Current trends in the detection of peroxide-based explosives

The increased use of peroxide-based explosives (PBEs) in criminal and terrorist activity has created a demand for continued innovation in the detection of these agents. This review provides an update to a previous 2006 review on the detection of PBEs, with a focus in this report on luminescence and fluorescence methods, infrared and Raman spectroscopy, mass spectrometry, and electrochemical techniques. Newer developments in gas chromatography and high performance liquid chromatography methods are also discussed. One recent trend that is discussed is an emphasis on field measurements through the use of portable instruments or portable assay formats. An increase in the use of infrared spectroscopy and mass spectrometry for PBE analysis is also noted. The analysis of triacetone triperoxide has been the focus in the development of many of these methods, although hexamethylene triperoxide diamine has received increased attention in PBE detection during the last few years.     

Luminescence-based methods for sensing and detection of explosives

The detection of explosives and related compounds is important in both forensic and environmental applications. Luminescence-based methods have been widely used for detecting explosives and their degradation products in complex matrices. Direct detection methods utilize the inherent fluorescence of explosive molecules or the luminescence generated from chemical reactions. Direct detection methods include high-energy excitation techniques such as gamma-ray and x-ray fluorescence, detection of decomposition products by fluorescence or chemiluminescence, and detection following reduction to amines or another reaction to produce fluorescent products from the explosive. Indirect detection methods utilize the interference caused by the presence of explosive compounds with traditional processes of fluorescence and fluorescence quenching. Indirect detection methods include quenching of solution-phase, immobilized, and solid-state fluorophores, displacement of fluorophores, fluorescence immunoassay, and reactions that produce fluorescent products other than the explosive. A comprehensive review of these methods is presented.     

Solid-phase microextraction coupled to gas chromatography for the determination of 2,3-dimethyl-2,3-dinitrobutane as a marking agent for explosives

This paper investigates the detection of 2,3-dimethyl-2,3-dinitrobutane (DMNB), a marking agent in explosives, by gas chromatography (GC) with electron capture detection using solid-phase microextraction (SPME) as a sample preparation technique. The 25,27-dihydroxy-26,28-oxy (2′,7′-dioxo-3′,6′-diazaoctyl) oxy-p-tert-butylcalix[4]arene/hydroxy-terminated silicone oil coated fiber was highly sensitive to trap DMNB from ammonium nitrate matrix. The analysis was performed by extracting 2 g of explosives for 30 s at room temperature and then immediately introducing into the heated GC injector for 1 min of thermal desorption. The method showed good linearity in the range from 0.01 to 1.0 μg/g. The relative standard deviations for these extractions were <8%. The calculated limit of detection for DMNB (S/N = 3) was 4.43 × 10⁻⁴ μg/g, which illustrates that the proposed systems are suitable for explosive detection at trace level. This is the first report of an SPME-GC system shown to extract marking agent in explosives for subsequent detection in a simple, rapid, sensitive, and inexpensive manner.     

A field test for the detection of peroxide-based explosives

A rapid and simple field test for the detection of triacetone-triperoxide (TATP) and hexamethylenetriperoxidediamine (HMTD), two explosives which find significant illegal use, has been developed. Unknown samples are first treated with a catalase solution to remove hydrogen peroxide traces, in order to provide selectivity towards peroxide-based bleaching agents which are contained in commercial laundry detergents. Subsequently, the peroxide-based explosives are decomposed via UV irradiation, thus yielding hydrogen peroxide, which is determined by the horseradish peroxidase (POD) catalysed formation of the green radical cation of 2,2'-azino-bis(3-ethylbenzothiazoline)-6-sulfonate (ABTS). The limits of detection for this method are 8 x 10(-6) mol dm(-3) for TATP and 8 x 10(-7) mol dm(-3) for HMTD, respectively. As an option, p-hydroxyphenylacetic acid (pHPAA) may be used as peroxidase substrate, resulting in lower limits of detection (8 x 10(-7) mol dm(-3) for TATP and HMTD). The complete method uses a mobile setup to be applied under field conditions.     

翻译后修饰蛋白质组学分离方法的研究进展

蛋白质翻译后修饰（PTMs）是调节细胞内生理活动的重要途径。该文总结了近年来PTMs蛋白质组学相关的分离方法,包括反相（RP）色谱法、离子交换（IEX）色谱法、亲水相互作用色谱（HILIC）法、多孔石墨化碳（PGC）色谱法、毛细管电泳（CE）法及分子筛色谱（SEC）法等。这些新方法为磷酸化、乙酰化、糖基化等PTM肽段或蛋白质的鉴定提供了更高的分离度和灵敏度。此外,该文也介绍了蛋白质领域其他重要分离方法的研究进展,这些方法可能被进一步应用于PTMs蛋白质组学的研究中。     

Optimisation of post-column reaction detector for HPLC of explosives

Summary Improvements in selectivity and sensitivity in the analysis of common explosives, like nitrate esters, nitramines and nitroaromatic compounds can be achieved by post-column derivatisation in a two step reaction detector. The first step in derivatisation is the photolysis of the analytes with UV at 254 nm. The photo reactor consists of a crocheted 20 m Tefzel capillary, which is coiled around a low pressure mercury lamp. In second step the nitrite ion generated is subsequently detected by a colourimetric reaction. The azo dye formed can be selectively detected at 540 nm.Addition of alkali after chromatographic separation to prevent oxidation of initially formed nitrite to nitrate during photolysis leads to a complex multistage arrangement. However, the contribution to peak broadening by the reactor is negligible and it is possible to detect 25–50 ppb of nitramines and 30–100 ppb of nitrate esters. Another advantage of the method is the selective detection of nitro compounds, even in complex matrices.The trace analysis of explosives is of growing interest in forensic science as well as in environmental analysis. It has been shown [1] that explosives can easily be extracted from soil and debris by the use of supercritical carbon dioxide. The separation and determination of explosives by gas chromatography is hindered by their thermal instability. In HPLC only the nitro aromatic explosives can be detected with sufficient sensitivity. Other types of explosives like the esters of nitric acid or nitramines do not absorb sufficiently in the UV region for sensitive detection. It has been shown [2] that explosives are liable to photochemical decomposition in the UV region, resulting in nitrate and nitrite, which have been detected after separation by ion-pair chromatography with electrochemical detection. A more sensitive and selective detection of nitrite has been possible in flow injection analysis [3]. Here a modified Griess reaction has been used. In a first step nitrite ions are used to form the diazonium salt with sulfanilamide which is coupled in a second step with N-[naphthyl-(1)]-ethylene diamine (NED) to form a redviolet azo dye with an absorption maximum at 540 nm. The advantage of this method is selective detection in the visible region, where hardly any other organic components are detected, which might be present in a crude environmental sample.In this paper the transfer of the Griess reaction to post-column derivatisation in RP chromatography of explosives will be described, and the optimisation of trace analysis of these solutes will be discussed.     

Micellar extraction and high performance liquid chromatography-ultra violet determination of some explosives in water samples

An analytical method based on the cloud point extraction combined with high performance liquid chromatography is used for the extraction, separation and determination of four explosives; octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazine (HMX), hexahydro-1,3,5-trinitro-1,3,5-triazine (RDX), 2,4,6-trinitrotoluene (TNT) and pentaerythritol tetranitrate (PETN). These compounds are extracted by using of Triton X-114 and cetyl-trimethyl ammonium bromide (CTAB). After extraction, the samples were analyzed using a HPLC-UV system. The parameters affecting extraction efficiency (such as Triton X-114 and CTAB concentrations, amount of Na₂SO₄, temperature, incubation and centrifuge times) were evaluated and optimized. Under the optimum conditions, the preconcentration factor was 40 and the improvement factors of 34, 29, 61 and 42 with detection limits of 0.09, 0.14, 0.08 and 0.40 (μg L⁻¹) were obtained for HMX, RDX, TNT and PETN, respectively. The proposed method was successfully applied to the determination of these compounds in water samples and showed recovery percentages of 97-102% with RSD values of 2.13-4.92%.     

Sensitive capillary electrophoresis microchip determination of trinitroaromatic explosives in nonaqueous electrolyte following solid phase extraction

A capillary electrophoresis (CE) microchip is utilized for the sensitive separation and detection of three trinitroaromatic explosives: 1,3,5-trinitrotoluene (TNT), 1,3,5-trinitrobenzene (TNB) and 2,4,6-trinitrophenyl-N-methylnitramine (tetryl), in the presence of 10 other explosives and explosive derivatives in nonaqueous electrolyte (acetonitrile/methanol 87.5/12.5 (v/v), 2.5 mM NaOH, 1 mM sodium dodecyl sulfate (SDS)). The chemical reaction of bases, e.g. hydroxide or methoxide ions, with trinitroaromatic compounds forms red colored derivatives that can be easily detected using a green light emitting diode (LED) on the microchip. Two surfactants bearing opposite charge, cetyltrimethylammonium bromide (CTAB) and SDS are compared with respect to their effect on separation times, detection limits and resolving powers for separating these explosives. All microchip separations were achieved in <20 s. In the absence of solid phase extraction (SPE), the detection limits obtained for the trinitroaromatic explosives were as follows: TNB, 60 μg/l; TNT, 160 μg/l and tetryl, 200 μg/l. By coupling the microchip separation with ex situ SPE, the detection limits for detecting these three explosives in seawater were lowered by 240 to more than 1000 times: TNB, 0.25 μg/l; TNT, 0.34 μg/l and tetryl, 0.19 μg/l.     

Coupled solid phase extraction–supercritical fluid extraction–on-line gas chromatography of explosives from water

A method has been developed for the quantitative extraction of nitrotoluenes (2,3-dinitrotoluene, 2,4-dinitrotoluene and trinitrotolugene) from water using a Bakerbond^TM phenyl sorbent. The average solid phase extraction recoveries for spiked standards ranged from 80 to 95 percent for reagent water and 52 to 95 percent from well and surface water in the low ppb and ppt levels. After the nitrotoluenes had been trapped on the solid sorbent they were quantitatively eluted using SFE. Adding toluene to the extraction cell increased the rate of extraction, but did not improve analyte recovery versus unmodified CO₂. The extracts were analyzed off-line with GC–ECD using an internal standard. Extraction losses were due to analyte breakthrough, and not from poor SFE recoveries. This demonstrates that supercritical fluid extraction is a suitable elution technique for analytes trapped on solid phase extraction sorbents. Also, a method for the direct on-line coupling of SPE to GC, using SFE, has been developed and evaluated. Supercritical CO₂ is ideal for directly coupling SPE to GC, since carbon dioxide is a gas under ambient conditions. One potential problem of on-line SPE–SFE–GC is the presence of residual water trapped on the active sites of the Bakerbond¹³ phenyl sorbent. This problem was dealt with by using a split interface previously described by Hawthorne. From the results of this study, the relative standard deviation of the on-line SPE–SFE–GC interface was determined to be between 4 and 10 percent. In addition, there was no significant difference in the precision of the method with or without the use of an internal standard. A calibration curve was also constructed (r² = 0.995) from spiked controls, demonstrating that the method is quantitative.     

Double pulse laser-induced breakdown spectroscopy of explosives: Initial study towards improved discrimination

Detecting trace explosive residues at standoff distances in real-time is a difficult problem. One method ideally suited for real-time standoff detection is laser-induced breakdown spectroscopy (LIBS). However, atmospheric oxygen and nitrogen contributes to the LIBS signal from the oxygen- and nitrogen-containing explosive compounds, complicating the discrimination of explosives from other organic materials. While bathing the sample in an inert gas will remove atmospheric oxygen and nitrogen interference, it cannot practically be applied for standoff LIBS. Alternatively, we have investigated the potential of double pulse LIBS to improve the discrimination of explosives by diminishing the contribution of atmospheric oxygen and nitrogen to the LIBS signal. These initial studies compare the close-contact (< 1 m) LIBS spectra of explosives using single pulse LIBS in argon with double pulse LIBS in atmosphere. We have demonstrated improved discrimination of an explosive and an organic interferent using double pulse LIBS to reduce the air entrained in the analytical plasma.     

常见炸药的稳定同位素比值分析方法研究进展

炸药的深度比对与溯源对于爆炸案事件的侦破具有重大意义,以不同地域来源的原料或不同生产工艺生产的炸药,其组成元素的稳定同位素比值具有差异,因而稳定同位素比值可作为炸药深度比对与溯源的重要指标.稳定同位素比值质谱法(IRMS)作为一种高精度的稳定同位素比值测量手段,已逐渐发展成熟,与元素分析仪、气相色谱仪、液相色谱仪等仪器...     

Comparison of extraction techniques for the isolation of explosives and their degradation products from soil

A comparison of four extraction techniques used for the isolation of 14 explosive compounds (Method 8330-Explosives) from spiked soil samples is described. Soxhlet warm extraction (SWE), pressurized solvent extraction (PSE), microwave assisted extraction (MAE) and supercritical fluid extraction (SFE) were included. The effects of basic extraction conditions – i.e. type of extraction solvent, temperature, pressure, and extraction time – were investigated. The best extraction recovery of the monitored compounds from spiked soil was obtained using pressurized solvent extraction. Recoveries of explosives using the PSE technique were in the range from 65 to 112%. Extraction recoveries by Soxhlet warm extraction and supercritical fluid extraction reached 65–99% and 52–75%, respectively. The lowest extraction recoveries (28–65%) were obtained using microwave assisted extraction. A very low extraction recovery for tetryl was observed in all cases but the best results were achieved by pressurized solvent extraction (58%).     

Identification of dominant odor chemicals emanating from explosives for use in developing optimal training aid combinations and mimics for canine detection

Despite the recent surge in the publication of novel instrumental sensors for explosives detection, canines are still widely regarded as one of the most effective real-time field method of explosives detection. In the work presented, headspace analysis is performed by solid phase microextraction (SPME)/gas chromatography-mass spectrometry (GC-MS), and gas chromatography-electron capture detection (GC-ECD), and used to identify dominant explosive odor chemicals seen at room temperature. The activity of the odor chemicals detected was determined through field trials using certified law enforcement explosives detection canines. A chemical is considered an active explosive odor when a trained and certified explosives detection canine alerts to a sample containing that target chemical (with the required controls in place). A sample to which the canine does not alert may be considered an inactive odor, but it should be noted that an inactive odor might still have the potential to enhance an active odor's effect. The results presented indicate that TNT and cast explosives share a common odor signature, and the same may be said for plasticized explosives such as Composition 4 (C-4) and Detasheet. Conversely, smokeless powders may be demonstrated not to share common odors. The implications of these results on the optimal selection of canine training aids are discussed.     

胰岛素样生长因子-I分析方法的新进展

介绍了检测胰岛素样生长因子-I(IGF-I)的各种样品前处理手段、IGF-I的标记方法,以及通过免疫分析、色谱以及色谱-质谱联用技术、表面等离子体共振(SPR)传感器等方法定量检测IGF-I的最新进展。     

High-performance liquid chromatographic analysis with electrochemical detection for residues of explosives in water samples around a former ammunition plant

Electrochemical detection (ED) in the oxidative and reductive mode was applied to the analysis of nitroaromatics, nitramines, aminoaromatics and nitrophenols in groundwater samples from the surroundings of a former ammunition plant. Settings for working potential and eluent composition were optimized in terms of detection limit, linearity and selectivity. The results were compared with those obtained by UV detection and the advantages of combined UV-ED detection for the analysis of complex samples are shown.     

Development of an indirect competitive ELISA for the determination of papaverine

Papaverine (1-(3,4-dimethoxybenzyl)-6,7-dimethoxyisoquinoline, PAP) is a member of the benzylisoquinoline sub-group of the opium alkaloids. It has been widely used for treating diseases like pulmonary arterial embolism and renal or biliary colic. In this paper, a specific conjugate of mono-demethylated papaverine-O-carboxylmethyl ether (MDMPAP-O-CME) and bovine serum albumin (BSA) was synthesized and used as the complete antigen (PAP-BSA), with which we successfully obtained a high-titer anti-PAP polyclonal antibody (pAb) by immunization of rabbits. The anti-PAP pAb showed high affinity to papaverine with an affinity constant (K_aff) of 7.3 × 10⁷ L/mol. With this antibody, we established a sensitive immunochemical method for the determination of papaverine based on indirect competitive enzyme-linked immunosorbent assay (ELISA). The optimal concentrations of the coated antigen (PAP-OVA) and purified pAb used in the ELISA were 5 and 1.2 μg/mL, respectively. The cross reactivity of other benzylisoquinoline derived substances, including 1-(3,4-dihydroxybenzyl)-7-hydroxy-6-methoxy-isoquinoline (6-methoxy-papaveroline, MPAPO), morphine (MP) and codeine (CD) were all lower than 1%. The linear range of the calibration curve was 0.1-1000 ng/mL. Normal human serum samples were spiked with known amount of papaverine and measured by the ELISA. Recoveries were between 102% and 105%. Papaverine content in a commercial papaverine hydrochloride injection sample was also determined using the established ELISA. Compared with the results given by the control experiment of HPLC, the recoveries of ELISA to detect injection samples were 102-110%. The limits of detection for synthetic serum samples and injection samples of papaverine hydrochloride were 0.25 and 0.06 ng/mL, respectively.     

Recent progress in numerical methods for the determination of thermokinetics

The results of a multinational concerted programme on the determination of thermokinetics are presented. The purpose of the programme was to compare different numerical methods which have been independently proposed for the determination of thermokinetics from experimental calorimetric data. To achieve this end, the same experimental data, obtained from two heat-flow calorimeters, were distributed and successively analyzed by the different methods. Numerical methods based on the state function theory, on Fourier transform analysis, on dynamic optimization and on a simple differentiation of the data were thus critically tested.

---

Zusammenfassung Es wurden die Ergebnisse der gemeinsamen Arbeiten über die Bestimmung der Thermokinetik mit 4 numerischen Methoden (dynamische Optimalisierung, Methode der Zustandfunktionen, harmonische Analyse und umgekehrte Korrektion) vorgestellt. Die experimentellen Daten wurden mit Hilfe von 2 Kalorimetern mit einer konstanten Temperatur des Isoliermantels ermittelt. Die Durchführung der Versuche ermöglichte ein Vergleich der angewandten Methoden.

---

Résumé Les résultats d'un programme de recherches concerté multinational sur la détermination des données thermocinétiques sont présentés. Le but du programme était de comparer différentes méthodes numériques proposées indépendamment pour la détermination des données thermocinétiques à partir des mesures calorimétriques expérimentales. Pour celà, les mêmes données expérimentales fournies par deux calorimètres à flux de chaleur ont été distribué es et analysées successivement par 4 méthodes: utilisation des variables d'état, analyse de la transformée de Fourier, optimalisation dynamique et simple différentiation des données.

---

. , . , , . , , , .

     

KMnO4-OP Chemiluminescence system for FIA determination of hydrogen peroxide

A fast and simple KMnO₄-OP chemiluminescence system for flow-injection analysis of hydrogen peroxide is described. When a mixture of sample and OP is injected into acidic KMnO₄, solution in a flow-cell, strong chemiluminescence occurs. The response is linear to the concentration of hydrogen peroxide in the range of 1.0 × 10^–8 to 6.0 × 10^–5 mol/l with 0.1 mol/l permanganate, and the upper limit of linear response could be extended to 6 × 10^–3 mol/l by increasing the permanganate concentration. The relative standard deviation of the method is between 1.6 and 2.3%. The detection limit is 6.0 × 10^–9 mol/l. This method is suitable for automatic and continuous analysis and has been successfully tested for determination of hydrogen peroxide in rain water. The chemiluminescence intensity was found to be remarkably enhanced in the presence of the OP micellar system.