小分队视导:促进教师专业发展的新型教研方式

针对当前区域教研存在的问题,阐述了"小分队视导"这一新型教研方式的工作特点和以问题为核心、以课例为载体、以名师为示范、以反思为宗旨、以"教学新时空"为平台、以反馈为手段,来促进化学教师专业发展的实践与思考.     

辅酶催化安息香缩合反应的实验探讨

以苯甲醛为原料,以辅酶为催化剂和以四丁基溴化铵为相转移催化剂,经过安息香缩合反应制备二苯羟乙酮。     

基于真实情境下的悬疑探究——“常见酸式盐”复习课教学设计

以"常见酸式盐"复习课为素材,以分类观、离子反应和氧化还原理论为指导,以真实问题为背景,以实验探究为手段,为如何整理零散元素化合物知识及研究物质性质提供了范例。     

化工基础多媒体课件开发探讨

以建构主义学习理论为指导,以现代教育技术为手段,以实施学习环境设计为核心,以有效发挥学生学习的主动性、积极性、创造性和提高教学质量为目标,通过多媒体技术与现代教学模式、方法和思想的有机结合,开发以研究性教学为背景的化工基础多媒体课件,初步实现了化工基础课程教学方法和手段的创新以及教学过程和内容的优化。     

KAQ教育模式在“制药工艺学”教学中的应用

结合教学实践,介绍了以知识为基础、以能力为重心、以素质为标向的KAQ教育模式应用在"制药工艺学"教学实践中的具体做法和措施。     

以实验为基础的初中化学教学设计研究

以先进的教学理论为指导,以实验研究法为主,辅以调查法、文献资料法,通过以实验为基础的初中化学教学设计研究,构建了以实验为基础的初中化学教学设计框架,试验结果表明,学生的科学探究能力、创新精神和实践能力得到发展,突出了化学的学科特征。     

深化文管类化学课程的素质教育

以化学知识为基础,以社会热点问题为载体,以专题讲座为形式,通过开设实验课、组织课堂辩论、加强论文写作等措施,提高文管类学生对学习化学课程的兴趣,深化素质教育。     

铈及氟铈联用对CaHPO4·2H2O在水溶液中的转化产物的影响

以XRD和IR为表征手段,以恒pH法为溶解实验方法,研究了37℃下以铈单独处理和氟铈联用处理对二水磷酸氢钙(CaHPO4·     

以水、甲苯及其混合溶剂超临界萃取煤的研究

在半连续萃取装置上,以水、甲苯及其混合物为溶剂对黄县褐煤进行了非等温超临界萃取,考察了不同溶剂对萃取过程的影响。结果表明,以甲苯为溶剂的萃取率高于以水为溶剂的。以水为溶剂萃取物中的沥青烯和预沥青烯的H/C原子比高于以甲苯为溶剂的,而O/C原子比则低。在水中加入适量甲苯,能够明显改善萃取效果,大幅度提高萃取率。     

以环糊精为端基或核的大分子

综述了以环糊精为端基的线形大分子和以环糊精为核的星型大分子的合成技术及功能。现有研究表明其合成方法主要以可控/＂活性＂自由基聚合、活性阴离子聚合为主。以环糊精为端基和以环糊精为核的大分子作为一类功能型聚合物,兼具了环糊精分子与聚合物母体的功能及特点,可在一定条件下实现对客体分子的包合,增强生物相容性及高效的基因传递能力...     

表面等离子体子共振传感器用于研究不同材质包裹的磁性纳米粒子性质

利用自行设计组装的以白色发光二极管为光源的表面等离子体子共振传感器实验装置, 检测了不同材质包裹的磁性纳米粒子连接靶向DNA与生物素化DNA探针的结合程度. 结果表明, 与聚苯乙烯磁性微球连接的靶向DNA相比, Fe3O4@SiO2核壳式纳米微球连接的靶向DNA与生物素化的DNA探针结合速率较快, 且其相对标准偏差较小.     

N-去甲万古霉素的亲和吸附

通过交联聚丙烯酸甲酯与乙醇胺反应,形成聚(N-羟乙基丙烯酰胺)树脂,在酸催化作用下与环氧氯丙烷反应,形成含有α-羟基氯乙基的树脂.含α-羟基氯乙基的树脂与D-丙氨酸、L-丙氨酸或甘氨酸反应,分别得到含有这3种氨基酸的吸附剂.这3种吸附剂吸附N-去甲万古霉素的结果表明,含D-丙氨酸的吸附剂的吸附量最大,含甘氨酸的吸附剂的吸附量次之,而含L-丙氨酸的吸附剂不吸附N-去万古霉素.说明前两种吸附剂对N-去甲万古霉素存在亲和吸附作用.含D-丙氨酸吸附剂的最佳吸附pH值为5.8,当吸附液中的盐(NaCl)浓度增加时,吸附量降低.用0.4mol/LNa₂CO₃/CH₃CN(摩尔比7∶3,pH=9.5)作为洗脱剂可完全脱附被吸附的N-去甲万古霉素.     

乳腺癌术前灰阶超声与彩色多普勒超声联合应用对预后的预测价值

目的探究乳腺癌术前灰阶超声与彩色多普勒超声联合应用对预后的预测价值。方法选取温州医科大学附属第一医院2013年5月—2015年5月期间收治的乳腺癌患者83例,治疗前均行灰阶超声与彩色多普勒超声检查,分析患者超声检查结果、临床征象与术后随访2年期间患者预后的关系,从而分析术前灰阶超声与彩色多普勒超声联合应用对乳腺癌患者预后的预测价值。结果乳腺癌肿块边界清晰、边界不清晰、边界恶性晕的患者2年无瘤生存率依次降低,边界恶性晕与边界不清晰患者死亡率均显著高于边界清晰患者(P0.05);肿瘤≥2 cm患者2年无瘤生存率显著低于2 cm患者;淋巴结转移患者2年无瘤生存率显著低于无转移患者(P0.05);血流分级Ⅱ级患者2年无瘤生存率明显低于0级(P0.05),Ⅲ级患者2年无瘤生存率显著低于0级和Ⅰ级(P0.05)。结论乳腺癌患者术前联合应用灰阶超声与彩色多普勒超声检查可确定肿瘤边界、大小及淋巴转移等征象,其与患者无瘤生存率、死亡率等预后指标密切相关,可作为预测乳腺癌患者预后的重要方法。     

金蒲抑瘤片在鼻咽癌的临床应用研究

为探讨鼻咽癌患者放疗期间合并应用金蒲抑瘤片治疗对细胞免疫功能及血中微量元素硒、锌、铜的影响，经病理证实鼻咽癌患者58例，随机分为放疗服药组30例和单纯放疗组28例。两组放疗前后抽静脉血测定T细胞亚群（CD3＋，CD4＋，CD8＋，CD4＋／CD8＋），血中微量元素硒，锌，铜并与30例健康者（正常对照组）进行比较。结果表明，鼻咽癌患者血中微量元素硒，锌，铜及CD3＋，CD4＋，CD4＋／CD8＋显著低于健康人，放疗期间合并应用金蒲抑瘤片治疗后血中微量元素硒，锌，铜及CD3＋，CD4＋，CD4＋／CD8＋较服药前显著升高。提示鼻咽癌患者细胞免疫功能低下，血中微量元素硒，锌，铜显著低于健康人。金蒲抑瘤片能提高鼻咽癌患者因中微量元素硒，锌，铜含量，使低下的细胞免疫功能迅速恢复。     

合成聚芳酯树状分子的新方法

以３，５－二羟基 苯甲酸为起始原料，经甲醇酯化保护羧基，与苯甲酰氯反应，得到３，５－二苯甲酰氧基苯甲酸甲酯用ＡｌＣｌ３．ＮａＩ去掉保护基甲基，以高收率得到３，５－二苯甲酰氧基苯甲酸。其结构均是由ＩＲ，＾１ＨＮＭＲ，ＥＡ等方法证实。     

Synthesis and copolymerization of new phosphorus‐containing acrylates

Two phosphorus‐containing acrylate monomers were synthesized from the reaction of ethyl α‐chloromethyl acrylate and t‐butyl α‐bromomethyl acrylate with triethyl phosphite. The selective hydrolysis of the ethyl ester monomer with trimethylsilyl bromide (TMSBr) gave a phosphonic acid monomer. The attempted bulk polymerizations of the monomers at 57–60 °C with 2,2′‐azobisisobutyronitrile (AIBN) were unsuccessful; however, the monomers were copolymerized with methyl methacrylate (MMA) in bulk at 60 °C with AIBN. The resulting copolymers produced chars on burning, showing potential as flame‐retardant materials. Additionally, α‐(chloromethyl)acryloyl chloride (CMAC) was reacted with diethyl (hydroxymethyl)phosphonate to obtain a new monomer with identical ester and ether moieties. This monomer was hydrolyzed with TMSBr, homopolymerized, and copolymerized with MMA. The thermal stabilities of the copolymers increased with increasing amounts of the phosphonate monomer in the copolymers. A new route to highly reactive phosphorus‐containing acrylate monomers was developed. A new derivative of CMAC with mixed ester and ether groups was synthesized by substitution, first with diethyl (hydroxymethyl)phosphonate and then with sodium acetate. This monomer showed the highest reactivity and gave a crosslinked polymer. The incorporation of an ester group increased the rate of polymerization. The relative reactivities of the synthesized monomers in photopolymerizations were determined and compared with those of the other phosphorous‐containing acrylate monomers. Changing the monomer structure allowed control of the polymerization reactivity so that new phosphorus‐containing polymers with desirable properties could be obtained. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2207–2217, 2003     

Comparison of electrothermal atomization diode laser Zeeman- and wavelength-modulated atomic absorption and coherent forward scattering spectrometry

Atomic absorption and coherent forward scattering spectrometry by using a near-infrared diode laser with and without Zeeman and wavelength modulation were carried out with graphite furnace electrothermal atomization. Analytical curves and limits of detection were compared. The magnetic field was modulated with 50 Hz, and the wavelength of the diode laser with 10 kHz. Coherent forward scattering was measured with crossed and slightly uncrossed polarizers. The results show that the detection limits of atomic absorption spectrometry are roughly the same as those of coherent forward scattering spectrometry with crossed polarizers. According to the theory with bright flicker noise limited laser sources the detection limits and linear ranges obtained with coherent forward scattering spectrometry with slightly uncrossed polarizers are significantly better than those obtained with crossed polarizers and with atomic absorption spectrometry. This is due to the fact that employing approaches of polarization spectroscopy reduce laser intensity fluctuations to their signal carried fractions.     

Evidences of macromolecular chains confinement of ethylene–propylene copolymer in organophilic montmorillonite nanocomposites

A random ethylene–propylene copolymer (EPM) functionalized with grafted diethylsuccinate groups was melt blended with increasing amount (to 20 wt%) of organophilic montmorillonite (OMMT) to prepare nanocomposites with different morphologies as evidenced by XRD and TEM analysis. All the nanocomposites were treated with boiling toluene that did not extract a significant amount of EPM. The increase of not-extracted EPM with the increasing quantity of OMMT suggested strong interactions of the polymer chains with the inorganic substrate. The DSC measurements of nanocomposites and the corresponding insoluble residues revealed a higher T_g values with larger amount of inorganic particles. The dielectric relaxation analysis confirmed the evidence of strong interactions among montmorillonite and the polar diethylsuccinate groups for the macromolecules trapped due to the presence of the inorganic layers. The results were discussed with reference to their relevance as an evidence of nanoconfinement at polymer clay interface and correlated with the clay basal distance variation due to the intercalation process.     

Synthesis of branched copolysilanes from trichlorosilanes

Soluble polymers and copolymers have been prepared from monosubstituted trichlorosilanes via thermal reductive coupling with sodium in toluene. Phenyltrichlorosilane has been copolymerized with methylphenyl dichlorosilane, with n-hexyltrichlorosilane, with tetrachlorosilane and with tetrakis(chlorodimethylsilyl)silane. n-Hexyltrichlorosilane has been copolymerized with methylphenyldichlorosilane, with phenyltrichlorosilane and with silicon tetrachloride. Soluble polymers and copolymers with molecular weight in the range ≈ 2,000 to ≈ 10⁶ have been obtained. The absorption and emission spectra of the resulting polymers are strongly affected by the presence of trisilyl- and tetrasilylsubstituted silicon atoms. © 1995 John Wiley & Sons, Inc.     

CRYSTALLIZATION OF BLENDS OF AN ASYMMETRIC POLY（OXYETHYLENE）-b-POLY（OXYBUTYLENE） BLOCK COPOLYMER WITH POLY（OXYBUTYLENE）

An oxyethylene/oxybutylene block copolymer with asymmetric volume fraction (E115B103) was blended with oxybutylene homopolymer (Bh) at different volume fractions of the block (φE). Crystallization behavior of the blends was studied and was compared with that of the blends from a symmetric block copolymer (E114B56). It was found that the crystallization temperature of E115B103/B28 blend is lower than that of the blends from symmetric block copolymer. For the blend with φE= 0.30 breakout crystallization with an Avrami exponent n ≈ 3.0 is observed. At φE = 0.22 the blend exhibits a variable crystallization behavior: confined crystallization with n ≈ 1.0 at lower crystallization temperatures but breakout crystallization at high crystallization temperatures. For the blend with φE = 0.14 and sphere morphology confined crystallization occurs at all crystallization temperatures studied. When compared with the blends from symmetric block copolymer, confined crystallization occurs more easily in the E115B103/B28 blends. The SAXS results agree with the isothermal crystallization kinetics. Deformation of the confined crystalline block is observed in the blend with φE = 0.14 and mixed lamellar and cylinder morphologies in the blend with φE = 0.22.