Two-cation competition in ionic-liquid-modified electrolytes for lithium ion batteries

It is a common observation that when ionic liquids are added to electrolytes the performances of lithium ion cells become poor, while the thermal safeties of the electrolytes might be improved. In this study, this behavior is investigated based on the kinetics of ionic diffusion. As a model ionic liquid, we chose butyldimethylimidazolium hexafluorophosphate (BDMIPF(6)). The common solvent was propylene carbonate (PC), and lithium hexafluorophosphate (LiPF(6)) was selected as the lithium conducting salt. Ionic diffusion coefficients are estimated by using a pulsed field gradient NMR technique. From a basic study on the model electrolytes (BDMIPF(6) in PC, LiPF(6) in PC, and BDMIPF(6) + LiPF(6) in PC), it was found that the BDMI(+) from BDMIPF(6) shows larger diffusion coefficients than the Li(+) from LiPF(6). However, the anionic (PF(6)(-)) diffusion coefficients present little difference between the model electrolytes. The higher diffusion coefficient of BDMI(+) than that of Li(+) suggests that the poor C-rate performance of lithium ion cells containing ionic liquids as an electrolyte component can be attributed to the two-cation competition between Li(+) and BDMI(+).     

New lithium salts in electrolytes for lithium-ion batteries (Review)

The properties of electrolyte systems based on standard nonaqueous solvent composed of a mixture of dialkyl and alkylene carbonates and new commercially available lithium salts potentially capable of being an alternative to thermally unstable and chemically active lithium hexafluorophosphate LiPF₆ in the mass production of lithium-ion rechargeable batteries are surveyed. The advantages and drawbacks of electrolytes containing lithium salts alternative to LiPF₆ are discussed. The real prospects of substitution for LiPF₆ in electrolyte solutions aimed at improving the functional characteristics of lithium-ion batteries are assessed. Special attention is drawn to the efficient use of new lithium salts in the cells with electrodes based on materials predominantly used in the current mass production of lithium-ion batteries: grafitic carbon (negative electrode), LiCoO₂, LiMn₂O₄, LiFePO₄, and also solid solutions isostructural to lithium cobaltate with the general composition LiMO₂ (M = Co, Mn, Ni, Al) (positive electrode).     

Sol-gel electrolytes in lithium batteries

This paper presents the results of the thermodynamic calculations of material compatibility along with the results of the experimental studies using lithium aluminosilicate gel electrolyte in lithium batteries. Initially, there were problems with gel monoliths and porous cathodes in the Li solid electrolyte batteries. Better results were obtained through the direct application of thin films of the lithium aluminosilicate gels to the surfaces of dense, sintered oxide cathodes. It was important to maintain extremely low moisture and oxygen levels in the dry glove box during the assembly and testing of the battery, especially when it came to achieving good contact between the sol-gel electrolyte and the lithium metal. Suggestions are given about procedures for further development of the sol-gel electrolyte batteries.     

Nonflammable nonaqueous electrolytes for lithium batteries

As the energy density of state-of-the-art lithium (Li)-ion batteries (LIBs) increases, the safety concern of LIBs using liquid electrolytes is drawing increasing attention. Flammability of electrolytes is a critical link of the overall safety performance of LIBs and Li metal batteries. For this reason, intensive efforts have been devoted to suppressing the flammability of liquid electrolytes. In this short review, the common approaches to reduce the flammability of the nonaqueous liquid electrolytes will be summarized. The advantages and limitations of these approaches will also be discussed.     

Poly(vinylidene fluoride-hexafluoropropylene) (PVdF-HFP) based composite electrolytes for lithium batteries

The composite polymer electrolyte (CPE) membranes, comprising of poly(vinylidene fluoride-hexafluoropropylene) (PVdF-HFP), aluminum oxyhydroxide, (AlO[OH]_n) of two different particle sizes 7 μm/14 nm and LiN(CF₃SO₂)₂ as lithium salt were prepared using solution casting technique. The prepared membranes were subjected to XRD, impedance spectroscopy, compatibility and transport number studies. The incorporation of nanofiller greatly enhanced the ionic conductivity and the compatibility of the composite polymer electrolyte. Also LiCr_0.01Mn_1.99O₄/CPE/Li cells were assembled and their charge-discharge profiles have been made at 70 °C. The film which possesses nanosized filler offered better electrochemical properties than those with micron sized filler. The results are discussed based on Lewis acid-base theory.     

Lithium bis(oxalate)borate crosslinked polymer electrolytes for high-performance lithium batteries

Solid electrolytes play a vital role in solid-state Li secondary batteries,which are promising high-energy storage devices for new-generation electric vehicles.Nevertheless,obtaining a suitable solid electrolyte by a simple and residue-free preparation process,resulting in a stable interface between electrolyte and electrode,is still a great challenge for practical applications.Herein,we report a self-crosslinked polymer electrolyte(SCPE)for high-performance lithium batteries,prepared by a one-step method based on 3-methoxysilyl-terminated polypropylene glycol(SPPG,a liquid oligomer).It is worth noting that lithium bis(oxalate)borate(Li BOB)can react with SPPG to form a crosslinked structure via a curing reaction.This self-formed polymer electrolyte exhibits excellent properties,including high roomtemperature ionic conductivity(2.6×10^-4 S cm^-1),wide electrochemical window(4.7 V),and high Li ion transference number(0.65).The excellent cycling stability(500 cycles,83%)further highlights the improved interfacial stability after the in situ formation of SCPE on the electrode surface.Moreover,this self-formation strategy enhances the safety of the battery under mechanical deformation.Therefore,the present self-crosslinked polymer electrolyte shows great potential for applications in high-performance lithium batteries.     

InP as new anode material for lithium ion batteries

InP thin film has been successfully fabricated by pulsed laser deposition (PLD) and was investigated for its electrochemistry with lithium for the first time. InP thin film presented a large reversible discharge capacity around 620 mAh g^?1. The reversibility of the crystalline structure and electrochemical reaction of InP with lithium were revealed by using ex situ XRD and XPS measurements. The high reversible capacity and stable cycle of InP thin film electrode with low overpotential made it one of the promise energy storage materials for future rechargeable lithium batteries.     

Soft matter lithium salt electrolytes: ion conduction and application to rechargeable batteries

Abstract  

Soft matter provides diverse opportunities for the development of electrolytes for all solid state lithium batteries. Here we review soft matter solid electrolytes for lithium batteriesthat are primarily obtained starting from liquid electrolytic systems. This concept of solid electrolyte synthesis from liquid is significantly different from prevalent approaches. The novelty of our approach is discussed in the light of various fundamental issues and in relation to its application to rechargeable lithium batteries.     

Semi-interpenetrated polymer networks based on modified cellulose and starch as gel polymer electrolytes for high performance lithium ion batteries

Cellulose - Poly(ethylene oxide) (PEO) is one of the most famous polymer electrolytes; however, its low conductivity and capacity have prevented its commercial applications. This study utilizes...     

Soft matter lithium salt electrolytes: ion conduction and application to rechargeable batteries

Abstract  Soft matter provides diverse opportunities for the development of electrolytes for all solid state lithium batteries. Here we review soft matter solid electrolytes for lithium batteriesthat are primarily obtained starting from liquid electrolytic systems. This concept of solid electrolyte synthesis from liquid is significantly different from prevalent approaches. The novelty of our approach is discussed in the light of various fundamental issues and in relation to its application to rechargeable lithium batteries. Graphical abstract   M. Patel and S. K. Das have contributed equally to the work.     

Recent progress in liquid electrolytes for lithium metal batteries

Li metal batteries are revived as the next-generation batteries beyond Li-ion batteries. The Li metal anode can be paired with intercalation-type cathodes LiMO₂ and conversion-type cathodes such as sulfur and oxygen. Then, energy densities of Li/LiMO₂ and Li/S,O₂ batteries can reach 400 Whkg^?1 and more than 500 Whkg^?1, respectively, which surpass that of the state-of-the-art LIB (280 Whkg^?1). However, replacing the intercalation-type graphite anode with the Li metal anode suffers from low coulombic efficiency during repeated Li plating/stripping processes, which leads to short cycle lifetime and potential safety problems. The key solution is to construct a stable and uniform solid electrolyte interphase with high Li⁺ transport and high elastic strength on the Li metal anode. This review summarizes recent progress in improving the solid electrolyte interphase by tailoring liquid electrolytes, a classical but the most convenient and cost-effective strategy.     

Designing composite polymer electrolytes for all-solid-state lithium batteries

Ceramic fast-ion conductors have high ionic conductivities (>10^?4 S cm^?1) but are difficult to process and have poor chemo/mechanical properties at the electrode/electrolyte interfaces. In contrast, polymer electrolytes are pliable and easy to process but suffer from low room-temperature ionic conductivities (≈10^?6-10^?7 S cm^?1). Combining these two elements to form a composite polymer electrolyte is a promising way to enable all-solid-state lithium-metal batteries. The choice of ceramic filler and polymer can be tailored to provide synergistic benefits that overcome the practical shortcomings of the two components. Herein, the fundamentals of Li⁺ conduction through the various phases and interfaces in these materials are discussed as well as the important parameters, beyond the initial choice of polymer and ceramic filler materials that must be considered while designing composite polymer electrolytes. Emphasis is placed on the particle filler engineering and practical fabrication methods as routes toward enhancing the properties of these composites.     

Dilithium bis[(perfluoroalkyl)sulfonyl]diimide salts as electrolytes for rechargeable lithium batteries

A series of four different dilithium salts of structure F₃CSO₂N(Li)SO₂-(CF₂)_x-SO₂N(Li)SO₂CF₃, with x = 2, 4, 6, 8 were synthesized and characterized in polyethylene-oxide-based solid polymer electrolytes. Each salt may be thought of as two bis[(perfluoroalkyl)sulfonyl]imide anions linked together by a perfluoroalkyl chain of a particular length. Taken together, this homologous series provides an opportunity to study the effects of linker chain length and degree of fluorination in dianionic (and ultimately polyanionic) salts on the properties, particularly the conductivity, of the salts in various solvating media. SPEs in polyethylene oxide were characterized using scanning calorimetry, X-ray diffraction, ¹H and ¹⁹F NMR, and electrochemical impedance spectroscopy for SPEs prepared using ethylene-oxide-oxygen-to-lithium (EO:Li) ratios of 10:1 and 30:1. Trends in SPE ionic conductivity with anion structure revealed an unexpected trend whereby ionic conductivity is generally rising with increased length of the perfluoroalkylene linking group in the dianions. This trend could be the result of a decrease in dianion basicity that results in diminished ion pairing and an enhancement in the number of charge carriers with increasing anion fluorine content, thereby increasing ionic conductivity.     

Novel siloxane polymers as polymer electrolytes for high energy density lithium batteries

A variety of disubstituted (double-comb) polysiloxane polymers have been prepared containing linear, branched, and cyclic oligoethyleneoxide units, –(OCH₂CH₂)_n–, in the side chains and as part of the siloxane backbone. Copolymers, using mixtures of linear ethylene oxide side chains, were also synthesized. These polymers were doped with LiN(SO₂CF₃)₂ (LiTFSI, 1) and conductivities of the polymer-salt complexes were determined as a function of temperature and doping level. The maximum conductivity of these polymers at 25 ° C was 2.99 ×10^–4, for a copolymer containing equimolar amounts of side chains with n = 5 and 6.     

High-voltage materials for positive electrodes of lithium ion batteries (review)

The main publications of recent years devoted to functional materials for positive electrodes of rechargeable lithium-ion batteries destined to work at the potential more positive than that of conventional lithiated oxides of cobalt and manganese are considered. The problem of electrolytes stable at these potentials is discussed briefly.     

A pentafluorophenylboron oxalate additive in non-aqueous electrolytes for lithium batteries

A novel compound named pentafluorophenylboron oxalate (PFPBO) has been synthesized. PFPBO has a unique molecular structure containing a boron atom center with electron deficiency and an oxalate group. It is found that when PFPBO is used as additive, the solubility of lithium fluoride (LiF) or lithium oxide (Li₂O, Li₂O₂) in propylene carbonate (PC) and dimethyl carbonate (DMC) solvents can be increased dramatically. The new electrolytes show high ionic conductivity, high lithium ion transference number and good compatibility with LiMn₂O₄ cathode and MCMB anode. PFPBO was synthesized with the designed structure to act as a bi-functional additive: boron-based anion receptor (BBAR) additive and stable solid electrolyte interphase (SEI) formation additive in PC-based electrolytes. The results show it does possess these two desired functionalities.     

Propylene sulfite as film-forming electrolyte additive in lithium ion batteries

Propylene sulfite (PS) has been studied as a film-forming electrolyte additive for use in lithium ion battery electrolytes. Even small amounts in the order of 5 vol.% PS suppress propylene carbonate (PC) co-intercalation into graphite. In addition, a 1 M LiClO₄/PC/PS (95:5 by volume) electrolyte is characterised by a high oxidation stability at a LiMn₂O₄ cathode.     

SnSe2 nanoplate-graphene composites as anode materials for lithium ion batteries

Through a solution approach, SnSe(2) nanoplate-graphene composites were prepared and applied as anode materials in lithium ion batteries, showing promising storage performance superior to SnSe(2) nanoplates or graphene alone.     

SnNi-deposited carbonaceous mesophase spherule as anode material for lithium ion batteries

Carbonaceous mesophase spherule (CMS) is a commercial anode material for rechargeable lithium batteries. A composite anode material of SnNi deposited carbonaceous mesophase spherule was prepared by co-precipitation method. The structural and electrochemical characterization of the SnNi/CMS composite anode material was studied. According to the measurement of its electrochemical characterization, the prepared SnNi/CMS composite anode material shows much better electrochemical performance than CMS. The first discharge capacity of 360 mA h g⁻¹ was obtained for the SnNi/CMS composite anode material, and its discharge capacity maintained at 320–340 mA h g⁻¹ in the following cycles. It indicates that the modification of CMS with SnNi alloy can further improve the intercalation performance of CMS. SnNi/CMS composite material shows a good candidate anode material for the commercial rechargeable lithium batteries.     

Novel tetrapotassium azo diphosphonate (INAZO) as flame retardant for polyurethane adhesives

An inorganic azo diphosphonate (INAZO), (KO)₂(O)P-NN-P(O)(OK)₂·4H₂O, was synthesized and tested as a novel type of flame retardant additive for castor oil and oligomeric methylene diphenyl diisocyanate (PMDI) based two component polyurethane adhesive with or without using dolomite ((CaMg(CO₃)₂) as filler. Flammability according to UL 94 test and performance under forced-flaming conditions (cone calorimeter) were investigated at the additive loadings of 5, 10 and 20 wt %. It was shown that INAZO improves flame retardancy by significantly reducing heat release rate (HRR), maximum average rate of heat emission (MARHE) and total smoke release (TSR) values in comparison to CaMg(CO₃)₂ filled polyurethane adhesives. The macroscopic structure of the sample residues after cone calorimeter measurement was also analysed. The action mechanism of the developed INAZO flame retardant is suggested to be mainly in the condensed phase. UL 94 V-0 rating was achieved in the vertical burning test when 10 wt % loading of INAZO was used, whereas the reference flame retardant ammonium polyphosphate (APP) required a loading of 20 wt % to reach the V-0 classification.