Trends in nanomaterial-based solid-phase microextraction with a focus on environmental applications - A review

Effective solid-phase microextraction (SPME) in environmental field represents a crucial step for the adequate extraction of several analytes. Several materials have been traditionally developed for SPME of several analytes from environmental samples, even though their several restrictions such as post-treatment required, elevate costs and limited efficiency. Recently, nanomaterials (NMs) have emerged as a promising substitute for SPME in environmental applications of traditional techniques, due to their small size and their high specific surface-area which enhances their high reactivity. In this present review different NMs which have recently been utilized as SPME sorbent for environmental applications are classified into eleven main groups, namely nanoparticles, nanofibers, nanoflakes, nanocomposites, nanorods, nanotubes, nanohorns, nanosheets, nanocubes, nanospheres and polymer-based NMs. Application of these NMs in SPME modes and configurations for environmental analysis has been reviewed. The study discusses not only the advantages but also the major limitations of using such NMs.     

Potential use of capillary zone electrophoresis in size characterization of quantum dots for environmental studies

Quantum dot (QD) nanoparticles (NPs) are of great interest to various researchers due to their wide range of applications, from photovoltaic sensitizers to in vivo fluorescent probes. There is a need to characterize environmental fate, degradation, and ecotoxicity of QDs because these NPs may be introduced into the environment upon disposal of waste products containing QDs following the anticipated increase in their production and use. Because the properties of QDs are defined primarily by their composition and size, it is imperative that QD size be measured accurately and quickly. Current methods for measuring the size of QDs tend to be relatively slow, require large amounts of sample and may not be suitable for environmental or biological samples. Capillary zone electrophoresis (CZE), with its inherently high separation efficiency based on the size-to-charge ratio of analytes, holds promise for efficient size determination of NPs in aqueous samples.This review examines the potential use of CZE in characterizing and separating QDs compared to the conventional methods employed in determining size distribution of NPs. We briefly discuss the advantages and the limitations of commonly used techniques for size characterization.In addition to published literature, we present results from our laboratory using CZE with laser-induced fluorescence (LIF) to examine the effect of natural organic matter and buffer composition on the electrophoretic mobility of QDs. The use of CZE in environmental studies can provide insights into the degradation and the potential impacts of QDs upon exposure to environmental and biological matrices.     

Biogenic synthesis of gold and silver nanoparticles used in environmental applications: A review

Due to their physical, chemical, optical, and mechanical properties, metallic nanoparticles (MNPs) are increasingly being used, with an emphasis on silver nanoparticles (AgNPs) and gold nanoparticles (AuNPs). In recent years, green synthesis has gained prominence for exploring the use of naturally available biological sources for the obtention of metallic nanoparticles. Among these, algae and plants stand out due to the presence of polysaccharides, proteins, polyphenols, and vitamins (among others) in their composition, which can act in the reduction and stabilisation of MNPs, and these biogenic materials have been characterised mainly by spectrometric and microscopic techniques. In addition, due to the numerous advantages of nanoparticles (NPs) synthetize from biogenic source, such as their simplicity and cost benefits, they have been used in the development of sensors applied in the determination of contaminants present in environmental samples and in the catalytic reduction of organic and inorganic contaminants. Therefore, this review describes the synthesis, mechanisms, characterization, and environmental analytical applications of NPs obtained by biogenic synthesis as well as the perspectives and challenges of these NPs.     

Spectro-Microscopic Techniques for Studying Nanoplastics in the Environment and in Organisms

Nanoplastics (NPs), small (<1 μm) polymer particles formed from bulk plastics, are a potential threat to human health and the environment. Orders of magnitude smaller than microplastics (MPs), they might behave differently due to their larger surface area and small size, which allows them to diffuse through organic barriers. However, detecting NPs in the environment and organic matrices has proven to be difficult, as their chemical nature is similar to these matrices. Furthermore, as their size is smaller than the (spatial) detection limit of common analytical tools, they are hard to find and quantify. We highlight different micro-spectroscopic techniques utilized for NP detection and argue that an analysis procedure should involve both particle imaging and correlative or direct chemical characterization of the same particles or samples. Finally, we highlight methods that can do both simultaneously, but with the downside that large particle numbers and statistics cannot be obtained.     

Nanosorbents as Materials for Extraction Processes of Environmental Contaminants and Others

The aim of this work focuses on the application of nanomaterials (NMs) in different sorptive extraction techniques for the analysis of organic contaminants from environmental samples of distinct matrix compositions. Without any doubt, the integration of specific NMs such as carbonaceous nanomaterials, magnetic nanoparticles (MNPs), metal–organic frameworks (MOFs), silica nanoparticles, and ion-imprinted NPs with solid-phase extraction techniques counting d-SPE, solid-phase microextraction (SPME), and stir bar sorptive extraction (SBSE) impact on the improvements in analytical performance. The application of NMs as sorbents in the extraction of organic pollutants in environmental samples allows for providing better sensitivity, repeatability, reproducibility, and reusability.     

Catalytic activity of novel thermoplastic/cellulose-Au nanocomposites prepared by cryomilling

Due to environmental concerns, increasing attention has been focused on the application and preparation of biobased polymers and their blends. In this study, cellulose, the most spread biopolymer on Earth, was used in the preparation of novel cotton/polypropylene-Au and cotton/polyethylene-Au nanocomposites via a green mechanochemical approach. First, mechanoradicals were generated by ball milling of the cotton and thermoplastics under cryo conditions, and then, these radicals were used in the reduction of Au ions to Au nanoparticles (Au NPs). Nanocomposites were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS). The application of mechanochemistry in obtaining the cotton/thermoplastic blends allowed homogenous and fine blending of the samples and in addition, excluded the usage of toxic solvents. Since Au NPs exhibit a wide range of applications, e.g., in catalysis, cotton/thermoplastic-Au nanocomposites were used to catalyze the reduction reaction of 4-nitrophenol to
4-aminophenol, followed by UV-Vis spectroscopy. Finally, the hydrophobicity of the nanocomposites was alternated by tuning the blend composition. In the prepared nanocomposites, cotton and thermoplastics acted as very good supporting matrices for the Au NPs and provided satisfactory access to the NPs.     

Use of alkaline or enzymatic sample pretreatment prior to characterization of gold nanoparticles in animal tissue by single-particle ICPMS

Inductively coupled plasma mass spectrometry in single-particle mode (spICPMS) is a promising method for the detection of metal-containing nanoparticles (NPs) and the quantification of their size and number concentration. Whereas existing studies mainly focus on NPs suspended in aqueous matrices, not much is known about the applicability of spICPMS for determination of NPs in complex matrices such as biological tissues. In the present study, alkaline and enzymatic treatments were applied to solubilize spleen samples from rats, which had been administered 60-nm gold nanoparticles (AuNPs) intravenously. The results showed that similar size distributions of AuNPs were obtained independent of the sample preparation method used. Furthermore, the quantitative results for AuNP mass concentration obtained with spICPMS following alkaline sample pretreatment coincided with results for total gold concentration obtained by conventional ICPMS analysis of acid-digested tissue. The recovery of AuNPs from enzymatically digested tissue, however, was approximately four times lower. Spiking experiments of blank spleen samples with AuNPs showed that the lower recovery was caused by an inferior transport efficiency of AuNPs in the presence of enzymatically digested tissue residues.     

Speciation of metal(loid)s in environmental samples by X-ray absorption spectroscopy: A critical review

Element specificity is one of the key factors underlying the widespread use and acceptance of X-ray absorption spectroscopy (XAS) as a research tool in the environmental and geo-sciences. Independent of physical state (solid, liquid, gas), XAS analyses of metal(loid)s in complex environmental matrices over the past two decades have provided important information about speciation at environmentally relevant interfaces (e.g. solid–liquid) as well as in different media: plant tissues, rhizosphere, soils, sediments, ores, mineral process tailings, etc. Limited sample preparation requirements, the concomitant ability to preserve original physical and chemical states, and independence from crystallinity add to the advantages of using XAS in environmental investigations. Interpretations of XAS data are founded on sound physical and statistical models that can be applied to spectra of reference materials and mixed phases, respectively. For spectra collected directly from environmental matrices, abstract factor analysis and linear combination fitting provide the means to ascertain chemical, bonding, and crystalline states, and to extract quantitative information about their distribution within the data set. Through advances in optics, detectors, and data processing, X-ray fluorescence microprobes capable of focusing X-rays to micro- and nano-meter size have become competitive research venues for resolving the complexity of environmental samples at their inherent scale. The application of μ-XANES imaging, a new combinatorial approach of X-ray fluorescence spectrometry and XANES spectroscopy at the micron scale, is one of the latest technological advances allowing for lateral resolution of chemical states over wide areas due to vastly improved data processing and detector technology.     

The chemical state of arsenic in minerals of environmental interest--an XPS and an XAES study

A systematic analytical study using X-ray photoelectron spectroscopy (XPS) and X-ray induced Auger electron spectroscopy (XAES) has been carried out to characterize the chemical state of arsenic in complex environmental samples. The conventional approach, which relies on the chemical shift of the core levels As3d, provides ambiguous results in determining the chemical environment of arsenic. A more accurate approach, based on the Auger parameter and on the Wagner (Chemical State) plot, which combines AsLMM kinetic energy and As3d binding energy, was adopted. This novel method for determining the chemical state of arsenic was employed to completely characterize arsenic in complex environmental samples.     

Occurrence and chemical speciation analysis of organotin compounds in the environment: A review

Environmental concerns regarding organotin compounds have increased remarkably in the past 20 years, due in large part to the use of these compounds as active components in antifouling paints [mainly tributyltin (TBT)] and pesticide formulations [mainly triphenyltin (TPhT)]. Their direct introduction into the environment, their bio-accumulation and the high toxicity of these compounds towards “non-target” organisms (for example: oysters and mussels) causes environmental and economic damage around the world. As a consequence, the presence and absence of organotin compounds is currently monitored in a range of environmental matrices (e.g., water, sediment and shellfish) to examine the utility of controls meant to regulate the level of contamination as required in some EC Directives and the Water Framework Directive 2000/60/EC. To evaluate the environmental distribution and fate of these compounds and to determine the effectives of legal provisions adopted by a number of countries, a variety of analytical methods have been developed for organotin determination in the environment. Most of these methods include different steps such as extraction, derivatisation and clean up. The aim of the present review is to evaluate the environmental distribution, fate and chemical speciation of organotin compounds in the environment.     

Measurement of nanoparticles by light-scattering techniques

Nanoparticles (NPs), due to their unique physical and chemical properties, especially their minute particle size (?100 nm), find applications in numerous industrial, commercial and consumer products. After their end-user applications, these NPs find their way into the environment and food products. The NPs so discharged need to be quantified accurately to determine their toxicity and exposure levels.At this time, there is a need to develop a unified method for their determination. There are plenty of techniques available in the market that were initially used for colloidal particles (e.g., microscopy, spectroscopy and the recent addition of magnetic resonance), but each of these techniques has a certain degree of uncertainty.Further, sample homogeneity, sample preparation, instrument-operating procedures, and statistical practices are likely to add to the complexity of the problem. In this context, this review attempts to understand the widely-used light-scattering techniques, including their theory, practice and real-world use in determination of NPs in environmental and food applications.     

Imidazolium-based zwitterionic surfactant: a new amphiphilic Pd nanoparticle stabilizing agent

Palladium nanoparticles (NPs) with an average size of 3.4 nm were prepared in water using imidazolium-based surfactant 3-(1-dodecyl-3-imidazolio)propanesulfonate (ImS3-12) as a stabilizer. The Pd NPs are highly dispersible in water and chloroform and were characterized by transmission electron microscopy, energy-dispersive X-ray spectroscopy, powder X-ray diffraction, and dynamic light scattering. The results indicate that in water the NP surface is covered with a double layer of ImS3-12 molecules. The NPs were effective in the aqueous biphasic hydrogenation of cyclohexene, with easy recycling and no loss of catalytic activity after four successive runs.     

X-ray and UV photoelectron spectroscopy of Ag nanoclusters

The main purpose of the present work is to analyze a series of Ag nanoparticles (NPs) with different size or ligand functionalization by using X-ray photoelectron spectroscopy (XPS) and to identify the differences in the band-shape and energy peak position of photoemission spectra due to the particle dimension. A transmission electron microscopy characterization was performed, to verify the consistency of the results. Three types of samples were prepared starting from AgNO₃ water solution and adding different capping agents. In the first two cases, the formation of NPs was promoted by the reduction of silver ions Ag⁺¹ to metallic Ag⁰ through the addition of sodium borohydride, whereas in the last case, it was triggered by the exposure to UV light. Depending on the size of the NPs, a different physical behavior can be recognized. NPs with diameter of about 5 nm are characterized by the phenomenon of localized surface plasmon resonance (LSPR). The other type of samples having a diameter of about 1.5 nm presents discrete energy levels instead of electronic bands, and in this case, a typical fluorescence phenomenon can be observed. In the latter case, we can refer to such systems as nanoclusters. The XPS analyses were focused on the Ag 3D spectra looking for the possible shifts of the Ag doublet as a function of the particles size. The ultraviolet photoelectron spectroscopy with He II source was used for the investigation of possible changes in the valence band.     

Determining nanomaterials in food

Nanotechnology has emerged as one of the most innovative technologies and has the potential to improve food quality and safety. However, there are a few studies demonstrating that nanomaterials (NMs) are not inherently benign.This review highlights some current applications of NMs in food, food additives and food-contact materials, and reviews analytical approaches suitable to address food-safety issues related to nanotechnology.We start with a preliminary discussion on the current regulatory situation with respect to nanotechnology in relation to foods. We cover sample preparation, imaging techniques (e.g., electron microscopy, scanning electron microscopy and X-ray microscopy), separation methods (e.g., field-flow fractionation and chromatographic techniques) and detection or characterization techniques (e.g., light scattering, Raman spectroscopy and mass spectrometry). We also show the first applications of the analysis of NMs in food matrices.     

Mixed Co/Fe oxide nanoparticles in block copolymer micelles

Small iron oxide and Co-doped iron oxide nanoparticles (NPs) were synthesized in a commercial amphiphilic block copolymer, poly(ethylene oxide)-b-poly(methacrylic acid) (PEO 68-b-PMAA8), in aqueous solutions. The structure and composition of the micelles containing guest molecules (metal salts) or NPs (metal oxides) were studied using transmission electron microscopy, dynamic light scattering, X-ray photoelectron spectroscopy, and X-ray powder diffraction. The enlarged micelle cores after incorporation of metal salts are believed to be formed by both PMAA blocks containing metal species and penetrating PEO chains. The nanoparticle size distributions in PEO 68-b-PMAA8 were determined using small-angle X-ray scattering (SAXS) in bulk. Two independent methods for SAXS data interpretation for comprehensive analysis of volume distributions of metal oxide NPs showed presence of both small particles and larger entities containing metal species which are ascribed to organization of block copolymer micelles in bulk. The magnetometry measurements revealed that the NPs are superparamagnetic and their characteristics depend on the method of the NP synthesis. The important advantage of the PEO 68-b-PMAA8 stabilized magnetic nanoparticles described in this paper is their remarkable solubility and stability in water and buffers.     

In situ coarsening study of inverse micelle-prepared Pt nanoparticles supported on γ-Al2O3: pretreatment and environmental effects

The thermal stability of inverse micelle prepared Pt nanoparticles (NPs) supported on nanocrystalline γ-Al(2)O(3) was monitored in situ under different chemical environments (H(2), O(2), H(2)O) via extended X-ray absorption fine-structure spectroscopy (EXAFS) and ex situ via scanning transmission electron microscopy (STEM). Drastic differences in the stability of identically synthesized NP samples were observed upon exposure to two different pre-treatments. In particular, exposure to O(2) at 400 °C before high temperature annealing in H(2) (800 °C) was found to result in the stabilization of the inverse micelle prepared Pt NPs, reaching a maximum overall size after moderate coarsening of ～1 nm. Interestingly, when an analogous sample was pre-treated in H(2) at ～400 °C, a final size of ～5 nm was reached at 800 °C. The beneficial role of oxygen in the stabilization of small Pt NPs was also observed in situ during annealing treatments in O(2) at 450 °C for several hours. In particular, while NPs of 0.5 ± 0.1 nm initial average size did not display any significant sintering (0.6 ± 0.2 nm final size), an analogous thermal treatment in hydrogen leads to NP coarsening (1.2 ± 0.3 nm). The same sample pre-dosed and annealed in an atmosphere containing water only displayed moderate sintering (0.8 ± 0.3 nm). Our data suggest that PtO(x) species, possibly modifying the NP/support interface, play a role in the stabilization of small Pt NPs. Our study reveals the enhanced thermal stability of inverse micelle prepared Pt NPs and the importance of the sample pre-treatment and annealing environment in the minimization of undesired sintering processes affecting the catalytic performance of nanosized particles.     

Selective palladium-loaded MIL-101 catalysts

Palladium nanoparticles (NPs) of different mean particle size have been synthesized in the host structure of the porous coordination polymer (or metal-organic framework: MOF) MIL-101. The metal-organic chemical vapor deposition method was used to load MIL-101 with the Pd precursor complex [(η(5)-C(5)H(5))Pd(η(3)-C(3)H(5))]. Loadings higher than 50 wt.% could be accomplished. Reduction of the Pd precursor complex with H(2) gave rise to Pd NPs inside the MIL-101 (Pd@MIL-101). The reduction conditions, especially the temperature, allows us to make size-conform (size of the Pd NPs correlates with the size of the cavities of the host structure of MIL-101) and undersized Pd NPs. The Pd@MIL-101 samples were characterized by X-ray diffraction, IR spectroscopy, Brauner-Emmett-Teller (BET) analysis, elemental analysis, and transmission electron microscopy (TEM). Catalytic studies, hydrogenation of ketones, were performed with selected Pd@MIL-101 catalysts. Activity, selectivity, and recyclability of the catalyst family are discussed.     

Quantification of nanoparticles in aqueous food matrices using Particle-Induced X-ray Emission

Nanoparticles (NPs) of SiO(2) (15 nm) or Ag (20 - 40 nm) were dispersed in water, coffee and milk at several aqueous dilutions. The NPs dispersions concentrations were quantified with an ion beam technique: Particle-Induced X-ray Emission. Additional measurements in relation to the state of the NPs dispersions were done: particle size distribution by centrifuge liquid sedimentation and the extreme surface composition by X-ray photoelectron spectroscopy. The particle size distribution of SiO(2) and Ag NPs dispersions in water and Ag NPs in coffee remained mostly as primary particles with hydrodynamic diameters close to the reported pristine NPs diameter. SiO(2) NPs agglomerated in coffee. In milk, both NPs presented an adsorption with milk lipids. Extreme surface composition corroborated adsorption in milk and showed that SiO(2) agglomerates adsorb some coffee components. A linear tendency in the measurement of the concentration dilutions of all dispersions was measured, and a lack of media influence in the slope of each curve was found. Limits of detection with the current setup were estimated at 0.5 and 0.3 mg/ml for SiO(2) and Ag NPs, respectively.     

Synthesis, characterization, and self-assembly of protein lysozyme monolayer-stabilized gold nanoparticles

Lysozyme monolayer-protected gold nanoparticles (Au NPs) which are hydrophilic and biocompatible and show excellent colloidal stability (at low temperature, ca. 4 degrees C), were synthesized in aqueous medium by chemical reduction of HAuCl4 with NaBH4 in the presence of a familiar small enzyme, lysozyme. UV-vis spectra, transmission electron microscopy (TEM), atomic force microscopy, and X-ray photoelectron spectroscopy characterization of the as-prepared nanoparticles revealed the formation of well-dispersed Au NPs of ca. 2 nm diameter. Moreover, the color change of the Au NP solution as well as UV-vis spectroscopy and TEM measurements have also demonstrated the occurrence of Ostwald ripening of the nanoparticles at low temperature. Further characterization with Fourier transform infrared spectroscopy (FTIR) and dynamic light scattering indicated the formation of a monolayer of lysozyme molecules on the particle surface. FTIR data also indicated the intactness of the protein molecules coated on Au NPs. All the characterization results showed that the monodisperse Au NPs are well-coated directly with lysozyme. Driven by the dipole-dipole attraction, the protein-stabilized Au NPs self-assembled into network structures and nanowires upon aging under ambient temperature. On the basis of their excellent colloidal stability, controlled self-assembly ability, and biocompatible surface, the lysozyme monolayer-stabilized Au NPs hold great promise for being used in nanoscience and biomedical applications.     

High-performance liquid chromatography-UV diode array,inductively coupled plasma mass spectrometry (ICMPS) and orthogonal acceleration time-of-flight mass spectrometry (oa-TOFMS) applied to the simultaneous detection and identification of metabolites of 4-bromoaniline in rat urine

Summary The paper describes the role and tasks of environmental analysis and monitoring. It emphasises the leading role played by gas chromatography, especially when coupled with suitable sample preparation. This is demonstrated by some literature evidence and mainly by the author's original work on the design of sample preparation apparatus and development of GC-based methods of determination of a wide variety of organic pollutants in environmental samples. A typical example is the physical speciation of PAHs and PCBs in river environment with the use of a home-made filtration vessel coupled with SPE cartridges to prepare samples for GC-MS analysis; thin layer head space with self-generation of aqueous concentrate to prepare humane urine samples for DAI (direct aqueous injection)-GC-ECD analysis for the content of volatile chloro-organic compounds; studies on capillary denuders in sampling organic air pollutants; passive dosimeters in indoor air quality measurements; design and application of thermal desorbers for the introduction of analytes into GC columns and modification of a speciation analyser for organometalic environmental pollutants. Presented at Balaton Symposium '01 on High-Performance Separation Methods, Siófok, Hungary, September 2–4, 2001