Synthesis of mesoporous silica nanobamboo with highly dispersed tungsten carbide nanoparticles

By controlling the interaction between cationic surfactant micelles and ammonium metatungstate during the formation of mesoporous silica structure, highly dispersed tungsten carbide (WC) nanoparticles of 2.0 nm in diameter on mesoporous silica nanospheres were synthesized at lower concentration of ammonium metatungstate. With additional ammonium metatungstate, a novel mesoporous silica nanobamboo structure was formed with bimodal size-distributed WC nanoparticles, in which 2.0 nm WC was homogeneously distributed in nanobamboo's mesoporous silica wall and those with larger diameter (10.0-20.0 nm) were only formed on the nanobamboo's inner surface and at its internodes. The mesoporous silica nanobamboo also had a very high tensile strength due to its bamboo-like structure.     

Synthesis of mesoporous silica materials with ascorbic acid as template via sol-gel process

Mesoporous silica materials with pore diameters of 2-5 nm have been prepared using ascorbic acid as a nonsurfactant template or pore-forming agent in HCl-catalyzed sol-gel reactions of tetraethylorthosilicate,followed by removing the ascorbic acid compound by extraction with ethanol.Characterization results from nitrogen sorption isotherm,powder X-ray diffraction and transmission electron microscopy indicate that the materials have large specific surface areas (e.g.1000 m2/g) and pore volumes (e.g.0.8 cm3/g).The rnesoporosity is arisen from interconnecting disordered wormlike channels and pores with relatively broad size distributions.As the ascorbic acid concentration is increased,the pore diameters and pore volumes of the materials increase.     

Non-surfactant synthesis of mesoporous silica with dye as template

A novel non-suffactant method was described to synthesize mesoporous silica using dye basic fuchsin as template.Chemical reactions were introduced into the formation of mesopores rather than the weak electrostatic or hydrogen-bonding interactions in the traditional surfactant routes.The reactant composition was found to be crucial to the pore structure of objective product.The formation mechanism of mesopore was also proved.     

以L-苯甘氨酸衍生物为模板制备介孔SiO_2纳米空心球

用L-苯甘氨酸合成了L-苯甘氨酸衍生物阳离子两亲化合物,以其自组装体为模板,采用四乙氧基硅烷为硅源,制备了介孔SiO_2空心球.结果表明,制备的介孔SiO_2纳米粒子直径50~200nm,孔径3.8nm左右,孔道成平行排列.     

Synthesis of mesoporous hollow carbon hemispheres as highly efficient Pd electrocatalyst support for ethanol oxidation

The synthesis procedure of the highly mesoporous hollow carbon hemispheres (HCHs) using glucose as carbon source and solid core mesoporous shell silica (SCMSS) as template and the formation mechanism of the HCHs have been presented. The HCHs show an ultrahigh surface area of 1095.59 m² g^?1 and an average mesopore size of 9.38 nm. The hemispherical structure with large mesopores also results in the improvement in the mass transfer and therefore more concentrated ethanol solution can be used to increase the energy density. The additional advantage of the HCHs compared to the hollow carbon spheres is that they can provide the similar surface area at reduced volume. The current densities of ethanol oxidation on Pd nanoparticles supported on HCH (Pd/HCH) electrocatalyst are three times as many as on Pd/C at the same Pd loadings.     

Syntheses of ordered mesoporous silica by new hybrid template

Ordered mesoporous silica with macroscopic shape has been prepared with a hybrid template of gel and poly(ethylene oxide)₁₀₆–poly(propylene oxide)₇₀–poly(ethylene oxide)₁₀₆ (pluronic F127) surfactant, where both water-soluble agar gel and pluronic F127 significantly affect the mesoporous structure and morphology of silica. The thermal analysis revealed the noticeable interaction between agar and F127, which contributes to the formation of homogenous hybrid template. In the hybrid template, agar gel contributed to the maintenance of morphology structure, while F127 was responsible for the formation of ordered porous structure in silica solids.     

Synthesis of aerogel-type mesoporous silica

Aerogel-type silica has been synthesized via precipitation of a hydrogel from liquid glass in the presence of glycerol followed by an extraction treatment with ethanol. Isotherms of low-temperature nitrogen adsorption-desorption by the prepared samples have been measured. It has been shown that the mesopore size distribution becomes more uniform with an increase in the pH of precipitation and the amount of glycerol, as well as after the extraction treatment of both a liquid hydrogel and xerogels dried at 293 and 373 K.     

以手性两亲小分子为模板剂制备介孔二氧化硅纳米空心球

以L-亮氨酸为手性源合成了手性阳离子两亲性小分子化合物L-18Leu6NEtBr,用其自组装体作为模板,氢氧化钠为催化剂,经溶胶-凝胶过程制备出介孔二氧化硅纳米空心球;分析了介孔二氧化硅纳米空心球的尺寸和孔径.结果表明,所制备的二氧化硅空心球直径约100nm;其介孔孔道平行于壳表面,孔径为3.1nm.     

Synthesis of micro/mesoporous silica using poly(ethylene glycol) as a template

Analysis of isotherms of low-temperature nitrogen adsorption-desorption has revealed the formation of a micro/mesoporous structure in silica resulting from the sol-gel transition of SiO₂ in the presence of poly(ethylene glycol)s with different molecular masses used as templates. The specific surface area of pores has been determined by the BET and Langmuir methods; the volume and surface area of micropores have been estimated by the t-plot method; and the surface area and volume of pores, mesopore size distribution, and average pore diameter have been assessed using the Barrett-Joyner-Halenda method.     

A novel green template for the synthesis of mesoporous silica

Mesoporous pure silicas and functionalized silica with a narrow pore size distribution centered at 3.8 nm were prepared by a novel template, amphiphilic dendritic polyglycerol. The resulting silica materials were characterized by electron microscopy; nitrogen adsorption; (1)H, (13)C, and (29)Si solid-state cross-polarization magic-angle spinning NMR spectroscopy. It was shown that the template could be completely removed from the pure and functionalized silica in an environmentally friendly way by means of a simple water extraction procedure. Furthermore, it was shown that these materials could be easily functionalized, for example, by employing aminopropyl groups. Thus, a new environmentally friendly pathway to this fascinating class of silica material has been opened.     

One-step synthesis of a highly active, mesoporous, titanium-containing silica by using bifunctional templating

A highly active, three-dimensional, mesoporous titanosilica, TiTUD-1, with comparable properties to Ti-grafted mesoporous silica MCM-41, has been prepared in a one-step synthesis. A non-surfactant chemical, triethanolamine, was used as a template molecule. Triethanolamine easily forms complexes with titanium alkoxides, yielding titanatrane complexes, which together with free triethanolamine form meso-sized aggregates that template mesopores upon increasing the temperature of the synthesis mixture. Triethanolamine served as both mesopore template and ligand for the titanium complexes, which represent the majority of the catalytic-site precursors. The formation of the silica network and the titanium insertion were followed by a combination of diffuse reflectance UV/ Vis/NIR and FTIR spectroscopy. A titanium-rich phase was obtained on the mesopore surfaces during calcination, allowing for easy accessibility of the reactants to the catalytic sites. TiTUD-1 is about six times more active than framework-substituted Ti-MCM-41 and has similar activity to Ti-grafted MCM-41.     

利用Triton X-100合成介孔二氧化硅及其形貌研究

以非离子型表面活性剂Triton X-100为模板剂,正硅酸乙酯为硅源,合成了介孔二氧化硅分子筛.利用XRD、N2吸附—脱附、SEM、以及TG-DTA对样品进行了表征,结果表明合成的材料具有有序介孔结构、高比表面积及高孔容。同时比较了不同条件下所得产物的形貌结构,并分析了它们的形成机理。     

Synthesis of nanostructured films from template electrodeposition technique

In this report, the use of a simple and versatile technique of templated electrodeposition through colloidal templates to produce nanostructured films of Pt and Au with regular submicron spherical holes arranged in a hexagonal close-packed structure is described. The templates were produced by self assembly of a monodispersed suspension of polystyrene spheres on gold substrates using capillary forces. The self assembly process was modified through the chemical modification of the gold substrate with cysteamine thiol. Films of Pt and Au were prepared by electrochemical deposition through the template. The electrochemical deposition charge and the current time curve were used to control the film height with a precision of approximately 10 nm. The colour of the nanostructured films changed as the film thickness was changed. On the other hand, high surface area of the nanostructured Pt film on top of the gold substrate was calculated using electrochemical cyclic voltammogram. About 55 roughness factor was obtained. SAXS measurements showed strong scattering at low angles indicating the presence of a well-ordered mesostructure.     

Ordered mesoporous platinum@graphitic carbon embedded nanophase as a highly active, stable, and methanol-tolerant oxygen reduction electrocatalyst

Highly ordered mesoporous platinum@graphitic carbon (Pt@GC) composites with well-graphitized carbon frameworks and uniformly dispersed Pt nanoparticles embedded within the carbon pore walls have been rationally designed and synthesized. In this facile method, ordered mesoporous silica impregnated with a variable amount of Pt precursor is adopted as the hard template, followed by carbon deposition through a chemical vapor deposition (CVD) process with methane as a carbon precursor. During the CVD process, in situ reduction of Pt precursor, deposition of carbon, and graphitization can be integrated into a single step. The mesostructure, porosity and Pt content in the final mesoporous Pt@GC composites can be conveniently adjusted over a wide range by controlling the initial loading amount of Pt precursor and the CVD temperature and duration. The integration of high surface area, regular mesopores, graphitic nature of the carbon walls as well as highly dispersed and spatially embedded Pt nanoparticles in the mesoporous Pt@GC composites make them excellent as highly active, extremely stable, and methanol-tolerant electrocatalysts toward the oxygen reduction reaction (ORR). A systematic study by comparing the ORR performance among several carbon supported Pt electrocatalysts suggests the overwhelmingly better performance of the mesoporous Pt@GC composites. The structural, textural, and framework properties of the mesoporous Pt@GC composites are extensively studied and strongly related to their excellent ORR performance. These materials are highly promising for fuel cell applications and the synthesis method is quite applicable for constructing mesoporous graphitized carbon materials with various embedded nanophases.     

介孔分子筛MSU-1的合成

MSU X介孔分子筛具有三维立体交叉排列的蠕虫状孔道结构,有利于客体分子在其孔道内扩散[1]。目前合成MSU X的原料[2 4]TEOS水解速度慢,合成过程较易控制,但价高、易燃、有刺激性。本文采用文献[5 7]法,以水玻璃、A(EO)9为原料,在酸性至近中性的范围里合成了MSU 1介孔分子筛,与TEOS为原料的MSU 1合成进行了比较,考察了pH值和不同类型表面活性剂(脂肪醇聚氧乙烯醚和烷基酚聚氧乙烯醚)对产物结构性质的影响。1　实验部分1 1　试剂和仪器水玻璃(SiO2%≈26、Na2O%≈8),工业级,青岛海洋化工厂生产;脂肪醇聚氧乙烯醚非离子表面活性…     

Synthesis and characterization of highly ordered functional mesoporous silica thin films with positively chargeable -NH2 groups

Highly ordered mesoporous organic-inorganic hybrid silica thin films with covalently bonded, positively chargeable -NH2 terminal groups were synthesized by evaporation induced self-assembly of tetraethoxysilane, 3-aminopropyl-triethoxysilane, and a nonionic surfactant under acid conditions and characterized using TEM, GISAXS, FTIR, SAW-based N2 sorption, and TGA.     

Amino-functionalized SBA-15 type mesoporous silica having nanostructured hexagonal platelet morphology

Amino-functionalized SBA-15 type mesoporous silicas having unique hexagonal platelet morphologies with short channels (100-300 nm) running parallel to the thickness of the nanostructured hexagonal platelet type morphologies have been directly synthesized by co-condensation of aminopropyltriethoxysilane (APTES) and sodium metasilicate as a silica source in the presence of Pluronic P123 triblock copolymer as a structure directing agent.     

Synthesis of dissymmetrical nanoparticles with a new hybrid silica template

An easy, novel route to prepare Janus nanoparticles and nano-bowls with tunable shapes has been developed. This approach uses a new kind of monodisperse vinyl-silica nanoparticles as templates to obtain large amounts of uniform Janus particles and nano-bowls (several grams). The efficient method adopts water-based hydrolysis-condensation and seed-emulsion polymerization. The uniform Janus nanoparticles and nano-bowls will display wide potential applications in many fields, such as: chemical sensors, construction of complex superstructures and nano-bioreactors.     

Hydrothermally stable ordered mesoporous titanosilicates with highly active catalytic sites

Mesoporous titanosilicates (MTS-9) are successfully prepared in strong acidic media by a two-step synthesis. MTS-9 has an ordered hexagonal structure and exhibits superior hydrothermal stability and high catalytic activity for the oxidation of the small molecules of phenol and styrene and also of the bulky molecule of trimethylphenol.     

High-temperature synthesis of highly hydrothermal stable mesoporous silica and Fe-SiO2 using ionic liquid as a template

Mesoporous silicas and Fe-SiO₂ with worm-like structures have been synthesized using a room temperature ionic liquid, 1-hexadecane-3-methylimidazolium bromide, as a template at a high aging temperature (150-190 °C) with the assistance of NaF. The hydrothermal stability of mesoporous silica was effectively improved by increasing the aging temperature and adding NaF to the synthesis gel. High hydrothermally stable mesoporous silica was obtained after being aged at 190 °C in the presence of NaF, which endured the hydrothermal treatment in boiling water at least for 10 d or steam treatment at 600 °C for 6 h. The ultra hydrothermal stability could be attributed to its high degree of polymerization of silicate. Furthermore, highly hydrothermal stable mesoporous Fe-SiO₂ has been synthesized, which still remained its mesostructure after being hydrothermally treated at 100 °C for 12 d or steam-treated at 600 °C for 6 h.