Molecularly imprinted polymers for on-line preconcentration by solid phase extraction of pirimicarb in water samples

The synthesis and performance of a molecularly imprinted polymers (MIPs) as a selective solid phase extraction sorbent for the preconcentration of the carbamate pirimicarb from water samples is described. The MIP was prepared using pirimicarb as the template, methacrylic acid as the functional monomer and ethylene glycol dimethacrylate as the cross-linking monomer, and using chloroform as the solvent. The detection of pirimicarb was carried out by differential pulse voltammetry (DPV) at a hanging mercury drop electrode (HMDE) in 0.1 mol l⁻¹ HCl. Solvents of different polarities were checked for the polymer synthesis, and different experimental variables (sample pH, selection of the eluent used, eluent volume, analyte and eluent flow rates and sample volume) associated with the rebinding/extraction process were optimised. For a 25 ml sample, the process took about 13 min and resulted in a nominal enrichment factor of 50 (eluent MeOH:H₂O:HAc, 7:2:1; 0.5 ml) for pirimicarb. A limit of detection of 4.1 μg l⁻¹ was obtained, and a good reproducibility of the measurements using different MIP microcolumns was found. Furthermore, the MIP selectivity was evaluated by checking several substances with similar and different molecular structures to that of pirimicarb. As an application, pirimicarb was determined in water samples of diverse origin which were spiked at a concentration level of 71.5 μg l⁻¹.     

Efficient sample preparation method based on solvent‐assisted dispersive solid‐phase extraction for the trace detection of butachlor in urine and waste water samples

In this work, an efficient sample preparation method termed solvent‐assisted dispersive solid‐phase extraction was applied. The used sample preparation method was based on the dispersion of the sorbent (benzophenone) into the aqueous sample to maximize the interaction surface. In this approach, the dispersion of the sorbent at a very low milligram level was achieved by inserting a solution of the sorbent and disperser solvent into the aqueous sample. The cloudy solution created from the dispersion of the sorbent in the bulk aqueous sample. After pre‐concentration of the butachlor, the cloudy solution was centrifuged and butachlor in the sediment phase dissolved in ethanol and determined by gas chromatography with flame ionization detection. Under the optimized conditions (solution pH = 7.0, sorbent: benzophenone, 2%, disperser solvent: ethanol, 500 μL, centrifuged at 4000 rpm for 3 min), the method detection limit for butachlor was 2, 3 and 3 μg/L for distilled water, waste water, and urine sample, respectively. Furthermore, the preconcentration factor was 198.8, 175.0, and 174.2 in distilled water, waste water, and urine sample, respectively. Solvent‐assisted dispersive solid‐phase extraction was successfully used for the trace monitoring of butachlor in urine and waste water samples.     

Recent developments in solid-phase microextraction for on-site sampling and sample preparation

On-site sampling and sample preparation favor portable, solventless or even solvent-free techniques. Solid-phase microextraction (SPME) has these advantages. This review focuses on developments between 2007 and early 2011 in microextraction techniques for on-site sampling and sample preparation, including fiber SPME, stir-bar sorptive extraction (SBSE), thin-film microextraction (TFME) and different types of in-needle SPME. The major trends in on-site applications of SPME appear to be fiber and thin-film SPME, microextraction by packed sorbent (MEPS) and the sorbent-packed needle-trap device (NTD). We discuss and compare several aspects of these types of SPME in on-site applications. We also describe sorbent phases for SPME that benefit on-site applications. Finally, we provide a perspective on SPME-based techniques for on-site applications.     

Simultaneous extraction and preconcentration of uranium and thorium in aqueous samples by new modified mesoporous silica prior to inductively coupled plasma optical emission spectrometry determination

A new synthesized modified mesoporous silica (MCM-41) using 5-nitro-2-furaldehyde (fural) was applied as an effective sorbent for the solid phase extraction of uranium(VI) and thorium(IV) ions from aqueous solution for the measurement by inductively coupled plasma optical emission spectrometry (ICP OES). The influences of some analytical parameters on the quantitative recoveries of the analyte ions were investigated in batch method. Under optimal conditions, the analyte ions were sorbed by the sorbent at pH 5.5 and then eluted with 1.0 mL of 1.0 mol L⁻¹ HNO₃. The preconcentration factor was 100 for a 100 mL sample volume. The limits of detection (LOD) obtained for uranium(VI) and thorium(IV) were 0.3 μg L⁻¹. The maximum sorption capacity of the modified MCM-41 was found to be 47 and 49 mg g⁻¹ for uranium(VI) and thorium(IV), respectively. The sorbent exhibited good stability, reusability, high adsorption capacity and fast rate of equilibrium for sorption/desorption of uranium and thorium ions. The applicability of the synthesized sorbent was examined using CRM and real water samples.     

碳点在样品前处理及色谱分离中的应用

碳点（CDs）具有生物相容性好、毒性低、稳定性好等优点,目前已广泛应用于生物成像、传感、光催化等领域。近年来,以CDs为吸附剂和分离材料的样品前处理和色谱分离研究也引起了研究者的极大兴趣。该文对CDs在样品前处理和色谱分离中的应用进行了综述,并对其发展前景进行了展望。     

New functionalised silicas for highly selective cation exchange SPE purification in medicinal chemistry

Functionalised silicas 2 and 3 are effective for the cation exchange SPE purification of basic molecules containing acid-sensitive functionalities, the selective separations of mixtures of basic compounds and accelerated reaction work-ups/product isolations.     

基于低共熔溶剂的萃取分离技术及其应用研究进展

随着绿色化学的发展,开发和应用符合绿色化学要求的溶剂和方法备受关注。作为离子液体类似物,低共熔溶剂(deep eutectic solvent, DES)是通过氢键受体(hydrogen bond acceptor, HBA)和氢键供体(hydrogen bond donator, HBD)的氢键作用而形成的一种混合物,具有环境友好、制备简单、成本低、可生物降解等优点,在很多领域均有越来越广泛的应用。DES可以从不同样品中萃取和分离不同的目标化合物,其作为萃取溶剂具有独特的优势,可以获得较高的萃取效率且样品基质对分析过程的影响较小。在分散液液微萃取(dispersive liquid-liquid micro-extraction, DLLME)程序中,DES可以萃取复杂基质中的残留药物、金属离子和生物活性成分;与传统的萃取方法相比,该方法具有对有机试剂需求少,萃取效率更高等明显优势。而且,在DLLME中加入DES作为分散剂,能够加速萃取剂在样品溶液中的扩散,具有小型化、成本低等优点。相比于传统分散剂甲醇、乙腈的高挥发性、易燃性,DES的高稳定性、低毒性使其在绿色化学领域中更具有优势,应用更广。因此,DES与DLLME的结合近年来发展迅速。不仅如此,DES与固相萃取联合应用也具有广泛的应用前景,在与固相萃取小柱和搅拌棒联合应用时,DES可以作为洗脱剂,氢键供体及氢键给体的用量之比是洗脱效率的重要考察因素之一。在与磁性材料联用时,DES能与磁性多壁碳纳米管、磁性氧化石墨烯等纳米复合材料结合,通过氢键、π-π作用力和静电作用力等特异性吸附目标分析物。并且能够参与磁性凝胶和分子印迹聚合物的合成,推动磁性材料向绿色化学的方向发展,进一步拓展DES的应用。作为一类新兴的绿色溶剂,DES在化合物的萃取分离技术方面受到广泛关注,在不同的萃取技术中扮演了不同的角色,并表现出良好的性能,因此逐渐成为绿色化学领域的研究重点。该文整合了DES在萃取分离技术中的研究进展,介绍了DES的制备、性质和分类,对DES在DLLME和固相萃取中的应用进行了总结和归类,并展望了DES在萃取分离技术中的应用前景,为DES未来的应用提供参考。     

Solid-phase extraction and preconcentration of cadmium(II) in aqueous solution with Cd(II)-imprinted resin (poly-Cd(II)-DAAB-VP) packed columns

A novel chelating resin (poly-Cd(II)-DAAB-VP) was prepared by metal ion imprinted polymer (MIIP) technique. The resin was obtained by one pot reaction of Cd(II)-diazoaminobenzene-vinylpyridine with cross-linker ethyleneglycoldimethacrylate (EGDMA). Comparing with non-imprinted resin, the poly-Cd(II)-DAAB-VP has higher adsorption capacity and selectivity for Cd(II). The distribution ratio (D) values for the Cd(II)-imprinted resin show increase for Cd(II) with respect to both D values of Zn(II), Cu(II), Hg(II) and non-imprinted resin. The relatively selective factor (α_r) values of Cd(II)/Cu(II), Cd(II)/Zn(II) and Cd(II)/Hg(II), are 51.2, 45.6, and 85.4, which are greater than 1. poly-Cd(II)-DAAB-VP can be used at least 20 times without considerable loss of adsorption capacity. Based on poly-Cd(II)-DAAB-VP packed columns, a highly selective solid-phase extraction (SPE) and preconcentration method for Cd(II) from aqueous solution was developed. The MIIP-SPE preconcentration procedure showed a linear calibration curve within concentration range from 0.093 to 30 μg l⁻¹. The detection limit and quantification limit were 0.093 and 0.21 μg l⁻¹ (3σ) for flame atomic absorption spectrometry (FAAS). The relative standard deviation of the eleven replicate determinations was 3.7% for the determination of 10 μg of Cd(II) in 100 ml water sample. Determination of Cd(II) in certified river sediment sample (GBW 08301) demonstrated that the interfering matrix had been almost removed during preconcentration. The column was good enough for Cd(II) determination in matrixes containing components with similar chemical property such as Cu(II), Zn(II) and Hg(II).     

固相萃取净化-超高效液相色谱-串联质谱法测定蜂蜜中雷公藤次碱

建立了一种固相萃取净化-超高效液相色谱-串联质谱检测蜂蜜中雷公藤次碱的分析方法.样品用水溶解后经固相萃取净化,采用Hypersil GOLD C18柱(50 mm×2.1 mm, 1.9 μm)分离,以水和甲醇(含0.15%甲酸)为流动相,在流速0.25 mL/min下梯度洗脱,电喷雾离子源正离子多反应监测(MRM)模式串联质谱进行测定.考察了试样溶解溶剂、色谱和质谱测定条件等.结果表明:雷公藤次碱在0.01~2 μg/L范围内具有较好的线性关系,相关系数大于0.998.该方法定量限(S/N>10)为0.01 μg/kg,在0.01、0.05和0.5 μg/kg添加水平的回收率为76.1%~96.2%,相对标准偏差(RSD, n=6)小于10%.该方法快速、灵敏、准确,适用于蜂蜜中雷公藤相关物质残留的定性、定量分析.     

Selective extraction, separation and speciation of iron in different samples using 4-acetyl-5-methyl-1-phenyl-1H-pyrazole-3-carboxylic acid

A method for speciation, preconcentration and separation of Fe(II) and Fe(III) in different matrices was developed using solvent extraction and flame atomic absorption spectrometry. 4-Acetyl-5-methyl-1-phenyl-1H-pyrazole-3-carboxylic acid (AMPC) was used as a new complexing reagent for Fe(III). The Fe(III)-AMPC complex was extracted into methyl isobutyl ketone (MIBK) phase in the pH range 1.0-2.5, and Fe(II) ion remained in aqueous phase at all pH. The chemical composition of the Fe(III)-AMPC complex was determined by the Job's method. The optimum conditions for quantitative recovery of Fe(III) were determined as pH 1.5, shaking time of 2 min, 1.64 × 10⁻⁴ mol L⁻¹ AMPC reagent and 10 mL of MIBK. Furthermore, the influences of diverse metal ions were investigated. The level of Fe(II) was calculated by difference of total iron and Fe(III) concentrations. The detection limit based on the 3σ criterion was found to be 0.24 μg L⁻¹ for Fe(III). The recoveries were higher than 95% and relative standard deviation was less than 2.1% (N = 8). The validation of the procedure was performed by the analysis of two certified standard reference materials. The presented method was applied to the determination of Fe(II) and Fe(III) in tap water, lake water, river water, sea water, fruit juice, cola, and molasses samples with satisfactory results.     

超声波提取-固相萃取-液相色谱-串联质谱法同时测定沉积物中24种皮质类固醇激素

沉积物中皮质类固醇激素(CSs)的痕量分析对探究其在环境多介质中的赋存状况和环境行为具有重要意义.然而目前相关研究主要集中在水样中糖皮质激素的测定,对基质更为复杂的环境固体样品中CSs的定量分析研究仍十分有限亦缺乏针对性、系统性,且目标物未能覆盖大多数常见常用的糖/盐CSs.本研究系统地优化了样品前处理过程和仪器分析中...     

Stir rod sorptive extraction with monolithic polymer as coating and its application to the analysis of fluoroquinolones in honey sample

A stir rod sorptive extraction (SRSE) with monolithic polymer as coating was proposed to avoid the friction loss of coating during the stirring process. In our study, poly(2-acrylamide-2-methylpropanesulfonic acid-co-octadecyl methacrylate-co-ethylene glycol dimethacrylate) [poly(AMPS-co-OCMA-co-EDMA)] monolithic polymer was used as a coating of SRSE. The effect of concentration of porogen on SRSE performance was studied. Four fluoroquinolones (FQs) were selected as testing analytes to evaluate the extraction efficiency of SRSE. To achieve the optimum extraction conditions of SRSE towards FQs, several parameters, including extraction time, extraction temperature, stirring rate, sample solution pH and contents of inorganic salt in the sample solution were investigated. Under the optimized conditions of SRSE, a method for the determination of FQs in honey sample was proposed based on the combination of SRSE with liquid chromatography and electrospray ionization mass spectrometry (SRSE/LC/ESI-MS). The detection limits (LODs) of the proposed method for four FQs ranged from 0.06 to 0.14 ng/g and the recoveries were in the range of 70.3–122.6% at different concentrations for honey samples. Good method reproducibility was found as intra- and inter-day precisions, yielding the relative standard deviations less than 11.9% and 12.4%, respectively. The results show that SRSE with poly(AMPS-co-OCMA-co-EDMA) monolithic polymer as coating possessed good extraction capacity towards FQs in honey samples. Finally, the monolithic polymer coated stir rod was demonstrated to be reused at least 60 times.     

Fast,selective, and sensitive analysis of low-abundance peptides in human plasma by electromembrane extraction

A totally new concept based on electrokinetic migration was evaluated for the extraction of three biologically active peptides from human plasma. Angiotensin 2, leu-enkephalin, and endomorphin 1 migrated from a diluted human plasma sample (2 mL, positive electrode), through a supported liquid membrane (SLM) of 1-octanol, di-isobutylketon, and di-(2-ethylhexyl) phosphate (DEHP) (55:35:10, w/w/w), and into an acidified acceptor solution (25 μL 50 mM HCl, negative electrode) by the application of an electrical potential (20 V) across the SLM. After only five min of extraction, the acceptor solution was injected and analyzed directly by liquid chromatography. The three peptides were quantified by tandem mass spectrometry, with acceptable linearity ranging from 100.0 to 1000.0 pg mL⁻¹ (r² in the range 0.9736–0.9988), and repeatability (RSD) ranging between 15% and 24% (n = 5), using plasma spiked with the three peptides in 100 pg mL⁻¹ concentration. The estimated detection limits (S/N ratio of 3:1) for angiotensin 2, leu-enkephalin, and endomorphin 1, were 60, 24, and 24 pg mL⁻¹, respectively. With this novel approach based on electromembrane extraction (EME) coupled to LC–MS/MS, endogenous concentrations of the peptides were detected in non-spiked human plasma samples, with a total analysis time less than 50 min. These experimental findings were highly interesting, and showed the opportunities for EME with regard to future peptide extractions.     

Comparison of different extraction methods for the determination of statin drugs in wastewater and river water by HPLC/Q-TOF-MS

Three preconcentration techniques including solid phase extraction (SPE), dispersive liquid-liquid microextraction (DLLME) and stir-bar sorptive extraction (SBSE) have been optimized and compared for the analysis of six hypolipidaemic statin drugs (atorvastatin, fluvastatin, lovastatin, pravastatin, rosuvastatin and simvastatin) in wastewater and river water samples by high performance liquid chromatography coupled to quadrupole-time-of-flight mass spectrometry (HPLC/Q-TOF-MS). Parameters that affect the efficiency of the different extraction methods such as solid phase material, sample pH and elution solvent in the case of SPE; the type and volume of the extracting and dispersive solvent, pH of sample, salt addition and number of extraction steps in the case of DLLME; and the stirring time, pH of sample, sample volume and salt addition for SBSE were evaluated. SPE allowed the best recoveries for most of the analytes. Pravastatin was poorly extracted by DLLME and could not be determined. SBSE was only applicable for lovastatin and simvastatin. However, despite the limitations of having poorer recovery than SPE, DLLME and SBSE offered some advantages because they are simple, require low organic solvent volumes and present low matrix effects. DLLME required less time of analysis, and for SBSE the stir-bar was re-usable. SPE, DLLME and SBSE provided method detection limits in the range of 0.04-11.2 ng L⁻¹, 0.10-17.0 ng L⁻¹ for 0.52-2.00 ng L⁻¹, respectively, in real samples. To investigate and compare their applicability, SPE, DLLME and SBSE procedures were applied to the detection of statin drugs in effluent wastewater and river samples.     

固相萃取-高效液相色谱法同时测定鸡粪中四环素类、喹诺酮类和磺胺类抗生素

建立了一种高效、低成本的固相萃取-高效液相色谱（SPE-HPLC）同时测定鸡粪中6种常见抗生素（2种四环素类、2种喹诺酮类和2种磺胺类）的分析方法。样品经EDTA-McIlvaine缓冲液和有机混合提取液（甲醇-乙腈-丙酮，2：2：1，v/v/v）提取，过HLB固相萃取柱净化，甲醇-二氯甲烷（7：3，v/v）洗脱，高效液相色谱-二极管阵列检测器测定，检测波长λ=270 nm，柱温32℃，流动相为乙腈-0.7%（v/v）磷酸水溶液。该方法在0.5~100 mg/L质量浓度范围内的标准曲线相关系数r²在0.9999~1之间，样品加标回收率在70.0%~116.3%之间，相对标准偏差为1.2%~16.6%。方法检出限为1.3~6.7 μg/kg，定量限为3.5~9.2 μg/kg。应用该方法对辽宁省抚顺市某养鸡场当天的鸡粪进行检测，诺氟沙星和恩诺沙星（喹诺酮类）含量为未检出~9.23 mg/kg和1.57~7.69 mg/kg，磺胺二甲嘧啶（磺胺类）含量为2.02~13.05 mg/kg，磺胺甲恶唑、土霉素和四环素未测出。     

整体柱在线固相微萃取-高效液相色谱同步富集检测水中的苯氧羧酸类除草剂

采用C18毛细管整体柱作为固相微萃取整体柱,构建在线固相微萃取-高效液相色谱联用系统,同步富集检测环境水样中的5种苯氧羧酸类除草剂。详细考察了联用系统运行条件对富集检测的影响。联用系统运行最佳参数为:固相微萃取整体柱长度20 cm,进样流速0.04 mL/min,进样13 min,洗脱流速0.02 mL/min,洗脱5 min。在最佳条件下,5种苯氧羧酸类除草剂的检出限为:9 μg/L (苯氧丙酸)、4 μg/L (2-(2-氯)-苯氧丙酸)、4 μg/L (2-(3-氯)-苯氧丙酸)、5 μg/L (2,4-二氯苯氧乙酸)、5 μg/L (2-(2,4-二氯苯氧基)丙酸)。与HPLC系统直接进样对比,联用系统对5种检测对象表现出优良的富集能力。5种苯氧羧酸类除草剂的回收率在79.0%~98.0%之间(RSD≤3.9%)。该方法成功应用于水样中5种苯氧羧酸类除草剂的检测,结果令人满意。     

Loading controlled magnetic carbon dots for microwave‐assisted solid‐phase extraction: Preparation,extraction evaluation and applications in environmental aqueous samples

An adsorbent of carbon dot@poly(glycidyl methacrylate)@Fe₃O₄ nanoparticles has been developed for the microwave‐assisted magnetic solid‐phase extraction of polycyclic aromatic hydrocarbons in environmental aqueous samples prior to high‐performance liquid chromatography with UV/visible spectroscopy detection. Poly(glycidyl methacrylate) was synthesized by atom transfer radical polymerization. The chain length and amount of carbon dots attached on them can be easily controlled through changing polymerization conditions, which contributes to tunable extraction performance. The successful fabrication of the nano‐adsorbent was confirmed by transmission electronic microscopy, Fourier transform infrared spectroscopy, Raman spectroscopy and vibrating sample magnetometry. The extraction performance of the adsorbent was evaluated by using polycyclic aromatic hydrocarbons as model analytes. The key factors influencing the extraction, such as microwave power, adsorption time, desorption time and desorption solvents were investigated in detail. Under the optimal conditions, the microwave‐assisted method afforded magnetic solid‐phase extraction with short extraction time, wide dynamic linear range (0.02–200 μg/L), good linearity (R² ≥ 98.57%) and low detection limits (20–90 ng/L) for model analytes. The adsorbent was successfully applied for analyzing polycyclic aromatic hydrocarbons in environmental aqueous samples and the recoveries were in the range of 86.0–124.2%. Thus, the proposed method is a promising candidate for fast and reliable preconcentration of trace polycyclic aromatic hydrocarbons in real water samples.     

固相萃取净化及超高效液相色谱-串联质谱法测定橡胶制品中的13种N-亚硝胺

建立了固相萃取(SPE)净化、超高效液相色谱-串联质谱(UHPLC-MS/MS)测定橡胶制品中13种N-亚硝胺的方法。样品于密闭萃取瓶中于60 ℃下用甲醇超声萃取30 min,C₁₈固相萃取小柱对萃取液进行净化,经C₁₈色谱柱分离,最后用电喷雾正离子(ESI⁺)和多重反应监测模式(MRM)对13种N-亚硝胺进行定性、定量测定。实验中对样品前处理、色谱分离条件和质谱检测条件进行了优化。在优化的实验条件下,橡胶样品中添加N-亚硝基二甲胺(NDMA)与N-亚硝基-二乙基胺(NDEA)为500 μg/kg、其他组分均为50 μg/kg时,各组分的相对标准偏差(RSD,n=7)小于10%;在实际样品中的加标回收率为70.7%~117.0%;方法的检出限(LOD,以10倍标准偏差计)为0.5~500 μg/kg。方法可应用于橡胶制品中13种N-亚硝胺的测定。     

An overview of sample preparation and extraction of synthetic pyrethroids from water,sediment and soil

The latest developments in sample preparation and extraction of synthetic pyrethroids from environmental matrices viz., water, sediment and soil were reviewed. Though the synthetic pyrethroids were launched in 1970s, to the best of authors’ knowledge there was no review on this subject until date. The present status and recent advances made during the last 10 years in sample preparation including conservation and extraction techniques used in determination of synthetic pyrethroids in water, sediment and soil were discussed. Pre- and post-extraction treatments, sample stability during extraction and its influence upon the whole process of analytical determination were covered. Relative merits and demerits including the green aspects of extraction were evaluated. The current trends and future prospects were also addressed.     

分散固相萃取-液相色谱-串联质谱法测定谷物、蔬菜、水果中27种新型杀菌剂

建立了同时检测谷物、蔬菜和水果中27种新型杀菌剂的分散固相萃取-液相色谱-串联质谱(DSPE-LC-MS/MS)分析方法。样品经1%(体积分数)乙酸丙酮溶液提取,以无水硫酸镁(MgSO_4)脱水,经N-丙基乙二胺(PSA)、C_(18)、无水MgSO_4、多壁碳纳米管(MWCNT)混合净化剂净化,经C_(18)色谱柱分离,用乙腈和体积分数为0.1%的甲酸水溶液(含5 mmol/L乙酸铵)梯度洗脱,多反应监测(MRM)正离子模式扫描,采用外标法定量。噻呋酰胺和氯啶菌酯在20.47~200μg/kg范围内线性关系良好,其他25种新型杀菌剂在0.02~100μg/kg范围内线性关系良好,相关系数R~2≥0.995 0,加标回收率为70.02%~117.6%,相对标准偏差(RSD)为0.01%~19.62%(n=3)。噻呋酰胺和氯啶菌酯的检出限为6.15~16.67μg/kg,定量限为20.47~55.5μg/kg。其他25种新型杀菌剂的检出限为0.006~4.44μg/kg,定量限为0.02~14.79μg/kg。该方法简便、快速、可靠,可用于谷物、蔬菜、水果中27种新型杀菌剂的快速测定。