Separation of acidic and basic proteins by capillary electrophoresis using gemini surfactants and gemini-capped nanoparticles as buffer additives

This paper demonstrated simultaneous separation of acidic and basic proteins using cationic gemini surfactants as buffer additives in capillary electrophoresis. We showed that even at a low concentration (0.1 mmol·L-1) of alkanediyl-α,ω-bis(dimethyloctadecylammonium bromide) (18-s-18), the wall adsorption of both acidic and basic proteins could be effectively suppressed under acidic conditions. Smaller micelle size (e.g., s=5-8) is more effective for the separation of acidic proteins than larger micelle siz...     

双子表面活性剂及其保护的纳米金作为缓冲添加剂用于毛细管电泳蛋白质分离

报道了使用阳离子双子表面活性剂作为毛细管电泳的缓冲添加剂用于同时分离酸性和碱性蛋白质.在酸性的缓冲条件下,只需要使用低浓度的阳离子双子表面活性剂（0.1mmol/L18-s-18）作为缓冲液的添加剂,就可以有效地抑制酸性和碱性蛋白质在毛细管壁的吸附,从而得到高效的蛋白质分离.实验表明,较小的胶束尺寸（如s=5～8）比大的胶束尺寸（如s〈4或〉10）能更有效地抑制酸性蛋白质的吸附.改变双子表面活性剂的中间基的长度能够对蛋白质的电泳淌度进行一定的调节,从而对分离的选择性进行一定的优化.在最优的实验条件下,蛋白质迁移时间的日内和日间标准偏差（RSD）分别小于0.8%和2.2%,回收率为79%到100.4%.另外,还考察了双子表面活性剂保护的金纳米颗粒用作毛细管电泳缓冲添加剂在蛋白质分离中的应用.实验表明,在缓冲液中加入纳米金能够缩短分析时间,并能小幅度地提高分离效率.最后,使用该方法分析了一系列复杂生物样品,包括血浆、红细胞和鸡蛋清样品,均得到了满意的结果.     

电泳技术在纳米颗粒分离中的应用

合成纳米颗粒常在尺寸和形状方面具有广泛分布.在很多实验中,需要利用一定大小及形状的纳米颗粒的独特物理化学性质,因此,简便快速的纳米颗粒分离技术越来越受到诸多科学领域的重视.电泳技术以其高分辨率,被广泛用于多种生物大分子如核酸、蛋白质等的分离纯化.纳米颗粒在尺寸上与生物体中的蛋白复合物、细胞器和微生物等十分接近,考虑到带电纳米颗粒与生物分子在电场中的运动行为的相似性,运用电泳技术进行纳米颗粒的鉴定、分离和纯化是一种新的思路,并取得了良好的实验结果.本文主要介绍了琼脂糖凝胶电泳、毛细管电泳以及其他一些电泳技术在纳米颗粒分离中的研究进展.     

Nonaqueous and aqueous capillary electrophoresis of synthetic polymers

In this work, the use of capillary electrophoresis (CE) to analyze synthetic polymers is reviewed including works published till February 2004. The revised works have been classified depending on the CE mode (e.g., free solution capillary electrophoresis, capillary gel electrophoresis, etc.) and type of buffer (i.e., nonaqueous, aqueous and hydro-organic background electrolytes) employed to separate synthetic macromolecules. Advantages and drawbacks of these different separation procedures for polymer analysis are discussed. Also, physicochemical studies of complex polymer systems by CE are reviewed, including drug release studies, synthetic polyampholytes, dendrimers, fullerenes, carbon nanotubes and associative copolymers.     

Chemiluminescence detection coupled to capillary electrophoresis

In recent years, chemiluminescence (CL)-based detection coupled to capillary electrophoresis (CE) as separation technique has attracted much interest due to new advances in home-made configurations, sample-treatment techniques for application to real matrixes, development of a commercial instrument and use of miniaturization techniques to obtain micro total analysis systems incorporating CE separation and CL detection in microchips. We present some developments, key strategies and selected analytical applications of CE-CL since the year 2000 in diverse fields (e.g., clinical and pharmaceutical, environmental or food analysis).     

Analytical characterization of alcohol-ethoxylate substances by instrumental separation techniques

The characterization of alcohol-ethoxylate substances is a significant challenge in analytical science. Their importance in industry and society makes it necessary to have methods for their rapid, reliable characterization and quantification. This overview highlights the instrumental separation techniques for their analysis - chromatographic (e.g., gas, liquid and supercritical fluid chromatography) and electrophoretic (e.g., capillary, gel, capillary zone, and non-aqueous capillary electrophoresis and micellar electrokinetic chromatography). We summarize and explain analytical parameters for their characterization. We include selected references and examples to show the appropriateness of instrumental separation techniques for the analytical characterization of alcohol-ethoxylate substances.     

Effect of the flow profile on separation efficiency in pressure‐assisted reversed‐polarity capillary zone electrophoresis of anions: Simulation and experimental evaluation

Capillary electrophoresis connected to electrospray ionization mass spectrometry is a promising combination to analyze complex biological samples. The use of sheathless electrospray ionization interfaces, such as a porous nanoelectrospray capillary emitter, requires the application of forward flow (either by pressure or electroosmosis) to maintain the electrospray process. The analysis of solute molecules with strong negative charges (e.g., aminopyrenetrisulfonate labeled glycans) necessitates a reversed‐polarity capillary electrophoresis separation mode, in which case the electroosmotic flow is counter current, thus pressure assistance is necessary. In this study, we compared the effect of forced convection with and without counter electroosmotic flow on the resulting separation efficiency in capillary electrophoresis based on flow profile simulations by computational fluid dynamics technique and by actual experiments. The efficiencies of the detected peaks were calculated from the resulting electropherograms and found approximately 950 000 plates/m for electrophoresis with counter electroosmotic flow, 20 000 plates/m with pressure only (such as would be in open tubular liquid chromatography), and 480 000 plates/m for electrophoresis with simultaneous counter electroosmotic flow and forward pressure assistance, which validates the simulation data.     

Optimization of fast CE analyses of ecstasy derivatives by use of experimental designs

Summary The separation by capillary electrophoresis of five ecstasy derivatives has been evaluated by means of experimental designs. A full-factorial design and a central composite design were employed to optimize the experimental conditions for a fast separation. With a conventional capillary (62.5 cm length) analytes were separated in less than 8 min. When the capillary length was reduced the analysis time decreased substantially. Comparisons were made between different procedures (e.g. working at a constant field or at constant voltage) and finally, a fast separation of five Ecstasy derivatives was achieved in 1 min.     

Capillary electrophoresis of synthetic peptide standards varying in charge and hydrophobicity

A mixture of eight structurally closely related synthetic peptides as capillary electrophoretic (CE) standards is introduced. The almost identical mass-to-charge ratio of the standards, coupled with their random-coil (i.e., no secondary structure) nature, offer a potent analytical test for CE to separate peptides varying only subtly in hydrophobicity. Parameters varied to effect a separation included background electrolyte concentration, temperature, applied voltage in capillary zone electrophoresis (CZE in uncoated capillaries), as well as the introduction of hydrophobic mechanisms to the separation either through the use of micelles or C8-coated capillaries. Our step-by-step approach culminated in an optimized combination of a CZE mechanism for separation of differently charged peptide groups (based on common mass-to-charge ratio) and an ion-pairing mechanism (effecting a separation within each group of identically charged peptides), which we have termed ion-interaction CZE or II-CZE. The study clearly shows how the peptide standards allow an excellent assessment of the resolving power of CE.     

Influence of electric field intensity, ionic strength, and migration distance on the mobility and diffusion in DNA surface electrophoresis

In order to increase the separation rate of surface electrophoresis while preserving the resolution for large DNA chains, e.g., genomic DNA, the mobility and diffusion of Lambda DNA chains adsorbed on flat silicon substrate under an applied electric field, as a function of migration distance, ionic strength, and field intensity, were studied using laser fluorescence microscope. The mobility was found to follow a power law with the field intensity beyond a certain threshold. The detected DNA peak width was shown to be constant with migration distance, slightly smaller with stronger field intensity, but significantly decreased with higher ionic strength. The molecular dynamics simulation demonstrated that the peak width was strongly related with the conformation of DNA chains adsorbed onto surface. The results also implied that there was no diffusion of DNA during migration on surface. Therefore, the Nernst-Einstein relation is not valid in the surface electrophoresis and the separation rate could be improved without losing resolution by decreasing separation distance, increasing buffer concentration, and field intensity. The results indicate the fast separation of genomic DNA chains by surface electrophoresis is possible.     

Monosaccharide profiling of glycoproteins by capillary electrophoresis with contactless conductivity detection

Saccharides form one of the major constituents of biological macromolecules in living organisms. Many biological processes including protein folding, stability, immune response and receptor activation are regulated by glycosylation. In this work, we optimized a capillary electrophoresis method with capacitively coupled contactless conductivity detection for the separation of eight monosaccharides commonly found in glycoproteins, namely D-glucose, D-galactose, D-mannose, N-acetyl-D-glucosamine, N-acetyl-D-galactosamine, D-fucose, N-acetylneuraminic acid, and D-xylose. A highly alkaline solution of 50 mM sodium hydroxide, 22.5 mM disodium phosphate, and 0.2 mM CTAB (pH 12.4) was used as a background electrolyte in a 10 µm id capillary. To achieve baseline separation of all analytes, a counter-directional pressure of –270 kPa was applied during the separation. The limits of detection of our method were below 7 µg/ml (i.e., 1.5 pg or 1 mg/g protein) and the limits of quantification were below 22 µg/ml (i.e., 5 pg or 3 mg/g protein). As a proof of concept of our methodology, we performed an analysis of monosaccharides released from fetuin glycoprotein by acid hydrolysis. The results show that, when combined with an appropriate pre-concentration technique, the developed method can be used as a monosaccharide profiling tool in glycoproteomics and complement the routinely used LC-MS/MS analysis.     

Analysis of phenolic acids and flavonoids in honey

Honey is rich in phenolic acids and flavonoids, which exhibit a wide range of biological effects and act as natural antioxidants. The analysis of polyphenols has been regarded as a very promising way of studying floral and geographical origins of honeys. This review surveys recent literature on determination of these active compounds in honey. The analytical procedure to determine individual phenolic compounds involves their extraction from the sample matrix, analytical separation and quantification. We pay particular attention to sample pre-treatment and separation techniques (e.g., high-performance liquid chromatography and electrophoresis).     

A cationic β‐cyclodextrin as a dynamic coating for the separation of proteins in capillary electrophoresis

A cationic cyclodextrin was used as dynamic coating for the capillary electrophoresis of a model mixture of proteins (i.e., ubiquitin, α‐lactoglobulin, cytochrome‐c, and myoglobin) as positively charged species in a fused silica capillary. An interesting feature of the coating is that by simple adjustment of the concentration of cyclodextrin added into the background electrolyte, a neutral or positively charged surface, which was beneficial in preventing protein adsorption at the inner capillary wall surface, was obtained. This is the first demonstration of a dynamic coating that yielded a neutral surface for protein separations in capillary electrophoresis. Based on electro‐osmotic flow measurements, addition of 0.05 to 0.10 mg/mL quaternary β‐cyclodextrin in a low pH electrolyte resulted in a neutral or positive surface (undetectable to very slow anodic electro‐osmotic flow). The coating approach afforded the electrophoretic separation of the mixture of proteins at positive polarity with good repeatability and separation performance.     

A capillary electrophoresis method for the determination of soluble monosaccharides in Ginkgo biloba leaves

A method for the simultaneous determination of six monosaccharides by pre-column derivatization with 1-phenyl-3-methyl-5-pyrazolone and capillary electrophoresis was developed in this work. The derivatization (i.e., reaction temperature, capillary electrophoresis duration, and extraction number) and separation (i.e., pH and buffer concentration) conditions for capillary electrophoresis were optimized. Results showed that the limits of detection under optimal conditions were in the range of 0.036–0.35 mg/L with a mean correlation coefficient >0.99. The recoveries were in the range of 87.3–108.49%, and the relative standard deviations of intra- and inter-day variations were in the ranges of 2.2–3.8 and 3.2–5.0%, respectively. The method was successfully applied to the analysis of six free monosaccharides in three types of Ginkgo biloba leaves.     

Stronger together: Analytical techniques for recombinant adeno associated virus

With recent FDA approval of two recombinant adeno-associated virus (rAAV)-based gene therapies, these vectors have proven that they are suitable to address monogenic diseases. However, rAAVs are relatively new modalities, and their production and therapy costs significantly exceed those of conventional biologics. Thus, significant efforts are made to improve the processes, methods, and techniques used in manufacturing and quality control (QC). Here, we evaluate transmission electron microscopy (TEM), analytical ultracentrifugation (AUC), and two modes of capillary electrophoresis (CE) for their ability to analyze the DNA encapsidated by rAAVs. While TEM and AUC are well-established methods for rAAV, capillary gel electrophoresis (CGE) has been just recently proposed for viral genome sizing. The data presented reflect that samples are very complex, with various DNA species incorporated in the virus, including small fragments as well as DNA that is larger than the targeted transgene. CGE provides a good insight in the filling of rAAVs, but the workflow is tedious and the method is not applicable for the determination of DNA titer, since a procedure for the absolute quantification (e.g., calibration) is not yet established. For estimating the genome titer, we propose a simplified capillary zone electrophoresis approach with minimal sample preparation and short separation times (<5 min/run). Our data show the benefits of using the four techniques combined, since each of them alone is prone to delivering ambiguous results. For this reason, a clear view of the rAAV interior can only be provided by using several analytical methods simultaneously.     

Sodium dodecyl sulfate free gel electrophoresis/electroelution sorting for peptide fractionation

Shotgun proteomics based on peptide fractionation by using liquid chromatography has become the common procedure for proteomic studies, although in the very beginning of the field, protein separation by using electrophoresis was the main tool. Nonetheless, during the last two decades, the electrophoretic techniques for peptide mixtures fractionation have evolved as a result of relevant technological improvements. We also proposed the combination of sodium dodecyl sulfate polyacrylamide gel electrophoresis for protein fractionation and sodium dodecyl sulfate free polyacrylamide gel electrophoresis for peptide separation as a novel procedure for proteomic studies. Here, we present an optimized device for sodium dodecyl sulfate free polyacrylamide gel electrophoresis improving peptide recoveries respect to the established electrophoretic technique off gel electrophoresis meanwhile conserving the excellent resolution described for the former technique in slab gel based systems. The device simultaneously allows the separation and the collection of fractionated peptides in solution.     

Revisiting electroblotting of immobilized pH gradient gels: a new protocol for studying post-translational modification of proteins

Currently, one of the most important techniques in proteome analysis is two-dimensional electrophoresis that is widely used for separation of thousands of different protein spots. Nevertheless, characterization of special aspects in protein patterns, e.g., separation of protein isoforms generated by post-translational modifications, requires individual detection methods, e.g., immunoblotting. Blotting of proteins after fractionation in immobilized pH gradients has always caused some problems. In this paper we present an optimized protocol for immunoblotting after isoelectric focusing using immobilized pH gradient (IPG) strips cast on Net-Fix as an internal support that is permeable to electric current. The focusing procedure can be carried out in commonly used IPG systems, e.g., the IPGphor by Amersham Biosciences, where electrically assisted rehydration can be performed. This may be of interest for many laboratories, because the same system as used for the first dimension of two-dimensional polyacrylamide gel electrophoresis (2-D PAGE) is involved. As an example, we describe separation and detection of up to seven isoforms of recombinant erythropoietin beta using semidry blotting of IPG strips and visualization by chemiluminescence detection.     

Preliminary Study on Reverse Pulse Amperometric Detection in Capillary Electrophoresis for Simultaneous Determination of Cysteine and Cystine

Simultaneous determination of cysteine (RSH) and cystine (RSSR), two important sulfur-containing amino acids, in capillary electrophoresis (CE) has been an analytical task. Dual-microelectrode amperometric detection seems to be a good scheme, but significant difficulty in electrode construction and poor detection limit for RSSR determination remain major short-comings. In reverse pulse amperometric (RPA) detection, the applied potentials are repeatedly pulsed back and forth between the reducing initial potential (e.g., E_i = ?1.4 V) and the oxidizing final potential (e.g., E_f = 0.0 V) at a single, gold-mercury amalgam (Au/Hg) microelectrode. At E_i, RSSR is reduced to RSH which causes catalytical oxidation of the Au/Hg amalgam microelectrode when the potential is pulsed to E_f. The resulting anodic current is then recorded. Therefore, by using RPA detection after CE separation, RSH and RSSR can be simultaneously determined.     

毛细管电泳新型手性分离体系研究进展

在现代分离科学中,手性化合物的分离分析一直是研究的重点和难点。相比于高效液相色谱（HPLC）、气相色谱（GC）等传统色谱分析方法,毛细管电泳（CE）技术凭借其高效率、低消耗、分离模式多样化等诸多优势,已经发展成为手性分离研究领域最有应用前景的分析方法之一。近年来,研究人员在CE手性分析方法的构建过程中,基于毛细管电动色谱（EKC）、配体交换毛细管电泳（LECE）、毛细管电色谱（CEC）等各种基础电泳模式,不断地对传统手性分离体系进行优化和改造,构建出了许多高性能的新型手性CE分离体系。如利用各类功能化离子液体以"手性离子液体协同拆分""手性离子液体配体交换""离子液体手性选择剂"等模式设计出多种基于离子液体的CE手性分离体系;利用纳米材料独特的尺寸效应、多样性、可设计性等特点,直接或与传统手性选择剂有机结合构建CE手性分离体系。此外,金属有机骨架材料修饰、低共熔溶剂修饰、非连续分段式部分填充等各式新颖的CE手性分离体系也都被研究人员成功开发,并表现出较大的发展潜力。该综述将对近年来（尤其是2015~2019年）此类新型CE手性分离体系的发展状况进行梳理,并结合相应的手性识别机理研究和手性CE方法实际应用情况,对该领域存在的问题及发展前景进行分析和展望。     

无胶筛分毛细管电泳分析几百个碱基对核酸的条件优化

通过正交设计实验综合分析了内充羟丙基甲基纤维素（ＨＰＭＣ）无胶筛分毛细管电泳中的分离场强、ＨＰＭＣ浓度、柱长度和柱内径对核酸分离的影响。结果表明,柱长度越长、柱内径越小、分离场强越小,分离效果越好。考虑实际情况,为能在短时间内使几百个碱基对的核酸得到有效分离,一般选择３７ｃｍ×７５μｍｉ．ｄ．的涂壁毛细管、柱内质量浓度为８ｇ／Ｌ的ＨＰＭＣ、场强为３２４Ｖ／ｃｍ的条件,并在此种条件下分析了ＡｐｏＢ１００基因的低浓度聚合酶链式反应（ＰＣＲ）扩增产物（７１０ｂｐ）。