Electroanalysis of tetracycline using nickel-implanted boron-doped diamond thin film electrode applied to flow injection system.

The electrochemical analysis of tetracycline was investigated using nickel-implanted boron-doped diamond thin film electrode by cyclic voltammetry and amperometry with a flow injection system. Cyclic voltammetry was used to study the electrochemical oxidation of tetracycline. Comparison experiments were carried out using as-deposited boron-doped diamond thin film electrode (BDD). Nickel-implanted boron-doped diamond thin film electrode (Ni-DIA) provided well-resolved oxidation irreversible cyclic voltammograms. The current signals were higher than those obtained using the as-deposited BDD electrode. Results using nickel-implanted boron-doped diamond thin film electrode in flow injection system coupled with amperometric detection are presented. The optimum potential for tetracycline was 1.55 V versus Ag/AgCl. The linear range of 1.0 to 100 microM and the detection limit of 10 nM were obtained. In addition, the application for drug formulation was also investigated.     

Synthetic boron-doped carbonado,a new electrode material: synthesis in C–metal–B growth systems aimed at the lowering of the synthesis temperature without loss of electrochemical activity

New electrode material—boron-doped synthetic carbonado (bulk polycrystalline diamond)—was synthesized at high pressures and high temperatures in the C–metal (Co, Ni, or Fe) –B growth systems. The metal borides were used as the growth medium-forming substances for graphite-to-diamond transformation at a temperature of ~?1300 °C and pressure of 8 GPa. For comparison, etalon carbonado-type electrode with nearly limiting concentration of boron in diamond was synthesized by subjecting the mixture of amorphous boron with graphite to much higher temperatures (2200–2500 °C) under the same pressure. Despite the lower content of boron in diamond synthesized in the presence of metal borides, these new boron-doped carbonado electrodes are not inferior to the etalon compact in their electrochemical activity, as judging by the onset potential of anodic chlorine evolution from KCl solution. The presence of metal-containing structural defects in boron-doped diamond matrix is supposed to be responsible for the somewhat enhanced catalytic activity of the electrodes. High-pressure synthesis of bulk metal-modified boron-doped diamond opens a new avenue in the development of superior functional electrode materials.     

Fast electrochemical triple-interface processes at boron-doped diamond electrodes

Two important mechanisms for electron transfer processes at boron-doped diamond electrodes involving the oxidation of tetramethylphenylenediamine (TMPD) dissolved in aqueous solution and the oxidation of tetrahexylphenylenediamine (THPD) deposited in the form of microdroplets and immersed into aqueous eletrolyte solution are reported. For TMPD, the first oxidation step in aqueous solution follows the equation: Remarkably slow heterogeneous kinetics at a H-plasma-treated boron-doped diamond electrode are observed, consistent with a process following a pathway more complex than outer-sphere electron transfer. At the same boron-doped diamond electrode surface a deposit of THPD undergoes facile oxidation following the equation: This oxidation and re-reduction of the deposited liquid material occurs at the triple interface organic droplet|diamond|aqueous electrolyte and is therefore an example of a facile high-current-density process at boron-doped diamond electrodes due to good electrical contact between the deposit and the diamond surface. Received: 3 February 2000 / Accepted: 18 February 2000     

Recent advances on boron doped diamond (BDD) electrode as cathode in organic and inorganic preparative electrotransformations

Although anodic oxidation reactions mediated by boron-doped diamond (BDD) electrodes have been broadly studied, research on cathodic conversion remains still scarce despite the favorable characteristics of this electrode for such application. A detailed survey of the recent literature about processes in which boron-doped diamond electrode has been employed in cathodic reactions is presented, including inorganic species (O₂, CO₂, nitrate, metaborate) and organic compounds (carbonyl, nitro groups and halogenated compounds).     

三种碳基电极材料的电化学性质对比研究(英文)

对硼掺杂纳米金刚石(BDND),硼掺杂微米金刚石(BDMD)和玻碳(GC)电极的电化学性质做了对比研究.利用扫描电子显微镜表征了BDMD和BDND电极,其表面粒子大小分别为1-5μm和20-100nm.利用Raman光谱对两种金刚石薄膜的成分进行了表征,结果表明利用热丝化学气相沉积法得到了高质量的BDND和BDMD薄膜.采用0.5mol·L-1H2SO4溶液测定了三种电极的电化学窗口,BDND和BDMD电极的电化学窗口分别为3.3和3.0V,远比GC电极(2.5V)的要宽.[Fe(CN)6]3-/[Fe(CN)6]4-溶液的循环伏安和交流阻抗测定表明,在BDND、BDMD和GC电极上的峰间距(△Ep)分别为73、92和112mV,且其电子传递电阻(Ret)分别为(98±5)、(260±19)和(400±25)Ω.我们也研究了0.1mmol·L-1双酚A在三种电极上的电化学氧化行为.上述的电化学测定结果表明,两种金刚石电极均比GC电极表现出了更宽的电化学窗口、更好的电化学可逆性质、更快的电子传递速度和更高的电化学稳定性,更为重要的是与BDMD相比BDND的电化学性质有进一步的提高.     

Carbon nanotube and diamond as electrochemical detectors in microchip and conventional capillary electrophoresis

As two important polymorphs of carbon, carbon nanotube (CNT) and diamond have been widely employed as electrode materials for electrochemical sensing. This review focuses on recent advances and the key strategies in the fabrication and application of electrochemical detectors in microchip and conventional capillary electrophoresis (CE) using CNT and boron-doped diamond. The subjects covered include CNT-based electrochemical detectors in microchip CE, CNT-based electrochemical detectors in conventional CE, boron-doped diamond electrochemical detectors in microchip CE, and boron-doped diamond electrochemical detectors in conventional CE. The attractive properties of CNT and boron-doped diamond make them very promising materials for the electrochemical detection in microchip and conventional CE systems and other microfluidic analysis systems.     

Microwave activation of electrochemical processes: enhanced PbO2 electrodeposition, stripping and electrocatalysis

Microwave activation of electrochemical processes has recently been introduced as a new technique for the enhancement and control of processes at electrode|solution (electrolyte) interfaces. This methodology is extended to processes at glassy carbon and boron-doped diamond electrodes. Deposition of both Pb metal and PbO₂ from an aqueous solution of Pb²⁺ (0.1 M HNO₃) are affected by microwave radiation. The formation of PbO₂ on anodically pre-treated boron-doped diamond is demonstrated to change from kinetically sluggish and poorly defined at room temperature to nearly diffusion controlled and well defined in the presence of microwave activation. Calibration of the temperature at the electrode|solution (electrolyte) interface with the Fe^3+/2+ (0.1 M HNO₃) redox system allows the experimentally observed effects to be identified as predominantly thermal in nature and therefore consistent with a localized heating effect at the electrode|solution interface. The microwave-activated deposition of PbO₂ on boron-doped diamond remains facile in the presence of excess oxidizable organic compounds such as ethylene glycol. An increase of the current for the electrocatalytic oxidation of ethylene glycol at PbO₂/boron-doped diamond electrodes in the presence of microwave radiation is observed. Preliminary results suggest that the electrodissolution of solid microparticles of PbO₂ abrasively attached to the surface of a glassy carbon electrode is also enhanced in the presence of microwave radiation. Electronic Publication     

Electrochemical Detection of Clenbuterol in Pig Liver at Pyrrole-DNA Modified Boron-doped Diamond Electrode

Introduction Clenbuterol { 4-amino-[( tert-butylamino) meth-yl]-3,5-dichlorobenzyl alcohol hydrochloride} is aβ-agonist drug[1]. It can improve the ratio of muscle tofat when it is administrated with high doses to ani-mals[2,3]. However, the residues of clenbuterol(CL)are toxic to humans, leading to sickness and possibleheart complication[4]. It has been reported that CL iseasy to accumulate in animal livers.Recently, some analytical methods for the detec-tion of CL, such as HPLC[5], GC…     

Fabrication of Pt nanoparticles-decorated CVD diamond electrode for biosensor applications

An electrochemical biosensor was developed using boron-doped diamond (BDD) as an electrode material. To enhance the electrical performance of the electrode, the BDD electrode was decorated with Pt-nanoparticles (Pt-NPs) by electrochemical deposition. Their morphology according to the applied potentials for the synthesis of Pt-NPs was characterized by SEM. To identify the performance of the electrode modified with Pt-NPs, glucose detection was used as a sample sensing process, and the results were compared with those of a gold electrode and a bare BDD electrode. The electrochemical characteristics of the modified electrode were examined by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The BDD electrode with the Pt-NPs showed higher sensitivity and a lower detection limit than the Au electrode and BDD electrode. The proposed biosensor based on the Pt-NPs decorated BDD electrode showed high sensitivity, a low detection limit, fast direct electron transfer and good stability.     

Reduction of Tetrachloroaurate(III) at Boron-Doped Diamond Electrodes: Gold Deposition Versus Gold Colloid Formation

Tetrachloroaurate(III) dissolved in dilute aqueous aqua regia is electrochemically reduced at boron-doped diamond electrodes to form gold metal. The reduction process is studied by voltammetric, SEM, and XPS techniques. Both the deposition of gold and the anodic stripping process are detected. The ratio of cathodic to anodic charge or stripping efficiency, Q_anodic/Q_cathodic, is shown to depend on the concentration of AuCl and on the pretreatment of the boron-doped diamond electrode surface. Cathodic pretreatment of the boron-doped diamond electrode considerably increases the rate for both deposition and stripping. In the presence of power ultrasound emitted from a glass horn system (24 kHz, 8 Wcm⁻²) the current associated with the reduction of AuCl is considerably enhanced and two components in the mass transport controlled limiting current are identified as (i) the deposition of gold onto the boron-doped diamond and (ii) the formation of colloidal gold.     

Electroanalytical investigation and determination of pefloxacin in pharmaceuticals and serum at boron-doped diamond and glassy carbon electrodes

The anodic behavior and determination of pefloxacin on boron-doped diamond and glassy carbon electrodes were investigated using cyclic, linear sweep, differential pulse and square wave voltammetric techniques. In cyclic voltammetry, pefloxacin shows one main irreversible oxidation peak and additional one irreversible ill-defined wave depending on pH values for both electrodes. The results indicate that the process of pefloxacin is irreversible and diffusion controlled on boron-doped diamond electrode and irreversible but adsorption controlled on glassy carbon electrode. The peak current is found to be linear over the range of concentration 2 × 10⁻⁶ to 2 × 10⁻⁴ M in 0.5 M H₂SO₄ at about +1.20 V (versus Ag/AgCl) for differential pulse and square wave voltammetric technique using boron-doped diamond electrode. The repeatability, reproducibility, precision and accuracy of the methods in all media were investigated. Selectivity, precision and accuracy of the developed methods were also checked by recovery studies. The procedures were successfully applied to the determination of the drug in pharmaceutical dosage forms and humans serum samples with good recovery results. No electroactive interferences from the excipients and endogenous substances were found in the pharmaceutical dosage forms and biological samples, respectively.     

Aligned Pt-diamond core-shell nanowires for electrochemical catalysis

Heavily boron-doped diamond electrode has been applied as a robust substrate for Pt based catalyst. However, by simply applying a planar electrode the effective surface area of the catalyst is limited. In this article we for the first time prepared vertically aligned Pt-diamond core-shell nanowires electrode in a convenient and scalable method (up to 6-inch wafer size). The diamond nanowires are first fabricated with reactive ion etching with metal nanoparticles as etching masks. The following Pt deposition was achieved by DC sputtering. Different amounts of Pt were coated on to the nanowires and the morphology of the core-shell wires is characterized by SEM and TEM. The catalytic oxygen/hydrogen adsorption/desorption response are characterized by cyclic voltammetry. The results show that the active Pt surface area is 23 times higher than a planar Pt electrode, and 4.3 times higher than previously reported on Pt nanoparticles on diamond by electro-deposition. Moreover, this highly active surface is stable even after 1000 full surface oxidation and reduction cycles.     

Electrocatalytic Oxidation of Organic Pollutants on Boron-Doped Diamond and Ti–Ru Oxide Anodes in Sulfate Medium

Electrochemical oxidation for degradation of industrial dye Methyl Orange in aqueous sulfate solutions with various electrocatalytic materials: boron-doped diamond electrode and electrode based on titanium and ruthenium oxides. The influence exerted by the main working parameters of electrolysis (current density, concentration of Methyl Orange, pH) on the discoloration efficiency and on the chemical oxygen demand (COD) was examined. It was shown that an increase in the current density and a decrease in the pollutant concentration improve the process efficiency. However, this leads to an increase in the specific electric energy consumption per unit mass of COD. It was found that the boron-doped diamond electrode is a more efficient electrocatalytic material, compared with electrode based on titanium and ruthenium oxides. At low concentrations of Methyl Orange (<50 mg L^–1), there exists the possibility in principle of using the electrode based on titanium and ruthenium oxides not only for discoloration, but also for making lower the COD level.     

阿昔洛韦在硼掺杂金刚石电极上的电化学行为及其与DNA相互作用的研究

利用硼掺杂金刚石(BDD)电极通过循环伏安法和微分脉冲伏安法研究了阿昔洛韦在0.10 mol/L磷酸盐缓冲溶液(pH 7.4)中的电化学行为及其与DNA的相互作用.与玻碳电极相比,阿昔洛韦在BDD电极上的循环伏安曲线在1.17 V处的氧化峰电流更大,背景电流较低.根据峰电位随溶液pH值和扫描速率的变化趋势考察了阿昔洛韦...     

Electrochemical analysis of d-penicillamine using a boron-doped diamond thin film electrode applied to flow injection system

The electroanalysis of d-penicillamine in 0.1 phosphate buffer (pH 7) was studied at a boron-doped diamond thin film (BDD) electrode using cyclic voltammetry as a function of concentration of analyte and pH of analyte solution. Comparison experiments were performing using a glassy carbon (GC) electrode. The BDD electrode exhibited a well-resolved and irreversible oxidation voltammogram, but the GC electrode provided only an ill-defined response. The BDD electrode provided a linear dynamic range from 0.5 to 10 mM and a detection limit of 25 muM (S/B>/=3) in voltammetric measurement. It was also found that the peak potentials were decreased when the pH of the analyte solution was increased. In addition, penicillamine has been studied by hydrodynamic voltammetry and flow injection analysis with amperometric detection using the BDD electrode. The flow injection analysis results at the diamond electrode indicated a linear dynamic range from 0.5 to 50 muM and a detection limit of 10 nM (S/N approximately 4). The proposed method was applied to determine d-penicillamine in dosage form (capsules), the results obtained in the recovery study (255+/-2.50 mg per tablet) were comparable to those labeled (250 mg per tablet).     

Benzene oxidation at boron-doped diamond anode: An electrochemical-impedance spectroscopy study

Benzene oxidation at boron-doped diamond anode in 1 M KCl aqueous solution is studied by electrochemical-impedance spectroscopy method. The measurements of differential capacitance and anodic current showed that in the ideal polarizability region benzene does not adsorb at the diamond electrode (or its adsorption does not affect the electrode capacitance). At more positive potentials adsorption of an inter-mediate of the benzene oxidation occurs, which partially blocks the electrode surface and results in decrease of anodic current. Analysis of the shape of the complex-plane plots of impedance spectra points out to diffusion of part of the adsorbed intermediate into solution.     

基于纳米结构BDD电极的人体尿酸检测

利用纳米结构硼掺杂金刚石(nBDD)电极的优点对人体尿液中的UA含量进行检测,并与常规玻碳(GC)电极做了比较。检测不同尿样的结果可知,nBDD电极检测的回收率为95.3%～98.4%,GC电极79.6%～87.1%;检测同一尿样的重复性实验得出,nBDD电极上峰电流的相对标准偏差(RSD)为8.0%,GC电极上峰电流的RSD为39%。     

Electrochemical behavior of new electrode material: Compact of boron-doped synthetic diamond

Electrochemical properties of new electrode material—compact of boron-doped synthetic diamond—is studied for the first time. Cylindrical samples 3.5–4 mm in diameter and 2.5 mm in height were obtained by thermobaric processing of graphite–boron carbide mixtures in the diamond thermodynamic stability region (at the pressure of 8–9 GPa and temperature of ~2500 K). Their electrode behavior is studied using cyclic voltammetry and electrochemical impedance spectroscopy techniques. The cyclic voltammograms of the compact samples showed that their electrode characteristics are similar to those of traditional thin-film diamond electrodes obtained by the chemical vapor deposition (CVD) technique. In particular, they demonstrate rather wide potential window, low background current in indifferent electrolytes, and good reproducibility. It can be concluded that the diamond compacts practically are not inferior to the thin-film CVD-diamond electrodes and can serve as indicator electrodes, e.g., in electroanalysis. At the same time their compact form may be a convenience in the designing of electrolyzers and other electrochemical devices.     

金刚石薄膜电化学

金刚石由于其特殊的物理与化学性质,早在几百年前就吸引了人们对它的关注.化学气相沉积(chemical vapor deposition,CVD)法制备的高掺杂硼复合多晶金刚石薄膜,为金刚石薄膜在电化学中的应用开辟了新的领域.作为新型碳素电极材料,高掺杂硼复合多晶金刚石薄膜具有许多目前使用的电极材料所不可比拟的优异特性如:宽电化学势窗,低残留电流,极好的电化学稳定性以及表面不易被污染等.本文综述了高掺杂硼复合多晶金刚石薄膜电极在电化学中的几个重要应用,包括电分析、电合成及电化学法处理废水等.     

SiO-Au法制备硅纳米线

在低真空的CVD系统中直接热蒸发SiO粉末并以金为催化剂在硅衬底上制备出大量长达几十微米的硅纳米线(SiNWs), 通过X 射线衍射谱(XRD)、场发射扫描电子显微镜(FESEM)、透射电子显微镜(TEM)、选区电子衍射仪(SAED)和Raman光谱等技术对硅纳米线进行形貌及结构分析. 实验结果表明, 在不同生长温度下制备得到的硅纳米线质量不同, 其中在700 ℃温区生长的硅线质量最好; 与晶体硅Raman的一级散射特征峰(TO)520.3 cm−1相比, 纳米硅线的Raman特征峰(TO)红移至514.8 cm−1.