Hybrid materials based on polymethylsilsesquioxanes containing Fe,Pt, and Fe–Pt metallic nanoparticles

New hybrid materials based on Pt, Fe, and Pt–Fe nanoparticles stabilized in a matrix of polymethylsilsesquioxane nanogel and ultrahigh molecular weight polyethylene (UHMWPE) were prepared. Metal vapor synthesis was used to produce mono- and bimetallic nanoparticles. It was shown that organosilicon nanogel effectively stabilizes Pt nanoparticles with an average size of 0.9 nm. Using the nanogel results in the formation of superparamagnetic Fe particles 3–5 nm in size that consist of ferromagnetic Fe⁰ core and antiferromagnetic shells of Fe oxides. It is established that using an organosilicon matrix in the formation of Pt-Fe/UHMWPE systems helps reduce the average particle size of Fe in the material from 6.5 to 4.5 nm and narrow their particle size distribution. The composition, magnetic and electronic characteristics of the nanocomposites are studied via transmission electron microscopy, X-ray photoelectron spectroscopy, Mössbauer spectroscopy, XANES, and EXAFS.     

Geometrical structures of trimetallic Ag–Pd–Pt and Au–Pd–Pt clusters up to 147 atoms

Structural Chemistry - The core-shell morphologies of (PdPt)coreAgshell and (PdPt)coreAushell up to 147 atoms are investigated. The structural optimization of M–Pd–Pt (M = Ag or Au) is...     

Synthesis,characterization and electrocatalytic activity for ethanol oxidation of carbon supported Pt,Pt–Rh,Pt–SnO2 and Pt–Rh–SnO2 nanoclusters

Nanoclusters of Pt, Pt–Rh, Pt–SnO₂ and Pt–Rh–SnO₂ were successfully synthesized by polyol method and deposited on high-area carbon. HRTEM and XRD analysis revealed two phases in the ternary Pt–Rh–SnO₂/C catalyst: solid solution of Rh in Pt and SnO₂. The activity of Pt–Rh–SnO₂/C for ethanol oxidation was found to be much higher than Pt/C and Pt–Rh/C and also superior to Pt–SnO₂/C. Quasi steady-state measurements at various temperatures (30–60 °C), ethanol concentrations (0.01–1 M) and H₂SO₄ concentrations (0.02–0.5 M) showed that Pt–Rh–SnO₂/C is about 20 times more active than Pt/C in the potential range of interest for the fuel cell application.     

A molecular theory of stress–strain relationship of spherulitic materials

A primitive molecular theory for stress–strain relationship of spherulitic polymers is presented based on a consideration of changes in conformational free energy in the tie chains and floating chains located between crystalline lamellae within an ideal spherulite which is assumed to undergo an affine deformation. Numerical stress–strain curves are calculated as a function of temperature, crystallinity, and tie chain fraction.     

Cyclic voltammetric behavior of Pd–Pt–Rh ternary alloys

The electrochemical behavior of Pd–Pt–Rh alloys has been investigated using cyclic voltammetry (CV). The alloys were prepared by electrochemical codeposition as limited volume electrodes (less than 1 m in thickness). The morphology of the alloy surface and bulk compositions were examined by the SEM/EDAX method. Surface oxides generation (oxygen adsorption) and oxides reduction (oxygen desorption) currents together with hydrogen adsorption and hydrogen absorption signals can be distinguished on CV curves. During potential cycling through the full hydrogen–oxygen potential range Rh and Pd are preferentially dissolved, which is reflected in a dramatic transformation in the voltammogram shape. The composition changes involve not only the surface but also some atomic layers beneath the surface.     

Facile Synthesis of Luminescent Ir–Pt–Ir Trimetallic Complexes

A new class of luminescent, heterotrimetallic supramolecular constructs partnering two bis-cyclometalated iridium centers with a diimine platinum acetylide center is introduced. Whereas most supramolecular constructs featuring cyclometalated iridium involve elaborate bridging ligands and are prepared under forcing conditions with low to moderate yields, the three Ir–Pt–Ir complexes described here are prepared at room temperature from simple precursors and isolated in near-quantitative yields. ESI-MS, NMR spectroscopy, and diffusion ordered spectroscopy confirm the identity and homogeneity of the trimetallic products. In comparison with monometallic model complexes, analysis of UV/Vis absorption, steady-state photoluminescence and time-resolved emission reveals the impacts of supramolecular assembly on the photophysical properties. UV/Vis absorption and cyclic voltammetry suggest perturbation of some frontier orbital energies as a result of assembly, and the emission spectra and lifetimes reveal efficient excited-state energy transfer via a Dexter mechanism, and show that the site of luminescence (platinum or iridium) depends on the identity of the cyclometalating ligand bound to iridium.     

Unique Possibilities of Dynamic Metal–Polymer Interactions in Selective Hydrogenation

Rationally designed polymers can function as supports or promoters for metal catalysts, imparting distinct catalytic properties in selective hydrogenation. With strongly metal–ligating functional groups, mobile polymer chains can spontaneously decorate the metal catalyst surfaces under mild conditions, forming stable metal–polymer interfaces. We have termed this phenomenon ‘dynamic metal–polymer interaction (DMPI),’ which can be roughly considered as an organic version of the strong metal–support interaction (SMSI) concept. The polymer chains that dynamically interact with the metal surface can control the adsorption of reactants and products through competitive adsorption, significantly improving selectivity and catalyst stability. One of the remarkable advantages of using polymers as catalytic materials is that their molecular structures, such as molecular weight, crystallinity, and chemical functionality, can be tailored using rich organic chemistry. This, in turn, allows us to precisely tune the metal–polymer interactions and catalytic properties. In this Concept, we will discuss how metal–polymer interfaces can be designed and utilized for selective hydrogenation, with a particular emphasis on the industrially relevant acetylene partial hydrogenation reaction.     

Effect of reaction conditions on surface properties of TEOS–TBOT–PDMS hybrid materials

Hybrid materials based on tetraethoxysilane (TEOS), tetrabutyl orthotitanate (TBOT), and hydroxyl terminated polydimethyl siloxane (PDMS) have been prepared and characterized. The effects of HCl concentration and PDMS molecular weight (M_W) have been analysed. The physical and chemical characteristics have been discussed based on the results obtained from the characterization by Raman spectroscopy, nitrogen adsorption, mercury intrusion porosimetry and inverse gas chromatography (IGC). Specific surface areas (SSA) and pore volumes increase with HCl concentration and are independent on the PDMS Mw. SSA values as high as 300 m² g⁻¹ have been obtained for hybrid materials prepared with HCl:(TEOS + TBOT) concentration of 0.3 and PDMS Mw of 550 g mol⁻¹. These materials present the higher pore volumes and lower pore sizes. However, for HCl:(TEOS + TBOT) concentration of 0.5, only macroporous materials are obtained with SSA values as low as 2–4 m² g⁻¹, and pore sizes close to 10 μm. In general the presence of Ti on the SSA and porosities give a little decrease in such values. Surface energies are consistent with those of organic–inorganic materials. Dispersive surface energies are higher for the Si–Ti hybrid materials and, for all of them, they decrease with both HCl concentration and PDMS Mw. This result can be assigned to the presence of a higher concentration of PDMS (or CH₃ groups) on the surface of the hybrid material as well as the presence of disordered anatase-like structures. On the other hand, the acid and base properties are dependent on both HCl concentration and PDMS Mw. It has been observed that the acid and base parameters of the Si–Ti hybrid materials are influenced by the disorder degree of the amorphous titanium oxide present in them. As the disorder decrease both acid and base parameters increase.     

Electrochemical determination of the surface composition of Pd–Pt core–shell nanoparticles

Different amounts of Pt atoms were deposited onto the surface of Pd nanoparticles supported on carbon black by hydroquinone reduction method in anhydrous ethanol. Here, we surveyed electrochemical probing of surface compositions of Pd–Pt surface alloys. They were calculated from hydrogen desorption, carbon monoxide adlayer oxidation, and reduced carbon dioxide oxidation charges. The surface composition of Pt drastically increased up to Pt[0.3]/Pd/C (23.1 at.% of Pt) and then approached that of pure Pt with the moderate rate of increase.     

Application of TA–MS combined with PulseTA for characterization of materials

The thermal behavior of the anticancer drug-irinotecan was measured by Thermogravimetry–Differential thermal analysis (TG–DTA) to explore the application of TG–DTA in nanomedicine firstly. The TG–DTA result showed that the irinotecan was oxidized completely before 700 °C. When irinotecan was loaded onto nanosized mesoporous silica spheres, the loading capacity for irinotecan measured by TG–DTA was about 9.11% in the irinotecan/mesoporous SiO₂ composite, similar to the typical UV–Vis spectra results (10.5%), which showed that TG–DTA characterization provided an alternative method to determine the drug loading amount on inorganic carriers. Secondly, Thermogravimetry–Differential scanning calorimetry–Mass Spectrometry coupling techniques (TG–DSC–MS) were used to characterize the hydrogen adsorption temperature and capacity of TiCr_1.2 (V-Fe)_0.6 alloy. The MS result showed that the released region of hydrogen was 250–500 °C, which was consistent with the TG–DSC results. Lastly, TA–MS combined with pulse thermal analysis (PulseTA) were used for a simultaneous characterizing study in the changes of mass, determination and quantitative calibration of the evolved nitrogen formed during the thermal decomposition of the InN powder. The results showed that relative error of this method between measured value and theoretical value was 2.67% for the quantitative calibration of evolved N₂. It shows that TA–MS combined with PulseTA techniques offer a good tool for the quantification of the evolved nitrogen in the InN powder.     

Functionalization of mesostructured inorganic–organic and porous inorganic materials

The capability to functionalize the interior channels and/or high internal surface areas of mesostructured inorganic–organic or porous inorganic solids with specific organic or inorganic moieties has dramatically expanded the potential applications for these versatile materials in catalysis, separations, optical and opto-electronic devices, drug delivery, sensors, and energy conversion. Key to the widespread application of these materials are the various synthetic schemes that have been developed to provide control over the types of species incorporated and, more importantly, their distributions within the mesostructured hosts. Furthermore, multiple active species can often be independently incorporated and collectively optimized to yield multifunctional properties that widen application prospects. Several recent developments and examples in this rapidly growing field of materials chemistry and engineering are highlighted and discussed.     

Electron beam writing of epoxy based sol–gel materials

We report the use of an epoxy based hybrid sol–gel material as negative resist for electron beam lithography (EBL). The matrix has been prepared starting from 3-glycidoxypropyltrimethoxysilane as specific organic–inorganic precursor and the synthesis has been strictly controlled in order to preserve the epoxy ring and to obtain a proper inorganic cross-linking degree. The film has been exposed to an electron beam, inducing the polymerization of the organic part and generating the film hardening. Preliminary results of a resolution test on the synthesized epoxy based sol–gel material, performed with electron beam lithography, are presented. Structures below 300 nm were achieved. The direct nanopatterning of this hybrid sol–gel system simplify the nanofabrication process and can be exploited in the realization of photonic devices. A demonstration has been carried out doping the hybrid films with commercial Rhodamine 6G and reproducing an already tested laser structure.     

Sol–gel synthesis and structure of silica hybrid materials

In this work the research results on the sol–gel synthesis and structure of silica nanocomposites, containing carrageenan and their application as carriers for cell immobilization were described. The samples were prepared at room temperature by replacing different quantity of the inorganic precursor with κ-carrageenan. For studying the structure of the synthesized hybrids the following methods were used: FT-IR, XRD, BET-Analysis, SEM, AFM and Roughness Analysis. The influence of the type of silicon precursors, nature and quantity of organic component on the structure, surface area, design and size of nanostructures was established. The possibility of application of the synthesized biocatalysts in an enzyme degradation process of the toxic, carcinogenic and mutagenic substances benzonitrile, fumaronitrile, o-, m-, and p-tolunitriles was investigated at batch experiments. A two-step biodegradation process in a column bioreactor of fumaronitrile was followed. After operation of the system for 8 h at a flow rate 45 mL h^?1 and at 60 °C, the overall conversion was 89%, showing a good stability of the developed process.     

Sensing abilities of materials prepared by sol–gel technology

The advantages of the sol–gel technology are undoubtedly simplicity and versatility. It enables to obtain for example oxides in the form of layers, powders, monoliths or fibers. These materials can be successfully applied for sensing purposes due to their properties such as transparency, porosity, and high surface areas. In this article, the basis of operation of mainly optical and semiconductor sensors are presented. A brief overview of various kinds of sensors is submitted. The utility of optical fibers and planar waveguides in these systems is discussed. The paper contains also some results obtained by the authors in the field of thin film-based sensors.     

Improved biocompatibility of protein encapsulation in sol–gel materials

By using the fluorescent dye 6-propionyl-2-(N,N-dimethylamino) naphthalene (PRODAN) to monitor methanol generated during tetramethyl orthosilicate polymerization we have optimised the encapsulation of protein in silica sol–gel monoliths with respect to completion of hydrolysis and distillation in order to remove methanol such that protein can be added without denaturation. A minimum of 24 h at +4 °C was found to be required before hydrolysis is complete and 3–5 min of vacuum distillation at 50 °C and 300 mbar needed to remove methanol before the gel is formed. The biocompatibility of a tetramethyl orthosilicate sol–gel monolith was demonstrated by preserving the trimer protein allophycocyanin (APC) in its native form for up to 500 h. This obviates the previously essential requirement of covalently binding the trimer together in order to prevent dissociation into monomers and has enabled observation of native APC trimer in a sol–gel pore for the first time down to the single molecule level using combined fluorescence spectroscopy and confocal microscopy. The higher stability afforded by the protocol we describe could impact on the application of sol–gel materials to single-molecule studies of wider bearing such as protein folding and aggregation.     

Sol–gel synthesis of sodium and lithium based materials

Sodium and lithium cobaltates are important materials for thermoelectric and battery applications due to their large thermoelectric power and ability to (de-) intercalate the alkali metal. For these applications, phase pure materials with controlled microstructure are required. We report on the sol?Cgel synthesis of sodium- and lithium-based materials by using acetate precursors. The produced Na_2/3CoO₂, Li(Ni_1/3Mn_1/3Co_1/3)O₂, and Li(Ni_1/2Co_1/2)O₂ powders are phase pure with grain sizes below 1???m. X-ray diffraction and energy-dispersive spectral analyses show that the cation stoichiometry is preserved in the lithium-based compounds. Despite the low temperatures, the sodium content is reduced by 1/3 as compared to the initial value. Chemical phases of the investigated powders are formed in the sol?Cgel route at temperatures typically 100?C200?K lower than those used in the conventional solid-state synthesis of these materials. The suggested sol?Cgel synthesis is a low temperature process suited for production of phase pure and homogeneous materials with volatile cations.     

Strengthening of composite materials of the fluorohydroxyapatite–zirconia system by titanium nitride

Composite materials of the ZrO₂–fluorohydroxyapatite (FHA)–titanium nitride (TiN) system have been synthesized and studied. In the course of sintering even in a protective inert medium, the reaction between the components begins at 700°C to give calcium titanates, titanium oxides, and oxygen-deficient zirconia compounds. As a result of working through the procedure of synthesis of ultrafine powders and selecting sintering regimes, including the hot-pressing method, dense composite materials of the FHA–ZrO₂ system containing TiN were obtained with a bending strength of up to 273 MPa and a crack resistance of up to 3.3 MPa m^1/2.     

Behavior of cobalt-containing phases in hydrochloride decomposition of sulfide Cu–Ni materials

Effect of the solution redox potential on the behavior of cobalt-containing phase components of sulfide copper-nickel concentrates in the Cu(II)/Fe(III)–Cl––HCl–Cl₂ system was studied. It was shown that, at solution redox potentials in the range 350–650 mV, phases based on heazlewoodite, pentlandite, cobaltous pentlandite, and cobalt pentlandite are transformed to thiospinels from the linneite group (M₃S₄, where M = Ni, Fe, Co). The resulting thiospinels are dissolved, with the exception of Co₃S₄, at solution redox potentials of 450 mV and less. The Co₃S₄ thiospinel is a stable compound in concentrated chloride solutions up to 650 mV, which, in the system under study, may be a reason for the poor cobalt recovery from sulfide concentrates.     

Combinatorial screening of ternary Pt–Ni–Cr catalysts for methanol electro-oxidation

Methanol electro-oxidation activity of ternary Pt–Ni–Cr system was studied by using a combinatorial screening method. A Pt–Ni–Cr thin-film library was prepared by sputtering and quickly characterized by a multichannel multielectrode analyzer. Among the 63 different composition thin-film catalysts, Pt₂₈Ni₃₆Cr₃₆ showed the highest methanol electro-oxidation activity and good stability. This new composition was also studied in its powder form by synthesizing and characterizing Pt₂₈Ni₃₆Cr₃₆/C catalyst. In chronoamperometry testing, the Pt₂₈Ni₃₆Cr₃₆/C catalyst exhibited “decay-free” behavior during 600 s operation by keeping its current density up to 97.1% of its peak current density, while the current densities of Pt/C and Pt₅₀Ru₅₀/C catalysts decreased to 14.0% and 60.3% of their peak current densities, respectively. At 600 s operation, current density of the Pt₂₈Ni₃₆Cr₃₆/C catalyst was 23.8 A g_{noble metal}⁻¹, while that of those of the Pt/C and Pt₅₀Ru₅₀/C catalysts were 2.74 and 18.8 A g_{noble metal}⁻¹, respectively.