Investigation of inorganic–organic hybrid materials containing polyoxometalate cluster anions and organic dye cations

Two new ionic-pair salts containing an organic dye cation, i.e. New Fuchsin or Pararosaniline cation, with Keggin-type POMs, [SiW₁₂O₄₀]^4? and [BW₁₂O₄₀]^6?, have been isolated under hydrothermal conditions. [(C₂₂H₂₄N₃)₄][SiW₁₂O₄₀] (1) and [(C₁₉H₁₈N₃)₆][BW₁₂O₄₀] (2) have been characterized by elemental analyses, FT-IR and single crystal X-ray crystallography. Both of these complexes have strong absorption in the visible-light range due to the involvement of the organic dye and both show weak fluorescence emission.     

Liquid-phase synthesis and application of monolithic porous materials based on organic–inorganic hybrid methylsiloxanes, crosslinked polymers and carbons

Our recent progress in porous materials based on organic–inorganic hybrids, organic crosslinked polymers, and carbons is summarized. Flexible aerogels and aerogel-like xerogels with the polymethylsilsesquioxane (PMSQ) composition are obtained using methyltrimethoxysilane (MTMS) as the sole precursor. Preparation process and the flexible mechanical properties of these aerogels/xerogels are overviewed. As the derivative materials, hierarchically macro- and mesoporous PMSQ monoliths and marshmallow-like soft and bendable porous monoliths prepared from dimethyldimethoxysilane /MTMS co-precursors have been obtained. Organic crosslinked polymer monoliths with well-defined macropores are also tailored using gelling systems of vinyl monomers under controlled/living radical polymerization. The obtained polymer monoliths are carbonized and activated into activated carbon monoliths with well-defined pore properties. The activated carbon monoliths exhibit good electrochemical properties as the monolithic electrode. Some possibilities of applications for these porous materials are also discussed.     

Hybrid organic–inorganic sol–gel materials for micro and nanofabrication

In this review hybrid organic–inorganic (HOI) resists as emerging materials alternative to organic polymers for micro and nanolithography are presented and discussed. In particular, results on sol–gel materials belonging to 3-glycidoxypropyltrimethoxysilane based HOI are presented and reviewed, highlighting as various lithographic techniques can be used to pattern their surface and showing examples of micro- and nano-patterned structures achieved with radiation assisted lithography (UV, X-rays and electron beam) or imprint techniques. It will be demonstrated the particular versatility shown by some of these materials, that in some case can be processed with all the lithographic methods herein considered, without any significant modification of their main composition and synthesis procedure. Moreover, results about the investigation of interaction between radiation and HOI materials and thermal treatment will be discussed, as well as possible synthesis strategies and composition modification developed in order to improve efficiency of curing, tailor HOI properties to specific needs (optical properties, resist composition, mechanical stability, etc.) and explore innovative and non conventional patterning techniques. The reported results highlight as these novel materials, thanks to their solution processability and higher performances respect to commercial polymeric resists, allow to use the above mentioned lithographic techniques in a direct patterning process, strongly simplifying conventional technique and reducing their processing time and costs.     

Thermal and optical properties of novel polyurea/silica organic–inorganic hybrid materials

Current optical polymeric materials for advanced fiber laser development are susceptible to degradation due to the heat generated in high power usage. A suitable replacement light stripping material was explored to overcome this problem by examining optical and physical properties such as transmission/absorption, refractive index, thermal conductivity, and thermal stability. The synthesis and characterization of two new polyurea/silica ORMOSILs (ORganically MOdified SILicates) suitable for high temperature (up to 300 °C) optical applications are reported herein. A one-pot, room temperature synthesis is based upon commercially available bis-isocyanates and an amino-silane. These materials exhibit the combined traits of both glass and polymer by displaying optical clarity over a wide range of wavelengths stretching from the edge of the UV (250 nm) to well into the NIR (2,000 nm), refractive indices in the visible spectrum (n = 1.50–1.63), thermal conductivities of 0.26 ± 0.09 W/mK (ORMOSIL-A) and 0.27 ± 0.07 W/mK (ORMOSIL-B), and thermal stabilities up to 300 °C. The hybrid materials were found to be easily processed into films but thick casts (>2 mm) were subject to increased rates of cracking and longer curing times. Although this is typical of sol–gel chemistries, the organic constituents of ORMOSILs reduce this effect as compared to purely inorganic sol–gels. The effect of thermal aging on the materials’ properties will also be presented as well as a comparison of these materials and the current state of the art light stripping material.     

Hybrid organic–inorganic materials on paper: surface and thermo-mechanical properties

In this work a new simple method to improve the bulk properties of paper is presented. Co-polymerization of vinyl functionalised zirconia oxoclusters with vinyl trimethoxysilane was carried out onto paper. The coating process was evaluated also taking into account the specific weight of hybrid polymer left on the paper after one or two deposition steps, and with or without a thermal treatment of curing. The effectiveness of the coating process in consolidating and protecting paper was investigated by measurements with High Temperature Differential Scanning Calorimetry, Dynamical Mechanical Spectroscopy, tensile testing, contact angle, along with Environmental Scanning Electron Microscopy. The coating process does not affect the morphology and appearance of the paper, but modifies its mechanical, surface and thermal properties.     

Synthesis and luminescence behavior of inorganic–organic hybrid materials covalently bound with pyran-containing dyes

A DCM derivative, namely 4-Dicyanomethylene-2-methyl-6-{[4′-(N-hydroxyethyl-N-methyl)amino]styryl}-4H-pyran (DCMH), has been synthesized and covalently incorporated into the inorganic silica network as pendants via a sol–gel process. Molecular structures of the resultants are confirmed by elemental analysis, ¹H NMR, DSC, TGA, FTIR and UV–Vis spectroscopy. Photoluminescence (PL) spectra shows that the emission of DCMH peaked at 625 nm is almost completely quenched in DMF solution with a concentration of 1 × 10⁻⁴ mol/L, however, in hybrid films, the PL intensity enhances obviously with increasing DCMH concentration even at the high loading content of 40 mol%. All the hybrid films exhibit PL emission around 646–650 nm and the peak position reveal little dependence on the concentration of dye, suggesting they can be used as red emissive materials in light-emitting diodes. The relationship between fluorescence lifetime and dye concentration is also investigated by time-resolved PL measurements.     

Biodegradable and biocompatible inorganic–organic hybrid materials. I. Synthesis and characterization

The hydroxyl or vinyl end-groups of linear or three-arm star-shaped poly(ε-caprolactone) (PCL) chains have been derivatized into triethoxysilane groups reactive in the sol-gel process. New transparent hybrid materials that combine tetraethylorthosilicate (TEOS) and PCL known for biodegradability and biocompatibility have accordingly been prepared. The sol-gel process is, however, limited by the early vitrification of the reactive system. However, thermal posttreatment can overcome these diffusional and/or kinetic limitations as assessed by a set of analytical methods. The thermal stability of PCL is improved by incorporation into the silica network. Conversely, the thermal stability of the ceramer depends on the effective PCL content. The extent of PCL incorporation into the silica network depends on PCL molecular weight, number, and reactivity of the PCL functional groups. IR spectroscopy has shown that hydrogen bonding occurs between the ester groups of PCL and residual OH groups of the silicate component. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 2295–2309, 1997     

Enhancement of fluorescence and lasing properties of covalent bridged fluorescent dye in organic–inorganic hybrid materials

Fluorescent dye (DCM-OH) is covalently bridged to organic–inorganic hybrid material to prevent molecular stacking and to get high fluorescence efficiency and laser property. Novel DCM-OH is synthesized to have hydroxyl functional groups and is bridged to trialkoxysilane as a sol–gel precursor. It participates in sol–gel process to synthesize dye-bridged organic–inorganic hybrid material (dye-bridged hybrimer) and solid-state dye laser sample is ready through polymerization. Fluorescence property of dye-bridged hybrimer is compared with DCM-doped hybrimer that is simple mixture of DCM-OH and hybrimer matrix. The covalently bridged structure of hybrimer with DCM-OH prevented the stacking of fluorescent molecules and enhanced concentration stability. The dye-bridged hybrimer shows much higher fluorescence intensity and low color-shift until it reached high concentration in comparison with DCM-doped system. And the proper lasing property is observed in dye-bridged hybrimer samples.     

Heat resistant and transparent organic–inorganic hybrid materials composed of N-allylmaleimide copolymer and random-type SH-modified silsesquioxane

A thermally stable and transparent copolymer (PAED) composed of N-allylmaleimide, N-(2-ethylhexyl)maleimide, and diisobutylene as the repeating units was produced by radical copolymerization in the presence of an azo initiator in chloroform at 60 °C. The thiol–ene reaction between the allyl groups included in the side chain of PAED and the mercapto groups (SH) included in a random-type SH-modified silsesquioxane (SQ) as the crosslinker provided PAED–SQ hybrid materials upon heating. The reaction process for this thermal curing was monitored from the intensity changes of characteristic peaks by IR spectroscopy as well as the gravimetric determination of the isolated insoluble fractions. The thermal, optical, and mechanical properties of the hybrids were investigated. The onset and maximum decomposition temperatures were 322–369 °C and 399–431 °C, respectively. The weight residue at 800 °C was 16–40 wt%, which depended on the amount of the SQ content in the feed. These organic–inorganic hybrid materials were highly transparent and exhibited refractive index of 1.522–1.524 and Abbe number of 40.0–45.8. The tensile test and dynamic mechanical analyses were also carried out to investigate the mechanical properties and the network structures of the hybrids. The addition of triallylisocyanurate (TAIC) to the curing system efficiently improved the conversion of the allyl and SH, leading to the more dense network structure and the higher strength and hardness of the cured hybrids. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 2294–2302     

Effect of modified organic–inorganic hybrid materials on thermal properties of cotton fabrics

Phosphorus-modified siloxanes monomer DOPO-IPDI-AMEO (DIA) was synthesized and characterized by ¹H nuclear magnetic resonance (H NMR), ³¹P NMR, and Fourier transform infrared spectra (FTIR). It hydrolyzed and grew an organic–inorganic hybrid coating on the surface of cotton fabrics via sol–gel process. The conversion of gel reaction was characterized by solid-state ²⁹Si NMR. The effect of the modified organic–inorganic hybrid materials on thermal properties of cotton fabrics was investigated by thermogravimetric (TG) analysis, real time Fourier transform infrared (RT-FTIR), and microscale combustion calorimetry (MCC) experiments. In addition, thermogravimetry-Fourier transform infrared spectra (TG-FTIR) were used to investigate the released degradation products. The characterization information represented that DIA has been prepared successfully. Also the conversion of gel reaction was fairly high. The TG data showed that char residues increased with the addition of the DIA coating. While the peak heat release rate (PHRR) decreased with the presence of the coating in MCC test. Moreover, the flammable degradation products dropped obviously, which can be observed from the data of TG-FTIR.     

Sol–gel derived organic–inorganic hybrid materials: synthesis,characterizations and applications

Organic/inorganic hybrid materials prepared by the sol–gel approach have rapidly become a fascinating new field of research in materials science. The explosion of activity in this area in the past decade has made tremendous progress in both the fundamental understanding of the sol–gel process and the development and applications of new organic/inorganic hybrid materials. Polymer-inorganic nanocomposite present an interesting approach to improve the separation properties of polymer material because they possess properties of both organic and inorganic such as good permeability, selectivity, mechanical strength, and thermal and chemical stability. Composite material derived by combining the sol–gel approach and organic polymers synthesis of hybrid material were the focus area of review It has also been demonstrated in this review that a more complete understanding of their structure–property behavior can be gained by employing many of the standard tools that are utilized for developing similar structure–property relationships of organic polymers. This review article is introductory in nature and gives introduction to composite materials/nanocomposite, their applications and the methods commonly employed for their synthesis and characterization. A brief literature survey on the polysaccharide templated and polysaccharide/protein dual templated synthesis of silica composite materials is also presented in this review article.     

Design and fabrication of single mode rib waveguides using sol–gel derived organic–inorganic hybrid materials

Multi-layer buried rib waveguides were fabricated using sol–gel derived photopatternable organic–inorganic hybrid materials through multi-step spin coating and photolithography. A single mode circular waveguide at 1,550 nm was designed and fabricated using the equivalent refractive index method. Propagation loss in the order of 1.0 dB/cm was measured by cutback method. Waveguide thermal stability and thermo-optic coefficient were investigated using thermogravimetric analysis (TGA) and spectroscopic ellipsometry, respectively. Results suggest that the single mode waveguide can be used to develop thermal optical devices such as thermo-optic switches.     

Self-assembly of functionalized inorganic–organic hybrids

Recent advances on the synthesis and self-assembly of hybrid inorganic–organic materials have been reviewed in terms of the synthetic strategies and emerging techniques, including in-situ self-assembly, template-induced self-assembly, evaporation-induced self-assembly, and layer-by-layer assembly for assembling functional hybrids. The perspectives and outlook on this research topic are given.     

Preparation and characterization of molecularly imprinted organic–inorganic hybrid materials by sol–gel processing for selective recognition of ibuprofen

This work adopted semi-covalent imprinting to prepare molecularly imprinted polymers (MIP) with ibuprofen, a non-steroidal anti-inflammatory drug, as template by sol–gel processing, which is characterized by both the high affinity of covalent binding and the mild operation conditions of non-covalent rebinding. A functional monomer, which was used to synthesize the monomer-imprinted molecule complex, was prepared by multi-step synthesis for the first time. MIP was characterized by Fourier transform IR spectrum and nitrogen adsorption. Thin-layer chromatography separation was used to evaluate the specific molecular recognition ability of MIP. In addition, dynamic and thermodynamic studies on MIP imprinting ibuprofen were undertaken. The results of equilibrium rebinding experiments showed that MIP exhibited good adsorption capacity for ibuprofen. Scatchard analysis illustrated that the template-polymer system shows only one-site binding behavior with a dissociation constant of 1.84 mmol L^?1. Dynamic adsorption exhibited pseudo-second-order kinetics. The positive value of ΔH^θ and the negative values of ΔG^θ demonstrated that the binding system for MIP is endothermic and spontaneous.     

Synthesis and characterizations of new negatively charged organic–inorganic hybrid materials: effect of molecular weight of sol–gel precursor

A series of negatively charged hybrid (organic–inorganic) materials were prepared through sol–gel process. The alkoxysilane-containing sol–gel precursors PEO-[Si(OEt)₃]₂SO₃H were obtained by endcapping polyethylene oxide (PEO) of different molecular weights with 2,4-diisocyanate toluene (TDI), followed by a coupling reaction with phenylaminomethyl triethoxysilane (ND-42) and sulfonation afterwards. The negatively charged precursors were then hydrolyzed and condensed to generate hybrid sol–gel materials, which were characterized by IR, TGA, XRD as well as the conventional ion exchange measurements. The results showed that in the hybrid sol–gel precursors PEO-[Si(OEt)₃]₂SO₃H organic PEO component was incorporated with alkoxysilane-containing ND-42 covalently. As the molecular weight of the precursors increased, thermal stability and cation-exchange capacity of the hybrid material decreased. All the hybrid materials were amorphous and those prepared from higher molecular weight precursors were flexible.     

Structure and surface properties of fluorinated organic–inorganic hybrid films

Fluorinated organic–inorganic hybrid films were prepared by sol–gel process from tridecafluoroctyltriethoxysilane (PFAS), 3-glycidoxypropyltrimethoxysilane, and tetraethoxysilane (TEOS). It has been found that the fluorinated hybrid films possessed fluorinated side chains originating from PFAS as top layer, and silica network as bottom layer, which had very low surface energy and could be used as water repellent functional coatings. The outermost layer of the water-repellent film may be fully covered by the perfluoroalkyl side chains as the molar ratio of PFAS/TEOS increases up to about 0.005:1. The addition of BPA can enhance the cross-link density of fluorinated hybrid films, and make more perfluoroalkyl groups enriching at the coating film-air interface to lower the surface free energy. However, the improvement of the cross-link density of fluorinated hybrid films tends to exhibit brittleness and micro-cracks. Consequently, it can be concluded that a small BPA additive content is preferred for the formation of fluorinated hybrid films with a smooth surface and less detectable cracks.     

Synthesis and properties of organic–inorganic hybrid liquid crystal gels

Organic–inorganic hybrid liquid crystal (LC) gels have been synthesised by the thiol-ene reaction of a multifunctional cyclic siloxane, 1,3,5,7-tetravinyl-1,3,5,7-tetramethylcyclotetrasiloxane (TVMCTS) and alkane dithiols, 1,6-hexanedithiol (HDT) or 1,9-decanedithiol (DDT), in LC matrices, 4-cyano-4?-pentylbiphenyl (5CB) or 4′-n-octyl-4-cyano-biphenyl (8CB). The LC gels were prepared in an isotropic phase at 70°C or mesophases at 25°C using radical initiators. The phase transition temperatures from a mesophase to an isotropic phase of the resulting gels were lower than those of the original LCs. The gels containing 8CB (8CB gels) prepared at 25°C showed two phase transitions: smectic-to-nematic and nematic-to-isotropic transitions. By contrast, the 8CB gels synthesised in the isotropic phase showed only one phase transition from smectic phase directly to isotropic phase. Reaction conversions in the LC gels prepared at 70°C were higher than that in the gels prepared at 25°C. Scanning microscopic light scattering analysis of the LC gels cleared homogeneous small size mesh with a small amount of large defect. Polarisation micrographs of the LC gels showed framed optical textures derived from the LC molecules at room temperature. The LC gels containing more than 90 wt% of LC showed electro-optic response.     

Elastic organic–inorganic hybrid aerogels and xerogels

Novel aerogels and xerogels with methylsilsesquioxane (MSQ, CH₃SiO_1.5) networks have been prepared by a modified sol–gel process using surfactant and urea as a phase-separation inhibitor and as an accelerator for the condensation reaction, respectively. Optimized aerogels dried under a supercritical condition not only showed the similar properties as conventional pure silica aerogels such as high transparency and porosity etc, but also demonstrated outstanding mechanical strength against compression; the aerogel drastically shrank upon loading and then recovered when unloaded, which is called a “spring-back” behavior. On ambient pressure drying, the wet gel also exhibited the similar response against compression stress originated from the capillary pressure, and thus xerogels with the comparative structure and properties to those of corresponding aerogels have also been obtained. This unusual mechanical behavior is attributed to the trifunctional flexible networks of MSQ, low silanol concentration which prevents the irreversible shrinkage, and high concentration of a hydrophobic methyl group directly attached to every silicon atom which helps re-expansion after the temporal shrinkage.