Chemical speciation of trace metals in seawater: a review.

The recent development of the chemical speciation of trace metals in seawater is described. The speciation studies reveal that metal ion complexation is one of the most important processes in seawater; especially, most bioactive trace metals, such as Fe(III) and Cu, exist as complexes with ligands in dissolved organic matter. The organic ligands in seawater are characterized with metal ions selected by the HSAB concept. A strong organic ligand, which originates from marine microorganisms, is classified as a hard base including carboxylates. The free organic ligand concentrations in seawater are buffered by complexation with excess amounts of Ca and Mg in seawater. The chemical equilibrium model suggested that the concentrations of bioactive free metal ions are at an optimal level to activities of marine microorganisms. For chemical speciation, it is important to have a better understanding of the ecological roles of trace metals in seawater.     

Flow injection flame atomic absorption determination of Cu, Mn and Zn partitioning in seawater by on-line room temperature sonolysis and minicolumn chelating resin methodology

A flow-injection system is developed for Cu, Mn and Zn partitioning in seawater by flame atomic absorption spectrometry. The first approach is where the trace metal species are fractionated in situ, but analysis is performed by using a flow injection manifold in the laboratory. This operational mode is used for the determination of the dissolved labile metallic fraction and is based on the elution of this fraction from a minicolumn packed with a chelating resin containing iminodiacetic acid groups (Serdolit Chelite Che) loaded in situ with the sample. The second is used for the determination of total dissolved concentrations of trace metals. This last mode is based on the retention/preconcentration of total dissolved metals on the chelating resin after on-line sonolysis of seawater samples acidified with diluted nitric acid to breakdown the metal-organic matter complexes. The figures of merit for Cu, Mn and Zn determinations in both fractions are given and the obtained values are discussed. The fractionation scheme is applied to the analysis of coastal seawater samples collected in Galicia (Northwest, Spain). The results of fractionation showed that Mn and Zn are mainly in the labile fraction, while Cu was mainly present in the organic fraction.     

Evaluation of metal fractions in river sediments and waters: application of chelation chromatography-differential pulse anodic stripping voltammetry

The ability of chelation chromatography in combination with differential pulse anodic stripping voltammetry (DPASV) to provide a simple, fast and reliable way of dealing with interionic interferences, competitive complexations, re-adsorption of released metal ions and sorption of spiking metal ions by organic/inorganic materials in the complex matrixes of real natural samples has been critically examined. The technique is based on the selective complexation of target metal fractions on some novel sorbents which are polymeric chelating resins doped on stationary supports (Whatman No. 1 paper and silica gel). The usual complications of leaching of the resin and/or the chelating ligand and colloid retention on the sorption bed at any stage of separation were largely obviated with these sorbents under the operational conditions of metal sorption. A detailed study on the application of such sorbents to the differentiation of ionic (free), labile (ionic plus weakly complexed) and bound (strongly complexed) metal fractions present in local river-sediment and water samples was carried out. Chelating resin-impregnated paper (CRIP) and chelating resin-immobilized silica gel column (CRISC) methods of chromatographic separation of analyte trace metals in combination with the follow-up 'standard addition' procedure of the DPASV technique were employed. A modest attempt has been made to formulate a speciation (fractionation) scheme for metal contents present in river-sediments and waters on the basis of selective retention of ionic and labile fractions on complexing resins.     

Metal speciation measurement by diffusive gradients in thin films technique with different binding phases

Since its invention in the mid-1990s, the diffusive gradients in thin films (DGT) technique has rapidly become one of the most promising in situ sampling techniques for trace metal measurement in natural waters. We investigated here the possibility of using DGT devices with different binding phases to determine different DGT labile fractions of Cd and Cu in laboratory solutions and in natural waters. Several binding phases were studied, including conventional Chelex 100 resin imbedded polyacrylamide hydrogel (Chelex) and several recently developed binding phases, poly(acrylamide-co-acrylic acid) (PAM-PAA) gel, poly(acrylamidoglycolic acid-co-acrylamide) (PAAG-PAM) gel, Whatman P81 cellulose phosphate ion-exchange membrane (P81), and poly(4-styrenesulfonate) (PSS) aqueous solution. Laboratory testing in metal solutions spiked with EDTA or humic acid suggested that all the DGT devices measured only free metal ions and inorganic metal complexes. Upon field testing at both freshwater and seawater sites it was found that the DGT labile metal concentrations measured by different binding phases can be significantly different, suggesting that the DGT labile metal fractions were dependent on binding strength of the binding phase. By designing binding phases that can compete with different natural water complexing ligands to varying extents, it is possible to use these different DGT devices to measure metal speciation in natural waters.     

Development of physico-chemical speciation procedures to investigate the toxicity of copper,lead, cadmium and zinc towards aquatic biota

A range of model compounds was studied to test the effect of complexing agents on the adsorption of copper, lead, cadmium and zinc by Chelex-100 resin, oxine porous glass, thiol porous glass and thiol resin, from seawater and distilled water. The thiol materials, while showing behaviour similar to Chelex-100 resin and oxine porous glass for zinc, cadmium and lead, retained copper much more strongly. Methods for measuring lipid-soluble metal complexes in waters were also studied. Bio-Rad SM2 resin was the most suitable extractant, although a citrate buffer of pH 5.7 was needed to prevent the co-adsorption of free metal ions. Seawater and various fresh waters were analyzed for trace metal speciation by using Chelex-100 resin, thiol resin and anodic stripping voltammetry to determine labile metal. Bio-Rad SM2 resin and hexane—butanol extraction were used for the estimation of lipid-soluble metal. The polluted water samples had higher fractions of labile and organic-soluble metal, but it was concluded that some of the waters contained unidentified ligands which caused speciation behaviour different from that of the synthetic solutions with model ligands. The factors involved in the choice of speciation procedures for the measurement of the toxic fraction of a metal in a water sample are discussed in detail.     

Determination of iron and copper in seawater at pH 1.7 with a new commercially available chelating resin, NTA Superflow

The use of a commercially available chelating resin with NTA-type functional groups for concentration of trace metals from seawater is described. Trace metal recoveries from this NTA Superflow chelating resin are pH dependent. At a pH of ≤2 only iron(III) and copper are quantitatively recovered from the resin. Iron(II) cannot be quantitatively recovered from this resin below a pH of 5. However, oxidation of acidified seawater samples (pH 1.7) with H₂O₂ prior to loading onto the resin has been demonstrated to allow quantitative recovery of total dissolved iron. Deferrioxamine and Rhodoturlic Acid, two commercially available siderophores were used to investigate the effect of strong Fe(III)-binding organic ligands on the ability to retain iron at different pH values. Acidification of seawater samples to pH 1.7 dissociates the iron complexed to these organic ligands, thereby allowing total dissolved iron and copper to be determined. Acidified samples from Monterey Bay were analyzed by a flow injection method coupled to ICP-SFMS detection using the NTA Superflow resin in the pre-concentration step. Results from this study show that when seawater samples are stored acidified (pH 1.7) over time, a portion of iron(III) is reduced to iron(II), thus necessitating the use of H₂O₂ to reoxidize the Fe(II) to Fe(III) prior to analysis. Total dissolved concentrations of iron and copper can be directly obtained on seawater samples at pH 1.7 with this method, eliminating the need to buffer the sample to a higher pH prior to column loading. This resin has the potential to be used in shipboard or in situ flow injection methods.     

Online coupling of ultraviolet titanium dioxide film reactor with poly(methyl methacrylate) solid phase extraction–inductively coupled plasma mass spectrometry for speciation of trace heavy metals in freshwater

To rapidly discriminate dissolved labile and stable organic-complexed metal ions, a fully automated approach comprising a photocatalyst-assisted digestion reactor (PADR), a non-functionalized poly(methyl methacrylate) (PMMA) solid-phase extraction (SPE) column, and inductively coupled plasma-mass spectrometry (ICP-MS) instrumentation was developed. To separate labile dissolved metals from other concomitant metal complexes, a non-functionalized PMMA bead was used as the SPE adsorbent because of its selective interaction with labile metal ions. The PMMA SPE–ICP-MS hyphenated system was optimized, and its analytical reliability was confirmed by using it to analyze the certified reference material—NIST 1643e (artificial saline water). Detection limits (σ = 3, n = 7) for all analyte ions (Ni, Cu, Zn, Cd, and Pb), which ranged from 0.005 to 0.186 μg L^{− 1}, could be reached; therefore, this technique appeared uniquely suited to determining levels of trace elements in most natural freshwater samples. To determine the total quantity of dissolved metals, a new digestion reactor (PADR) was developed for online conversion of metal–organic complexes to their labile forms. Compared to conventional photolysis methods, the digestion time improved considerably and the digestion efficiency for organic substances was excellent (> 90%) in the PADR format, with a very short resident time of 10 min. After construction of the PADR–PMMA SPE–ICP-MS hyphenated system, the speciation potential of our developed method was evaluated by analyzing three intentionally contaminated water samples. Results indicated that our developed hyphenated system is effective for online determination of total, labile, and metal–humic complexes in freshwater samples and that is capable of providing representative metal speciation patterns for different aquatic systems.     

Trace metals species in sea-water-I: removal of trace metals from sea-water by a chelating resin

A significant fraction of the copper, lead, cadmium and zinc in sea-water exists in a form which is not retained by a chelating resin (Chelex-100) or extracted by ammonium pyrrolidinedithiocarbamate. Anodic stripping voltammetric results suggest that the major part of the unavailable trace metal is adsorbed on, or occluded in, organic or inorganic colloidal particles. An ionic equilibria computer program was used to predict the effect of various complexing agents on trace metal species in sea-water. Citric acid and amino-acids, with the exception of l-cysteine, were shown to be unimportant as complexing agents, and the ability of an EDTA-like ligand to complex Cu, Pb, Cd and Zn is controlled entirely by the concentrations of the ligand and of "labile" Fe(III) and Cr(III) in sea-water, since these two ions together will react quantitatively with EDTA. l-Cysteine, if present in sea-water, would also complex the trace metals.     

Trace metal speciation measurements in waters by the liquid binding phase DGT device

The speciation measurements of trace metals by the diffusive gradients in thin-films technique (DGT) using a poly(4-styrenesulfonate) (PSS) aqueous solution as a binding phase and a cellulose dialysis membrane (CDM) as a diffusive layer, CDM-PSS DGT, were investigated and showed good agreement with computer modelling calculations. The diffusion coefficients of ethylenediaminetetraacetic acid (EDTA) complexes with Cd²⁺ and Cu²⁺ were measured and compared with those of the inorganic metal ions. CDM-PSS DGT device was tested for speciation measurement in sample solutions containing EDTA, tannic acid (TA), glucose (GL), dodecylbenzenesulfonic acid (DBS) and humic acid (HA) as complexing ligands forming organic complexes with varying stability constants. Lower percentages of DGT labile copper concentrations over total filterable copper concentrations obtained from the deployments in freshwater sites indicated that copper complexes with organic matter were basically not measured by the devices.     

Determination of Dynamic Metal Complexes and their Diffusion Coefficients in the Presence of Different Humic Substances by Combining Two Analytical Techniques

The combined use of a competing ligand exchange (CLE) method and a diffusive gradient in thin films (DGT) technique in a quasi-labile system provides a better understanding of dynamic metal (Cu and Ni) complexes in the presence of humic substances of different origins. The CLE and DGT techniques provide total labile (dynamic) metal complexes (Cu and Ni) and their dissociation rate constants in environmental systems. DGT was found to estimate lower concentrations of labile metal complexes than CLE. These discrepancies were caused by diffusion controlled metal flux (towards the binding resin gel) in the diffusive gel of DGT. The interactions of Cu and Ni with humic acids are stronger than their interactions with fulvic acid and natural organic matter. Changes in the lability of Ni and Cu complexes (complexed with humic substances of different origins) with the changing analytical detection window indicate that the complexes of these metals were formed with different binding sites with diverse binding energies in the humic substances. The combination of these two techniques was found to be very useful in determining diffusion coefficients of labile metal-humate complexes in quasi-labile systems. The values of diffusion coefficients of labile Ni and Cu complexes determined in this study are in good agreement with limited results from the literature. This finding is novel and can be very useful in further improving our understanding of the metal-humate interactions in natural environments.     

Multielemental speciation of trace elements in estuarine waters with automated on-site UV photolysis and resin chelation coupled to inductively coupled plasma mass spectrometry

An integrated approach for the accurate determination of total, labile and organically bound dissolved trace metal concentration in the field is presented. Two independent automated platforms consisting of an ultraviolet (UV) on-line unit and a chelation/preconcentration/matrix elimination module were specifically developed to process samples on-site to avoid sample storage prior to inductively coupled plasma mass spectrometry (ICP-MS) analysis. The speciation scheme allowed simultaneous discrimination between labile and organic stable dissolved species of seven trace elements including Cd, Cu, Mn, Ni, Pb, U and Zn, using only 5 ml of sample with detection limits ranging between 0.6 ng l⁻¹ for Cd and 33 ng l⁻¹ for Ni. The influence of UV photolysis on organic matter and its associated metal complexes was investigated by fluorescence spectroscopy and validated against natural samples spiked with humic substances standards. The chelation/preconcentration/matrix elimination procedure was validated against an artificial seawater spiked sample and two certified reference materials (SLRS-4 and CASS-4) to ensure homogenous performance across freshwater, estuarine and seawater samples. The speciation scheme was applied to two natural freshwater and seawater samples collected in the Adour Estuary (Southwestern, France) and processed in the field. The results indicated that the organic complexation levels were high and unchanged for Cu in both samples, whereas different signatures were observed for Cd, Mn, Ni, Pb, U and Zn, suggesting organic ligands of different origin and/or their transformation/alteration along estuarine water mixing.     

Synthesis,characterization, and analytical applications of 1,3-dimethyl-4-acetyl-2-pyrazolin-5-one

The synthesis of a new chelating reagent, 1,3-dimethyl-4-acetyl-2-pyrazolin-5-one (DMAP), is described. The reagent is characterized by physical, spectral and thermal methods. The reagent is soluble in water and forms neutral, water-soluble complexes with a number of metal ions, including Zr(IV), Th(IV), and U(VI). The complexed metal ions can be concentrated from dilute aqueous solution by adsorption onto a small column of Amberlite XAD-4 resin. The synthesis and characterization of the uranium (VI) complex of DMAP are described. The complex has the formula UO₂ (DMAP)₂, with a logarithmic formation constant of 8.64. A procedure is given for concentrating trace levels of U(VI) from solution by complexation with DMAP and sorption on XAD-4 resin. The method shows good recovery and precision for the concentration of trace U(VI) from artificial seawater.     

Speciation of Charged Complexes by Donnan Dialysis

Abstract

The assignment of metal complexes to various regimes on the basis of their dissociation kinetics is one type of metal speciation study. The most common scheme, which involves column ion-exchange as a means of separating free metal ions and metals in the form of highly labile complexes from other forms of metals in the sample, is demonstrated to categorize incorrectly stable, charged complexes such as iron(II) and nickel(II) o-phenanthroline as labile. Donnan dialysis is an alternative ion-exchange method for metal speciation studies. Data are provided which demonstrate that the above complexes are correctly assigned by the Donnan dialysis method. The relative labilities of ethylenediamine and triethylenetetramine complexes of iron (II) and nickel (II) are also correctly determined by Donnan dialysis.     

New analytical procedure based on a cellulose bag and ionic exchanger with p-aminobenzoic acid groups for differentiation of labile and inert metal species in aquatic systems

A new procedure was developed for the in situ characterization of the lability of metal species in aquatic systems by using a system equipped with a diffusion membrane and cellulose organomodified with p-aminobenzoic acid groups (DM-Cell-PAB). To this end, the DM-Cell-PAB system was prepared by adding cellulose organomodified with p-aminobenzoic acid groups (Cell-PAB) to pre-purified cellulose bags. After the DM-Cell-PAB system was sealed, it was examined in the laboratory to evaluate the influence of complexation time, mass of exchanger, pH, metal ions (Cu, Cd, Fe, Mn, and Ni), and concentration of organic matter on the relative lability of metal species. It was found that the pH and kinetics strongly influence the process of metal complexation by the DM-Cell-PAB system. At all pH levels, Cd, Mn, and Ni showed lower complexation with Cell-PAB resin than Cu and Fe metals. Note that relative lability of metals complexed to aquatic humic substances (AHS) in the presence of Cell-PAB resin showed the following order: Cu≅Fe≫Ni>Mn=Cd. The results presented here also indicate that increasing the AHS concentration decreases the lability of metal species by shifting the equilibrium to AHS–metal complexes. Our results indicate that the system under study offers an interesting alternative that can be applied to in situ experiments for differentiation of labile and inert metal species in aquatic systems.     

Recent Advances in the Schiff Bases and N‐Heterocyclic Carbenes as Ligands in the Cross‐Coupling Reactions: A Comprehensive Review

Cross‐coupling reactions, namely, the Suzuki–Miyaura, Heck, Sonogashira, Hiyama, Negishi, Kumada, and Hartwig–Buchwald, are the most powerful approaches in the formation of C–C, C–N, C–O, and C–S bonds for the complex organic scaffolds in drugs, natural products, organic materials, and fine chemicals. The nitrogen‐based ligands have upper hands in these reactions because they are air stable, inexpensive, and easier to handle than the phosphorous counterparts. In this perspective, Schiff bases and N‐heterocyclic carbenes have been explored extensively in terms of novel design and preparation as ligands in the coupling reactions. Facile recovery and reusability of these ligands make them eco‐friendly and economical. A comprehensive outline on the progress in Schiff bases–metal complexes and NHC–metal complexes that mediated cross‐coupling reactions with recent examples highlighted is reported (160 references).     

Disequilibrium effects in metal speciation by capillary electrophoresis inductively coupled plasma mass spectrometry (CE-ICP-MS); theory, simulations and experiments

A theoretical-experimental approach to evaluate disequilibrium effects in capillary electrophoresis inductively coupled plasma mass spectrometry (CE-ICP-MS) is presented. Electrophoresis requires metal ligand (ML) complexes to be stable on the time scale of separation and detection. By expressing ML complex stability in terms of half-life during a CE separation, an evaluation of separation artifacts can be made. Kinetically slow metals like Cr, Al or Fe form complexes that are stable on the time scale of electrophoretic separations. Kinetically fast metals, like Pb, Hg, Cu, Cd and REE, however tend to form labile complexes which unless complexed by strong chelators will dissociate during CE separations. A reactive transport simulation model of CE separations involving ML complexes allows a more detailed prediction of disequilibrium bias and identifies kinetically limited from mobility-limited types of dissociation. Complementary experimental results are given for kinetic and equilibrium binding experiments of Sm with humic acid. The equilibrium logK for Sm-Leonardite humic acid (HA) binding at pH 7 and 0.01 mol L(-1) ionic strength was determined to be 13.04. Kinetic rates of formation and dissociation for SmHA were 5.9 10(8) and 5.3 10(-5) mol s(-1).     

Leveraging Metal and Ligand Reactive Sites for One Pot Reactions: Ligand-Centered Borenium Ions for Tandem Catalysis with Palladium

Tandem catalysts that perform two different organic transformations in a single pot are highly desirable because they enable rapid and efficient assembly of simple organic building blocks into more complex molecules. Many examples of tandem catalysis rely on metal-catalyzed reactions involving one or more metal complexes. Remarkably, despite surging interest in the development of chemically reactive (i. e., non-innocent) ligands, there are few examples of metal complexes that leverage ligand-centered reactivity to perform catalytic reactions in tandem with separate catalytic reactions at the metal. Here we report how multifunctional Pd complexes with triaminoborane-derived diphosphorus ligands, called TBDPhos, appear to facilitate borenium-catalyzed cycloaddition reactions at the ligand, and Pd-catalyzed Stille and Suzuki cross-coupling reactions at the metal. Both transformations can be accessed in one pot to afford rare examples of tandem catalysis using separate metal and ligand catalysis sites in a single complex.     

Effect of ion-pairing modifiers in the separation of cobalt,copper, iron,and palladium by pre-column derivatization and high performance liquid chromatography

Summary Multivariate experiment analyses have been used to determine the behaviour, in high-performance liquid chromatography, of cobalt, copper, iron and palladium complexes with 1-nitroso-2-naphthol-6-sodium sulphonate or 2-nitroso-1-naphthol-6-sodium sulphonate ion-associated before injection or during elution with quaternary ammonium salts, namely TDTMABr, CTMABr, and TDDMBACl.The role of the ion-pairing modifiers was to regulate the capacity factors of the complexed metals. The work-up procedures showed that the elution and separation of the metal complex anions were influenced by the concentration and choice of cationic counter compounds. TDTMABr, CTMABr and TDDMBACl were replaced with inorganic salts, such as sodium sulphate, but there was no evidence of better metal separation than with the organic compounds.The studies showed that complexed metal ions can be separated using endcapped silica or polymer as column packing materials. The result of most-potential value was that gradient elution could be used to minimize retention without dissocation of the ion-associates on the column.     

Lability criteria in diffusive gradients in thin films

The penetration of metal complexes into the resin layer of DGT (diffusive gradients in thin films) devices greatly influences the measured metal accumulation, unless the complexes are either totally inert or perfectly labile. Lability criteria to predict the contribution of complexes in DGT measurements are reported. The key role of the resin thickness is highlighted. For complexes that are partially labile to the DGT measurement, their dissociation inside the resin domain is the main source of metal accumulation. This phenomenon explains the practical independence of the lability degree of a complex in a DGT device with respect to the ligand concentration. Transient DGT regimes, reflecting the times required to replenish the gel and resin domains up to the steady-state profile of the complex, are also examined. Low lability complexes (lability degree between 0.1 and 0.2) exhibit the longest transient regimes and therefore require longer deployment times to ensure accurate DGT measurements.     

铁配合物的环境光化学及其参与的环境化学过程

铁是地壳中含量最为丰富的金属元素之一,而自然界中存在的绝大多数溶解性铁都是以有机络合形式存在的。环境中的铁配合物在光照下会发生直接光解和次级的(光)化学反应过程,生成还原性的Fe(Ⅱ)和有机自由基以及衍生的活性氧物种。铁配合物的环境光化学反应将深刻影响着氧自由基的生成与衰减、有机物降解和其他元素的环境化学循环过程,因此,成为近年来国际环境科学领域的研究热点。本文介绍了铁配合物光还原反应的类型和原理,分析了Fe(Ⅱ)(光)化学氧化的可能机理和影响因素,并对国内外关于铁参与的环境化学过程所开展的研究进行了评述。在此基础上,通过分析目前研究中所存在的问题,对今后的研究方向和趋势作了展望。