saving Raw Materials in Scenedesmus acutus for Lipid Accumulation and Biodiesel Production

The aim of this study is to optimize the lipid accumulation in microalgae by using two agricultural residues of pineapple peels and sugarcane bagasse as low-cost organic carbon sources. Green microalgae Scenedesmus acutus was isolated and selected for cultivation. Effects of three initial sugar concentrations and the stage for adding sugar during cultivation on biomass and lipid production were investigated. The results clearly showed that two-stage cultivation is more suitable than one-stage. The maximum biomass concentration and productivity were obtained at 3.85 g/L and 160.42 mg/L/day when sugarcane bagasse was used. The highest lipid content and lipid yield was reached at 28.05 % and 0.93 g/L when pineapple peels were used, while in the case of sugarcane bagasse, 40.89 % and 1.24 g/L lipid content and yield were obtained. Lipid content was found in normal condition (autotrophic) at 17.71 % which was approximately 2.13-fold lower than when sugarcane bagasse was used (40.89 %). Biodiesel production via in situ transesterification was also investigated; the main fatty acids of palmitic acid and oleic acid were found. This work indicates that using agricultural residues as organic carbon sources could be able to increase lipid content and reduce the cost of biofuel production.