Synthesis,spectroscopic, magnetic and thermal properties of bimetallic salts, [Ni(L)][MCl4] {where M = Co(II), Zn(II), Hg(II) and L = 3,7-bis(2-aminoethyl)-1,3,5,7-tetraazabicyclo(3.3.1)nonane}. X-ray structure of [Ni(L)][CoCl4]

New bimetallic complex salts corresponding to the formulation [Ni(L)][MCl₄] have been synthesized by the facile reaction between [Ni(L)](ClO₄)₂ and [MCl₂(PPh₃)₂] in high yields {where M = Co(II), Zn(II), Hg(II) and L = 3,7-bis(2-aminoethyl)-1,3,5,7-tetraazabicyclo(3.3.1)nonane}. The complexes were characterized by IR, electronic spectra, TGA/DSC, magnetic moment and conductivity measurements. The X-ray crystal structure for [Ni(L)][CoCl₄] clearly establishes the cationic–anionic interaction. It crystallizes in the space group P1 with unit cell dimensions a = 7.1740(15) Å, b = 8.1583(16) Å and c = 8.3102(16) Å. A square-planar geometry is evident for the [Ni(L)]²⁺ cation while the anion is found to be tetrahedral. A two-step thermolytic pattern is observed in the pyrolysis of the bimetallic complex salts.     

The electrochemical properties of thermophilic cytochrome P450 CYP119A2 at extremely high temperatures in poly(ethylene oxide)

The electrochemical measurements were carried out by using thermophilic cytochrome P450 CYP119A2 (P450st) modified with poly(ethylene oxide) (PEO) in PEO₂₀₀ as an electrochemical solvent. The PEO modified P450st gave clear reduction–oxidation peaks by cyclic voltammetry in oxygen-free PEO₂₀₀ up to 120 °C. The midpoint potential measured for the P450st was −120 mV vs. [Fe(CN)₆]⁴⁻/[Fe(CN)₆]³⁻ at 120 °C. The peak separation, ΔE, was 16 mV at 100 mV/s. The estimated electron transfer rate of PEO-P450st at 120 °C was 35.1 s⁻¹. The faster electron transfer reaction was achieved at higher temperatures. The electrochemical reduction of dioxygen was observed at 115 °C with the PEO-modified P450st system.     

Esterification of (RS)-Ibuprofen by native and commercial lipases in a two-phase system containing ionic liquids

Four commercially available lipases and two native lipases from Aspergillus niger AC-54 and Aspergillus terreus AC-430 were used for the resolution of (RS)-Ibuprofen in systems containing the ionic liquids [BMIM][PF₆] and [BMIM][BF₄]. The lipases showed higher conversion in a two-phase system using [BMIM][PF₆] and isooctane compared to that in pure isooctane. Although the best enzyme was a commercially available lipase from Candida rugosa (E = 8.5), another native lipase, produced in our laboratory, from A. niger gave better enantioselectivity (E = 4.6) than the other lipases tested (E = 1.9–3.3.). After thorough optimization of several reaction conditions (type and ratios of isooctane/ionic liquid, amount of enzyme, and reaction time), the E-value of A. niger lipase (15% w/v) could be duplicated (E = 9.2) in a solvent system composed of [BMIM][PF₆] and isooctane (1:1) after 96 h of reaction.     

A ruthenium(II) complex with the propionate ion: Synthesis,characterization and cytotoxic activity

The complex [Ru(η²-O₂CCH₂CH₃)(dppe)₂]PF₆ (dppe = 1,2-bis(diphenylphosphino)ethane) was prepared and characterized by elemental analysis, spectroscopic techniques, X-ray crystallography, HRESIMS and HRESIMS/MS. The characterization data are consistent with a cis arrangement for the dppe ligands and a bidentate coordination of the propionate ligand through carboxylate oxygens. Cytotoxicity assays were carried out on human and murine cancer and normal cell lines. In general, the [Ru(η²-O₂CCH₂CH₃)(dppe)₂]PF₆ complex was more cytotoxic than both its precursor cis–[RuCl₂(dppe)₂] and the reference metallodrug cisplatin. The best results against the HepG2 human tumour cell line and S180 murine tumour cell line were found with IC₅₀ values of 6.5 ± 0.2 and 0.18 ± 0.03 μM, respectively.     

Prospects for a widely applicable reference potential scale in ionic liquids based on ideal reversible reduction of the cobaltocenium cation

Oxidation of ferrocene, Fe(cp)₂ or reduction of the cobaltocenium cation, [Co(cp)₂]⁺ represent reversible processes that are widely used to provide a voltammetric potential reference scale. However, the [Fe(cp)₂]^0/+ process has been reported to exhibit complexities which may restrict its usefulness for this purpose in ionic liquids. In this study, the reduction of [Co(cp)₂]⁺ in the ionic liquids, [bmpyr][Ntf₂], [emim][Ntf₂], and [bmim][PF₆] (bmpyr = 1-butyl-1-methylpyrrolidinium, emim = 1-ethyl-3-methylimidazolium, bmim = 1-butyl-3-methylimidazolium, Ntf₂ = bis(trifluoromethanesulfonyl)amide) is reported at macro, micro, and rotating disk electrodes. Reversible behaviour, after allowance for ohmic drop, and linear current–concentration relationships are attained over wide concentration ranges for all electrode configurations. Results support the use of the [Co(cp)₂]^+/0 process for reference potential purposes, with non-idealities of the kind reported for ferrocene not being detected.     

Synthesis and characterization of thiosemicarbazone derivatives of 2-chloro-4-hydroxy-benzaldehyde and their rhenium(I) complexes

N-Thioamide thiosemicarbazone derived of 2-chloro-4-hydroxy-benzaldehyde (R = H, HL¹; R = Me, HL² and R = Ph, HL³) have been prepared and their reaction with fac-[ReX(CO)₃(CH₃CN)₂] (X = Br, Cl) in chloroform gave the adducts [ReX(CO)₃(HL)] (1a X = Cl, R = H; 1a′ X = Br, R = H; 1b X = Cl, R = CH₃; 1b′ X = Br, R = CH₃; 1c X = Cl, R = Ph; 1c′ X = Br, R = Ph) in good yield. Complexes 1a′ and 1b’ were also obtained by the reaction of HL¹ and HL³ with [ReBr(CO)₅] in toluene.All the compounds have been characterized by elemental analysis, mass spectrometry (FAB), IR and ¹H NMR spectroscopic methods. Moreover, the structures of HL², HL³ and 1a·H₂O were also established by X-ray diffraction. In 1a, the rhenium atom is coordinated by the sulphur and the azomethine nitrogen atoms, forming a five-membered chelate ring, as well as three carbonyl carbon and chloride atoms. The resulting coordination polyhedron can be described as a distorted octahedron.The study of the crystals obtained by slow evaporation of methanol and DMSO solutions of the adducts 1a′ and 1b, respectively, showed the formation of dimer structures based on rhenium(I) thiosemicarbazonates [Re₂(L¹)₂(CO)₆]·3H₂O (2a)·3H₂O and [Re₂(L²)₂(CO)₆]·(CH₃)₂SO (2b)·2(CH₃)₂SO. Amounts of these thiosemicarbazonate complexes [Re₂(L)₂(CO)₆] (2) were obtained by reaction of the corresponding free ligands with [ReCl(CO)₅] in dry toluene.In 2a·3H₂O and 2b·2(CH₃)₂SO the dimer structures are established by Re–S–Re bridges, where S is the thiolate sulphur from a N,S-bidentate thiosemicarbazonate ligand. In both structures the rhenium coordination sphere is similar; the dimers are in the same diamond Re₂S₂ face.     

Kinetic spectrophotometric method for trace determination of thiocyanate based on its inhibitory effect

A kinetic spectrophotometric method for the determination of thiocyanate, based on its inhibitory effect on silver(I) catalyzed substitution of cyanide ion, by phenylhydrazine in hexacyanoferrate(II) is described. Thiocyanate ions form strong complexes with silver(I) catalyst which is used as the basis for its determination at trace level. The progress of reaction was monitored, spectrophotometrically, at 488 nm (λ_max of [Fe(CN)₅PhNHNH₂]^3?, complex) under the optimum reaction conditions at: 2.5 × 10^?3 M [Fe(CN)₆]^4?, 1.0 × 10^?3 M [PhNHNH₂], 8.0 × 10^?7 M [Ag⁺], pH 2.8 ± 0.02, ionic strength (μ) 0.02 M (KNO₃) and temperature 30 ± 0.1 °C. A linear relationship obtained between absorbance (measured at 488 nm at different times) and inhibitor concentration, under specified conditions, has been used for the determination of [thiocyanate] in the range of 0.8–8.0 × 10^?8 M with a detection limit of 2 × 10^?9 M. The standard deviation and percentage error have been calculated and reported with each datum. A most plausible mechanistic scheme has been proposed for the reaction. The values of equilibrium constants for complex formation between catalyst–inhibitor (K_CI), catalyst–substrate (K_s) and Michaelis–Menten constant (K_m) have been computed from the kinetic data. The influence of possible interference by major cations and anions on the determination of thiocyanate and their limits has been investigated.     

A comparative study for treatment of white liquor by different applications of Fenton process

In this paper, the treatability of white liquor by conventional (CFP), modified (MFP) and electro-Fenton oxidation processes (EFP) was investigated depending on the COD parameter. Based on the experimental results, up to 62.4%, 58.4% and 54.9% COD removals by the CFP, MFP and EFP were achieved, respectively. It was observed that adjustment of initial pH to acidic values is not required in the CFP. The optimal operational conditions were found to be [Fe²⁺] = 500 mg/L, [H₂O₂] = 1000 mg/L at pH 7.3 (original pH) in the CFP, [Fe⁰] = 1250 mg/L, [H₂O₂] = 1000 mg/L at pH 3 in the MFP, and I = 1.0 A, [H₂O₂] = 1500 mg/L at pH 3 in the EFP, respectively. As a result, the CFP has been determined as a more efficient alternative treatment method.     

Re-investigation of ortho-metalated N,N-dialkylbenzylamine complexes of rare-earth metals. First structurally characterized arylates of neodymium and gadolinium Li[LnAr4]

The influence of the ether ligand in [LnCl₃(solv)_n], solv = THF, DME; n = 1–3 in reactions with ortho-lithiated dimethyl-benzylamine Li(dmba) has been studied. An improved protocol towards homoleptic tris-aryl complexes of the type [Ln(dmba)₃], Ln = Y, Er and Yb has been developed and molecular structures of these complexes have been established by X-ray crystallography. For the first time stable homoleptic lithium ate-complexes of the type Li[Ln(dmba)₄] (Ln = Gd, Nd) have been isolated and structurally characterized. The success in their synthesis strongly depends on the choice of the appropriate [LnCl₃(solv)_n] precursor, such as [GdCl₃(dme)₂], [NdCl₃(dme)], and THF-free reaction conditions. Factors influencing on possible degradation pathways of lanthanide tris-aryl complexes with dmba-type ligands are discussed.     

Spin crossover FeII complexes as templates for bimetallic oxalate-based 3D magnets

We present the synthesis and structural characterization of the salt [Fe(bpp)₂][MnCr(ox)₃]₂ · bpp · CH₃OH. It crystallizes in the monoclinic space group. This material contains an anionic [MnCr(ox)₃]⁻ 3D 10-gon ferromagnetic network, that orders below 3.0 K. The channels created by this architecture are filled by the spin crossover cations [Fe(bpp)₂]²⁺ (bpp = 2,6(bispyrazol-3-yl)pyridine), free ligand and solvent molecules. No spin transition has been observed at ambient pressure.     

Nanocomposite of a chromium Prussian blue with TiO2. Redox reactions and the synthesis of Prussian blue molecule-based magnets

The reaction of [NEt₄]₃[Cr(CN)₆] with titanium(III) p-toluenesulfonate at a pH of 2 affords a gray solid whose metal content and spectroscopic and magnetic properties are fully consistent with it being a Prussian blue material of stoichiometry “Ti^III[Cr^III(CN)₆] · H₂O”. The carbon, nitrogen, and hydrogen content, however, are not consistent with this stoichiometry, and further investigation showed that the gray material has a powder X-ray diffraction profile, infrared spectrum, and magnetic properties very similar to those of the “all-chromium” Prussian blue Cr^II[Cr^III(CN)₆]_0.67 · 6H₂O. All data, including the C, H, and N weight percentages, are consistent with the conclusion that the material isolated is a nanocomposite of Cr^II[Cr^III(CN)₆]_0.67 · xH₂O and TiO₂ in the ratio of 1–1.6. These results suggest that Ti^III reduces some of the [Cr^III(CN)₆]³⁻ ions to generate Ti^IV and Cr^II; the former hydrolyzes to amorphous TiO₂ · 2H₂O, the latter loses its bound CN ligands and reacts with unreacted [Cr^III(CN)₆]³⁻ ions to generate the crystalline all-chromium PB species. The electrochemical potentials suggest that the [Cr^III(CN)₆]³⁻ ion should not be reduced by Ti^III; evidently, this unfavorable reaction is driven by the insolubility of the reaction products. The results constitute a cautionary tale in two respects: first, that the characterization of Prussian blue materials must be conducted with care and, second, that the insolubility of Prussian blue analogues can sometimes drive reactions that in solution are thermodynamically unfavorable.     

Expedient one-pot organometallics-free synthesis of tris(2-pyridyl)phosphine from 2-bromopyridine and elemental phosphorus

2-Bromopyridine reacts with elemental phosphorus (red or white) in a superbasic KOH/DMSO(H₂O) suspension at 100 °C (for red phosphorus) and 75 °C (for white phosphorus) over 3 h to afford tris(2-pyridyl)phosphine in a 62% yield (from red phosphorus) and a 50% yield (from white phosphorus). Under microwave assistance, the reaction with red phosphorus takes just 20 min to produce tris(2-pyridyl)phosphine in 53% yield. A hitherto unknown complex, [Pd(PPy₃)₂Cl₂]·CH₂Cl₂, synthesized from tris(2-pyridyl)phosphine and PdCl₂, has the cis-configuration; this is unusual for bis(phosphino)palladium dichloride complexes.     

New thioether–dithiolate complexes of Cp1Ir and some reactivity features

The reaction of [Cp1IrCl₂]₂ (Cp* = η⁵ ? C₅Me₅) with the tridentate 3-thiapentane-1,5-dithiolate ligand, S(CH₂CH₂S^?)₂ (tpdt), led to the formation of [Cp1Ir(η³ ? tpdt)] (1) in 81% isolated yield. Subsequent reactions of 1 with [Cp1IrCl₂]₂ in 2:1 and 1:1 molar equiv ratios resulted in the formation of [Cp1Ir(μ ? η²:η³ ? tpdt)Cp1IrCl][PF₆] (2) and [Cp1Irμ ? η²:η³ ? tpdt)Cp1IrCl][Cp1IrCl₃] (3) in 86 and 79% yields, respectively, based on 1, whereas the reactions of 1 with [(COD)IrCl]₂ (COD = 1,5-cyclooctadiene) in 2:1 and 1:1 molar equiv ratios resulted in the formation of the homo-bimetallic derivatives Cp1Ir(μ ? η¹:η³ ? tpdt)(COD)IrCl (4) (92% yield) and [Cp1Ir(μ ? η²:η³ ? tpdt)(COD)Ir] [(COD)IrCl₂] (5) (82% yield). Reactions between 1 and [(COD)RhCl]₂, yielded the hetero-bimetallic derivatives Cp1Ir(μ ? η¹:η³ ? tpdt)(COD)RhCl (6) and [Cp1Ir(μ ? η²:η³ ? tpdt)(COD)Rh][(COD)RhCl₂] (7), in 92 and 93% yields, respectively. The reaction of 1 with methyl iodide gave mono-methylated derivative [Cp1Ir(η³-C₄H₈S₃Me)]I (8) (93% yield). All these compounds have been comprehensively characterized.     

New derivatives of an enneanuclear Mn SMM

The reaction of the neutral triangular species [Mn₃O(O₂CR)₆L₃] (R = Me, Ph, CMe₃; L = py) with the tripodal ligands H₃tmp (1, 1, 1-tris(hydroxymethyl)propane) and H₄peol (pentaerythritol) affords the enneanuclear complexes [Mn₉O₇(O₂CMe)₁₁(tmp)(py)₃(H₂O)₂] (2); [Mn₉O₇(O₂CMe)₁₁(Hpeol)(py)₃(H₂O)₂] (3); [Mn₉O₇(O₂CCMe₃)₁₁(Hpeol)(py)₃(H₂O)₂] (4); and [Mn₉O₇(O₂CPh)₁₁(Hpeol)(py)₃(H₂O)₂] (5). Complexes 2–5 are characterized by spin ground states of S = 17/2 with axial zero-field splitting parameters in the range D = −0.26–0.30 cm⁻¹. Sweep-rate and temperature dependent hysteresis loops diagnostic of SMM behaviour are observed below 1.2 K featuring steps at regular intervals of field.     

Heptanuclear high-spin complex compounds based on S-donors

The precursors [Fe(III)(^SYL)Cl] (^SYLH₂) = N,N′-bis(1-hydroxy-Y-2-benzyliden)-1,6-diamino-3-thiohexane, (Y = H, 3EtO, 5Me) are high-spin (S = 5/2) complexes. The precursors are combined with [Fe(II)(CN)₆]⁴⁻ and [Co(III)(CN)₆]³⁻ to yield star-shaped heptanuclear clusters, [Fe(II)(CN–Fe(III)^SYL)₆]Cl₂ and [Co(III)(CN–Fe(III)^SYL)₆]Cl₃. The star-shaped compounds are high-spin (HS) systems at room temperature. On cooling to 20 K some of the iron(III) centers perform some HS–HS transition.     

Supramolecular chemistry and the control of the crystallization behavior by the choice of the counter-ion. Part 11. The stereochemistry and crystallization architecture of [(tren)Co(NO2)2]A (I), [(tren)Co(ox)]A (II), [(en)2Co(ox)]A (III) and [trans-(pn)2Co(NO2)2]A (IV), with A = [trans-(NH3)2Co(NO2)4]

In continuation of studies carried out previously [I. Bernal, Inorg. Chim. Acta 96 (1985) 99; I. Bernal, Inorg. Chim. Acta (1986) 121; I. Bernal, E.O. Schlemper, C.K. Fair, Inorg. Chim. Acta 115 (1986) 25; I. Bernal, Inorg. Chim. Acta 101 (1985) 175; I. Bernal, J. Cetrullo, J. Coord. Chem. 20 (1989) 237], we have now expanded the nature and number of cations associated with the [trans-(NH₃)₂Co(NO₂)₄] anion in order to better document when, and how, this helical propeller species crystallizes as a conglomerate.[(tren)Co(NO₂)₂][trans-(NH₃)₂Co(NO₂)₄] (I) crystallizes as a racemate in space group P2₁/n with cell constants of a = 15.8900(2), b = 19.7800(3), c = 26.6200(4) Å, β = 101.970(3)°, z = 15.[(tren)Co(ox)][trans-(NH₃)₂Co(NO₂)₄] (II) crystallizes as a racemate in space group I2/a with cell constants of a = 21.592(11), b = 7.050(4), c = 26.46(2) Å, β = 93.09(6)°, z = 8.[(en)₂Co(ox)][trans-(NH₃)₂Co(NO₂)₄] (III) crystallizes as a racemate in space group P2₁/n with cell constants of a = 6.4740(1), b = 22.8950(6), c = 13.1660(3) Å, β = 97.3310(10)°, z = 4.[trans-(pn)₂Co(NO₂)₂][trans-(NH₃)₂Co(NO₂)₄] (IV) also crystallizes as a racemate in space group P(¯1; no. 2) with cell constants of a = 6.508(2), b = 8.829(5), c = 9.851(5) Å, α = 72.84(2), β = 80.15(3), and γ = 81.45(6)°, z = 1.The most notable results are as follows: (1) all four compounds studied are racemates unlike the previously studied [cis-Co(en)₂(NO₂)₂][trans-(NH₃)₂Co(NO₂)₄] [I. Bernal, Inorg Chim Acta 101 (1985) 175] (V) and K[trans-(NH₃)₂Co(NO₂)₄] (VI) that crystallize as conglomerates. Nevertheless, they share certain crystalline features, which are readily observed in their packing diagrams.In all the four cases the new data were collected at 295 K and 120 K, using Mo Kα radiation; the former with a Nonius CAD-4 diffractometer and the latter with a Nonius CCD instrument. Of primary interest to us are the changes in packing caused by repeated changes in the charge compensating cations. Comparisons with the packing observed previously in [cis-Co(en)₂(NO₂)₂][trans-(NH₃)₂Co(NO₂)₄] (V) and K[trans-(NH₃)₂Co(NO₂)₄] (VI) are made since, at the time of publications of those early papers, no detailed study of the packing characteristics of these anions was published and the existing graphic software were primitive compared with the current packages. This oversight is remedied below.     

Magnetic properties and exchange couplings of one-dimensionally arrayed 4f−3d heterometallic [Ln2Cu2]n compounds

Heterometallic polymeric coordination compounds [{Ln(hfac)₂(CH₃OH)}₂{Cu(dmg)(Hdmg)}₂]_n ([Ln₂Cu₂]_n; Ln = Tb, Ho, and Er; H₂dmg = dimethylglyoxime; Hhfac = 1,1,1,5,5,5-hexafluoropentane-2,4-dione) were synthesized, and the X-ray crystallographic analysis shows that their structures are isomorphous to those of the known ferrimagnetic [Gd₂Cu₂]_n and [Dy₂Cu₂]_n analogs. The exchange couplings in [Tb₂Cu₂]_n, [Ho₂Cu₂]_n, and [Er₂Cu₂]_n were precisely evaluated by high-frequency EPR and pulsed-field magnetization studies, giving J_Tb?Cu/k_B = ?0.77(2) K, J_Ho?Cu/k_B = ?0.250(12) K and J_Er?Cu/k_B = ?0.149(15) K. They were comparable to those of the Gd and Dy analogs. The absolute value of the exchange coupling parameter monotonically decreases in the order of Gd, Tb, Dy, Ho, and Er.     

Synthesis,structure and magnetic properties of 2-D and 3-D [cation]{M[Au(CN)2]3} (M = Ni, Co) coordination polymers

In order to study the templating effect of the cation and the resulting impact on the magnetic properties, reactions of M(II) salts with [cation][Au(CN)₂] were conducted, yielding a series of coordination polymers of the form [cation]{M[Au(CN)₂]₃} (cation = ⁿBu₄N⁺, PPN⁺ (bis(triphenylphosphoranylidene)ammonium); M = Ni(II) and Co(II)). The structures of ⁿBu₄N{M[Au(CN)₂]₃} and PPN{M[Au(CN)₂]₃} (M = Ni and Co) contain two distinct 3-D anionic frameworks of {M[Au(CN)₂]₃}⁻, hence the framework was sensitive to the cation, but not to the identity of the metal center. In ⁿBu₄N{M[Au(CN)₂]₃}, the metal centers are connected by [Au(CN)₂] units to form six 2-D (4, 4) rectangular grids that are fused through the M centers to yield a complex three-dimensional framework which accommodates the ⁿBu₄N⁺ cations. In PPN{M[Au(CN)₂]₃}, the framework adopts a simpler non-interpenetrated Prussian-blue-type pseudo-cubic array, with the PPN⁺ cations occupying each cavity; no reduction in dimensionality occurs despite the large cation size. In the presence of water, {Co(H₂O)₂[Au(CN)₂]₂} · ⁿBu₄N[Au(CN)₂] was obtained, a 2-D layered polymer that contains neutral sheets of {Co(H₂O)₂[Au(CN)₂]₂} which are separated by ⁿBu₄N[Au(CN)₂] layers; aurophilic interactions of 3.4250(13) Å and hydrogen-bonding connect the layers. The magnetic properties of all compounds were investigated by SQUID magnetometry. The Ni(II) polymers have similar magnetic behaviour, which are dominated by zero-field splitting with very weak antiferromagnetic interactions at low temperature (D ∼ 2–3 cm⁻¹, zJ < 1 cm⁻¹). The magnetic behaviour of all of the Co(II) polymers were found to be very similar, and dominated by single-ion effects (i.e. a large first-order orbital contribution). No significant magnetic coupling is observed in any of these coordination polymers, suggesting that the [Au(CN)₂] bridging unit behaves as a poor mediator of magnetic exchange in these high-dimensionality systems.     

New thioether–dithiolate complexes of Cp1Ir and some reactivity features

The reaction of [Cp1IrCl₂]₂ (Cp* = η⁵ − C₅Me₅) with the tridentate 3-thiapentane-1,5-dithiolate ligand, S(CH₂CH₂S⁻)₂ (tpdt), led to the formation of [Cp1Ir(η³ − tpdt)] (1) in 81% isolated yield. Subsequent reactions of 1 with [Cp1IrCl₂]₂ in 2:1 and 1:1 molar equiv ratios resulted in the formation of [Cp1Ir(μ − η²:η³ − tpdt)Cp1IrCl][PF₆] (2) and [Cp1Irμ − η²:η³ − tpdt)Cp1IrCl][Cp1IrCl₃] (3) in 86 and 79% yields, respectively, based on 1, whereas the reactions of 1 with [(COD)IrCl]₂ (COD = 1,5-cyclooctadiene) in 2:1 and 1:1 molar equiv ratios resulted in the formation of the homo-bimetallic derivatives Cp1Ir(μ − η¹:η³ − tpdt)(COD)IrCl (4) (92% yield) and [Cp1Ir(μ − η²:η³ − tpdt)(COD)Ir] [(COD)IrCl₂] (5) (82% yield). Reactions between 1 and [(COD)RhCl]₂, yielded the hetero-bimetallic derivatives Cp1Ir(μ − η¹:η³ − tpdt)(COD)RhCl (6) and [Cp1Ir(μ − η²:η³ − tpdt)(COD)Rh][(COD)RhCl₂] (7), in 92 and 93% yields, respectively. The reaction of 1 with methyl iodide gave mono-methylated derivative [Cp1Ir(η³-C₄H₈S₃Me)]I (8) (93% yield). All these compounds have been comprehensively characterized.     

A theoretical study on the molecular structure and vibrational (FT-IR and Raman) spectra of a new organic–inorganic compound of 2[N(C3H7)4]SbCl4

The salt bis-tetrapropylammonium tetrachloroantimonate (III) is crystallized in the monoclinic system with the P2₁/c space group. The unit cell dimensions are: a = 18.1973(5) Å, b = 15.7225(4) Å, c = 13.6491(3) Å, β = 91.65(1)° and Z = 4. The vibrational spectra have been measured at room temperature by FT-infrared spectroscopy (4000–400 cm⁻¹) on polycrystalline samples, and by FT-Raman spectroscopy (3500–30 cm⁻¹) on monocrystals. The structure of the 2[N(C₃H₇)₄]SbCl₄ formed by two types of cations (C₃H₇)₄N⁺ and two types of anions [SbCl₄]⁻ was optimized by density functional theory (DFT) using the B3LYP method. Actually the values obtained by the B3LYP/LanL2MB basis with the aid of a calculation of the potential energy distribution (PED) are in good agreement with the experimental data. A root mean square (rms) difference value was calculated and the small differences between experimental and calculated modes have been interpreted by intermolecular interactions with-in the crystal. A comparison between the results of the 2[N(C₃H₇)₄]SbCl₄ compound and the simulated compounds based on the (CH₃)₄N⁺) and (C₂H₅)₄N⁺ fragments, shows an increase in the wavenumber of the bands assigned to the stretching vibration of the (NC) group for the 2[N(C₃H₇)₄]SbCl₄ compound. The comparison between the [N(C₃H₇)₄]Cl ligand and the 2[N(C₃H₇)₄]SbCl₄ compound of the infrared and Raman spectrum shows an increase in the wavenumber for the bands assigned to the stretching vibration of (CH₃) and the bending vibration of (NC₄) groups in the 2[N(C₃H₇)₄]SbCl₄ compound.