Synthesis and characterization of Fe2O3/SiO2 nanocomposites

Fe₂O₃/SiO₂ nanocomposites based on fumed silica A-300 (S_BET = 337 m²/g) with iron oxide deposits at different content were synthesized using Fe(III) acetylacetonate (Fe(acac)₃) dissolved in isopropyl alcohol or carbon tetrachloride for impregnation of the nanosilica powder at different amounts of Fe(acac)₃ then oxidized in air at 400–900 °C. Samples with Fe(acac)₃ adsorbed onto nanosilica and samples with Fe₂O₃/SiO₂ including 6–17 wt% of Fe₂O₃ were investigated using XRD, XPS, TG/DTA, TPD MS, FTIR, AFM, nitrogen adsorption, Mössbauer spectroscopy, and quantum chemistry methods. The structural characteristics and phase composition of Fe₂O₃ deposits depend on reaction conditions, solvent type, content of grafted iron oxide, and post-reaction treatments. The iron oxide deposits on A-300 (impregnated by the Fe(acac)₃ solution in isopropanol) treated at 500–600 °C include several phases characterized by different nanoparticle size distributions; however, in the case of impregnation of A-300 by the Fe(acac)₃ solution in carbon tetrachloride only α-Fe₂O₃ phase is formed in addition to amorphous Fe₂O₃. The Fe₂O₃/SiO₂ materials remain loose (similar to the A-300 matrix) at the bulk density of 0.12–0.15 g/cm³ and S_BET = 265–310 m²/g.     

Cu修饰的Fe2O3/Al2O3氧载体的循环反应稳定性研究

采用冷冻干燥法制备了经Cu修饰（10%）的Fe₂O₃/Al₂O₃氧载体。利用热重分析仪分别在850、900和950 ℃等温环境下,使氧载体交替接触还原气体和氧化气体,来模拟氧载体在化学链燃烧中的循环过程。结果表明,经Cu修饰的Fe₂O₃/Al₂O₃氧载体在850和900 ℃下的等温循环过程中反应性能都很稳定,在950 ℃时的循环反应前期有微量烧结,但在循环后期反应性能也很稳定。随着反应温度的升高,氧载体氧化速率增大,还原速率和载氧率先减小后增大。与未经修饰的Fe₂O₃/Al₂O₃氧载体相比较,在900 ℃下作等温循环实验,经Cu修饰的Fe₂O₃/Al₂O₃氧载体具有较高的载氧能力和还原速率,但氧化速率较低;两者都具有较好的循环稳定性。     

Selective Catalytic Reduction of NO with Propene over Au/Fe2O3/Al2O3 Catalysts

A series of Au/Fe₂O₃/Al₂O₃ catalysts were prepared by the homogeneous deposition-precipitation method. The catalytic activity of the catalyst samples for selective catalytic reduction of NO by propene under oxygen-rich atmosphere was evaluated. The results showed that 2%Au/10%Fe₂O₃/Al₂O₃ exhibited good low-temperature activity. The maximum of NO conversion reached 43% at 300 °C, while it was only 21% over the 2%Au/Al₂O₃ catalyst at the same temperature. The addition of 2% steam to the feed gas had little effect on the catalytic activity. X-ray diffraction results indicated that both Au and Fe₂O₃ particles were highly dispersed over Al₂O₃. H₂-temperature-programmed reduction results indicated that there was strong interaction between Au and Fe₂O₃, which made the reduction of Fe₂O₃ easy. The synergistic effect between Au and Fe₂O₃ was probably responsible for the good catalytic performance of the Au/Fe₂O₃/Al₂O₃ catalyst at low temperature.     

Synthesis of Fe3O4\SiO2\Ag nanoparticles and its application in surface-enhanced Raman scattering

To obtain a recyclable surface-enhanced Raman scattering (SERS) material, we developed a composite of Fe₃O₄\SiO₂\Ag with core\shell\particles structure. The designed particles were synthesized via an ultrasonic route. The Raman scattering signal of Fe₃O₄ could be shielded by increasing the thickness of the SiO₂ layer to 60 nm. Dye rhodamine B (RB) was chosen as probe molecule to test the SERS effect of the synthesized Fe₃O₄\SiO₂\Ag particles. On the synthesized Fe₃O₄\SiO₂\Ag particles, the characteristic Raman bands of RB could be observed when the RB solution was diluted to 5 ppm (1×10⁻⁵ M). Furthermore, the synthesized particles could keep their efficiency till four cycles.     

Reinvestigation of the Fe-rich part of the pseudo-binary system SrO–Fe2O3

The phase relations in the Fe-rich part of the pseudo-binary system SrO–Fe₂O₃ (>33 mol% Fe₂O₃) were reinvestigated between 800 and 1500 °C in air. A combination of microscopy, electron probe micro-analysis, powder X-ray diffraction and thermal analysis was used to determine phase relations, crystal structure parameters and phase transition temperatures. M-type hexagonal ferrite SrFe₁₂O₁₉ (85.71 mol% Fe₂O₃) is stable up to 1410 °C. No indication of a significant phase width was found; Sr₄Fe₆O_13±δ appears as a second phase in compositions with <85.71±0.2 mol% Fe₂O₃. Sr₄Fe₆O_13±δ itself is stable between 800 and 1250 °C. Two other hexagonal ferrites were found to exist at high temperatures only: W-type SrFe²⁺₂Fe³⁺₁₆O₂₇ is stable between 1350 and 1440 °C and X-type ferrite Sr₂Fe²⁺₂Fe³⁺₂₈O₄₆ between 1350 and 1420 °C, respectively, which is shown here for the first time. These findings in combination with previously published data were used to derive a corrected phase diagram of the Fe-rich part of the pseudo-binary system SrO–Fe₂O₃.     

A new 2212-type stair like structure: Bi14Sr21Fe12O61, m=5 member of the generic [Bi2Sr3Fe2O9]m[Bi4Sr6Fe2O16] family

A new oxide, Bi₁₄Sr₂₁Fe₁₂O_61, with a layered structure derived from the 2212 modulated type structure Bi₂Sr₃Fe₂O₉, was isolated. It crystallizes in the I2 space group, with the following parameters: a=16.58(3) Å, b=5.496(1) Å, c=35.27(2) Å and β=90.62°. The single crystal X-ray structure determination, coupled with electron microscopy, shows that this ferrite is the m=5 member of the [Bi₂Sr₃Fe₂O₉]_m[Bi₄Sr₆Fe₂O₁₆] collapsed family. This new collapsed structure can be described as slices of 2212 structure of five bismuth polyhedra thick along , shifted with respect to each other and interconnected by means of [Bi₄Sr₆Fe₂O₁₆] slices. The latter are the place of numerous defects like iron or strontium for bismuth substitution; they can be correlated to intergrowth defects with other members of the family.     

Mössbauer study of the FeV2O4---Fe3O4 system

Mössbauer spectra of the Fe_1+xV_2−xO₄ spinel solid solutions are taken to investigate the cation distribution. Room temperature spectra can be interpreted by assuming that the cation distribution is represented approximately as Fe²⁺[Fe³⁺_xV³⁺_2−x]O₄ for 0 x 0.35 and Fe³⁺[Fe²⁺Fe³⁺_x−1V³⁺_2−x]O₄ for 1 x 2 and the ionic valence arrangement changes from the 2-3-3 type (Fe²⁺[Fe³⁺_xV³⁺_2−x]O₄) to the 3-2-3 one (Fe³⁺[Fe²⁺V³⁺]O₄) in the range 0.35 x 1. Fe₂VO₄ is found to be 3-2-3 spinel, Fe³⁺[Fe²⁺V³⁺]O₄. Its paramagnetic spectrum at 473°K is, however, composed of a broad single line with isomer shift value of 0.61 mm/sec relative to stainless steel, in which the line splitting due to the ferric and ferrous ions is rendered indistinguishable.     

Phase formation, crystal chemistry, and properties in the system Bi2O3-Fe2O3-Nb2O5

Subsolidus phase relations have been determined for the Bi₂O₃-Fe₂O₃-Nb₂O₅ system in air (900-1075 °C). Three new ternary phases were observed—Bi₃Fe_0.5Nb_1.5O₉ with an Aurivillius-type structure, and two phases with approximate stoichiometries Bi₁₇Fe₂Nb₃₁O₁₀₆ and Bi₁₇Fe₃Nb₃₀O₁₀₅ that appear to be structurally related to Bi₈Nb₁₈O₅₇. The fourth ternary phase found in this system is pyrochlore (A₂B₂O₆O′), which forms an extensive solid solution region at Bi-deficient stoichiometries (relative to Bi₂FeNbO₇) suggesting that ≈4-15% of the A-sites are occupied by Fe³⁺. X-ray powder diffraction data confirmed that all Bi-Fe-Nb-O pyrochlores form with positional displacements, as found for analogous pyrochlores with Zn, Mn, or Co instead of Fe. A structural refinement of the pyrochlore 0.4400:0.2700:0.2900 Bi₂O₃:Fe₂O₃:Nb₂O₅ using neutron powder diffraction data is reported with the A cations displaced (0.43 Å) to 96g sites and O′ displaced (0.29 Å) to 32e sites (Bi_1.721Fe_0.190(Fe_0.866Nb_1.134)O₇, Fd3¯m (#227), ). This displacive model is somewhat different from that reported for Bi_1.5Zn_0.92Nb_1.5O_6.92, which exhibits twice the concentration of small B-type cations on the A-sites as the Fe system. Bi-Fe-Nb-O pyrochlores exhibited overall paramagnetic behavior with large negative Curie-Weiss temperature intercepts, slight superparamagnetic effects, and depressed observed moments compared to high-spin, spin-only values. The single-phase pyrochlore with composition Bi_1.657Fe_1.092Nb_1.150O₇ exhibited low-temperature dielectric relaxation similar to that observed for Bi_1.5Zn_0.92Nb_1.5O_6.92; at 1 MHz and 200 K the relative permittivity was 125, and above 350 K conductive effects were observed.     

The Al2O3-Fe2O3 Mixed Oxidic System, II. Catalytic Decomposition of N2O

N₂O decomposition was examined over a series of Al₂O₃-Fe₂O₃ mixed oxidic solids with composition ranging from 0 to 100% of Fe₂O₃. The catalytic activity of the solids runs parallel to the number of atoms of iron in the Al_2−x Fe_xO₃ solid solution phase. Two compensation effects are present. The first corresponds to catalysts rich in alumina, and the second one to catalysts rich in hematite. This revised version was published online in June 2006 with corrections to the Cover Date.     

The standard free energy of formation of YbFe2O4, Yb2Fe3O7, YbFeO3, and Yb3Fe5O12 at 1200°C

The standard free energy of formation of YbFe₂O₄, Yb₂Fe₃O₇, YbFeO₃, and Yb₃Fe₅O₁₂ from metallic iron, Yb₂O₃, and oxygen was determined to be ?100.38, ?158.38, ?58.17, and ?283.40 kcal/mole, respectively, at 1200°C on the basis of the phase equilibria in the FeFe₂O₃Yb₂O₃ system. The FeFe₂O₃-Lanthanoid sesquioxide systems were classified into four types with respect to the assemblage of the ternary compounds in stable existence at 1200°C, and the standard free energy of formation of YbFeO₃ was compared with those of the other lanthanoid-iron perovskites.     

一锅法制备S型异质结光催化剂Fe2O3/Fe2TiO5及其高效降解有机污染物性能

首次采用简单的一锅法制备了Fe₂O₃/Fe₂TiO₅异质结纳米材料。构建S型异质结后,与纯的Fe₂O₃和Fe₂TiO₅相比,Fe₂O₃/Fe₂TiO₅复合材料表现出更高的光催化降解速率和效率。经过2.5 h的光照后,Fe₂O₃/Fe₂TiO₅可以降解接近100%的亚甲基蓝（MB）。在Fe₂O₃/Fe₂TiO₅复合材料中,Fe₂O₃和Fe₂TiO₅之间形成了内建电场,可以促进光生电子-空穴对的分离。因此,具有更高能量的Fe₂TiO₅导带中的电子和具有更高能量的Fe₂O₃价带中的空穴可以得到有效的保留,从而使它们更加有效地扩散到催化剂表面,并参加降解反应。此外,Fe₂O₃/Fe₂TiO₅复合材料具有很好的光催化稳定性。     

The influence of La2O3 and TiO2 on NiO/MgO/α-Al2O3

Summary The effect of La₂O₃ and TiO₂ on product selectivity, methane conversion and coke formation over NiO/MgO/ α -Al₂O₃ catalyst were studied in a simultaneous steam and CO₂ reforming of methane to syngas. La₂O₃ and TiO₂ were added to the catalyst via incipient wetness impregnation and bulk precipitation techniques and catalyst activity was tested in a fixed bed quartz reactor. Results reveal that although the addition of these oxides has no effect on the product selectivity and methane conversion, but can reduce coke formation on the surface of the catalysts as it can enhance the mobility of lattice oxygen anions. The results further show that the catalysts prepared by bulk precipitation technique decrease the coke formation more effectively.     

掺杂Fe2O3对吸附相反应技术制备TiO2的形貌和光催化性能的影响

利用吸附相反应技术制备得到了掺杂不同浓度的Fe₂O₃的TiO₂复合光催化剂。通过透射电子显微镜(TEM)、紫外可见光谱和X射线衍射(XRD)研究不同掺杂浓度对TiO₂形貌和结晶过程的影响,并利用3种波长光源下的甲基橙光降解实验考评了各个复合光催化剂的催化活性。结果表明,掺杂后复合光催化剂中Fe₂O₃分散性较好较均匀。在TiO₂紫外可见吸收光谱中由于Fe₂O₃的掺杂而出现了红移,而且随着掺杂浓度增加红移越来越明显,复合光催化剂的禁带宽度也越来越小。在焙烧过程中无定形Fe₂O₃或Fe³⁺进入了TiO₂的晶格结构,从而抑制了TiO₂的结晶过程。半导体禁带宽度的减少以及TiO₂结晶过程的抑制作用,都导致紫外光下复合光催化剂催化活性的降低。但Fe₂O₃的掺杂也使得复合光催化剂在可见光区出现了一定的光催化活性。     

Coordination Chemistry of the Nanocluster [HxPMo12O40?H4Mo72Fe30(O2CMe)15O254(H2O)98]

The ligand exchange chemistry for the iron-molybdenum nanocluster [H₂PMo₁₂O₄₀⊂H₄Mo₇₂Fe₃₀(O₂CMe)₁₅O₂₅₄(H₂O)_98-x(EtOH)_x], {Mo₇₂Fe₃₀(Mo₁₂P)}-EtOH, with 3,5-lutidene, 3-butylpyridine, octanol, octanoic acid, 1-hexadecanethiol, tetraethylene glycol, and dodecylbenzenesulfonic acid is reported. The structure of {Mo₇₂Fe₃₀(Mo₁₂P)} is preserved throughout the reaction and TGA analysis indicates between 5 and 15 ligands could be attached per {Mo₇₂Fe₃₀(Mo₁₂P)}. AFM height measurements increase with increased ligand length; however, the apparent particle diameter appears to be smaller than expected as the ligands increase in size consistent with the adopting a non-extended conformation in a similar manner to that observed for self-assembled monolayers.     

An 57Fe Mössbauer effect study of magnetic ordering in the Fe2O3Cr2O3 system

⁵⁷Fe Mössbauer effect spectra have been obtained as a function of temperature for a series of Fe₂O₃Cr₂O₃ compositions in the range 0.2–75% Fe₂O₃. From 30% of Fe₂O₃ upwards, the dependence of the reduced internal magnetic field $\text{H}{}_{\mathrm{<mtext>eff</mtext>}}\text{(T)}\text{H}{}_{\mathrm{<mtext>eff</mtext>}}\text{(T = 0)}$ on reduced temperature, $\text{T}\text{T}{}_{\mathrm{N}}$, was found to be identical with that for α-Fe₂O₃, indicating the persistence of Fe₂O₃-type ordering over this composition range. For 0.2% of ⁵⁷Fe₂O₃ in Cr₂O₃, the reduced field values fall far below those for α-Fe₂O₃ or Cr₂O₃, and weak coupling of Fe₃⁺ with Cr³⁺ has been inferred.A Morin transition similar to that for α-Fe₂O₃ was not present for samples containing 75% of Fe₂O₃. Quadrupole shifts ? were found to be negative and diminishing between 75 and 30% Fe₂O₃, and positive between 20 and 0.2%. The limiting value at lowest dilution of 0.113 ± 0.010 mm/sec corresponds to a nuclear quadrupole coupling constant e²qQ of 0.45 ± 0.04, approximately half that for α-Fe₂O₃. Cone angles for Fe³⁺ spin vectors in the spin-spiral arrangements for intermediate compositions have been derived, and are similar to, but less extreme than those deduced from neutron diffraction data.     

Methanol Decomposition on Fe2O3 /MCM-48 Silica Catalyst

Fe₂O₃/MCM-48 silica samples are characterized by high catalytic activity and methane selectivity in methanol decomposition. The catalytically active phase is substantially changed by the reaction medium and/or hydrogen pretreatment.     

过渡金属修饰Fe2O3/Al2O3氧载体的Redox性能研究

采用冷冻干燥法分别制备了经Cu、Co、Mn、Ni修饰的Fe₂O₃/Al₂O₃氧载体。利用化学吸附仪,通过程序升温还原(H₂-TPR)和程序升温氧化(TPO)来研究经不同过渡金属修饰的Fe₂O₃/Al₂O₃与H₂和O₂的反应性能。实验发现,在Fe₂O₃/Al₂O₃中加入Cu、Co、Ni以后,氧载体与H₂的反应性都有提高,但是当在Fe₂O₃/Al₂O₃中加入Mn以后,氧载体的反应性和载氧能力反而下降。经Cu修饰的Fe₂O₃/Al₂O₃与H₂的反应性最高,且具有很好的反应稳定性,适合用于化学链燃烧。     

High-pressure transitions in MgAl2O4 and a new high-pressure phase of Mg2Al2O5

Phase transitions in MgAl₂O₄ were examined at 21-27 GPa and 1400-2500 °C using a multianvil apparatus. A mixture of MgO and Al₂O₃ corundum that are high-pressure dissociation products of MgAl₂O₄ spinel combines into calcium-ferrite type MgAl₂O₄ at 26-27 GPa and 1400-2000 °C. At temperature above 2000 °C at pressure below 25.5 GPa, a mixture of Al₂O₃ corundum and a new phase with Mg₂Al₂O₅ composition is stable. The transition boundary between the two fields has a strongly negative pressure-temperature slope. Structure analysis and Rietveld refinement on the basis of the powder X-ray diffraction profile of the Mg₂Al₂O₅ phase indicated that the phase represented a new structure type with orthorhombic symmetry (Pbam), and the lattice parameters were determined as a=9.3710(6) Å, b=12.1952(6) Å, c=2.7916(2) Å, V=319.03(3) Å³, Z=4. The structure consists of edge-sharing and corner-sharing (Mg, Al)O₆ octahedra, and contains chains of edge-sharing octahedra running along the c-axis. A part of Mg atoms are accommodated in six-coordinated trigonal prism sites in tunnels surrounded by the chains of edge-sharing (Mg, Al)O₆ octahedra. The structure is related with that of ludwigite (Mg, Fe²⁺)₂(Fe³⁺, Al)(BO₃)O₂. The molar volume of the Mg₂Al₂O₅ phase is smaller by 0.18% than sum of molar volumes of 2MgO and Al₂O₃ corundum. High-pressure dissociation to the mixture of corundum-type phase and the phase with ludwigite-related structure has been found only in MgAl₂O₄ among various A²⁺B³⁺₂O₄ compounds.     

Mild hydrothermal synthesis and ferrimagnetism of Pr3Fe5O12 and Nd3Fe5O12 garnets

Two pure light rare earth iron garnets Pr₃Fe₅O₁₂ and Nd₃Fe₅O₁₂ single crystals were synthesized under mild hydrothermal conditions and structurally characterized by single crystal and powder X-ray diffraction methods. Both compounds crystallize in cubic space group Ia3?d with lattice parameters a=12.670(2) Å for Pr₃Fe₅O₁₂ and a=12.633(2) Å for Nd₃Fe₅O₁₂, respectively. The synthesis of compounds was studied with regard to phase evolution and morphology development with hydrothermal conditions. We proposed the formation mechanisms and formulated a reasonable explanation for their growth habits. Ferrimagnetic Curie temperatures which have been inferred from thermo-magnetization curves were 580 K for Pr₃Fe₅O₁₂ and 565 K for Nd₃Fe₅O₁₂, and the transitions of long range order were also evidenced by differential scanning calorimetry method. The result of magnetic properties has shown that moments of the large radius Pr³⁺ and Nd³⁺ ions are parallelly coupled with net moments of iron ions.     

Thermodynamic properties and cation distribution of the ZnFe2O4Fe3O4 spinel solid solutions at 900°C

The thermodynamic properties of the Fe₃O₄ZnFe₂O₄ spinel solid solution were determined at 900°C by the use of the solid electrolyte galvanic cell Fe₂O₃ + Fe₃O₄|O^2?|Fe₂O₃ + Zn_xFe_3?xO₄The activity values obtained exhibit slight negative deviation from the ideal solution model. An analysis of the free energy of mixing of the spinel solid solution provided information on the distribution of cations between the tetrahedral and octahedral sites of the spinel lattice. This is the basis for the estimation of the free energy of formation of pure zinc ferrite from oxides. ΔG⁰_ZnFe2O4 = ?2740 ? 1.6 T cal mole^?1