Supramolecular assemblies of a new series of gemini-type schiff base amphiphiles at the air/water interface: in situ coordination, interfacial nanoarchitectures, and spacer effect

Great interest has been devoted to the gemini amphiphiles because of their unique properties. In this article, we report some interesting properties of the interfacial films formed by a series of newly designed gemini amphiphiles containing the Schiff base moiety. This novel series of gemini amphiphiles with their Schiff base headgroups linked by a hydrophobic alkyl spacer (BisSBC18Cn, n = 2, 4, 6, 8, 10) could be spread to form stable monolayers and coordinated with Cu(Ac)(2) in situ in the monolayer. The alkyl spacer in the amphiphiles has a great effect on the regulation of the properties of the Langmuir monolayers. A maximum limiting molecular area was observed for the monolayers of the gemini amphiphile with the spacer length of hexa- or octamethylene groups. Both the monolayers on water and on the aqueous Cu(Ac)(2) subphase were transferred onto solid substrates, and different morphologies were observed for films with different spacers. Nanonail and tapelike morphologies were observed for amphiphile films with shorter spacers (n = 2 and 4) on the water surface. Wormlike morphologies were observed for gemini films with longer spacers of C(8) and C(10) when coordinated with Cu(Ac)(2). An interdigitated layer structure was supposed to form in the multilayer films transferred from water or the aqueous Cu(Ac)(2) subphase.     

Simulations of a lattice model of two-headed linear amphiphiles: influence of amphiphile asymmetry

Using a 2D lattice model, we conduct Monte Carlo simulations of micellar aggregation of linear-chain amphiphiles having two solvophilic head groups. In the context of this simple model, we quantify how the amphiphile architecture influences the critical micelle concentration (CMC), with a particular focus on the role of the asymmetry of the amphiphile structure. Accordingly, we study all possible arrangements of the head groups along amphiphile chains of fixed length N = 12 and 16 molecular units. This set of idealized amphiphile architectures approximates many cases of symmetric and asymmetric gemini surfactants, double-headed surfactants, and boloform surfactants. Consistent with earlier results, we find that the number of spacer units s separating the heads has a significant influence on the CMC, with the CMC increasing with s for s < N/2. In comparison, the influence of the asymmetry of the chain architecture on the CMC is much weaker, as is also found experimentally.     

Spacer-controlled aggregation and surface morphology of a selenacarbocyanine dye on gemini monolayers

The adsorption and aggregation of a selenacarbocyanine dye (3,3-disulfopropyl-9-methyl-selenacarbocyanine, SeCy) onto Langmuir monolayers of a series of gemini amphiphiles with different methylene spacers were investigated. When the monolayers of the gemini amphiphiles were spread on the dye-containing subphase, the dye could be easily adsorbed and aggregated onto the monolayers through the electrostatic and pi-pi interaction. The dye formed complexes with gemini amphiphiles and stacked as J-aggregates in all the transferred multilayers, regardless of the structure of gemini amphiphiles. However, the surface morphologies of the complex monolayers showed a significant dependence on the spacer length of the gemini amphiphiles and the temperature of the subphase. Nanorods were observed for the complex films with spacer lengths ranged from 4 to 10 methylenes. With the temperature of the subphases increased from 20 degrees C to 30 degrees C, aligned longer nanofibers were formed instead. Although both the gemini amphiphiles and the dye were achiral, strong circular dichroism (CD) signals were observed for the transferred complex films. However, the CD signals could be just opposite in different places of the transferred films, suggesting that a resolved enantiomeric micro/nanostructure coexisted in the films. On the other hand, for the complex film of the dye with the gemini amphiphile of two methylenes spacer, neither CD signal nor ordered surface morphologies were detected in any place of the film although the dye itself stilled formed J-aggregate in the film. It was suggested that regular nanoarchitectures and resolved chiral domains could be observed only when the spacer of gemini amphiphiles is comparative to the distance between the two SO3- groups in the dye.     

Double-helical dinuclear bis(dipyrromethene) complexes formed by self-assembly

Bis(dipyrromethene) ligands linked by an alkyl spacer between beta and beta' positions are shown to give helical dimers or monomers, dependent upon the length of the alkyl linker, upon complexation. Ligands consisting of methylene, ethylene, and propylene linkers -(CH(2))(n)()- (n = 1, 2, and 3) give helical dimers, while longer linking chains (n = 4, 5, or 6) give monomers or mixtures of dimers and monomers. X-ray crystal structures of the dimeric zinc complexes (n = 1, 2, and 3) reveal that the angles between dipyrromethene planes and the extent of helicity in the complexes differ as the length of the linker varies. The extent of helicity was assessed and found to be dependent upon the length and, specifically, the conformational preferences of the alkyl spacer unit. The presence of an ethylene linker gave complexes of greatest helicity. The use of a methylene spacer gave less helical structures upon complexation, while propylene spacers gave only slightly helical complexes. Our studies identify the crucial importance that the conformational preferences of the beta-beta' alkyl spacer group plays in the coordination algorithm of self-assembly to form dipyrromethene based complexes.     

Synthesis and properties of cationic oligomeric surfactants

Three series of new oligomeric cationic surfactants were synthesized. These amphiphiles are trimeric and tetrameric oligomeric quaternary ammonium chlorides, with spacer groups of different lengths separating the individual surfactant fragments. The properties of the compounds, such as Krafft temperatures, surface activity, micellization, viscosifying effects, foaming and solubilizing capacity, are studied. The influence of the degree of oligomerization and of the spacer group on the surfactant properties is discussed, in comparison with the analogous standard monomeric and dimeric ("gemini") surfactants. Typically, the evolution of the properties observed from standard to dimeric surfactants progresses with the trimers and tetramers, resulting for instance in extremely low critical micellization concentrations.     

Surface tension study of cationic gemini surfactants binding to DNA

Binding of cationic gemini surfactants alkanediyl-a-ω-bis(dimethyldodecylammonium bromides) with variable polymethylene spacer length ranging from 2 to 12 methylene groups to DNA in NaBr solution is investigated utilizing the tensiometry method. A simple method is presented for calculating the number of surfactant molecules bound to DNA. The results are evaluated in terms of the gemini surfactant spacer length, showing that gemini molecules with either short spacers (2 methylene groups) or long spacers are most efficiently adsorbed to DNA. A weak adsorption to DNA was found for gemini molecules with a medium spacer length (6 methylene groups in the spacer). The binding properties of cationic gemini surfactants as a function of spacer length are consistent with the results obtained by other experimental methods (dynamic light scattering measurements, fluorescence spectroscopy), indicating identical adsorption behaviour of gemini molecules as a function of the spacer length.      

Kinetic investigations on the alkaline hydrolysis of tris-(1,10-phenenthroline)Fe(II) with guar gum–surfactant interactions

The kinetic investigations on the alkaline hydrolysis of tris-(1,10–phenanthroline)iron(II) has been explored spectrophotometrically in microheterogeneous environment at 301?K and ionic strength of 0.13?mol?L^?1. Guar gum, cationic amphiphiles, and their mixtures are used as the reaction environments to carry out the reaction. Guar gum decreases the rate of reaction, which indicates that Fe(II) complex may be trapped in the hydrophobic region of gum. Cationic amphiphile decreases the rate in the presence of guar gum. The extent of interaction between guar gum and amphiphile increases with the hydrophobic carbon chain length. The critical aggregation concentration (CAC) and critical micelle concentration (CMC) of the amphiphiles (cetyl trimenthyl ammonium bromide (CTAB), tetradecyl trimenthyl ammonium bromide (TTAB), dodecyl trimenthyl ammonium bromide (DTAB)) in the presence of guar gum have been determined with conductometry and tensiometry. All observations support either weak or strong interaction of cationic amphiphiles with guar gum. Activation parameters of the reaction in different environments have been determined which corroborate the rate data.     

Interfacial assembly of a series of cinnamoyl-containing bolaamphiphiles: spacer-controlled packing, photochemistry, and odd-even effect

A series of bolaamphiphiles with 4-hydroxycinnamoyl head groups and different length of the alkyl spacers (n = 6-12) were designed to investigate their photochemistry in the organized films obtained from the air/water interface. It has been found that both the length and odd-even number of the spacers can finely tune the molecular packing as well as the photochemistry. When the spacer length was changed from 6 to 12 methylene units, the assemblies changed from J aggregate to H aggregate. The molecules with even-numbered polymethylene spacer tend to form three-dimensional nanorod structure at the air/water interface. For the assembly of derivatives with odd-numbered spacers, diverse morphologies such as nanospirals and nanofibers were observed depending on the chain length and the surface pressures. The different packing of bolaamphiphiles could subsequently affect the photochemistry of the cinnamoyl groups in the organized films. The spacer effect in the assembly can be understood from the cooperation between H-bond of the phenolic hydroxyl and the amide groups, π-π stacking as well as the hydrophobic interactions of the alkyl spacer. A packing model was proposed to explain the phenomenon.     

Lyotropic smectic layering of side-on polysoaps in water

 The synthesis and characterization of lyotropic smectic amphiphilic side-on polymers are described. The amphiphile consists of a rigid, aromatic core with two terminal ethyleneoxide chains of various lengths and is laterally attached to a polysiloxane backbone; the length of the spacer has also been varied. The phase behavior of the monomeric amphiphiles and side-on polymers are determined by polarizing microscopy and ²H-NMR measurements. In water, most of the low molecular weight surfactants show restricted lyotropic properties, namely lyotropic smectic phases. The packing restriction of the amphiphiles is due to their geometric anisometry. All side-on polymers exhibit only lyotropic smectic phases. The phase regime of the polymer mesophase with respect to the monomers depends on the spacer length. In contrast to surfactants having a flexible hydrophobic group, these amphiphiles align spontaneously parallel to an external magnetic field, leading to perfect lyotropic smectic monodomains. Received: 21 May 2001 Accepted: 27 August 2001     

单链2,7-取代萘刚性生色基双亲化合物的合成及其在稀溶液中的自组织

合成了系列单链含2,7-取代萘刚性生色基的双亲化合物C_nNaph(2,7)C₆N⁺(n=4,7,10,12,16),分别用透射电镜、¹HNMR和DSC观测了该系列双亲物在稀溶液中的聚集形态,研究了聚集体内的分子运动和凝胶态到液晶态的相变.结果表明,当尾链n≥7时,该系列化合物在稀溶液中自组织成双分子层排列的囊泡,当n=4时聚集体无确定形态.     

Investigation in monolayers of double-chain fluorocarbon amphiphiles Effect of headgroups on molecular packing and interaction between hydrocarbon and fluorocarbon monolayers

The surface pressure-area diagrams of double-chain fluorocarbon amphiphiles with different headgroup compositions show that the amphiphiles arrange almost perpendicularly to the water subphase and the structure of headgroups exerts significant influence on the amphiphile packing. Strong hydrogen bonding and weak electrostatic interaction favor the formation of stable monolayers. Perfluorooctanoic acid (FOA) cannot form monolayer at water/air interface and can only form liquid monolayer in subphase of calcium nitrate solution. Complete phase separation of palmitic acid and a fluorocarbon amphiphile with shorter hydrocarbon spacer group, 1, could be demonstrated in monolayers by using the phase rule of Crisp. The creation of phase-separated monolayers is possible when the monolayer is composed of a mixture of palmitic acid and a fluorocarbon amphiphile with longer hydrocarbon spacer group, 2. It can be suggested that the miscibility of hydrocarbon amphiphiles with fluorocarbon amphiphiles is determined by the hydrocarbon fraction of fluorocarbon amphiphiles.     

Regulation of aggregation and morphology of cyanine dyes on monolayers via gemini amphiphiles

The aggregation of dyes is of considerable importance in relating to their functions and applications. In this paper, we have investigated the regulation on the aggregation and morphology of two cyanine dyes, 3,3'-disulfopropyl-4,5,4',5'-dibenzo-9-methylthiacarbocyanine triethylammonium salt (MTC) and 3,3'-disulfopropyl-4,5,4',5'-dibenzo-9-phenylthiacarbocyanine triethylammonium salt (PTC), using a series of gemini amphiphiles (bis(2'-heptadecyl-3'-ethylimidazolium)-1,n-alkane dibromide, abbreviated as Gn, n=2, 4, 6, 8, 10). It has been found that both of the dyes could be adsorbed onto the monolayers of the gemini amphiphiles through the electrostatic and pi-pi interaction and stacked into H- or J-aggregate. The spacer of the gemini amphiphile showed good control over the aggregation of MTC: H-aggregate was favored when gemini amphiphiles with short spacer were applied, while J-aggregation was preferred in the case of longer spacer. Only J-aggregate was observed for PTC on gemini monolayer, regardless of the structure of the gemini amphiphiles. Interesting morphologies were observed for all the gemini/dye complex monolayers. Network structure and nanofibers were formed for the gemini/MTC films transferred below the plateau surface pressure and close to the collapse pressure, respectively. The ability of the complex monolayers to form nanofibers strongly depended on the component amphiphiles, G2>G4>G6, and no nanofibers were observed for G8/MTC and G10/MTC after the collapse. Only squared domains were observed for gemini/PTC monolayers. When both G2 and G10 were mixed, an individual control of the gemini amphiphiles over the aggregation of MTC in the complex monolayers was observed. The relationship among the spacer, dye structure, and aggregation was revealed.     

Odd-even chain length-dependent order in pH-switchable self-assembled layers

The reversible self-assembly of a series of bipolar amphiphiles, alpha,omega-bis(3- or 4-amidinophenoxy)alkanes (chain length n = 5-12), on mercaptoalkanoic acid-functionalized gold surfaces (chain length n = 10, 11, 14, 15) has been studied by in-situ ellipsometry, IR reflection absorption spectroscopy (IRAS), and atomic force microscopy (AFM). The layer order, amphiphile orientation, and tendency to form bilayers depends on the position of the amidine substituent, the alkyl chain length of both the amidine amphiphile and the underlying acid self-assembled monolayer (SAM), and whether the amidine alkyl chain contained an even or odd number of methylene groups. Thus, para-substituted bisbenzamidines containing more than six methylene groups (n>6) and with an odd number (n = 7, 9, 11) tended to form bilayered structures, whereas those containing an even number formed monolayers when adsorbed on SAMs of the long-chain acids (n = 14, 15). This behavior also correlated with the average tilt angle of the benzene moieties of the amphiphiles, as estimated by IRAS. The odd-numbered chains gave lower tilt angles than the even-numbered ones, and a possible model that accounts for these results is proposed. IRAS also revealed a higher order of the odd-numbered chains and an increasing hydrogen-bonding contribution with increasing chain length. Additional evidence for the proposed bilayered assemblies and their reversibility was obtained by AFM. Images obtained from the assembly of decamidine on a SAM of mercaptohexadecanoic acid in a pH 9 borate buffer revealed domains of similar size to that of the underlying acid SAM (20-30 nm), but less densely packed. By acidifying the solution, the second layer was destabilized and a very smooth layer with few defects appeared. Further acidification to pH 3 also destabilized the first layer.     

Guanidinylated Amphiphilic Polycarbonates with Enhanced Antimicrobial Activity by Extending the Length of the Spacer Arm and Micelle Self‐Assembly

Nine guanidinylated amphiphilic polycarbonates are rationally designed and synthesized. Each polymer has the same biodegradable backbone but different side groups. The influence of the hydrophobic/hydrophilic effect on antimicrobial activities and cytotoxicity is systematically investigated. The results verify that tuning the length of the spacer arm between the cationic guanidine group and the polycarbonate backbone is an efficient design strategy to alter the hydrophobic/hydrophilic balance without changing the cationic charge density. A spacer arm of six methylene units (CH₂)₆ shows the best antimicrobial activity (minimum inhibitory concentration, MIC = 40 µg mL^?1 against Escherichia coli, MIC = 20 µg mL^?1 against Staphylococcus aureus, MIC = 40 µg mL^?1 against Candida albicans) with low hemolytic activity (HC₅₀ > 2560 µg mL^?1). Furthermore, the guanidinylated polycarbonates exhibit the ability to self‐assemble and present micelle‐like nanostructure due to their intrinsic amphiphilic macromolecular structure. Transmission electron microscopy and dynamic light scattering measurements confirm polymer micelle formation in aqueous solution with sizes ranging from 82 to 288 nm.     

A Polyaromatic Gemini Amphiphile That Assembles into a Well‐Defined Aromatic Micelle with Higher Stability and Host Functions

A gemini‐type amphiphilic molecule, constituted of two V‐shaped polyaromatic amphiphiles linked by a linear acetylene spacer, was synthesized. The gemini amphiphile assembles into a well‐defined aromatic micelle (ca. 2 nm in core diameter), providing higher stability in water even at low concentration (0.09 mm ) and high temperature (>130 °C). Unlike common gemini amphiphiles with aliphatic chains, the present amphiphile and its micellar assembly emit green and orange fluorescence (Φ_F=33 and 9 %), respectively. Despite strong and multiple π‐stacks of the polyaromatic panels of the amphiphiles, the water‐soluble gemini aromatic micelle incorporates medium‐size to large hydrophobic compounds into the frameworks. Interestingly, the guest binding capability toward large planar molecules was enhanced by more than two times through the pre‐encapsulation of spherical molecules in the cavity.     

Star-shaped trimeric quaternary ammonium bromide surfactants: adsorption and aggregation properties

Novel star-shaped trimeric surfactants consisting of three quaternary ammonium surfactants linked to a tris(2-aminoethyl)amine core were synthesized. Each ammonium had two methyls and a straight alkyl chain of 8, 10, 12, or 14 carbons. The adsorption and aggregation properties of these tris(N-alkyl-N,N-dimethyl-2-ammoniumethyl)amine bromides (3C(n)trisQ, in which n represents alkyl chain carbon number) were characterized by equilibrium and dynamic surface tension, rheology, small-angle neutron scattering (SANS), and cryogenic transmission electron microscopy (cryo-TEM) techniques. 3C(n)trisQ showed critical micelle concentrations (CMC) 1 order of magnitude lower than that of the corresponding gemini surfactants with an ethylene spacer and the corresponding monomeric surfactants. The logarithm of the CMC decreased linearly with increasing hydrocarbon chain length for 3C(n)trisQ. The slope of the line, which is well-known as Klevens equation, was larger than those of the monomeric and gemini surfactants; however, considering the total carbon number in the chains, the slope was shallower than the monomeric and was close to the gemini. Through the results such as surface tensions at the CMC (32-34 mN m(-1)) and the parameters of standard free energy, CMC/C(20) and pC(20), it was found that 3C(n)trisQ could adsorb densely at the air/water interface despite the strong electrostatic repulsion between multiple quaternary ammonium headgroups. Moreover, dynamic surface tension measurements showed that the kinetics of adsorption for 3C(n)trisQ to the air/water interface was slow because of their bulky structures. Furthermore, the results of rheology, SANS, and cryo-TEM determined that 3C(n)trisQ with n = 10 and 12 formed ellipsoidal micelles at low concentrations in solution and the structures transformed to threadlike micelles with very few branches for n = 12 as the concentration increased, but for n = 14 threadlike micelles formed at relatively low concentrations.     

Molecular design of antimicrobial conjugated oligoelectrolytes with enhanced selectivity toward bacterial cells

A series of cationic conjugated oligoelectrolytes (COEs) was designed to understand how variations in molecular dimensions impact the relative activity against bacteria and mammalian cells. These COEs kept a consistent distyrylbenzene framework but differed in the length of linker between the core and the cationic site and the length of substitute on the quaternary ammonium functioned group. Their antimicrobial efficacy, mammalian cell cytotoxicity, hemolytic activity, and cell association were determined. We find that hydrophobicity is a factor that controls the degree of COE association to cells, but in vitro efficacy and cytotoxicity depend on more subtle structural features. COE2-3C-C4butyl was found to be the optimal structure with a minimum inhibitory concentration (MIC) of 4 μg mL⁻¹ against E. coli K12, low cytotoxicity against HepG2 cells and negligible hemolysis of red blood cells, even at 1024 μg mL⁻¹. A time-kill kinetics study of COE2-3C-C4butyl against E. coli K12 demonstrates bactericidal activity. These findings provide the first systematic investigation of how COEs may be modulated to achieve low mammalian cell cytotoxicity with the long-range perspective of finding candidates suitable for developing a broad-spectrum antimicrobial agent.

A series of cationic conjugated oligoelectrolytes (COEs) was designed to understand how variations in molecular dimensions impact the relative activity against bacteria and mammalian cells.     

Synthesis,physicochemical characterization,and self‐assembly of linear,dibranched, and miktoarm semifluorinated triphilic polymers

Linear, dibranched, and miktoarm amphiphiles containing both hydrophobic and fluorophilic moieties were synthesized and characterized in an attempt to elucidate the relationship between semifluorinated amphiphile structure and aggregate behavior in aqueous solution. For the linear and dibranched amphiphiles, there was an exponential decrease in critical aggregation concentration (CMC) and a logarithmic increase in core microviscosity with increasing length of the fluorocarbon segments; while the miktoarm architecture produced no notable trend in microviscosity or CMC. Furthermore, the linear and dibranched surfactants showed enhanced kinetic stability, dissociating more slowly in the presence of human serum than did either the dibranched or miktoarm amphiphiles. Finally, encapsulation studies with the hydrophobic drug paclitaxel (PTX) showed that the ability to solubilize and retain PTX increased with the presence and with the increasing size of the fluorocarbon moiety for both the linear and dibranched amphiphiles, while no such trend was observed for the miktoarm amphiphiles. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 3324–3336     

Charge-reversal amphiphiles for gene delivery

Delivering a missing gene or a functional substitute of a defective gene has the potential to revolutionize current medical care. Of the two gene delivery approaches, viral and synthetic vectors, synthetic cationic vectors possess several practical advantages but suffer from poor transfection efficiency. A new approach to gene delivery using charge-reversal amphiphiles is described. This synthetic vector transforms from a cationic to an anionic amphiphile intracellularly. This amphiphile performs two roles: first, it binds and then releases DNA, and second, as an anionic multicharged amphiphile, it destabilizes lipid bilayers. A charge-reversal amphiphile was synthesized and fully characterized, including the supramolecular complex it forms with DNA. Enhanced gene transfection was observed using these vectors compared to current cationic amphiphiles.     

Cholic acid-derived facial amphiphiles with different ionic characteristics

A cholate derivative with three epoxide groups was synthesized from cholic acid by allylation followed by epoxidation. Ring opening of the epoxides by various nucleophiles yielded facial amphiphiles with anionic, cationic, or nonionic functional groups. The critical micelle concentrations of these amphiphiles largely depend on the number of charged groups on the molecule. A facial amphiphile with pH-tunable micellization was prepared. Its aggregation behavior changes abruptly at pH = 7.6-6.6 as a result of protonation of its amino groups.