Kinetics and mechanism of the oxidation of formic and oxalic acids by quinolinium fluorochromate

Kinetics and mechanism of oxidation of formic and oxalic acids by quinolinium fluorochromate (QFC) have been studied in dimethylsulphoxide. The main product of oxidation is carbon dioxide. The reaction is first-order with respect to QFC. Michaelis-Menten type of kinetics were observed with respect to the reductants. The reaction is acid-catalysed and the acid dependence has the form: k_obs =a +b[H⁺]. The oxidation of α-deuterioformic acid exhibits a substantial primary kinetic isotope effect (k_H/k_D = 6.01 at 303 K). The reaction has been studied in nineteen different organic solvents and the solvent effect has been analysed using Taft’s and Swain’s multiparametric equations. The temperature dependence of the kinetic isotope effect indicates the presence of a symmetrical cyclic transition state in the rate-determining step. Suitable mechanisms have been proposed.     

Kinetics of Ir (III)-catalyzed Oxidation of D-glucose by Potassium Iodate in Aqueous Alkaline Medium

The kinetics of Ir (III) chloride-catalyzed oxidation of D-glucose by iodate in aqueous alkaline medium was investigated at 45°C. The reaction follows first-order kinetics with respect to potassium iodate in its low concentration range but tends to zero order at its higher concentration. Zero-order kinetics with respect to [D-glucose] was observed. In the lower concentration range of Ir (III) chloride, the reaction follows first kinetics, while the order shifts from first to zero at its higher concentration range. The reaction follows first-order kinetics with respect to [OH^?] at its low concentration but tends towards zero order at higher concentration. Variation in [Cl^?] and ionic strength of the medium did not bring about any significant change in the rate of reaction. The first-order rate constant increased with a decrease in the dielectric constant of the medium. The values of rate constants observed at four different temperatures were utilized to calculate the activation parameters. Sodium salt of formic acid and arabinonic acid have been identified as the main oxidation products of the reaction. A plausible mechanism from the results of kinetic studies, reaction stoichiometry, and product analysis has been proposed.     

Kinetics of the Ru(III) catalyzed oxidation of formaldehyde and acetaldehyde by alkaline hexacyanoferrate(III)

The kinetics of ruthenium(III) catalyzed oxidation of formaldehyde and acetaldehyde by alkaline hexacyanoferrate(III) has been studied spectrophotometrically. The rate of oxidation of formaldehyde is directly proportional to [Fe(CN) _3– ⁶ ] while that of acetaldehyde is proportional tok[Fe(CN) _3– ⁶ ]/{k +k[Fe(CN) _3– ⁶ ]}, wherek, k andk are rate constants. The order of reaction in acetylaldehyde is unity while that in formaldehyde falls from 1 to 0. The rate of reaction is proportional to [Ru(III)] _T in each case. A suitable mechanism is proposed and discussed.

---

Die Kinetik der Ru(III)-katalysierten Oxidation von Formaldehyd und Acetaldehyd mittels alkalischem Hexacyanoferrat(III)

Zusammenfassung Die Untersuchung der Kinetik erfolgte spektrophotometrisch. Die Geschwindigkeitskonstante der Oxidation von Formaldehyd ist direkt proportional zu [Fe(CN) _3– ⁶ ], währenddessen die entsprechende Konstante für Acetaldehyd proportional zuk[Fe(CN) _3– ⁶ ]/{k +k[Fe(CN) _3– ⁶ ]} ist, wobeik,k undk Geschwindigkeitskonstanten sind. Die Reaktionsordnung für Acetaldehyd ist eine erste, die für Formaldehyd fällt von erster bis zu nullter Ordnung. Die Geschwindigkeitskonstante ist in jedem Fall proportional zu [Ru(III)] _T . Es wird ein passender Mechanismus vorgeschlagen.

     

Ruthenium(III) catalysed oxidation of l-leucine by a new oxidant,diperiodatoargentate(III) in aqueous alkaline medium

The kinetics of Ru(III) catalysed oxidation of l-leucine by diperiodatoargentate(III) (DPA) in alkaline medium at 298 K and a constant ionic strength of 0.60 mol dm⁻³ was studied spectrophotometrically. The oxidation products are pentanoic acid and Ag(I). The stoichiometry is [l-leucine]:[DPA] = 1:2. The reaction is of first order in Ru(III) and [DPA] and has less than unit order in both [l-leu] and [alkali]. The oxidation reaction in alkaline medium has been shown to proceed via a Ru(III)–l-leucine complex, which further reacts with one molecule of monoperiodatoargentate(III) (MPA) in a rate determining step followed by other fast steps to give the products. The main products were identified by spot test and spectral studies. The reaction constants involved in the different steps of the mechanism are calculated. The catalytic constant (K_c) was also calculated for the Ru(III) catalysed reaction at different temperatures. From the plots of log K_c versus 1/T, values of activation parameters with respect to the catalyst have been evaluated. The activation parameters with respect to the slow step of the mechanism are computed and discussed, and thermodynamic quantities are also determined. The active species of catalyst and oxidant have been identified.     

The oxidation of carbohydrazide by the 12-tungstocobaltate(III) ion in acidic medium: Kinetics and mechanism

The redox reaction between the 12-tungstocobaltate(III) ion and carbohydrazide is first order with respect to both the oxidant and the substrate. The observed pseudo first-order rate constant, k_obs, is retarded by increasing the concentrations of H⁺ and alkali metal ion (Li⁺, Na⁺ and K⁺). There is a linear correlation between the k_obs and the concentrations of carbohydrazide and H⁺ ion, but the plots of k_obs against the concentrations of the alkali metal ions is non-linear. However, the same data is applicable to the Davies equation for the effect of the ionic strength on the k_obs.     

Mechanistic aspects of uncatalyzed and ruthenium(III) catalyzed oxidation of dl-ornithine by copper(III) periodate complex in aqueous alkaline medium: A comparative kinetic study

The oxidation of dl-ornithine monohydrochloride (OMH) by diperiodatocuprate(III) (DPC) has been investigated both in the absence and presence of ruthenium(III) catalyst in aqueous alkaline medium at a constant ionic strength of 0.20 mol dm⁻³ spectrophotometrically. The stiochiometry was same in both the cases, i.e., [OMH]/[DPC] = 1:4. In both the catalyzed and uncatalyzed reactions, the order of the reaction with respect to [DPC] was unity while the order with respect to [OMH] was < 1 over the concentration range studied. The rate increased with an increase in [OH⁻] and decreased with an increase in [IO₄⁻] in both cases. The order with respect to [Ru(III)] was unity. The reaction rates revealed that Ru(III) catalyzed reaction was about eight-fold faster than the uncatalyzed reaction. The oxidation products were identified by spectral analysis. Suitable mechanisms were proposed. The reaction constants involved in the different steps of the reaction mechanisms were calculated for both cases. The catalytic constant (K_C) was also calculated for catalyzed reaction at different temperatures. The activation parameters with respect to slow step of the mechanism and also the thermodynamic quantities were determined. Kinetic experiments suggest that [Cu(H₂IO₆)(H₂O)₂] is the reactive copper(III) species and [Ru(H₂O)₅OH]²⁺ is the reactive Ru(III) species.     

Ruthenium (III) catalysed and uncatalysed oxidation of torsemide by hexacyanoferrate (III) in aqueous alkaline medium: A kinetic comparative approach

The kinetics approach of oxidation of torsemide (TOR) by hexacyanoferrate (III) [HCF (III)] has been identified spectrophotometrically at 420 ​nm in the alkaline medium in the presence and absence of catalyst ruthenium (III) at 25 ​°C, by keeping ionic strength (1 ​× ​10⁻² ​mol ​dm⁻³) constant. The reaction exhibits at the stoichiometry ratio 1:2 of TOR and HCF (III), for uncatalysed and catalysed reactions. In the absence and presence of the catalyst, the order of the reactions obtained for TOR and HCF (III) was unity. However, the rate of the reactions enhanced by the increase in the concentration of catalyst, as well as the rate increases with an increase in alkaline concentration. The activation parameters for the reaction at the slow step were identified, and the effect of temperature on the rate of the reaction was analysed. A suitable mechanism has been demonstrated by considering the obtained results. The derived rate laws are reliable with analysed experimental kinetics.     

Ruthenium(III)-catalyzed oxidation of thallium(i) by 12-tungstocobaltate(III) in hydrochloric acid medium

The reaction between thallium(I) and [Co^IIIW₁₂O₄₀]^5- in the presence of ruthenium(III) as catalyst proceeds viainitial outer-sphere oxidation of the catalyst to ruthenium(VI). The ruthenium(IV) thus generated will oxidize thallium(I) to an unstable thallium(II) which by reacting with oxidant gives the final product, thallium(III). The formation of ruthenium(II) by direct two-electron reduction of the catalyst by thallium(I) is thermodynamically less favorable. The reaction rate is unaffected by the [ H⁺ ], whereas it is catalyzed by chloride ion . The formation of reactive chlorocomplex,TlCl, in a prior equilibrium is the reason for the chloride ion catalysis. Increasing the relative permittivity of the medium increases the rate of the reaction, which is attributed to the formation of an outer-sphere complex between the catalyst and oxidant. This revised version was published online in June 2006 with corrections to the Cover Date.     

Mn(III)-catalyzed oxidation of sulfides to sulfoxides with hydrogen peroxide

Sulfides were selectively oxidized to the corresponding sulfoxides in good yields with hydrogen peroxide using a manganese(III) Schiff-base complex as a catalyst in glacial acetic acid as solvent under mild conditions.     

A kinetic and mechanistic study on the silver (I)-catalyzed oxidation of l-alanine by cerium (IV) in sulfuric acid medium

The kinetics and mechanism of Ag(I)-catalyzed oxidation of l-alanine by cerium (IV) in sulfuric acid media have been investigated by titrimetric technique of redox in the temperature range of 298–313 K. It is found that the reaction is of first order with respect to Ce(IV) and l-alanine, and it is of a positive fractional order with respect to Ag(I). It is found that the pseudo first order ([l-alanine] ? [Ce(IV)] ? [Ag(I)]) rate constant k′ increases with the increase of[H⁺]. The major oxidation product of alanine has been identified as acetaldehyde by an ¹H NMR and IR spectroscopy. Under the experimental conditions, the kinetically active species has been found to be Ce⁴⁺. Under nitrogen atmosphere, the reaction system can initiate the polymerization of acrylonitrile, indicating generation of free radicals. On the basis of the experimental results, a suitable mechanism has been proposed. The rate constants of the rate-determining step together with the activation parameters were evaluated.     

Kinetics and mechanism of the ruthernium(III) catalyzed oxidation of propane-1,3-diol by alkaline hexacyanoferrate(III)

The kinetics of oxidation of propane-1,3-diol by alkaline hexacyanoferrate (III) catalyzed by ruthenium trichloride has been studied spectrophotometrically. A reaction mechanism involving the formation of an intermediate complex between the substrate and the catalyst is proposed. In the rate-determining step this complex is attacked by hexacyanoferate(III) forming a free radical which is further oxidized.     

Oxidation of ketones by cerium(IV) in presence of iridium(III) chloride

Kinetic data, in iridium(III) chloride catalyzed oxidation of ethyl methyl ketone (EMK) and methyl propyl ketone (MPK) by cerium(IV) perchlorate in aqueous perchloric acid medium, suggest the formation of complex C₁ between cerium(IV) and organic substrate in the first equilibrium step, which in turn gives rise to another complex C₂ with the catalyst. This second complex in the rate-determining step gives rise to the intermediate products. Interestingly IrCl_3, which is considered to be a sluggish catalyst in alkaline media, was found to surpass the catalytic efficiency of even osmium and ruthenium in acidic media. Rate decreases in the beginning at low acid concentrations, but after reaching to a minimum it becomes directly proportional to acid concentrations. Probably on increasing the acid concentrations hydrolyzed species of ceric perchlorate gradually converts into the un-hydrolyzed species, which then accelerates the rate at higher [H⁺], resulting in the observed peculiar effect of hydrogen ions on the rate. Initial concentrations of cerium(IV) and acid determine the extent of reduction of cerium(IV) by water. Order of the reaction shows direct proportionality with respect to the oxidant and ketones at their low concentrations, but tends to become zeroth order at their higher concentrations. Rate of the reaction shows direct proportionality with respect to [IrCl₃] while change in ionic strength of the medium does not affect the reaction velocity. Parameters such as the energy of activation, free energy of activation and entropy data suggest that methyl propyl ketone forms the activated complex more easily compared to ethyl methyl ketone.     

Kinetics of ruthenium(III)-catalyzed oxidation of arylthioacetic acids by Ce(IV)

The kinetics of ruthenium(III)-catalyzed oxidation of several arylthioacetic acids by Ce(IV) have been studied. The proposed mechanism involves the formation of a 1∶1 complex between Ru(III) and arylthioacetic acid, which then reacts with Ce(IV).     

The HNO donor ability of hydroxamic acids upon oxidation with cyanoferrates(III)

The hydroxamic acids (RC(O)NHOH, HA) exhibit diverse biological activity, including hypotensive properties associated with formation of nitroxyl (HNO) or nitric oxide (NO). Oxidation of two HAs, benzohydroxamic and acetohydroxamic acids (BHA, AHA) by [Fe(CN)₅NH₃]^2? or [Fe(CN)₆]^3? was analyzed by spectroscopic, mass spectrometric techniques, and flow EPR measurements. Mixing BHA with both Fe(III) reactants at pH 11 allowed detecting the hydroxamate radical, (C₆H₅)C(O)NO˙^?, as a one-electron oxidation product, as well as N₂O as a final product. Successive UV–vis spectra of mixtures containing [Fe(CN)₅NH₃]^2? (though not [Fe(CN)₆]^3?) at pH 11 and 7 revealed an intermediate acylnitroso-complex, [Fe(CN)₅NOC(O)(C₆H₅)]^3? (λ_max, 465 nm, very stable at pH 7), formed through ligand interchange in the initially formed reduction product, [Fe(CN)₅NH₃]^3?, and characterized by FTIR spectra through the stretching vibrations ν_(CN), ν_(CO), and ν_(NO). Free acylnitroso derivatives, formed by alternative reaction paths of the hydroxamate radicals, hydrolyze forming RC(O)OH and HNO, postulated as precursor of N₂O. Minor quantities of NO are formed only with an excess of oxidant. The intermediacy of HNO was confirmed through its identification as [Fe(CN)₅(HNO)]^3? (λ_max, 445 nm) as a result of hydrolysis of [Fe(CN)₅(NOC(O)(C₆H₅)]^3? at pH 11. The results demonstrate that hydroxamic acids behave predominantly as HNO donors.     

Cyclometalated Ir(III) complexes-catalyzed aerobic hydroxylation of arylboronic acids induced by visible-light

The cyclometalated Ir(III) complexes-catalyzed aerobic hydroxylation of arylboronic acids under visible-light has been successfully developed. This catalytic system has a broad substrate scope, affording a series of phenols smoothly with the highest isolated yield up to 95%. Moreover, this protocol is capable to synthesize several useful phenols containing bulky moieties, which are potential candidates or intermediates used as pharmaceuticals and functional materials. The Ir(III)-catalyzed hydroxylation of arylboronic acids could be applied in a one-pot synthesis of several important phenol derivatives, including 1,1′-methylene-bis(2-naphthol), 2,3-dihydro-1H-naphtho[2,1-e][1,3]oxazine and a bioactive compound LUF5771.     

Oxidative degradation and deamination of atenolol by diperiodatocuprate(III) in aqueous alkaline medium: A mechanistic study

The kinetics of oxidation of atenolol (ATN) by diperiodatocuprate(III) (DPC) in aqueous alkaline medium at a constant ionic strength of 0.10 mol dm⁻³ was studied spectrophotometrically. The reaction between DPC and ATN in alkaline medium exhibits 1:2 stoichiometry (ATN:DPC). The reaction is of first order in [DPC] and has less than unit order in both [ATN] and [alkali]. However, the order in [ATN] and [alkali] changes from first order to zero order as their concentration increase. Intervention of free radicals was observed in the reaction. Increase in periodate concentration decreases the rate. The oxidation reaction in alkaline medium has been shown to proceed via a monoperiodatocuprate(III)–ATN complex, which decomposes slowly in a rate-determining step followed by other fast steps to give the products. The main oxidative products were identified by spot test, IR, NMR and LC–ESI-MS studies. The reaction constants involved in the different steps of the mechanism are calculated. The activation parameters with respect to slow step of the mechanism are computed and discussed, and thermodynamic quantities are also determined.     

二(氢过碘酸)合银(III)配离子氧化愈创甘油醚的反应动力学及机理

在碱性介质中,用传统的分光光度法研究了Ag(III)配离子,即[Ag(HIO6)2]5-,氧化药物分子愈创甘油醚的动力学及其机理.用质谱鉴定了氧化产物;反应对Ag(III)和愈创甘油醚均为一级;在温度25.0-40.0℃范围内,通过分析[OH-]和[IO4-]tot对反应速率的影响,二级速率常数有以下表达式:k′=(ka kb[OH-])K1/｛f([OH-])[IO4-]tot K1｝,在25.0℃及离子强度0.30mol·L-1时,对此反应有ka=(2.6±1.2)×10-2mol-1·L·s-1,kb=(2.8±0.1)mol-2·L2·s-1,及K1=(4.1±0.4)×10-4mol·L-1,求出了涉及ka,kb的活化参数,并据此推出反应机理为反应体系中的[Ag(HIO6)2]5-配离子在前期平衡后,反应活性中心与药物分子形成Ag(III)-过碘酸-愈创甘油醚分子三元配合物,配位甘油醚分子通过两个平行途径将两电子传递给中心原子Ag:一个途径无OH-离子参与,另一途径有OH-参与完成.     

Liquid Phase and Microwave Assisted Oxidation of Some Hydrocarbons,Aromatic Aldehydes,and Phenols by Cerium(IV) Catalyzed by Iridium(III) in Acidic Medium

Addition of traces of iridium(III) chloride with cerium(IV) sulphate (catalyst–substrate ratio 1:75757 to 1:151515) in traditional water-bath heating resulted in the oxidation of propyl benzene, naphthalene, dimethoxy benzaldehyde, trimethoxy benzaldehydes, cresol, and quinol dissolved in acetic acid to give 70, 33, 96, 74, 49, and 66% yields respectively of the products, while phenol and resorcinol polymerized. Reactants adsorbed on alumina under solventless conditions in a microwave oven resulted in the decrease in yield. Oxidation of both hydroxyl groups takes place in quinol, whereas it was selective at the α-carbon in the side chain and at the methyl group in the case of propyl benzene and cresol, respectively. Conditions were tested for the highest yields under the experimental conditions.