A harmonized European framework for method validation to support research on emerging pollutants

Any investigation of environmental processes related to chemical substances or their effects depends on reliable, comparable analytical data. This also holds true for the impact of climate change on occurrence, distribution and effects of emerging pollutants, with respect to which there is particular concern regarding the reliability of analytical data, due to lack of harmonization in method validation and requirements for quality assurance and quality control (QA/QC).We present a recent European approach to developing a harmonized framework for method validation, QA/QC and provision of environmental data on emerging pollutants. The validation approach has been tested and improved by three case studies. We outline the main concept of the validation approach as well as the results of the case studies. This European validation framework turned out to be a feasible tool to check the fitness for purpose of analytical methods and to improve the reliability of environmental analytical data, particularly for emerging pollutants.     

Optimization of analytical quality control for long-term monitoring of metals and volatile organic compounds in groundwater

Statistical analysis of historical results for matrix spikes (MS), matrix spike duplicates (MSD), and laboratory control samples (LCS) from aqueous samples analyzed for metals and volatile organic compounds was performed to determine whether the MS/MSD provided substantive information apart from that provided by the LCS. The statistical analysis showed that the mean recovery of all analytes from MS/MSD closely approximated the mean recovery of all analytes from the LCS. Average bias, skewness, and kurtosis were also assessed for both data sets. The evaluation provided strong evidence for the use of LCS recoveries as performance indicators of probable MS/MSD recoveries of metals and volatile organic compounds from groundwater.     

Collaborative sampling trial in the context of quality assurance in the German marine monitoring programme for the North Sea and the Baltic Sea

This paper presents the assessment of a collaborative trial in sampling in the Baltic Sea in the framework of quality assurance in the German marine monitoring programme for the North Sea and the Baltic Sea. The objective of investigations was to determine the influence of sampling on analytical results for selected monitoring parameters and to harmonize the procedure for sampling of sea water to a large extent. In these studies the staff of three vessels took replicate sea water samples, 1 m below the surface and below the halocline, at two monitoring stations. Mass concentration mean values for different nutrient parameters were obtained from each sample, all in one laboratory. Data produced from the hierarchical design were treated with robust analysis of variance (ANOVA) to generate uncertainty estimates, as standard uncertainties (“u” expressed as standard deviation), for geochemical variation (s _geochem), primary sampling (s _sampling), and chemical analysis (s _analysis). Geochemical variation dominated the total variance in all cases. Sampling and analytical uncertainties contributed together up to 15% of the total variance and had a relative measurement uncertainty (u%) of less than 2% for all the parameters investigated. Thus for this study the sampling protocol and the analytical method could be regarded as fit-for-purpose. M. Gluschke was formerly affiliated to the Federal Environmental Agency, P.O. Box 33 00 22, 14191 Berlin, Germany.     

Analytical methods for the determination of fluoroquinolones in solid environmental matrices

We present a critical review of the analytical procedures proposed in the past decade for the determination of fluoroquinolones (FQs) by chromatographic methods in solid environmental matrices. We emphasize the overall analytical procedure, from sampling to final detection. We devote special attention to sample preparation, highlighting the problems involved in the analysis of real complex matrices, mainly soil, sediment, manure and sludge. We compare the different extraction techniques in terms of efficiency, time taken and environmental impact, pointing out advantages and drawbacks. We provide an overview on the role of photochemistry in the degradation of FQs in soils and sediments, and we underline the central position of analytical chemistry in environmental monitoring because FQs are emerging pollutants.     

Amino functionalized magnetic covalent organic framework for magnetic solid-phase extraction of sulfonylurea herbicides in environmental samples from tobacco land

An amino-functionalized magnetic covalent organic framework composite TpBD-(NH₂)₂@Fe₃O₄ (Tp=Tp1,3,5-triformylphloroglucinol, BD-(NH₂)₂ is 3,3',4,4'-biphenyltetramine) was prepared by post-synthesis modification. Due to its abundant benzene rings and amino groups, large specific surface area and porous structure, the prepared TpBD-(NH₂)₂@Fe₃O₄ exhibits high extraction efficiency toward sulfonylurea herbicides. Based on this, a new method of magnetic solid-phase extraction with TpBD-(NH₂)₂@Fe₃O₄ as the sorbent combined with high-performance liquid chromatography and ultraviolet detection was developed for trace analysis of sulfonylurea herbicides in environmental water, soil and tobacco leaves samples from tobacco land. Under the optimized conditions, the limits of detection within 0.05–0.14 μg/L were achieved with a high enrichment factor of 217-260-fold, and the relative standard deviations were 4.9–7.5% (n = 7, c = 0.5 μg/L). The linear range was around three orders of magnitude with the square of correlation coefficient higher than 0.9936. The method was applied to analyze five sulfonylurea herbicides in the environmental water, soil, and tobacco leave samples collected from tobacco land. No sulfonylurea herbicides were detected in these samples. The recoveries of target sulfonylurea herbicides in spiked environmental water, soil, and tobacco leaf samples were found in the range of 90.7–104, 70.7–99.0, and 59.3–97.8%, respectively. The results illustrate that the established TpBD-(NH₂)₂@Fe₃O₄-magnetic solid-phase extraction- high-performance liquid chromatography–ultraviolet detection method is efficient for the analysis of trace sulfonylurea herbicides in environmental samples.     

An overview on the accumulation, distribution, transformations, toxicity and analytical methods for the monitoring of persistent organic pollutants

Recent years have seen an upsurge of interest in developing low cost and reliable methods for the detection and precise determination of ultra-trace concentrations of persistent organic pollutants (POPs), because of their bioaccumulation, transformation and toxicity. Therefore, a comprehensive review with 108 references referring to the distribution, source, accumulation, transformation, types and toxicity of polychlorinated biphenyls (PCBs) and organochlorine pesticides (OCPs) is presented. The review also aims to highlight on the current best practices for the analysis of PCBs and OCPs. Moreover, with the signing of the Stockholm convention on POPs and the development of global monitoring programs, there is an increased need for laboratories in developing countries to determine such class of chemicals. A major focus revealed the need for low cost methods that can be implemented easily in developing countries such as electrochemical techniques.     

An overview of laboratory performance studies conducted by the IAEA for marine pollution studies of metals and organic contaminants

Aspects of the International Atomic Energy Agency (IAEA) Analytical Quality Control Services (AQCS) for marine environmental studies are discussed, focusing on recent laboratory performance studies (LPS) and the production of reference materials for trace metals and organic compounds in various marine matrices. The IAEA has organized seventeen global interlaboratory studies for a range of organic contaminants. Of note has been the inclusion of numerous polychlorinated biphenyl congeners (PCBs) and some sterols of anthropogenic origin. Concurrently, there have been eleven worldwide intercomparison exercises for trace metals in the marine environment, most of which included methylmercury. Although such interlaboratory studies can help improve performance in individual laboratories and regional laboratory networks, the results reveal that problems remain in the determination of some metals and many organic contaminants.     

Metal–organic framework based in‐syringe solid‐phase extraction for the on‐site sampling of polycyclic aromatic hydrocarbons from environmental water samples

In‐syringe solid‐phase extraction is a promising sample pretreatment method for the on‐site sampling of water samples because of its outstanding advantages of portability, simple operation, short extraction time, and low cost. In this work, a novel in‐syringe solid‐phase extraction device using metal–organic frameworks as the adsorbent was fabricated for the on‐site sampling of polycyclic aromatic hydrocarbons from environmental waters. Trace polycyclic aromatic hydrocarbons were effectively extracted through the self‐made device followed by gas chromatography with mass spectrometry analysis. Owing to the excellent adsorption performance of metal–organic frameworks, the analytes could be completely adsorbed during one adsorption cycle, thus effectively shortening the extraction time. Moreover, the adsorbed analytes could remain stable on the device for at least 7 days, revealing the potential of the self‐made device for on‐site sampling of degradable compounds in remote regions. The limit of detection ranged from 0.20 to 1.9 ng/L under the optimum conditions. Satisfactory recoveries varying from 84.4 to 104.5% and relative standard deviations below 9.7% were obtained in real samples analysis. The results of this study promote the application of metal–organic frameworks in sample preparation and demonstrate the great potential of in‐syringe solid‐phase extraction for the on‐site sampling of trace contaminants in environmental waters.     

Analytical chemistry of the persistent organic pollutants identified in the Stockholm Convention: A review

Persistent organic pollutants (POPs) are major environmental concern due to their persistence, long-range transportability, bio-accumulation and potentially adverse effects on living organisms. Analytical chemistry plays an essential role in the measurement of POPs and provides important information on their distribution and environmental transformations. Much effort has been devoted during the last two decades to the development of faster, safer, more reliable and more sensitive analytical techniques for these pollutants. Since the Stockholm Convention (SC) on POPs was adopted 12 years ago, analytical methods have been extensively developed. This review article introduces recent analytical techniques and applications for the determination of POPs in environmental and biota samples, and summarizes the extraction, separation and instrumental analyses of the halogenated POPs. Also, this review covers important aspects for the analyses of SC POPs (e.g. lipid determination and quality assurance/quality control (QA/QC)), and finally discusses future trends for improving the POPs analyses and for potential new POPs.